Recherche avancée

Sur d’autres sites (13360)

• Unable to stream file onto localhost - ffmpeg

  18 octobre 2013, par trueblue

  I am new to ffmpeg/ffserver. I am trying to stream a local file named Trial onto a localhost using ffserver. I want to run the file in browser as http://localhost:8090/feed1.ffm
  I am executing the below command in Ubuntu(Trial is a Mpeg TS file) :

    ffmpeg -i Trial http://localhost:8090/feed1.ffm

  Upon execution of above command I am getting below error :

  FFmpeg version SVN-r0.5.9-4:0.5.9-0ubuntu0.10.04.3, Copyright (c) 2000-2009 Fabrice Bellard, et al.
  
    configuration: --extra-version=4:0.5.9-0ubuntu0.10.04.3 --prefix=/usr --enable-avfilter --enable-avfilter-lavf --enable-vdpau --enable-bzlib --enable-libgsm --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-pthreads --enable-zlib --disable-stripping --disable-vhook --enable-runtime-cpudetect --enable-gpl --enable-postproc --enable-swscale --enable-x11grab --enable-libdc1394 --enable-shared --disable-static
  
    libavutil     49.15. 0 / 49.15. 0
  
    libavcodec    52.20. 1 / 52.20. 1
  
    libavformat   52.31. 0 / 52.31. 0
  
    libavdevice   52. 1. 0 / 52. 1. 0
  
    libavfilter    0. 4. 0 /  0. 4. 0
  
    libswscale     0. 7. 1 /  0. 7. 1
  
    libpostproc   51. 2. 0 / 51. 2. 0
  
    built on Jan 24 2013 19:42:59, gcc: 4.4.3
  
  
  
  Seems stream 0 codec frame rate differs from container frame rate: 119.88 (120000/1001) -> 59.94 (60000/1001)
  
  Input #0, mpegts, from 'Trial':
  
    Duration: 00:00:04.22, start: 0.177633, bitrate: 40368 kb/s
  
    Program 2 
  
      Stream #0.0[0x21]: Video: mpeg2video, yuv420p, 1280x720 [PAR 1:1 DAR 16:9], 45000 kb/s, 59.94 tbr, 90k tbn, 119.88 tbc
  
  Output #0, ffm, to 'http://localhost:8090/feed1.ffm':
  
      Stream #0.0: Video: flv, yuv420p, 352x288, q=1-5, 100 kb/s, 1000k tbn, 15 tbc
  
      Stream #0.1: Audio: mp2, 44100 Hz, mono, s16, 32 kb/s
  
      Stream #0.2: Video: mpeg1video, yuv420p, 160x128, q=3-31, 64 kb/s, 1000k tbn, 3 tbc
  
      Stream #0.3: Audio: mp2, 22050 Hz, mono, s16, 64 kb/s
  
      Stream #0.4: Video: msmpeg4, yuv420p, 352x240, q=3-31, 256 kb/s, 1000k tbn, 15 tbc
  
  Could not find input stream matching output stream #0.1

  My ffserver.conf file goes like this :

  # Port on which the server is listening. You must select a different
  
  # port from your standard HTTP web server if it is running on the same
  
  # computer.
  
  Port 8090
  
  
  
  # Address on which the server is bound. Only useful if you have
  
  # several network interfaces.
  
  BindAddress 0.0.0.0
  
  
  
  # Number of simultaneous HTTP connections that can be handled. It has
  
  # to be defined *before* the MaxClients parameter, since it defines the
  
  # MaxClients maximum limit.
  
  MaxHTTPConnections 2000
  
  
  
  # Number of simultaneous requests that can be handled. Since FFServer
  
  # is very fast, it is more likely that you will want to leave this high
  
  # and use MaxBandwidth, below.
  
  MaxClients 1000
  
  
  
  # This the maximum amount of kbit/sec that you are prepared to
  
  # consume when streaming to clients.
  
  MaxBandwidth 1000
  
  
  
  # Access log file (uses standard Apache log file format)
  
  # '-' is the standard output.
  
  CustomLog -
  
  
  
