
Recherche avancée
Médias (91)
-
Head down (wav version)
26 septembre 2011, par
Mis à jour : Avril 2013
Langue : English
Type : Audio
-
Echoplex (wav version)
26 septembre 2011, par
Mis à jour : Avril 2013
Langue : English
Type : Audio
-
Discipline (wav version)
26 septembre 2011, par
Mis à jour : Avril 2013
Langue : English
Type : Audio
-
Letting you (wav version)
26 septembre 2011, par
Mis à jour : Avril 2013
Langue : English
Type : Audio
-
1 000 000 (wav version)
26 septembre 2011, par
Mis à jour : Avril 2013
Langue : English
Type : Audio
-
999 999 (wav version)
26 septembre 2011, par
Mis à jour : Avril 2013
Langue : English
Type : Audio
Autres articles (44)
-
Changer son thème graphique
22 février 2011, parLe thème graphique ne touche pas à la disposition à proprement dite des éléments dans la page. Il ne fait que modifier l’apparence des éléments.
Le placement peut être modifié effectivement, mais cette modification n’est que visuelle et non pas au niveau de la représentation sémantique de la page.
Modifier le thème graphique utilisé
Pour modifier le thème graphique utilisé, il est nécessaire que le plugin zen-garden soit activé sur le site.
Il suffit ensuite de se rendre dans l’espace de configuration du (...) -
Les autorisations surchargées par les plugins
27 avril 2010, parMediaspip core
autoriser_auteur_modifier() afin que les visiteurs soient capables de modifier leurs informations sur la page d’auteurs -
Ajouter notes et légendes aux images
7 février 2011, parPour pouvoir ajouter notes et légendes aux images, la première étape est d’installer le plugin "Légendes".
Une fois le plugin activé, vous pouvez le configurer dans l’espace de configuration afin de modifier les droits de création / modification et de suppression des notes. Par défaut seuls les administrateurs du site peuvent ajouter des notes aux images.
Modification lors de l’ajout d’un média
Lors de l’ajout d’un média de type "image" un nouveau bouton apparait au dessus de la prévisualisation (...)
Sur d’autres sites (6575)
-
FFMpeg and WebM/VP8
25 novembre 2011, par Anand SureshI am trying to use ffmpeg and ffserver to stream VP8 video.
I am using the following command to start FFMpeg :
ffmpeg -v 9 -loglevel 99 -f x11grab -s 1440x900 -r2 -i :0.0 -f webm http://localhost:8090/feed1.ffm
The above command abruptly terminates generating the following error :
> FFmpeg version 0.6.2-4:0.6.2-1ubuntu1.1, Copyright (c) 2000-2010 the Libav developers
built on Sep 16 2011 16:57:46 with gcc 4.5.2
configuration: --extra-version=4:0.6.2-1ubuntu1.1 --prefix=/usr --enable-avfilter --enable-avfilter-lavf --enable-vdpau --enable-bzlib --enable-libgsm --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-pthreads --enable-zlib --enable-libvpx --disable-stripping --enable-runtime-cpudetect --enable-vaapi --enable-gpl --enable-postproc --enable-swscale --enable-x11grab --enable-libdc1394 --enable-shared --disable-static
WARNING: library configuration mismatch
libavutil configuration: --extra-version=4:0.6.2-1ubuntu1.1 --prefix=/usr --enable-avfilter --enable-avfilter-lavf --enable-vdpau --enable-bzlib --enable-libgsm --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-pthreads --enable-zlib --enable-libvpx --disable-stripping --enable-runtime-cpudetect --enable-vaapi --enable-gpl --enable-postproc --enable-swscale --enable-x11grab --enable-libdc1394 --shlibdir=/usr/lib/i686/cmov --cpu=i686 --enable-shared --disable-static --disable-ffmpeg --disable-ffplay
