Recherche avancée

Sur d’autres sites (6940)

• cmake installation of x265 for ffmpeg on Cygwin - executable location different from other codecs

  6 mai, par bballdave025

  TL ;DR (with expected vs. real)

  


  For a Cygwin build of ffmpeg, I'm installing x265, and it seems to me that the executable ends up in the wrong place. I'll show some basic directory structure, then I'll show the tree outputs for expected and real, both before and after the cmake installation. For directories where I think this is important, I'll show the outputs before and after the cmake installation.

  


  My question has two parts. I used the following cmake and make commands,

  


  # pwd => $HOME/programs/ffmpeg/ffmpeg_sources/x265/build/linux
PATH="$HOME/programs/ffmpeg/bin:$PATH" \
  cmake -G "Unix Makefiles" \
        -DCMAKE_INSTALL_PREFIX="$HOME/programs/ffmpeg/ffmpeg_build" \
        -DENABLE_SHARED=OFF \
        -DCMAKE_EXE_LINKER_FLAGS="-static" 
            ../../source
PATH="$HOME/programs/ffmpeg/bin:$PATH" make -j $(nproc)
make install


  


  The result is below, with my real vs. expected, and there is a more detailed, more explicit, and hopefully more clear file with the info. at pastebin.com/86wHrtxR.

  


  Edit : I've made a copy of the detailed/explicit/clear file on my GitHub as a gist. This should be more secure. (The Pastebin version still exists, in case that is your preference.)

  


  Now, for my two-part question :

  


  


  1. How can I change my cmake command so that my x265.exe file ends up in $HOME/programs/ffmpeg/bin with the proper linking, rather than $HOME/programs/ffmpeg/ffmpeg_build/bin ?

     


  


  2. Would the build/linker/whatever figure things out for the ffmpeg build ?

     


  


  


  I want to know the answer to question number 1 regardless of the answer to question number 2. I haven't used cmake with the -DVAR=var flags before, and I'd like to take this opportunity to learn.

  


  For the result :

  


  Things surrounded by double curly brackets are {{ expected }}.

  


  Things surrounded by double angle brackets are << real >>, i.e. they exist after the installation is done.

  


  If real matches expected, and the file/directory is new, I've surrounded it by double parentheses, i.e. double round brackets. (( match ))

  


  If something is not new (and thus has the same before and after) I haven't marked it.

  


     me@MACHINE ~/programs/ffmpeg&#xA;   $ tree --charset=ascii bin&#xA;   bin&#xA;   |-- lame.exe&#xA;   |-- mp3rtp.exe&#xA;   |-- mp3x.exe&#xA;   `-- x264.exe&#xA;{{ `-- x265.exe                     }} ## Expected, not Exists&#xA;&#xA;   me@MACHINE ~/programs/ffmpeg&#xA;   $ tree --charset=ascii \&#xA;                   ffmpeg_build&#xA;   ffmpeg_build&#xA;&lt;&lt; |-- bin                          >> ## Not expected, Exists&#xA;&lt;&lt; |   `-- x265.exe                 >> ## Not expected, Exists&#xA;   |-- include&#xA;   |   |-- fdk-aac&#xA;   |   |   |-- aacdecoder_lib.h&#xA;   |   |   |-- aacenc_lib.h&#xA;   |   |   `-- ... <more files="files">&#xA;   |   |-- lame&#xA;   |   |   `-- lame.h&#xA;   |   |-- x264.h&#xA;   |   `-- x264_config.h&#xA;(( |   |-- x265.h                   )) ## Expected and Exists&#xA;(( |   `-- x265_config.h            )) ## Expected and Exists&#xA;   |-- lib&#xA;   |   |-- libfdk-aac.a&#xA;   |   |-- libfdk-aac.la&#xA;   |   |-- libmp3lame.a&#xA;   |   |-- libmp3lame.la&#xA;(( |   |-- libx265.a                )) ## Expected and Exists&#xA;   |   `-- pkgconfig&#xA;   |       |-- fdk-aac.pc&#xA;   |       `-- x264.pc&#xA;(( |       `-- x265.pc              )) ## Expected and Exists&#xA;   `-- share&#xA;       |-- doc&#xA;       |   ... <only lame="lame">&#xA;       `-- man&#xA;           ... <only lame="lame">&#xA;</only></only></more>

  


  Other, possibly useful information about the build directory structure.

