Recherche avancée

Sur d’autres sites (10191)

• 7 Ecommerce Metrics to Track and Improve in 2024

  12 avril 2024, par Erin

  You can invest hours into market research, create the best ads you’ve ever seen and fine-tune your budgets. But the only way to really know if your digital marketing campaigns move the needle is to track ecommerce metrics.

  It’s time to put your hopes and gut feelings aside and focus on the data. Ecommerce metrics are key performance indicators that can tell you a lot about the performance of a single campaign, a traffic source or your entire marketing efforts. 

  That’s why it’s essential to understand what ecommerce metrics are, key metrics to track and how to improve them. 

  Ready to do all of the above ? Then, let’s get started.

  What are ecommerce metrics ? 

  An ecommerce metric is any metric that helps you understand the effectiveness of your digital marketing efforts and the extent to which users are taking a desired action. Most ecommerce metrics focus on conversions, which could be anything from making a purchase to subscribing to your email list.

  You need to track ecommerce metrics to understand how well your marketing efforts are working. They are essential to helping you run a cost-effective marketing campaign that delivers a return on investment. 

  For example, tracking ecommerce metrics will help you identify whether your digital marketing campaigns are generating a return on investment or whether they are actually losing money. They also help you identify your most effective campaigns and traffic sources. 

  Ecommerce metrics also help you spot opportunities for improvement both in terms of your marketing campaigns and your site’s UX. 

  For instance, you can use ecommerce metrics to track the impact on revenue of A/B tests on your marketing campaigns. Or you can use them to understand how users interact with your website and what, if anything, you can do to make it more engaging.

  What’s the difference between conversion rate and conversion value ?

  The difference between a conversion rate and a conversion value is that the former is a percentage while the latter is a monetary value. 

  There can be confusion between the terms conversion rate and conversion value. Since conversions are core metrics in ecommerce, it’s worth taking a minute to clarify. 

  Conversion rates measure the percentage of people who take a desired action on your website compared to the total number of visitors. If you have 100 visitors and one of them converts, then your conversion rate is 1%. 

  Here’s the formula for calculating your conversion rate :

  Conversion Rate (%) = (Number of conversions / Total number of visitors) × 100

  

  Using the example above :

  Conversion Rate = (1 / 100) × 100 = 1%

  Conversion value is a monetary amount you assign to each conversion. In some cases, this is the price of the product a user purchases. In other conversion events, such as signing up for a free trial, you may wish to assign a hypothetical conversion value. 

  To calculate a hypothetical conversion value, let’s consider that you have estimated the average revenue generated from a paying customer is $300. If the conversion rate from free trial to paying customer is 20%, then the hypothetical conversion value for each free trial signup would be $300 multiplied by 20%, which equals $60. This takes into account the number of free trial users who eventually become paying customers.

  So the formula for hypothetical conversion value looks like this :

  

  Hypothetical conversion value = (Average revenue per paying customer) × (Conversion rate)

  Using the values from our example :

  Hypothetical conversion value = $300 × 20% = $60

  The most important ecommerce metrics and how to track them

  There are dozens of ecommerce metrics you could track, but here are seven of the most important. 

  Conversion rate

  Conversion rate is the percentage of visitors who take a desired action. It is arguably one of the most important ecommerce metrics and a great top-level indicator of the success of your marketing efforts. 

  You can measure the conversion rate of anything, including newsletter signups, ebook downloads, and product purchases, using the following formula :

  

  Conversion rate = (Number of people who took action / Total number of visitors) × 100

  You usually won’t have to manually calculate your conversion rate, though. Almost every web analytics or ad platform will track the conversion rate automatically.

  Matomo, for instance, automatically tracks any conversion you set in the Goals report.

  

  As you can see in the screenshot, your site’s conversions are plotted over a period of time and the conversion rate is tracked below the graph. You can change the time period to see how your conversion rate fluctuates.

  If you want to go even further, track your new visitor conversion rate to see how engaging your site is to first-time visitors. 

  Try Matomo for Free

  Get the web insights you need, without compromising data accuracy.

  Start for free

  No credit card required

  Cost per acquisition

  Cost per acquisition (CPA) is the average cost of acquiring a new user. You can calculate your overall CPA or you can break CPA down by email campaign, traffic source, or any other criteria. 

  Calculate CPA by dividing your total marketing cost by the number of new users you acquire.

  

  CPA = Total marketing cost​ / Number of new users acquired 

  So if your Google Ads campaign costs €1,000 and you acquire 100 new users, your CPA is €10 (1000/100=10).

  It’s important to note that CPA is not the same as customer acquisition cost. Customer acquisition cost considers the number of paying customers. CPA looks at the number of users taking a certain action, like subscribing to a newsletter, making a purchase, or signing up for a free trial.

  Cost per acquisition is a direct measure of your marketing efforts’ effectiveness, especially when comparing CPA to average customer spend and return on ad spend. 

  If your CPA is higher than the average customer spend, your marketing campaign is profitable. If not, then you can look at ways to either increase customer spend or decrease your cost per acquisition.

  Customer lifetime value

  Customer lifetime value (CLV) is the average amount of money a customer will spend with your ecommerce brand over their lifetime. 

  Customer value is the total worth of a customer to your brand based on their purchasing behaviour. To calculate it, multiply the average purchase value by the average number of purchases. For instance, if the average purchase value is €50 and customers make 5 purchases on average, the customer value would be €250.

  Use this formula to calculate customer value :

  

  Customer value = Average purchase value × Average number of purchases

  Then you can calculate customer lifetime value using the following formula :

  

  CLV = Customer value × Average customer lifespan

  In another example, let’s say you have a software company and customers pay you €500 per year for an annual subscription. If the average customer lifespan is 5 years, then the Customer Lifetime Value (CLV) would be €2,500.

  Customer lifetime value = €500 × 5 = €2,500

  Knowing how much potential customers are likely to spend helps you set accurate marketing budgets and optimise the price of your products. 

  Return on investment

  Return on investment (ROI) is the amount of revenue your marketing efforts generate compared to total spend. 

  It’s usually calculated as a percentage using the following formula :

  

  ROI = (Revenue / Total spend) × 100

  If you spend €1,000 on a paid ad campaign and your efforts bring in €5,000, then your ROI is 500% (5,000/1,000 × 100).

  With a web analytics tool like Matomo, you can quickly see the revenue generated from each traffic source and you can drill down further to compare different social media channels, search engines, referral websites and campaigns to get more granular view. 

  

  In the example above in Matomo’s Marketing Attribution feature, we can see that social networks are generating the highest amount of revenue in the year. To calculate ROI, we would need to compare the amount of investment to each channel. 