  # Suppress that if you want to launch ffserver as a daemon.
  
  NoDaemon
  
  
  
  
  
  ##################################################################
  
  # Definition of the live feeds. Each live feed contains one video
  
  # and/or audio sequence coming from an ffmpeg encoder or another
  
  # ffserver. This sequence may be encoded simultaneously with several
  
  # codecs at several resolutions.
  
  
  
  <feed>
  
  
  
  # You must use &#39;ffmpeg&#39; to send a live feed to ffserver. In this
  
  # example, you can type:
  
  #
  
  # ffmpeg http://localhost:8090/feed1.ffm
  
  
  
  # ffserver can also do time shifting. It means that it can stream any
  
  # previously recorded live stream. The request should contain:
  
  # "http://xxxx?date=[YYYY-MM-DDT][[HH:]MM:]SS[.m...]".You must specify
  
  # a path where the feed is stored on disk. You also specify the
  
  # maximum size of the feed, where zero means unlimited. Default:
  
  # File=/tmp/feed_name.ffm FileMaxSize=5M
  
  File /tmp/feed1.ffm
  
  FileMaxSize 5M
  
  
  
  # You could specify
  
  # ReadOnlyFile /saved/specialvideo.ffm
  
  # This marks the file as readonly and it will not be deleted or updated.
  
  
  
  # Specify launch in order to start ffmpeg automatically.
  
  # First ffmpeg must be defined with an appropriate path if needed,
  
  # after that options can follow, but avoid adding the http:// field
  
  #Launch ffmpeg
  
  
  
  # Only allow connections from localhost to the feed.
  
  ACL allow 127.0.0.1
  
  
  
  </feed>
  
  
  
  
  
  
  
  <stream>
  
  Feed feed1.ffm
  
  Format swf
  
  VideoCodec flv
  
  VideoFrameRate 15
  
  VideoBufferSize 80000
  
  VideoBitRate 100
  
  VideoQMin 1
  
  VideoQMax 5
  
  VideoSize 352x288
  
  PreRoll 0
  
  Noaudio
  
  </stream>
  
  
  
  ##################################################################
  
  # Now you can define each stream which will be generated from the
  
  # original audio and video stream. Each format has a filename (here
  
  # &#39;test1.mpg&#39;). FFServer will send this stream when answering a
  
  # request containing this filename.
  
  
  
  <stream>
  
  
  
  # coming from live feed &#39;feed1&#39;
  
  Feed feed1.ffm
  
  
  
  # Format of the stream : you can choose among:
  
  # mpeg       : MPEG-1 multiplexed video and audio
  
  # mpegvideo  : only MPEG-1 video
  
  # mp2        : MPEG-2 audio (use AudioCodec to select layer 2 and 3 codec)
  
  # ogg        : Ogg format (Vorbis audio codec)
  
  # rm         : RealNetworks-compatible stream. Multiplexed audio and video.
  
  # ra         : RealNetworks-compatible stream. Audio only.
  
  # mpjpeg     : Multipart JPEG (works with Netscape without any plugin)
  
  # jpeg       : Generate a single JPEG image.
  
  # asf        : ASF compatible streaming (Windows Media Player format).
  
  # swf        : Macromedia Flash compatible stream
  
  # avi        : AVI format (MPEG-4 video, MPEG audio sound)
  
  Format mpeg
  
  
  
  # Bitrate for the audio stream. Codecs usually support only a few
  
  # different bitrates.
  
  AudioBitRate 32
  
  
  
  # Number of audio channels: 1 = mono, 2 = stereo
  
  AudioChannels 1
  
  
  
  # Sampling frequency for audio. When using low bitrates, you should
  
  # lower this frequency to 22050 or 11025. The supported frequencies
  
  # depend on the selected audio codec.
  
  AudioSampleRate 44100
  
  
  
  # Bitrate for the video stream
  
  VideoBitRate 64
  
  
  
  
  
  # Ratecontrol buffer size
  
  VideoBufferSize 40
  
  
  