  


  me@MACHINE ~/programs/ffmpeg
$ tree --charset=ascii -L 1 .
.
|-- bin
|-- ffmpeg_build
`-- ffmpeg_sources

3 directories, 0 files


  


  For this next, ffmpeg_sources dir, I'm showing the after (which is both expected and real/exists) surrounded by double parentheses, i.e. double round brackets, (( <after> ))</after>.

  


     me@MACHINE ~/programs/ffmpeg
   $ tree --charset=ascii -L 1 ffmpeg_sources
   ffmpeg_sources
   |-- fdk-aac.zip
   |-- lame-svn
   |-- mstorsjo-fdk-aac-e7d8591
   |-- x264-snapshot-20191217-2245
   |-- x264-snapshot-20191217-2245.tar.bz2
   `-- x264-snapshot-20191218-README.txt
(( `-- x265                         ))

   3 directories, 3 files
(( 4 directories, 3 files ))


  


  ---

  


  NOW, FOR SOME MORE DETAIL

  


  ---

  


  What I'm Doing

  


  I am working on a Cygwin build (vs. a Windows/mingw build) of ffmpeg. I am following an older guide by koohiimaster (archived). That guide says,

  


  


  [W]e are not cross-compiling for windows ; we are compiling for Cygwin.

  


  


  This 2014 guide doesn't have all of the codecs I want - I want as complete a build as possible - so I've also been referring to this ffmpeg-for-Ubuntu guide (archived), which I hope is kept up-to-date. It's referred to by koohiimaster.

  


  Also, as a way of checking that I'm getting all the codecs I want, I've been looking at this FFmpeg for Windows guide from SuperUser

  


  I'll give the basics of my steps below. More details, as well as all the output is at pastebin.com/suL1nU6Z.

  


  Edit : I've put the log of terminal input/output for all my steps into a gist at my GitHub as this seems safer than Pastebin.

  


  A look at directory structure for the build

  


  me@MACHINE ~/programs/ffmpeg
$ cd $HOME/programs/ffmpeg

me@MACHINE ~/programs/ffmpeg
$ tree --charset=ascii -d -L 1
.
|-- bin
|-- ffmpeg_build
`-- ffmpeg_sources

3 directories


  


  Getting the source. Note that I had to apt-cyg install mercurial, though (with my Cygwin setup GUI/EXE in my Cygwin root directory, i.e. C:\cygwin64\setup-x86_64.exe), I could also have done /setup-x86_64.exe install -q -P mercurial.

  


  cd ffmpeg_sources
hg clone https://bitbucket.org/multicoreware/x265


  


  Running the cmake and make commands

  


  cd x265/build/linux
PATH="$HOME/programs/ffmpeg/bin:$PATH" \
  cmake -G "Unix Makefiles" \
        -DCMAKE_INSTALL_PREFIX="$HOME/programs/ffmpeg/ffmpeg_build" \
        -DENABLE_SHARED=OFF \
        -DCMAKE_EXE_LINKER_FLAGS="-static" \
            ../../source
PATH="$HOME/programs/ffmpeg/bin:$PATH" make -j $(nproc)
make install


  


  It was the last part (actually the very last line) of the make install output that worried me. Here is the whole output - it's not very long.