libavcodec configuration: --extra-version=4:0.6.2-1ubuntu1.1 --prefix=/usr --enable-avfilter --enable-avfilter-lavf --enable-vdpau --enable-bzlib --enable-libgsm --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-pthreads --enable-zlib --enable-libvpx --disable-stripping --enable-runtime-cpudetect --enable-vaapi --enable-gpl --enable-postproc --enable-swscale --enable-x11grab --enable-libdc1394 --shlibdir=/usr/lib/i686/cmov --cpu=i686 --enable-shared --disable-static --disable-ffmpeg --disable-ffplay
libavformat configuration: --extra-version=4:0.6.2-1ubuntu1.1 --prefix=/usr --enable-avfilter --enable-avfilter-lavf --enable-vdpau --enable-bzlib --enable-libgsm --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-pthreads --enable-zlib --enable-libvpx --disable-stripping --enable-runtime-cpudetect --enable-vaapi --enable-gpl --enable-postproc --enable-swscale --enable-x11grab --enable-libdc1394 --shlibdir=/usr/lib/i686/cmov --cpu=i686 --enable-shared --disable-static --disable-ffmpeg --disable-ffplay
libavdevice configuration: --extra-version=4:0.6.2-1ubuntu1.1 --prefix=/usr --enable-avfilter --enable-avfilter-lavf --enable-vdpau --enable-bzlib --enable-libgsm --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-pthreads --enable-zlib --enable-libvpx --disable-stripping --enable-runtime-cpudetect --enable-vaapi --enable-gpl --enable-postproc --enable-swscale --enable-x11grab --enable-libdc1394 --shlibdir=/usr/lib/i686/cmov --cpu=i686 --enable-shared --disable-static --disable-ffmpeg --disable-ffplay
libavfilter configuration: --extra-version=4:0.6.2-1ubuntu1.1 --prefix=/usr --enable-avfilter --enable-avfilter-lavf --enable-vdpau --enable-bzlib --enable-libgsm --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-pthreads --enable-zlib --enable-libvpx --disable-stripping --enable-runtime-cpudetect --enable-vaapi --enable-gpl --enable-postproc --enable-swscale --enable-x11grab --enable-libdc1394 --shlibdir=/usr/lib/i686/cmov --cpu=i686 --enable-shared --disable-static --disable-ffmpeg --disable-ffplay
libswscale configuration: --extra-version=4:0.6.2-1ubuntu1.1 --prefix=/usr --enable-avfilter --enable-avfilter-lavf --enable-vdpau --enable-bzlib --enable-libgsm --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-pthreads --enable-zlib --enable-libvpx --disable-stripping --enable-runtime-cpudetect --enable-vaapi --enable-gpl --enable-postproc --enable-swscale --enable-x11grab --enable-libdc1394 --shlibdir=/usr/lib/i686/cmov --cpu=i686 --enable-shared --disable-static --disable-ffmpeg --disable-ffplay
libpostproc configuration: --extra-version=4:0.6.2-1ubuntu1.1 --prefix=/usr --enable-avfilter --enable-avfilter-lavf --enable-vdpau --enable-bzlib --enable-libgsm --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-pthreads --enable-zlib --enable-libvpx --disable-stripping --enable-runtime-cpudetect --enable-vaapi --enable-gpl --enable-postproc --enable-swscale --enable-x11grab --enable-libdc1394 --shlibdir=/usr/lib/i686/cmov --cpu=i686 --enable-shared --disable-static --disable-ffmpeg --disable-ffplay
libavutil 50.15. 1 / 50.15. 1