  Let’s say we invested $1,000 per year in search engine optimisation and content marketing, the return on investment (ROI) stands at approximately 2576%, based on a revenue of $26,763.48 per year. 

  Conversely, for organic social media campaigns, where $5,000 was invested and revenue amounted to $71,180.22 per year, the ROI is approximately 1323%. 

  Despite differences in revenue generation, both channels exhibit significant returns on investment, with SEO and content marketing demonstrating a much higher ROI compared to organic social media campaigns. 

  With that in mind, we might want to consider shifting our marketing budget to focus more on search engine optimisation and content marketing as it’s a greater return on investment.

  Try Matomo for Free

  Get the web insights you need, without compromising data accuracy.

  Start for free

  No credit card required

  Return on ad spend

  Return on ad spend (ROAS) is similar to return on investment, but it measures the profitability of a specific ad or campaign.

  Calculate ROAS using the following formula :

  

  ROAS = Revenue / Ad cost 

  A positive ROAS means you are making money. If you generate €3 for every €1 you spend on advertising, for example, there’s no reason to turn off that campaign. If you only make €1 for every €2 you spend, however, then you need to shut down the campaign or optimise it. 

  Bounce rate

  Bounce rate is the percentage of visitors who leave your site without taking another action. Calculate it using the following formula :

  

  Bounce rate = (Number of visitors who bounce / Total number of visitors) × 100

  Some portion of users will always leave your site immediately, but you should aim to make your bounce rate as low as possible. After all, every customer that bounces is a missed opportunity that you may never get again. 

  You can check the bounce rate for each one of your site’s pages using Matomo’s page analytics report. Web analytics tools like Google Analytics can track bounce rates for online stores also. 

  

  Bounce rate is calculated automatically. You can sort the list of pages by bounce rate allowing you to prioritise your optimisation efforts. 

  Don’t stop there, though. Explore bounce rate further by comparing your mobile bounce rate vs. desktop bounce rate by segmenting your traffic. This will highlight whether your mobile site needs improving. 

  Try Matomo for Free

  Get the web insights you need, without compromising data accuracy.

  Start for free

  No credit card required

  Click-through rate

  Your clickthrough rate (CTR) tells you the number of people who click on your ads as a percentage of total impressions. You can calculate it by dividing the number of clicks your ad gets by the total number of times people see it. 

  So the formula looks like this :

  

  CTR (%) = (Number of clicks / Total impressions​) × 100

  If an ad gets 1,000 impressions and 10 people click on it, then the CTR will be 10/1,000 × 100 = 1%

  You don’t usually need to calculate your clickthrough rate manually, however. Most ad platforms like Google Ads will automatically calculate CTR.

  What is considered a good ecommerce sales conversion rate ?

  This question is so broad it’s almost impossible to answer. The thing is, sales conversion rates vary massively depending on the conversion event and the industry. A good conversion rate in one industry might be terrible in another. 

  That being said, research shows that the average website conversion rate across all industries is 2.35%. Of course, some websites convert much better than this. The same study found that the top 25% of websites across all industries have a conversion rate of 5.31% or higher. 

  How can you improve your conversion rate ?

  Ecommerce metrics don’t just let you track your campaign’s ROI, they help you identify ways to improve your campaign. 

  Use these five tips to start improving your marketing campaign’s conversion rates today :

  Run A/B tests

  The most effective way to improve almost all of the ecommerce metrics you track is to test, test, and test again.

  A/B testing or multivariate testing compares two different versions of the same content, such as a landing page or blog post. Seeing which version performs better can help you squeeze as many conversions as possible from your website and ad campaigns. But only if you test as many things as possible. This should include :

  • Ad placement
  • Ad copy
  • CTAs
  • Headlines
  • Straplines
  • Colours
  • Design

  To create and analyse tests and their results effectively, you’ll need either an A/B testing platform or a web analytics solution like Matomo, which offers one out of the box.

  

  Matomo’s A/B Testing feature makes it easy to create and track tests over time, breaking down each test’s variations by the metrics that matter. It automatically calculates statistical significance, too, meaning you can be sure you’re making a change for the better. 

  Try Matomo for Free

  Get the web insights you need, without compromising data accuracy.

• FFMPEG Output File is Empty Nothing was Encoded (for a Picture) ?

  4 mars 2023, par Sarah Szabo

  I have a strange issue effecting one of my programs that does bulk media conversions using ffmpeg from the command line, however this effects me using it directly from the shell as well :

  


  ffmpeg -i INPUT.mkv -ss 0:30 -y -qscale:v 2 -frames:v 1 -f image2 -huffman optimal "OUTPUT.png"
fails every run with the error message :
Output file is empty, nothing was encoded (check -ss / -t / -frames parameters if used)

  


  This only happens with very specific videos, and seemingly no other videos. File type is usually .webm. These files have been downloaded properly (usually from yt-dlp), and I have tried re-downloading them just to verify their integrity.

  


  One such file from a colleague was : https://www.dropbox.com/s/xkucr2z5ra1p2oh/Triggerheart%20Execlica%20OST%20%28Arrange%29%20-%20Crueltear%20Ending.mkv?dl=0

  


  Is there a subtle issue with the command string ?

  


  Notes :

  


  removing -huffman optimal had no effect

  


  moving -ss to before -i had no effect

  


  removing -f image2 had no effect

  


  Full Log :

  