  # Number of frames per second
  
  VideoFrameRate 3
  
  
  
  # Size of the video frame: WxH (default: 160x128)
  
  # The following abbreviations are defined: sqcif, qcif, cif, 4cif, qqvga,
  
  # qvga, vga, svga, xga, uxga, qxga, sxga, qsxga, hsxga, wvga, wxga, wsxga,
  
  # wuxga, woxga, wqsxga, wquxga, whsxga, whuxga, cga, ega, hd480, hd720,
  
  # hd1080
  
  VideoSize 160x128
  
  
  
  # Transmit only intra frames (useful for low bitrates, but kills frame rate).
  
  #VideoIntraOnly
  
  
  
  # If non-intra only, an intra frame is transmitted every VideoGopSize
  
  # frames. Video synchronization can only begin at an intra frame.
  
  VideoGopSize 12
  
  
  
  # More MPEG-4 parameters
  
  # VideoHighQuality
  
  # Video4MotionVector
  
  
  
  # Choose your codecs:
  
  #AudioCodec mp2
  
  #VideoCodec mpeg1video
  
  
  
  # Suppress audio
  
  #NoAudio
  
  
  
  # Suppress video
  
  #NoVideo
  
  
  
  #VideoQMin 3
  
  #VideoQMax 31
  
  
  
  # Set this to the number of seconds backwards in time to start. Note that
  
  # most players will buffer 5-10 seconds of video, and also you need to allow
  
  # for a keyframe to appear in the data stream.
  
  #Preroll 15
  
  
  
  # ACL:
  
  
  
  # You can allow ranges of addresses (or single addresses)
  
  #ACL ALLOW <first address="address"> <last address="address">
  
  
  
  # You can deny ranges of addresses (or single addresses)
  
  #ACL DENY <first address="address"> <last address="address">
  
  
  
  # You can repeat the ACL allow/deny as often as you like. It is on a per
  
  # stream basis. The first match defines the action. If there are no matches,
  
  # then the default is the inverse of the last ACL statement.
  
  #
  
  # Thus &#39;ACL allow localhost&#39; only allows access from localhost.
  
  # &#39;ACL deny 1.0.0.0 1.255.255.255&#39; would deny the whole of network 1 and
  
  # allow everybody else.
  
  
  
  </last></first></last></first></stream>
  
  
  
  
  
  ##################################################################
  
  # Example streams
  
  
  
  
  
  # Multipart JPEG
  
  
  
  #<stream>
  
  #Feed feed1.ffm
  
  #Format mpjpeg
  
  #VideoFrameRate 2
  
  #VideoIntraOnly
  
  #NoAudio
  
  #Strict -1
  
  #</stream>
  
  
  
  
  
  # Single JPEG
  
  
  
  #<stream>
  
  #Feed feed1.ffm
  
  #Format jpeg
  
  #VideoFrameRate 2
  
  #VideoIntraOnly
  
  ##VideoSize 352x240
  
  #NoAudio
  
  #Strict -1
  
  #</stream>
  
  
  
  
  
  
  
  # Flash
  
  
  
  #<stream>
  
  #Feed feed1.ffm
  
  #Format swf
  
  #VideoFrameRate 2
  
  #VideoIntraOnly
  
  #NoAudio
  
  #</stream>
  
  
  
  
  
  # ASF compatible
  
  
  
  <stream>
  
  Feed feed1.ffm
  
  Format asf
  
  VideoFrameRate 15
  
  VideoSize 352x240
  
  VideoBitRate 256
  
  VideoBufferSize 40
  
  VideoGopSize 30
  
  AudioBitRate 64
  
  StartSendOnKey
  
  </stream>
  
  
  
  
  
  # MP3 audio
  
  
  
  #<stream>
  
  #Feed feed1.ffm
  
  #Format mp2
  
  #AudioCodec mp3
  
  #AudioBitRate 64
  
  #AudioChannels 1
  
  #AudioSampleRate 44100
  
  #NoVideo
  
  #</stream>
  
  
  