  


  make[1]: Entering directory '/home/me/programs/ffmpeg/ffmpeg_sources/x265/build/linux'
make[2]: Entering directory '/home/me/programs/ffmpeg/ffmpeg_sources/x265/build/linux'
make[2]: Leaving directory '/home/me/programs/ffmpeg/ffmpeg_sources/x265/build/linux'
[ 20%] Built target encoder
make[2]: Entering directory '/home/me/programs/ffmpeg/ffmpeg_sources/x265/build/linux'
make[2]: Leaving directory '/home/me/programs/ffmpeg/ffmpeg_sources/x265/build/linux'
[ 83%] Built target common
make[2]: Entering directory '/home/me/programs/ffmpeg/ffmpeg_sources/x265/build/linux'
make[2]: Leaving directory '/home/me/programs/ffmpeg/ffmpeg_sources/x265/build/linux'
[ 84%] Built target x265-static
make[2]: Entering directory '/home/me/programs/ffmpeg/ffmpeg_sources/x265/build/linux'
make[2]: Leaving directory '/home/me/programs/ffmpeg/ffmpeg_sources/x265/build/linux'
[100%] Built target cli
make[1]: Leaving directory '/home/me/programs/ffmpeg/ffmpeg_sources/x265/build/linux'
Install the project...
-- Install configuration: "Release"
-- Installing: /home/me/programs/ffmpeg/ffmpeg_build/lib/libx265.a
-- Installing: /home/me/programs/ffmpeg/ffmpeg_build/include/x265.h
-- Installing: /home/me/programs/ffmpeg/ffmpeg_build/include/x265_config.h
-- Installing: /home/me/programs/ffmpeg/ffmpeg_build/lib/pkgconfig/x265.pc
-- Installing: /home/me/programs/ffmpeg/ffmpeg_build/bin/x265.exe


  


  As discussed in the TL ;DR section, I expected to see x265.exe at

  


  home/me/programs/ffmpeg/bin/x265.exe

  


  rather than the path given on the last line of output,

  


  /home/me/programs/ffmpeg/ffmpeg_build/bin/x265.exe

  


  This worries me especially because the first part of the ffmpeg install command that my instructions inform me to run is

  


  PATH="$HOME/programs/ffmpeg/bin:$PATH" \
PKG_CONFIG_PATH="$HOME/programs/ffmpeg/ffmpeg_build/lib/pkgconfig" \
  ./configure \
    --prefix="$HOME/programs/ffmpeg/ffmpeg_build" \
    --extra-cflags="-I$HOME/programs/ffmpeg/ffmpeg_build/include" \
    --extra-ldflags="-L$HOME/programs/ffmpeg/ffmpeg_build/lib" \
    --bindir="$HOME/programs/ffmpeg/bin" \


  


     ... and on it goes ...

  


  It would seem to me that the .configure script for ffmpeg won't find the x265 executable, since it's not in the bindir.

  


  I'll repeat my two-part question from before :

  


  

  1. How can I change my cmake command so that my x265.exe file ends up in $HOME/programs/ffmpeg/bin with the proper linking, rather than $HOME/programs/ffmpeg/ffmpeg_build/bin ?

  


  


  What I'm looking for here is something akin to the --bindir flag from make's ./confiure.

  


  

  2. Would the build/linker/whatever figure things out for the ffmpeg build ?

  


  


  I want to know the answer to question number 1 regardless of the answer to question number 2. I haven't used cmake with the -DVAR=var flags before, and I'd like to take this opportunity to learn.

  


  ---

  


  Where I've Looked & What I've Tried

  


  I first started with the man page and the --help for cmake. That was scary. I was hoping that I'd find something useful around the CMAKE_INSTALL_PREFIX stuff, but I wasn't sure what to make of it.

  


  I tried greping through cmake --help-full (with 50 lines before and after whatever I was searching for), but got tripped up by the complexity. I've only used basic cmake stuff, before, and I got more than a little lost.

  


  Even with the --help, I don't know if I need to look at the help-manual, the help-command, the help-module, the help-policy, the help-variable, or something else.