  sarah@MidnightStarSign:~/Music/Playlists/Indexing/Indexing Temp$ ffmpeg -i Triggerheart\ Execlica\ OST\ \(Arrange\)\ -\ Crueltear\ Ending.mkv -ss 0:30 -y -qscale:v 2 -frames:v 1 -f image2 -huffman optimal "TEST.png"
ffmpeg version n5.1.2 Copyright (c) 2000-2022 the FFmpeg developers
  built with gcc 12.2.0 (GCC)
  configuration: --prefix=/usr --disable-debug --disable-static --disable-stripping --enable-amf --enable-avisynth --enable-cuda-llvm --enable-lto --enable-fontconfig --enable-gmp --enable-gnutls --enable-gpl --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libdav1d --enable-libdrm --enable-libfreetype --enable-libfribidi --enable-libgsm --enable-libiec61883 --enable-libjack --enable-libmfx --enable-libmodplug --enable-libmp3lame --enable-libopencore_amrnb --enable-libopencore_amrwb --enable-libopenjpeg --enable-libopus --enable-libpulse --enable-librav1e --enable-librsvg --enable-libsoxr --enable-libspeex --enable-libsrt --enable-libssh --enable-libsvtav1 --enable-libtheora --enable-libv4l2 --enable-libvidstab --enable-libvmaf --enable-libvorbis --enable-libvpx --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxcb --enable-libxml2 --enable-libxvid --enable-libzimg --enable-nvdec --enable-nvenc --enable-opencl --enable-opengl --enable-shared --enable-version3 --enable-vulkan
  libavutil      57. 28.100 / 57. 28.100
  libavcodec     59. 37.100 / 59. 37.100
  libavformat    59. 27.100 / 59. 27.100
  libavdevice    59.  7.100 / 59.  7.100
  libavfilter     8. 44.100 /  8. 44.100
  libswscale      6.  7.100 /  6.  7.100
  libswresample   4.  7.100 /  4.  7.100
  libpostproc    56.  6.100 / 56.  6.100
[matroska,webm @ 0x55927f484740] Could not find codec parameters for stream 2 (Attachment: none): unknown codec
Consider increasing the value for the 'analyzeduration' (0) and 'probesize' (5000000) options
Input #0, matroska,webm, from 'Triggerheart Execlica OST (Arrange) - Crueltear Ending.mkv':
  Metadata:
    title           : TriggerHeart Exelica PS2 & 360 Arrange ー 16 - Crueltear Ending
    PURL            : https://www.youtube.com/watch?v=zJ0bEa_8xEg
    COMMENT         : https://www.youtube.com/watch?v=zJ0bEa_8xEg
    ARTIST          : VinnyVynce
    DATE            : 20170905
    ENCODER         : Lavf59.27.100
  Duration: 00:00:30.00, start: -0.007000, bitrate: 430 kb/s
  Stream #0:0(eng): Video: vp9 (Profile 0), yuv420p(tv, bt709), 720x720, SAR 1:1 DAR 1:1, 25 fps, 25 tbr, 1k tbn (default)
    Metadata:
      DURATION        : 00:00:29.934000000
  Stream #0:1(eng): Audio: opus, 48000 Hz, stereo, fltp (default)
    Metadata:
      DURATION        : 00:00:30.001000000
  Stream #0:2: Attachment: none
    Metadata:
      filename        : cover.webp
      mimetype        : image/webp
Codec AVOption huffman (Huffman table strategy) specified for output file #0 (TEST.png) has not been used for any stream. The most likely reason is either wrong type (e.g. a video option with no video streams) or that it is a private option of some encoder which was not actually used for any stream.
Stream mapping:
  Stream #0:0 -> #0:0 (vp9 (native) -> png (native))
Press [q] to stop, [?] for help
Output #0, image2, to 'TEST.png':
  Metadata:
    title           : TriggerHeart Exelica PS2 & 360 Arrange ー 16 - Crueltear Ending
    PURL            : https://www.youtube.com/watch?v=zJ0bEa_8xEg
    COMMENT         : https://www.youtube.com/watch?v=zJ0bEa_8xEg
    ARTIST          : VinnyVynce
    DATE            : 20170905
    encoder         : Lavf59.27.100
  Stream #0:0(eng): Video: png, rgb24, 720x720 [SAR 1:1 DAR 1:1], q=2-31, 200 kb/s, 25 fps, 25 tbn (default)
    Metadata:
      DURATION        : 00:00:29.934000000
      encoder         : Lavc59.37.100 png
frame=    0 fps=0.0 q=0.0 Lsize=N/A time=00:00:00.00 bitrate=N/A speed=   0x    
video:0kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: unknown
Output file is empty, nothing was encoded (check -ss / -t / -frames parameters if used)


  


  Manjaro OS System Specs :

  