libavcodec 52.72. 2 / 52.72. 2
libavformat 52.64. 2 / 52.64. 2
libavdevice 52. 2. 0 / 52. 2. 0
libavfilter 1.19. 0 / 1.19. 0
libswscale 0.11. 0 / 0.11. 0
libpostproc 51. 2. 0 / 51. 2. 0
[x11grab @ 0x9869420]device: :0.0 -> display: :0.0 x: 0 y: 0 width: 1440 height: 900
[x11grab @ 0x9869420]shared memory extension found
[x11grab @ 0x9869420]Probe buffer size limit 5000000 reached
[x11grab @ 0x9869420]Estimating duration from bitrate, this may be inaccurate
Input #0, x11grab, from ':0.0':
Duration: N/A, start: 1322253753.374957, bitrate: 41472 kb/s
Stream #0.0, 1, 1/1000000: Video: rawvideo, bgra, 1440x900, 1/1, 41472 kb/s, 1 tbr, 1000k tbn, 1 tbc
[libvpx @ 0x9876540]v0.9.6
[libvpx @ 0x9876540]--enable-pic --enable-shared --disable-install-bins --disable-install-srcs --target=x86-linux-gcc
[libvpx @ 0x9876540]vpx_codec_enc_cfg
[libvpx @ 0x9876540]generic settings
g_usage: 0
g_threads: 0
g_profile: 0
g_w: 320
g_h: 240
g_timebase: {1/30}
g_error_resilient: 0
g_pass: 0
g_lag_in_frames: 0
[libvpx @ 0x9876540]rate control settings
rc_dropframe_thresh: 0
rc_resize_allowed: 0
rc_resize_up_thresh: 60
rc_resize_down_thresh: 30
rc_end_usage: 0
rc_twopass_stats_in: (nil)(0)
rc_target_bitrate: 256
[libvpx @ 0x9876540]quantizer settings
rc_min_quantizer: 4
rc_max_quantizer: 63
[libvpx @ 0x9876540]bitrate tolerance
rc_undershoot_pct: 95
rc_overshoot_pct: 200
[libvpx @ 0x9876540]decoder buffer model
rc_buf_sz: 6000
rc_buf_initial_sz: 4000
rc_buf_optimal_sz: 5000
[libvpx @ 0x9876540]2 pass rate control settings
rc_2pass_vbr_bias_pct: 50
rc_2pass_vbr_minsection_pct: 0
rc_2pass_vbr_maxsection_pct: 400
[libvpx @ 0x9876540]keyframing settings
kf_mode: 1
kf_min_dist: 0
kf_max_dist: 9999
[libvpx @ 0x9876540]
[libvpx @ 0x9876540]vpx_codec_enc_cfg
[libvpx @ 0x9876540]generic settings
g_usage: 0
g_threads: 1
g_profile: 0
g_w: 1440
g_h: 900
g_timebase: {1/1}
g_error_resilient: 0
g_pass: 0
g_lag_in_frames: 0
[libvpx @ 0x9876540]rate control settings
rc_dropframe_thresh: 0
rc_resize_allowed: 0
rc_resize_up_thresh: 60
rc_resize_down_thresh: 30
rc_end_usage: 0
rc_twopass_stats_in: (nil)(0)
rc_target_bitrate: 200
[libvpx @ 0x9876540]quantizer settings
rc_min_quantizer: 1
rc_max_quantizer: 38
[libvpx @ 0x9876540]bitrate tolerance
rc_undershoot_pct: 95
rc_overshoot_pct: 200
[libvpx @ 0x9876540]decoder buffer model
rc_buf_sz: 6000
rc_buf_initial_sz: 4000
rc_buf_optimal_sz: 5000
[libvpx @ 0x9876540]2 pass rate control settings
rc_2pass_vbr_bias_pct: 50
rc_2pass_vbr_minsection_pct: 0
rc_2pass_vbr_maxsection_pct: 400
[libvpx @ 0x9876540]keyframing settings
kf_mode: 1
kf_min_dist: 0
kf_max_dist: 12
[libvpx @ 0x9876540]
[libvpx @ 0x9876540]vpx_codec_control
[libvpx @ 0x9876540] VP8E_SET_CPUUSED: 3
[libvpx @ 0x9876540] VP8E_SET_NOISE_SENSITIVITY: 0
Output #0, webm, to 'http://127.0.0.1:8090/feed1.ffm':
Metadata:
encoder : Lavf52.64.2
Stream #0.0, 0, 1/1000: Video: libvpx, yuv420p, 1440x900, 1/1, q=2-31, 200 kb/s, 1k tbn, 1 tbc
Stream mapping:
Stream #0.0 -> #0.0
Press [q] to stop encoding
[webm @ 0x98753b0]Writing block at offset 15, size 158658, pts 0, dts 0, duration 1000, flags 128
[webm @ 0x98753b0]Starting new cluster at offset 158681 bytes, pts 0Can anyone point out what I am doing wrong here ? Why does ffmpeg die everytime it starts a new cluster ?