  
  
  # Ogg Vorbis audio
  
  
  
  #<stream>
  
  #Feed feed1.ffm
  
  #Title "Stream title"
  
  #AudioBitRate 64
  
  #AudioChannels 2
  
  #AudioSampleRate 44100
  
  #NoVideo
  
  #</stream>
  
  
  
  
  
  # Real with audio only at 32 kbits
  
  
  
  #<stream>
  
  #Feed feed1.ffm
  
  #Format rm
  
  #AudioBitRate 32
  
  #NoVideo
  
  #NoAudio
  
  #</stream>
  
  
  
  
  
  # Real with audio and video at 64 kbits
  
  
  
  #<stream>
  
  #Feed feed1.ffm
  
  #Format rm
  
  #AudioBitRate 32
  
  #VideoBitRate 128
  
  #VideoFrameRate 25
  
  #VideoGopSize 25
  
  #NoAudio
  
  #</stream>
  
  
  
  
  
  ##################################################################
  
  # A stream coming from a file: you only need to set the input
  
  # filename and optionally a new format. Supported conversions:
  
  #    AVI -> ASF
  
  
  
  #<stream>
  
  #File "/usr/local/httpd/htdocs/tlive.rm"
  
  #NoAudio
  
  #</stream>
  
  
  
  #<stream>
  
  #File "/usr/local/httpd/htdocs/test.asf"
  
  #NoAudio
  
  #Author "Me"
  
  #Copyright "Super MegaCorp"
  
  #Title "Test stream from disk"
  
  #Comment "Test comment"
  
  #</stream>
  
  
  
  
  
  ##################################################################
  
  # RTSP examples
  
  #
  
  # You can access this stream with the RTSP URL:
  
  #   rtsp://localhost:5454/test1-rtsp.mpg
  
  #
  
  # A non-standard RTSP redirector is also created. Its URL is:
  
  #   http://localhost:8090/test1-rtsp.rtsp
  
  
  
  #<stream>
  
  #Format rtp
  
  #File "/usr/local/httpd/htdocs/test1.mpg"
  
  #</stream>
  
  
  
  
  
  ##################################################################
  
  # SDP/multicast examples
  
  #
  
  # If you want to send your stream in multicast, you must set the
  
  # multicast address with MulticastAddress. The port and the TTL can
  
  # also be set.
  
  #
  
  # An SDP file is automatically generated by ffserver by adding the
  
  # &#39;sdp&#39; extension to the stream name (here
  
  # http://localhost:8090/test1-sdp.sdp). You should usually give this
  
  # file to your player to play the stream.
  
  #
  
  # The &#39;NoLoop&#39; option can be used to avoid looping when the stream is
  
  # terminated.
  
  
  
  #<stream>
  
  #Format rtp
  
  #File "/usr/local/httpd/htdocs/test1.mpg"
  
  #MulticastAddress 224.124.0.1
  
  #MulticastPort 5000
  
  #MulticastTTL 16
  
  #NoLoop
  
  #</stream>
  
  
  
  
  
  ##################################################################
  
  # Special streams
  
  
  
  # Server status
  
  
  
  <stream>
  
  Format status
  
  
  
  # Only allow local people to get the status
  
  ACL allow localhost
  
  ACL allow 192.168.0.0 192.168.255.255
  
  
  
  #FaviconURL http://pond1.gladstonefamily.net:8080/favicon.ico
  
  </stream>
  
  
  
  
  
  # Redirect index.html to the appropriate site
  
  
  
  <redirect>
  
  URL http://www.ffmpeg.org/
  
  </redirect>

  Kindly anyone please assist me whether I am missing something or do i need to change my server.conf file ? I have referred many websites. But still I am unable to fix it. Thanks in advance.

• C++ ffmpeg Specified pixel format is invalid or not supported

  4 septembre 2022, par Turgut

  So I have a program that reads an opengl window and encodes the read data as a video. Now through a series of experimentation I have learned that the bit format of my glfw window is 8:8:8 as returned by glfwGetVideoMode(monitor). So I use this function to read the window :

  


  glReadPixels(0, 0,gl_width, gl_height,GL_RGBA, GL_UNSIGNED_BYTE, (GLvoid*) Buffer);

  


  and I simply encode it in the AV_PIX_FMT_YUV420P format.