  System:&#xA;  Kernel: 6.1.12-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 12.2.1&#xA;    parameters: BOOT_IMAGE=/@/boot/vmlinuz-6.1-x86_64&#xA;    root=UUID=f11386cf-342d-47ac-84e6-484b7b2f377d rw rootflags=subvol=@&#xA;    radeon.modeset=1 nvdia-drm.modeset=1 quiet&#xA;    cryptdevice=UUID=059df4b4-5be4-44d6-a23a-de81135eb5b4:luks-disk&#xA;    root=/dev/mapper/luks-disk apparmor=1 security=apparmor&#xA;    resume=/dev/mapper/luks-swap udev.log_priority=3&#xA;  Desktop: KDE Plasma v: 5.26.5 tk: Qt v: 5.15.8 wm: kwin_x11 vt: 1 dm: SDDM&#xA;    Distro: Manjaro Linux base: Arch Linux&#xA;Machine:&#xA;  Type: Desktop Mobo: ASUSTeK model: PRIME X570-PRO v: Rev X.0x&#xA;    serial: <superuser required="required"> UEFI: American Megatrends v: 4408&#xA;    date: 10/27/2022&#xA;Battery:&#xA;  Message: No system battery data found. Is one present?&#xA;Memory:&#xA;  RAM: total: 62.71 GiB used: 27.76 GiB (44.3%)&#xA;  RAM Report: permissions: Unable to run dmidecode. Root privileges required.&#xA;CPU:&#xA;  Info: model: AMD Ryzen 9 5950X bits: 64 type: MT MCP arch: Zen 3&#x2B; gen: 4&#xA;    level: v3 note: check built: 2022 process: TSMC n6 (7nm) family: 0x19 (25)&#xA;    model-id: 0x21 (33) stepping: 0 microcode: 0xA201016&#xA;  Topology: cpus: 1x cores: 16 tpc: 2 threads: 32 smt: enabled cache:&#xA;    L1: 1024 KiB desc: d-16x32 KiB; i-16x32 KiB L2: 8 MiB desc: 16x512 KiB&#xA;    L3: 64 MiB desc: 2x32 MiB&#xA;  Speed (MHz): avg: 4099 high: 4111 min/max: 2200/6358 boost: disabled&#xA;    scaling: driver: acpi-cpufreq governor: schedutil cores: 1: 4099 2: 4095&#xA;    3: 4102 4: 4100 5: 4097 6: 4100 7: 4110 8: 4111 9: 4083 10: 4099 11: 4100&#xA;    12: 4094 13: 4097 14: 4101 15: 4100 16: 4099 17: 4100 18: 4097 19: 4098&#xA;    20: 4095 21: 4100 22: 4099 23: 4099 24: 4105 25: 4098 26: 4100 27: 4100&#xA;    28: 4092 29: 4103 30: 4101 31: 4100 32: 4099 bogomips: 262520&#xA;  Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1&#xA;    bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy&#xA;    constant_tsc cpb cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total&#xA;    cqm_occup_llc cr8_legacy cx16 cx8 de decodeassists erms extapic&#xA;    extd_apicid f16c flushbyasid fma fpu fsgsbase fsrm fxsr fxsr_opt ht&#xA;    hw_pstate ibpb ibrs ibs invpcid irperf lahf_lm lbrv lm mba mca mce&#xA;    misalignsse mmx mmxext monitor movbe msr mtrr mwaitx nonstop_tsc nopl npt&#xA;    nrip_save nx ospke osvw overflow_recov pae pat pausefilter pclmulqdq&#xA;    pdpe1gb perfctr_core perfctr_llc perfctr_nb pfthreshold pge pku pni popcnt&#xA;    pse pse36 rapl rdpid rdpru rdrand rdseed rdt_a rdtscp rep_good sep sha_ni&#xA;    skinit smap smca smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 stibp succor&#xA;    svm svm_lock syscall tce topoext tsc tsc_scale umip v_spec_ctrl&#xA;    v_vmsave_vmload vaes vgif vmcb_clean vme vmmcall vpclmulqdq wbnoinvd wdt&#xA;    x2apic xgetbv1 xsave xsavec xsaveerptr xsaveopt xsaves&#xA;  Vulnerabilities:&#xA;  Type: itlb_multihit status: Not affected&#xA;  Type: l1tf status: Not affected&#xA;  Type: mds status: Not affected&#xA;  Type: meltdown status: Not affected&#xA;  Type: mmio_stale_data status: Not affected&#xA;  Type: retbleed status: Not affected&#xA;  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via&#xA;    prctl&#xA;  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer&#xA;    sanitization&#xA;  Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW,&#xA;    STIBP: always-on, RSB filling, PBRSB-eIBRS: Not affected&#xA;  Type: srbds status: Not affected&#xA;  Type: tsx_async_abort status: Not affected&#xA;Graphics:&#xA;  Device-1: NVIDIA GA104 [GeForce RTX 3070] vendor: ASUSTeK driver: nvidia&#xA;    v: 525.89.02 alternate: nouveau,nvidia_drm non-free: 525.xx&#x2B;&#xA;    status: current (as of 2023-02) arch: Ampere code: GAxxx&#xA;    process: TSMC n7 (7nm) built: 2020-22 pcie: gen: 4 speed: 16 GT/s lanes: 8&#xA;    link-max: lanes: 16 bus-ID: 0b:00.0 chip-ID: 10de:2484 class-ID: 0300&#xA;  Device-2: AMD Cape Verde PRO [Radeon HD 7750/8740 / R7 250E]&#xA;    vendor: VISIONTEK driver: radeon v: kernel alternate: amdgpu arch: GCN-1&#xA;    code: Southern Islands process: TSMC 28nm built: 2011-20 pcie: gen: 3&#xA;    speed: 8 GT/s lanes: 8 link-max: lanes: 16 ports: active: DP-3,DP-4&#xA;    empty: DP-1, DP-2, DP-5, DP-6 bus-ID: 0c:00.0 chip-ID: 1002:683f&#xA;    class-ID: 0300 temp: 54.0 C&#xA;  Device-3: Microdia USB 2.0 Camera type: USB driver: snd-usb-audio,uvcvideo&#xA;    bus-ID: 9-2:3 chip-ID: 0c45:6367 class-ID: 0102 serial: <filter>&#xA;  Display: x11 server: X.Org v: 21.1.7 with: Xwayland v: 22.1.8&#xA;    compositor: kwin_x11 driver: X: loaded: modesetting,nvidia dri: radeonsi&#xA;    gpu: radeon display-ID: :0 screens: 1&#xA;  Screen-1: 0 s-res: 5760x2160 s-dpi: 80 s-size: 1829x686mm (72.01x27.01")&#xA;    s-diag: 1953mm (76.91")&#xA;  Monitor-1: DP-1 pos: 1-2 res: 1920x1080 dpi: 93&#xA;    size: 527x296mm (20.75x11.65") diag: 604mm (23.8") modes: N/A&#xA;  Monitor-2: DP-1-3 pos: 2-1 res: 1920x1080 dpi: 82&#xA;    size: 598x336mm (23.54x13.23") diag: 686mm (27.01") modes: N/A&#xA;  Monitor-3: DP-1-4 pos: 1-1 res: 1920x1080 dpi: 93&#xA;    size: 527x296mm (20.75x11.65") diag: 604mm (23.8") modes: N/A&#xA;  Monitor-4: DP-3 pos: primary,2-2 res: 1920x1080 dpi: 82&#xA;    size: 598x336mm (23.54x13.23") diag: 686mm (27.01") modes: N/A&#xA;  Monitor-5: DP-4 pos: 2-4 res: 1920x1080 dpi: 82&#xA;    size: 598x336mm (23.54x13.23") diag: 686mm (27.01") modes: N/A&#xA;  Monitor-6: HDMI-0 pos: 1-3 res: 1920x1080 dpi: 93&#xA;    size: 527x296mm (20.75x11.65") diag: 604mm (23.8") modes: N/A&#xA;  API: OpenGL v: 4.6.0 NVIDIA 525.89.02 renderer: NVIDIA GeForce RTX&#xA;    3070/PCIe/SSE2 direct-render: Yes&#xA;Audio:&#xA;  Device-1: NVIDIA GA104 High Definition Audio vendor: ASUSTeK&#xA;    driver: snd_hda_intel bus-ID: 5-1:2 v: kernel chip-ID: 30be:1019 pcie:&#xA;    