Thanks
-
Anomalie #2472 : Compagnon : un bug dans un des boutons de fermeture
2 janvier 2012, par Johan .En effet, c’est ça. Suis bluffé :-) j’avais : suhosin.get.max_value_length = 512 en le passant à 1000, le bug disparaît. Merci !
-
FFMEG dumping a RTSP streaming works on Windows but not in Ubuntu
8 août 2016, par cuentafalsa7I have a camera with a
RTSP
server. When I try to save the streaming, usingFFMPEG
in Windows works ; in Ubuntu,FFMPEG
it doesn’t.The command, in Windows is :
ffmpeg.exe -i "rtsp://192.168.1.10:1236/?videoapi=mc&h264=1000-20-1280-960" -r 20 test.mp4
In Linux :
ffmpeg -i "rtsp://192.168.1.10:1236/?videoapi=mc&h264=1000-20-1280-960" -r 20 test.mp4
The output in Linux is :
$ ffmpeg -i "rtsp://192.168.1.10:1236/?videoapi=mr&h264=1000-20-1280-960" -r 20 test.mp4
ffmpeg version 2.8.6-1ubuntu2 Copyright (c) 2000-2016 the FFmpeg developers
built with gcc 5.3.1 (Ubuntu 5.3.1-11ubuntu1) 20160311
configuration: --prefix=/usr --extra-version=1ubuntu2 --build-suffix=-ffmpeg --toolchain=hardened --libdir=/usr/lib/x86_64-linux-gnu --incdir=/usr/include/x86_64-linux-gnu --cc=cc --cxx=g++ --enable-gpl --enable-shared --disable-stripping --disable-decoder=libopenjpeg --disable-decoder=libschroedinger --enable-avresample --enable-avisynth --enable-gnutls --enable-ladspa --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libmodplug --enable-libmp3lame --enable-libopenjpeg --enable-libopus --enable-libpulse --enable-librtmp --enable-libschroedinger --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxvid --enable-libzvbi --enable-openal --enable-opengl --enable-x11grab --enable-libdc1394 --enable-libiec61883 --enable-libzmq --enable-frei0r --enable-libx264 --enable-libopencv
libavutil 54. 31.100 / 54. 31.100
libavcodec 56. 60.100 / 56. 60.100
libavformat 56. 40.101 / 56. 40.101
libavdevice 56. 4.100 / 56. 4.100
libavfilter 5. 40.101 / 5. 40.101
libavresample 2. 1. 0 / 2. 1. 0
libswscale 3. 1.101 / 3. 1.101
libswresample 1. 2.101 / 1. 2.101
libpostproc 53. 3.100 / 53. 3.100
[rtsp @ 0x1f18340] UDP timeout, retrying with TCP
[rtsp @ 0x1f18340] Nonmatching transport in server reply
[rtsp @ 0x1f18340] Could not find codec parameters for stream 0 (Video: h264, none): unspecified size
Consider increasing the value for the 'analyzeduration' and 'probesize' options
rtsp://192.168.1.10:1236/?videoapi=mr&h264=1000-20-1280-960: could not find codec parameters
Input #0, rtsp, from 'rtsp://192.168.1.10:1236/?videoapi=mr&h264=1000-20-1280-960':
Metadata:
title : Unnamed
comment : N/A
Duration: N/A, bitrate: N/A
Stream #0:0: Video: h264, none, 90k tbr, 90k tbn, 180k tbc
Output #0, mp4, to 'test.mp4':
Output file #0 does not contain any streamThe ffmpeg.exe output is :
>ffmpeg.exe
ffmpeg version N-81300-gce2217b Copyright (c) 2000-2016 the FFmpeg developers
built with gcc 5.4.0 (GCC)