  


  Under normal circumstances this method works just fine. However, when I actually run the program, the output I get, as opposed to what I can see in the glfw window, is really low resolution and a bit pixelated.

  


  Here is what my GLFW window looks like :


  


  Now this is what I want it to look like. It looks just fine on the opengl window, and I encode it directly without altering Buffer.

  


  And here is what the encoded result, test.mp4 looks like when I run it using mplayer or similar software :

  


  

  


  It's a lot more blurry and pixelated compare to the GLFW window. With some experimentation and following an answer to another question I asked, I us avcodec_find_best_pix_fmt_of_list((*codec)->pix_fmts, AV_PIX_FMT_RGBA, 1, &ret) and it returned 13. Which led me to believe using AV_PIX_FMT_YUVJ422P is the best option for this convertion to not have a blurry/pixelated result. However, no matter which function I pass, every single format gives off an error except AV_PIX_FMT_YUV420P. The error is :

  


  [mpeg4 @ 0x558e74f47900] Specified pixel format yuvj422p is invalid or not supported


  


  I have no idea why this is happening, as the format is bound to a define and it is changed throughout the entire program when I change the define.

  


  Here is my encoder so far (I have trimmed some parts) :

  


  video_encoder.cpp :

  


  int video_encoder::write_frame(AVFormatContext *fmt_ctx, AVCodecContext *c,
                       AVStream *st, AVFrame *frame, AVPacket *pkt)
    {
    int ret;
    // Conditional jump or move depends on uninitialised value
    // Use of uninitialised value of size 8
    // send the frame to the encoder

    // Error is about c.
    ret = avcodec_send_frame(c, frame);

    if (ret < 0) {
        std::cout << "Error sending a frame to the encoder: " << ret << std::endl;
        exit(1);
    }

    while (ret >= 0) {
        ret = avcodec_receive_packet(c, pkt);

        if (ret == AVERROR(EAGAIN) || ret == AVERROR_EOF)
            break;
        else if (ret < 0) {
            std::cout << "Error encoding a frame: " << ret << std::endl;
            exit(1);
        }

        /* rescale output packet timestamp values from codec to stream timebase */
        av_packet_rescale_ts(pkt, c->time_base, st->time_base);
        pkt->stream_index = st->index;

        /* Write the compressed frame to the media file. */
        //log_packet(fmt_ctx, pkt);

        //std::cout << "Packet: " << pkt << std::endl;

        ret = av_interleaved_write_frame(fmt_ctx, pkt);

        /* pkt is now blank (av_interleaved_write_frame() takes ownership of
         * its contents and resets pkt), so that no unreferencing is necessary.
         * This would be different if one used av_write_frame(). */
        if (ret < 0) {
            std::cout << "Error while writing output packet: " << ret << std::endl;
            exit(1);
        }
    }

    return ret == AVERROR_EOF ? 1 : 0;
}


/* Add an output stream. */
void video_encoder::add_stream(OutputStream *ost, AVFormatContext *oc,
                       const AVCodec **codec,
                       enum AVCodecID codec_id)
{
    AVCodecContext *c;
    int i;

    /* find the encoder */
    *codec = avcodec_find_encoder(codec_id);
    
    if (!(*codec)) {
        fprintf(stderr, "Could not find encoder for '%s'\n",
                avcodec_get_name(codec_id));
        exit(1);
    }

    ost->tmp_pkt = av_packet_alloc();

    if (!ost->tmp_pkt) {
        fprintf(stderr, "Could not allocate AVPacket\n");
        exit(1);
    }

    ost->st = avformat_new_stream(oc, NULL);
    if (!ost->st) {
        fprintf(stderr, "Could not allocate stream\n");
        exit(1);
    }
    ost->st->id = oc->nb_streams-1;
    c = avcodec_alloc_context3(*codec);
    if (!c) {
        fprintf(stderr, "Could not alloc an encoding context\n");
        exit(1);
    }
    ost->enc = c;