class-ID: 0102 gen: 4 speed: 16 GT/s lanes: 8 link-max: lanes: 16&#xA;    bus-ID: 0b:00.1 chip-ID: 10de:228b class-ID: 0403&#xA;  Device-2: AMD Oland/Hainan/Cape Verde/Pitcairn HDMI Audio [Radeon HD 7000&#xA;    Series] vendor: VISIONTEK driver: snd_hda_intel v: kernel pcie: gen: 3&#xA;    speed: 8 GT/s lanes: 8 link-max: lanes: 16 bus-ID: 0c:00.1&#xA;    chip-ID: 1002:aab0 class-ID: 0403&#xA;  Device-3: AMD Starship/Matisse HD Audio vendor: ASUSTeK&#xA;    driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16&#xA;    bus-ID: 0e:00.4 chip-ID: 1022:1487 class-ID: 0403&#xA;  Device-4: Schiit Audio Unison Universal Dac type: USB driver: snd-usb-audio&#xA;  Device-5: JMTek LLC. Plugable USB Audio Device type: USB&#xA;    driver: hid-generic,snd-usb-audio,usbhid bus-ID: 5-2:3 chip-ID: 0c76:120b&#xA;    class-ID: 0300 serial: <filter>&#xA;  Device-6: ASUSTek ASUS AI Noise-Cancelling Mic Adapter type: USB&#xA;    driver: hid-generic,snd-usb-audio,usbhid bus-ID: 5-4:4 chip-ID: 0b05:194e&#xA;    class-ID: 0300 serial: <filter>&#xA;  Device-7: Microdia USB 2.0 Camera type: USB driver: snd-usb-audio,uvcvideo&#xA;    bus-ID: 9-2:3 chip-ID: 0c45:6367 class-ID: 0102 serial: <filter>&#xA;  Sound API: ALSA v: k6.1.12-1-MANJARO running: yes&#xA;  Sound Interface: sndio v: N/A running: no&#xA;  Sound Server-1: PulseAudio v: 16.1 running: no&#xA;  Sound Server-2: PipeWire v: 0.3.65 running: yes&#xA;Network:&#xA;  Device-1: Intel I211 Gigabit Network vendor: ASUSTeK driver: igb v: kernel&#xA;    pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: f000 bus-ID: 07:00.0&#xA;    chip-ID: 8086:1539 class-ID: 0200&#xA;  IF: enp7s0 state: up speed: 1000 Mbps duplex: full mac: <filter>&#xA;  IP v4: <filter> type: dynamic noprefixroute scope: global&#xA;    broadcast: <filter>&#xA;  IP v6: <filter> type: noprefixroute scope: link&#xA;  IF-ID-1: docker0 state: down mac: <filter>&#xA;  IP v4: <filter> scope: global broadcast: <filter>&#xA;  WAN IP: <filter>&#xA;Bluetooth:&#xA;  Device-1: Cambridge Silicon Radio Bluetooth Dongle (HCI mode) type: USB&#xA;    driver: btusb v: 0.8 bus-ID: 5-5.3:7 chip-ID: 0a12:0001 class-ID: e001&#xA;  Report: rfkill ID: hci0 rfk-id: 0 state: up address: see --recommends&#xA;Logical:&#xA;  Message: No logical block device data found.&#xA;  Device-1: luks-c847cf9f-c6b5-4624-a25e-4531e318851a maj-min: 254:2&#xA;    type: LUKS dm: dm-2 size: 3.64 TiB&#xA;  Components:&#xA;  p-1: sda1 maj-min: 8:1 size: 3.64 TiB&#xA;  Device-2: luks-swap maj-min: 254:1 type: LUKS dm: dm-1 size: 12 GiB&#xA;  Components:&#xA;  p-1: nvme0n1p2 maj-min: 259:2 size: 12 GiB&#xA;  Device-3: luks-disk maj-min: 254:0 type: LUKS dm: dm-0 size: 919.01 GiB&#xA;  Components:&#xA;  p-1: nvme0n1p3 maj-min: 259:3 size: 919.01 GiB&#xA;RAID:&#xA;  Message: No RAID data found.&#xA;Drives:&#xA;  Local Storage: total: 9.1 TiB used: 2.79 TiB (30.6%)&#xA;  SMART Message: Unable to run smartctl. Root privileges required.&#xA;  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Western Digital&#xA;    model: WDS100T3X0C-00SJG0 size: 931.51 GiB block-size: physical: 512 B&#xA;    logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>&#xA;    rev: 111110WD temp: 53.9 C scheme: GPT&#xA;  ID-2: /dev/nvme1n1 maj-min: 259:4 vendor: Western Digital&#xA;    model: WDS100T2B0C-00PXH0 size: 931.51 GiB block-size: physical: 512 B&#xA;    logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>&#xA;    rev: 211070WD temp: 46.9 C scheme: GPT&#xA;  ID-3: /dev/sda maj-min: 8:0 vendor: Western Digital&#xA;    model: WD4005FZBX-00K5WB0 size: 3.64 TiB block-size: physical: 4096 B&#xA;    logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 7200 serial: <filter>&#xA;    rev: 1A01 scheme: GPT&#xA;  ID-4: /dev/sdb maj-min: 8:16 vendor: Western Digital&#xA;    model: WD4005FZBX-00K5WB0 size: 3.64 TiB block-size: physical: 4096 B&#xA;    logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 7200 serial: <filter>&#xA;    rev: 1A01 scheme: GPT&#xA;  ID-5: /dev/sdc maj-min: 8:32 type: USB vendor: SanDisk&#xA;    model: Gaming Xbox 360 size: 7.48 GiB block-size: physical: 512 B&#xA;    logical: 512 B type: N/A serial: <filter> rev: 8.02 scheme: MBR&#xA;  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?&#xA;  Message: No optical or floppy data found.&#xA;Partition:&#xA;  ID-1: / raw-size: 919.01 GiB size: 919.01 GiB (100.00%)&#xA;    used: 611.14 GiB (66.5%) fs: btrfs dev: /dev/dm-0 maj-min: 254:0&#xA;    mapped: luks-disk label: N/A uuid: N/A&#xA;  ID-2: /boot/efi raw-size: 512 MiB size: 511 MiB (99.80%)&#xA;    used: 40.2 MiB (7.9%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1 label: EFI&#xA;    uuid: 8922-E04D&#xA;  ID-3: /home raw-size: 919.01 GiB size: 919.01 GiB (100.00%)&#xA;    used: 611.14 GiB (66.5%) fs: btrfs dev: /dev/dm-0 maj-min: 254:0&#xA;    mapped: luks-disk label: N/A uuid: N/A&#xA;  ID-4: /run/media/sarah/ConvergentRefuge raw-size: 3.64 TiB&#xA;    size: 3.64 TiB (100.00%) used: 2.19 TiB (60.1%) fs: btrfs dev: /dev/dm-2&#xA;    maj-min: 254:2 mapped: luks-c847cf9f-c6b5-4624-a25e-4531e318851a&#xA;    label: ConvergentRefuge uuid: 7d295e73-4143-4eb1-9d22-75a06b1d2984&#xA;  ID-5: /run/media/sarah/MSS_EXtended raw-size: 475.51 GiB&#xA;    size: 475.51 GiB (100.00%) used: 1.48 GiB (0.3%) fs: btrfs&#xA;    dev: /dev/nvme1n1p1 maj-min: 259:5 label: MSS EXtended&#xA;    uuid: f98b3a12-e0e4-48c7-91c2-6e3aa6dcd32c&#xA;Swap:&#xA;  Kernel: swappiness: 60 (default) cache-pressure: 100 (default)&#xA;  ID-1: swap-1 type: partition size: 12 GiB used: 6.86 GiB (57.2%)&#xA;    priority: -2 dev: /dev/dm-1 maj-min: 254:1 mapped: luks-swap label: SWAP&#xA;    uuid: c8991364-85a7-4e6c-8380-49cd5bd7a873&#xA;Unmounted:&#xA;  ID-1: /dev/nvme1n1p2 maj-min: 259:6 size: 456 GiB fs: ntfs label: N/A&#xA;    uuid: 5ECA358FCA356485&#xA;  ID-2: /dev/sdb1 maj-min: 8:17 size: 3.64 TiB fs: ntfs&#xA;    label: JerichoVariance uuid: 1AB22D5664889CBD&#xA;  ID-3: /dev/sdc1 maj-min: 