configuration: --enable-gpl --enable-version3 --disable-w32threads --enable-dxva2 --enable-libmfx --enable-nvenc --enable-avisynth --enable-bzlib --enable-lib
ebur128 --enable-fontconfig --enable-frei0r --enable-gnutls --enable-iconv --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libfree
type --enable-libgme --enable-libgsm --enable-libilbc --enable-libmodplug --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-lib
openjpeg --enable-libopus --enable-librtmp --enable-libschroedinger --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libtheora --enable-libtwolame
--enable-libvidstab --enable-libvo-amrwbenc --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx264 --enable-libx265 --enable-
libxavs --enable-libxvid --enable-libzimg --enable-lzma --enable-decklink --enable-zlib
libavutil 55. 28.100 / 55. 28.100
libavcodec 57. 51.100 / 57. 51.100
libavformat 57. 46.100 / 57. 46.100
libavdevice 57. 0.102 / 57. 0.102
libavfilter 6. 50.100 / 6. 50.100
libswscale 4. 1.100 / 4. 1.100
libswresample 2. 1.100 / 2. 1.100
libpostproc 54. 0.100 / 54. 0.100
Hyper fast Audio and Video encoder
usage: ffmpeg [options] [[infile options] -i infile]... {[outfile options] outfile}...
Use -h to get full help or, even better, run 'man ffmpeg'The ffmpeg output in Ubuntu is :
$ ffmpeg
ffmpeg version 2.8.6-1ubuntu2 Copyright (c) 2000-2016 the FFmpeg developers
built with gcc 5.3.1 (Ubuntu 5.3.1-11ubuntu1) 20160311
configuration: --prefix=/usr --extra-version=1ubuntu2 --build-suffix=-ffmpeg --toolchain=hardened --libdir=/usr/lib/x86_64-linux-gnu --incdir=/usr/include/x86_64-linux-gnu --cc=cc --cxx=g++ --enable-gpl --enable-shared --disable-stripping --disable-decoder=libopenjpeg --disable-decoder=libschroedinger --enable-avresample --enable-avisynth --enable-gnutls --enable-ladspa --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libmodplug --enable-libmp3lame --enable-libopenjpeg --enable-libopus --enable-libpulse --enable-librtmp --enable-libschroedinger --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxvid --enable-libzvbi --enable-openal --enable-opengl --enable-x11grab --enable-libdc1394 --enable-libiec61883 --enable-libzmq --enable-frei0r --enable-libx264 --enable-libopencv
libavutil 54. 31.100 / 54. 31.100
libavcodec 56. 60.100 / 56. 60.100
libavformat 56. 40.101 / 56. 40.101
libavdevice 56. 4.100 / 56. 4.100
libavfilter 5. 40.101 / 5. 40.101
libavresample 2. 1. 0 / 2. 1. 0
libswscale 3. 1.101 / 3. 1.101
libswresample 1. 2.101 / 1. 2.101
libpostproc 53. 3.100 / 53. 3.100
Hyper fast Audio and Video encoder
usage: ffmpeg [options] [[infile options] -i infile]... {[outfile options] outfile}...
Use -h to get full help or, even better, run 'man ffmpeg'I’m using Windows 7 64 bits and Ubuntu 16.04.
I have tried to increase the suggested values but didn’t work either.
Any idea, except switching to Windows ?