  


  It seemed to me, in reading, that a "binary directory" is the top of the "build", whereas I thought it would be the dir named bin ... I couldn't tell what things were meant to be used by the person creating the package rather than by me, who am trying to make/build the package from the command line.

  


  I looked through what seemed to be a cmake wiki's Useful Variables page (archived), as well as at this thread at cmake.org (archived), which, along with this SO source and this and this and this and this SO sources, seemed to suggest using the CMAKE_RUNTIME_OUTPUT_DIRECTORY variable (since the EXECUTABLE_OUTPUT-DIRECTORY variable has been superseded by it). By the way, I couldn't tell which things should be used by the creator of the package vs. the consumer of the package - the consumer being me. I tried with

  


  PATH="$HOME/programs/ffmpeg/bin:$PATH" \
  cmake -G "Unix Makefiles" \
        -DCMAKE_INSTALL_PREFIX="$HOME/programs/ffmpeg/ffmpeg_build" \
        -DCMAKE_RUNTIME_OUTPUT_DIRECTORY="$HOME/programs/ffmpeg/bin" \
        -DENABLE_SHARED=OFF \
        -DCMAKE_EXE_LINKER_FLAGS="-static" 
            ../../source
PATH="$HOME/


  


  and have thought about fifty-or-so other -DVAR variables, but with any I have tried, I still get the same result. I still get the executable in what seems to be the wrong place.

  


  ---

  


  System Details

  


  $ date && date +'%s'
Tue, May  5, 2020 11:14:40 AM
1588698880
$ uname -a
CYGWIN_NT-10.0 MACHINE 3.1.4(0.340/5/3) 2020-02-19 08:49 x86_64 Cygwin
$ cmake --version
cmake version 3.14.5

CMake suite maintained and supported by Kitware (kitware.com/cmake).
$ bash --version | head -n 1
GNU bash, version 4.4.12(3)-release (x86_64-unknown-cygwin)
$ gcc --version | head -n 1
gcc (GCC) 9.3.0
$ g++ --version | head -n 1
g++ (GCC) 9.3.0
$ make --version | head -n 2
GNU Make 4.3
Built for x86_64-pc-cygwin


  


• Electron and ffplay / ffmpeg to watch h264

  21 novembre 2017, par Dmitry

  Is it possible to render output from ffmpeg process in Electron or Browser app ?

  I know ffmpeg was bundled to Electron package for some reason. The main goal is to get rtsp stream from LAN video source without convertion it but it will be enough for me if anyone show me basic example of getting video(and audio) from ffmpeg and render it. Thanks.

• Merging audio and video using ffmpeg in python

  11 juin 2022, par Dairop

  I am trying to merge two files (.mp3 & .mp4) to a single .mp4

  


  The videos and audio are located in the same folder as my main.py, and aren't corrupted

  


  Here is the code that seems to create the error :

  


      if (haveAudio):
        infile1 = ffmpeg.input(title+"_video.mp4")
        infile2 = ffmpeg.input(title+"_audio.mp3")

        merged  = ffmpeg.concat(infile1, infile2, v=1, a=1)
        output  = ffmpeg.output(merged[0], merged[1], title+".mp4")



  


  I am getting an error on the last line :

  


  Traceback (most recent call last):&#xA;  File "C:\Users\...\projectName\main.py", line 67, in <module>&#xA;    output  = ffmpeg.output(merged[0], merged[1], title&#x2B;".mp4")&#xA;  File "C:\Users\...\Python\Python39\lib\site-packages\ffmpeg\nodes.py", line 70, in __getitem__&#xA;    raise TypeError("Expected string index (e.g. &#x27;a&#x27;); got {!r}".format(index))&#xA;TypeError: Expected string index (e.g. &#x27;a&#x27;); got 0&#xA;</module>

  


  My guess would be that an argument is missing when calling ffmpeg.output() but based on the documentation it seems correct.