8:33 size: 3.57 GiB fs: iso9660&#xA;  ID-4: /dev/sdc2 maj-min: 8:34 size: 4 MiB fs: vfat label: MISO_EFI&#xA;    uuid: 5C67-4BF8&#xA;USB:&#xA;  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0&#xA;    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900&#xA;  Hub-2: 1-2:2 info: Hitachi ports: 4 rev: 2.1 speed: 480 Mb/s&#xA;    chip-ID: 045b:0209 class-ID: 0900&#xA;  Device-1: 1-2.4:3 info: Microsoft Xbox One Controller (Firmware 2015)&#xA;    type: <vendor specific="specific"> driver: xpad interfaces: 3 rev: 2.0 speed: 12 Mb/s&#xA;    power: 500mA chip-ID: 045e:02dd class-ID: ff00 serial: <filter>&#xA;  Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s&#xA;    chip-ID: 1d6b:0003 class-ID: 0900&#xA;  Hub-4: 2-2:2 info: Hitachi ports: 4 rev: 3.0 speed: 5 Gb/s&#xA;    chip-ID: 045b:0210 class-ID: 0900&#xA;  Hub-5: 3-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0&#xA;    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900&#xA;  Hub-6: 3-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s&#xA;    power: 100mA chip-ID: 2109:3431 class-ID: 0900&#xA;  Hub-7: 3-1.2:3 info: VIA Labs VL813 Hub ports: 4 rev: 2.1 speed: 480 Mb/s&#xA;    chip-ID: 2109:2813 class-ID: 0900&#xA;  Hub-8: 4-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s&#xA;    chip-ID: 1d6b:0003 class-ID: 0900&#xA;  Hub-9: 4-2:2 info: VIA Labs VL813 Hub ports: 4 rev: 3.0 speed: 5 Gb/s&#xA;    chip-ID: 2109:0813 class-ID: 0900&#xA;  Hub-10: 5-0:1 info: Hi-speed hub with single TT ports: 6 rev: 2.0&#xA;    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900&#xA;  Device-1: 5-1:2 info: Schiit Audio Unison Universal Dac type: Audio&#xA;    driver: snd-usb-audio interfaces: 2 rev: 2.0 speed: 480 Mb/s power: 500mA&#xA;    chip-ID: 30be:1019 class-ID: 0102&#xA;  Device-2: 5-2:3 info: JMTek LLC. Plugable USB Audio Device type: Audio,HID&#xA;    driver: hid-generic,snd-usb-audio,usbhid interfaces: 4 rev: 1.1&#xA;    speed: 12 Mb/s power: 100mA chip-ID: 0c76:120b class-ID: 0300&#xA;    serial: <filter>&#xA;  Device-3: 5-4:4 info: ASUSTek ASUS AI Noise-Cancelling Mic Adapter&#xA;    type: Audio,HID driver: hid-generic,snd-usb-audio,usbhid interfaces: 4&#xA;    rev: 1.1 speed: 12 Mb/s power: 100mA chip-ID: 0b05:194e class-ID: 0300&#xA;    serial: <filter>&#xA;  Hub-11: 5-5:5 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s&#xA;    power: 100mA chip-ID: 05e3:0608 class-ID: 0900&#xA;  Device-1: 5-5.3:7 info: Cambridge Silicon Radio Bluetooth Dongle (HCI mode)&#xA;    type: Bluetooth driver: btusb interfaces: 2 rev: 2.0 speed: 12 Mb/s&#xA;    power: 100mA chip-ID: 0a12:0001 class-ID: e001&#xA;  Hub-12: 5-6:6 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s&#xA;    power: 100mA chip-ID: 05e3:0608 class-ID: 0900&#xA;  Hub-13: 6-0:1 info: Super-speed hub ports: 4 rev: 3.1 speed: 10 Gb/s&#xA;    chip-ID: 1d6b:0003 class-ID: 0900&#xA;  Hub-14: 7-0:1 info: Hi-speed hub with single TT ports: 6 rev: 2.0&#xA;    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900&#xA;  Device-1: 7-2:2 info: SanDisk Cruzer Micro Flash Drive type: Mass Storage&#xA;    driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 200mA&#xA;    chip-ID: 0781:5151 class-ID: 0806 serial: <filter>&#xA;  Device-2: 7-4:3 info: ASUSTek AURA LED Controller type: HID&#xA;    driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 16mA&#xA;    chip-ID: 0b05:18f3 class-ID: 0300 serial: <filter>&#xA;  Hub-15: 8-0:1 info: Super-speed hub ports: 4 rev: 3.1 speed: 10 Gb/s&#xA;    chip-ID: 1d6b:0003 class-ID: 0900&#xA;  Hub-16: 9-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0&#xA;    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900&#xA;  Hub-17: 9-1:2 info: Terminus FE 2.1 7-port Hub ports: 7 rev: 2.0&#xA;    speed: 480 Mb/s power: 100mA chip-ID: 1a40:0201 class-ID: 0900&#xA;  Device-1: 9-1.1:4 info: Sunplus Innovation Gaming mouse [Philips SPK9304]&#xA;    type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s&#xA;    power: 98mA chip-ID: 1bcf:08a0 class-ID: 0301&#xA;  Device-2: 9-1.5:6 info: Microdia Backlit Gaming Keyboard&#xA;    type: Keyboard,Mouse driver: hid-generic,usbhid interfaces: 2 rev: 2.0&#xA;    speed: 12 Mb/s power: 400mA chip-ID: 0c45:652f class-ID: 0301&#xA;  Device-3: 9-1.6:7 info: HUION H420 type: Mouse,HID driver: uclogic,usbhid&#xA;    interfaces: 3 rev: 1.1 speed: 12 Mb/s power: 100mA chip-ID: 256c:006e&#xA;    class-ID: 0300&#xA;  Hub-18: 9-1.7:8 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s&#xA;    power: 100mA chip-ID: 1a40:0101 class-ID: 0900&#xA;  Device-1: 9-2:3 info: Microdia USB 2.0 Camera type: Video,Audio&#xA;    driver: snd-usb-audio,uvcvideo interfaces: 4 rev: 2.0 speed: 480 Mb/s&#xA;    power: 500mA chip-ID: 0c45:6367 class-ID: 0102 serial: <filter>&#xA;  Device-2: 9-4:11 info: VKB-Sim &#xA9; Alex Oz 2021 VKBsim Gladiator EVO L&#xA;    type: HID driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 12 Mb/s&#xA;    power: 500mA chip-ID: 231d:0201 class-ID: 0300&#xA;  Hub-19: 10-0:1 info: Super-speed hub ports: 4 rev: 3.1 speed: 10 Gb/s&#xA;    chip-ID: 1d6b:0003 class-ID: 0900&#xA;Sensors:&#xA;  System Temperatures: cpu: 38.0 C mobo: 41.0 C&#xA;  Fan Speeds (RPM): fan-1: 702 fan-2: 747 fan-3: 938 fan-4: 889 fan-5: 3132&#xA;    fan-6: 0 fan-7: 0&#xA;  GPU: device: nvidia screen: :0.0 temp: 49 C fan: 0% device: radeon&#xA;    temp: 53.0 C&#xA;Info:&#xA;  Processes: 842 Uptime: 3h 11m wakeups: 0 Init: systemd v: 252&#xA;  default: graphical tool: systemctl Compilers: gcc: 12.2.1 alt: 10/11&#xA;  clang: 15.0.7 Packages: 2158 pm: pacman pkgs: 2110 libs: 495 tools: pamac,yay&#xA;  pm: flatpak pkgs: 31 pm: snap pkgs: 17 Shell: Bash v: 5.1.16&#xA;  running-in: yakuake inxi: 3.3.25&#xA;</filter></filter></filter></filter></filter></filter></vendor></filter></filter></filter></filter></filter></filter></filter></filter></filter></filter></filter></filter></filter></filter></filter></filter></filter></superuser>

  


• Top 5 Customer Segmentation Software in 2024

  12 mars 2024, par Erin

  In marketing, we all know the importance of reaching the right customer with the right message at the right time. That’s how you cut through the noise.

  For that, you need data on your customers — even though gathering the data is not enough. You can have all the data worldwide, but that raises an ethical responsibility and the need to make sense of it.

  Enter customer segmentation software — the answer to delivering personalised customer experiences at scale. 

  This article lists some of the best customer segmentation tools currently in the market. 

  We’ll also go over the benefits of using such tools and how you can choose the best one for your business.

  Let’s get started !

  What is customer segmentation software ?

  Customer segmentation software is a tool that helps businesses analyse customer data and group them based on common characteristics like age, income, and buying habits.

  The main goal of customer segmentation is to gain deeper insights into customer behaviours and preferences. This helps create targeted marketing and product strategies that fit each group and makes it easier to predict how customers will behave in the future.

  

  Benefits of a customer segmentation software

  Understanding your customers is the cornerstone of effective marketing, and customer segmentation software plays a pivotal role in this endeavour. 

  You can deliver more targeted and relevant marketing campaigns by dividing your audience into distinct groups based on shared characteristics. 

  Specifically, here are the main benefits of using customer segmentation tools :

  • Understand your audience better : The software helps businesses group customers with common traits to better understand their preferences and behaviour.
  • Make data-driven decisions : Base your business and marketing decisions on data analytics.
  • Aid product development : Insights from segmentation analytics can guide the creation of products that meet specific customer group needs.
  • Allocate your resources efficiently : Focusing on the customer segments that generate the most revenue leads to more effective and strategic use of your marketing resources.

  Best customer segmentation software in 2024 

  In this section, we go over the top customer segmentation tools in 2024. 

  We’ll look at these tools’ key features and pros and cons.

  1. Matomo

  

  Matomo is a comprehensive web analytics tool that merges traditional web analytics, such as tracking pageviews and visitor bounce rates, with more advanced web analytics features for tracking user behaviour. 

  With robust segmentation features, users can filter website traffic based on criteria such as location and device type, enabling them to analyse specific visitor groups and their behaviour. Users can create custom segments to analyse specific groups of visitors and their behaviour.

  Presenting as the ethical alternative to Google Analytics, Matomo emphasises transparency, 100% accurate data, and compliance with privacy laws.

  Key features

  • Heatmaps and Session Recordings : Matomo provides tools that allow businesses to understand website user interactions visually. This insight is crucial for optimising user experience and increasing conversions.
  • Form Analytics : This feature in Matomo tracks how users interact with website forms, helping businesses understand user behaviour in detail and improve form design and functionality.
  • User Flow Analysis : The tool tracks the journey of a website’s visitors, highlighting the paths taken and where users drop off. This is key for optimising website structure for better user experience and more conversions.
  • A/B Testing : Businesses can use Matomo to test different versions of web pages, determining which is more effective in driving conversions.
  • Conversion Funnels : This feature allows businesses to visualise and optimise the steps customers take toward conversion, identifying areas for improvement.

  Pros 

  • Affordability : With plans starting at $19 per month, Matomo is a cost-effective solution for CRO.
  • Free support : Matomo provides free email support to all Matomo Cloud users.
  • Open-source benefits : Being open-source, Matomo offers enhanced security, privacy, customisation options, and a supportive community.
  • Hosting options : Matomo is available either as a self-hosted solution or cloud-hosted.

  Cons

  • Cost for advanced features : Access to advanced features may incur additional costs for Matomo On-Premise users, although the On-Premise solution itself is free.
  • Technical knowledge required : The self-hosted version of Matomo requires technical knowledge for effective management.

  Try Matomo for Free

  Get the web insights you need, without compromising data accuracy.

  Start for free

  No credit card required

  2. Google Analytics 

  

  Google Analytics 4 (GA4) comprehensively understands website and app performance. It focuses on event-based data collection, allowing businesses to understand user interactions across platforms. 

  Similarly to Matomo, GA4 provides features that allow businesses to segment their audience based on various criteria such as demographics, behaviours, events, and more.

  Key features

  • Event-based tracking : GA4’s shift to an event-based model allows for a flexible and predictive analysis of user behaviour. This includes a detailed view of user interactions on websites and apps.
  • Machine Learning and Smarter Insights : GA4 uses machine learning to automatically detect trends, estimate purchase probabilities and provide marketing insights.
  • Google Ads integration : The integration with Google Ads in GA4 enables tracking customer interactions from first ad engagement, providing a holistic view of the customer experience across various platforms.
  • Customer-centric measurements : GA4 collects data as events, covering a wide range of user interactions and offering a comprehensive view of customer behaviour.
  • Pathing reports : GA4 introduces new pathing reports, allowing detailed user flow analysis through websites and apps.
  • Audiences and filters : GA4 allows the creation of audiences based on specific criteria and the application of filters to segment and refine data analysis.

  Pros 

  • Integration with various platforms, including Google Ads, enhances cross-platform user journey analysis.
  • GA4 has a clean reporting interface, making it easier for marketers to identify key trends and data irregularities.
  • Google Analytics has an active community with an abundance of educational resources available for users.

  Cons

  • Complexity for beginners : The wide range of features and new event-based model might overwhelm users new to analytics tools.
  • Dependence on machine learning : Reliance on machine learning for insights and predictions may require trust in the tool’s data processing and large volumes of traffic for accuracy.
  • Transition from UA to GA4 : Users familiar with Universal Analytics (UA) might find the transition to GA4 challenging due to differences in features and data models.

  3. HubSpot

  

  HubSpot is a marketing and sales software that helps businesses attract visitors and turn them into paying customers. 

  It supports various business processes, from social media posts to email marketing, sales, and customer service. HubSpot organises and tracks user interactions across different channels, providing a unified and efficient approach to customer relationship management (CRM) and customer segmentation.

  Businesses can leverage HubSpot’s customer segmentation through lists, workflows, and smart content.

  Key features

  • Integration capabilities : HubSpot offers over 1,000 integrations in its ecosystem, ensuring seamless connectivity across various marketing, sales, and service tools, which helps maintain data consistency and reduces manual efforts.
  • Segmentation and personalisation : HubSpot allows businesses to deliver personalised content and interactions based on customer behaviour and preferences, using its robust CRM features and advanced automation capabilities.

  Pros 

  • Comprehensive support : HubSpot offers a range of support options, including a knowledge base, real-time chat, and more.
  • User-friendly interface : The platform is designed for ease of use, ensuring a smooth experience even for less tech-savvy users.
  • Personalisation capabilities : HubSpot provides personalised marketing, sales and service experiences, leveraging customer data effectively.

  Cons

  • High price point : HubSpot can be expensive, especially as you scale up and require more advanced features.
  • Steep learning curve : For businesses new to such comprehensive platforms, there might be an initial learning curve to utilise its features effectively.

  4. Klaviyo

  

  Klaviyo is a marketing automation software primarily focused on email and SMS messaging for e-commerce businesses. It’s designed to personalise and optimise customer communication. 

  Klaviyo integrates with e-commerce platforms like Shopify, making it a go-to solution for online stores. Its strength lies in its ability to use customer data to deliver targeted and effective marketing campaigns.

  Key features

  • Email marketing automation : Klaviyo allows users to send automated and personalised emails based on customer behaviour and preferences. This feature is crucial for e-commerce businesses in nurturing leads and maintaining customer engagement.
  • SMS marketing : It includes SMS messaging capabilities, enabling businesses to engage customers directly through text messages.
  • Segmentation and personalisation : Klaviyo offers advanced segmentation tools that enable businesses to categorise customers based on their behaviour, preferences and purchase history, facilitating highly targeted marketing efforts.
  • Integration with e-commerce platforms : Klaviyo integrates with popular e-commerce platforms like Shopify, Magento, and WooCommerce, allowing easy data synchronisation and campaign management.

  Pros 

  • Enhanced e-commerce integration : Klaviyo’s deep integration with e-commerce platforms greatly benefits online retailers regarding ease of use and campaign effectiveness.
  • Advanced segmentation and personalisation : The platform’s strong segmentation capabilities enable businesses to tailor their marketing messages more effectively.
  • Robust automation features : Klaviyo’s automation tools are powerful and user-friendly, saving time and improving marketing efficiency.

  Cons

  • Cost : Klaviyo can be more expensive than other options in this list, particularly as you scale up and add more contacts.
  • Complexity for beginners : The platform’s wide range of features and advanced capabilities might overwhelm beginners or small businesses with simpler needs.

  5. UserGuiding

  

  UserGuiding is a no-code product adoption tool that lets businesses create in-app user walkthroughs, guides, and checklists to onboard, engage, and retain users.

  UserGuiding facilitates customer segmentation by enabling businesses to create segmented onboarding flows, analyse behavioural insights, deliver personalised guidance, and collect feedback tailored to different user segments.

  Key features

  • In-app walkthroughs, guides and checklists : UserGuiding has multiple features that can promote product adoption early in the user journey.
  • In-app messaging : UserGuiding offers in-app messaging to help users learn more about the product and various ways to get value.
  • User feedback : UserGuiding allows businesses to gather qualitative feedback to streamline the adoption journey for users.

  Pros 

  • User-friendly interface
  • Customisable onboarding checklists
  • Retention analytics

  Cons

  • Need for technical expertise to maximise all features
  • Limited customisation options for less tech-savvy users

  What to look for in a customer segmentation software 

  When choosing a customer segmentation software, choosing the right one for your specific business needs is important. 

  Here are a few factors to consider when choosing your customer segmentation tool :

  1. Ease of use : Select a tool with an intuitive interface that simplifies navigation. This enhances the user experience, making complex tasks more manageable. Additionally, responsive customer support is crucial. It ensures that issues are promptly resolved, contributing to a smoother operation.
  2. Scalability and flexibility : Your chosen tool should adjust to your needs. A flexible tool like Matomo can adjust to your growing requirements, offering capabilities that evolve as your business expands.
  3. Integration capabilities : The software should seamlessly integrate with your existing systems, such as CRM, marketing, and automation platforms. 
  4. Advanced analytics and reporting : Assess the software’s capability to analyse and interpret complex data sets, without relying on machine learning to fill data gaps. A robust tool should provide accurate insights and detailed reports, enabling you to make informed decisions based on real data.
  5. Privacy and security considerations : Data security is paramount in today’s digital landscape. Look for features like data encryption, security storage, and adherence to privacy standards like GDPR and CCPA compliance. 
  6. Reviews and recommendations : Before making a decision, consider the reputation of the software providers. Look for reviews and recommendations from other users, especially those in similar industries. This can provide real-world insights into the software’s performance and reliability.

  

  Leverage Matomo’s segmentation capabilities to deliver personalised experiences

  Segmentation is the best place to start if you want to deliver personalised customer experiences. There are several customer segmentation software in the market. But they’re not all the same.

  In this article, we reviewed the top segmentation tools — based on factors like their user base, features, and ethical data privacy considerations.

  Ideally, you want a tool to support your evolving business and segmentation needs. Not to mention one that cares about your customers’ privacy and ensures you stay compliant. 

  Enter Matomo at the top of the list. You can leverage Matomo’s accurate insights and comprehensive segmentation capabilities without compromising on privacy. Try it free for 21-days. No credit card required.

  Try Matomo for Free

  21 day free trial. No credit card required.

  
  

  Your email address
  

  Your website address
  

  Your Analytics subdomain will be .matomo.cloud (change)

  Choose your analytics subdomain
  

  .matomo.cloud

  I accept the terms and conditions and data processing agreement (DPA)

  
  Your information will be used to create an account on our cloud service. For more information please consult our privacy policy.
  
  
  

  Start improving your websites now