    switch ((*codec)->type) {
    case AVMEDIA_TYPE_AUDIO:
        ...
    case AVMEDIA_TYPE_VIDEO:
        c->codec_id = codec_id;

        c->bit_rate = 10000;
        /* Resolution must be a multiple of two. */
        c->width    = width;
        c->height   = height;
        /* timebase: This is the fundamental unit of time (in seconds) in terms
         * of which frame timestamps are represented. For fixed-fps content,
         * timebase should be 1/framerate and timestamp increments should be
         * identical to 1. */
        ost->st->time_base = (AVRational){ 1, STREAM_FRAME_RATE }; // *frame_rate
        c->time_base       = ost->st->time_base;

        c->gop_size      = 7; /* emit one intra frame every twelve frames at most */
        c->pix_fmt       = STREAM_PIX_FMT;
        //if (c->codec_id == AV_CODEC_ID_MPEG2VIDEO) 
        //    c->max_b_frames = 2;
        if (c->codec_id == AV_CODEC_ID_MPEG1VIDEO) {
            /* Needed to avoid using macroblocks in which some coeffs overflow.
             * This does not happen with normal video, it just happens here as
             * the motion of the chroma plane does not match the luma plane. */
            c->mb_decision = 2;
        }

        if ((*codec)->pix_fmts){
            //c->pix_fmt = (*codec)->pix_fmts[0];
            std::cout << "NEW FORMAT : " << c->pix_fmt << std::endl;
        }

        int ret;
        avcodec_find_best_pix_fmt_of_list((*codec)->pix_fmts, AV_PIX_FMT_RGBA, 1, &ret);
        std::cout << "Desired format is: " << ret << std::endl;
        break;
    }
     

    /* Some formats want stream headers to be separate. */
    if (oc->oformat->flags & AVFMT_GLOBALHEADER)
        c->flags |= AV_CODEC_FLAG_GLOBAL_HEADER;
}

/**************************************************************/
/* video output */

AVFrame* video_encoder::alloc_picture(enum AVPixelFormat pix_fmt, int width, int height)
{
    AVFrame *picture;
    int ret;

    picture = av_frame_alloc();
    if (!picture)
        return NULL;

    picture->format = pix_fmt;
    picture->width  = width;
    picture->height = height;

    /* allocate the buffers for the frame data */
    ret = av_frame_get_buffer(picture, 0);
    if (ret < 0) {
        fprintf(stderr, "Could not allocate frame data.\n");
        exit(1);
    }

    return picture;
}

void video_encoder::open_video(AVFormatContext *oc, const AVCodec *codec,
                       OutputStream *ost, AVDictionary *opt_arg)
{
    int ret;
    AVCodecContext *c = ost->enc;
    AVDictionary *opt = NULL;
    av_dict_copy(&opt, opt_arg, 0);
    /* open the codec */
    ret = avcodec_open2(c, codec, &opt);
    av_dict_free(&opt);
    if (ret < 0) {
        fprintf(stderr, "Could not open video codec: %s\n", ret);
        exit(1);
    }

    /* allocate and init a re-usable frame */
    ost->frame = alloc_picture(c->pix_fmt, c->width, c->height);
    if (!ost->frame) {
        fprintf(stderr, "Could not allocate video frame\n");
        exit(1);
    }

    /* If the output format is not YUV420P, then a temporary YUV420P
     * picture is needed too. It is then converted to the required
     * output format. */
    ost->tmp_frame = NULL;


    /* copy the stream parameters to the muxer */
    ret = avcodec_parameters_from_context(ost->st->codecpar, c);
    if (ret < 0) {
        fprintf(stderr, "Could not copy the stream parameters\n");
        exit(1);
    }
}


void video_encoder::set_frame_yuv_from_rgb(AVFrame *frame, struct SwsContext *sws_context) {
    const int in_linesize[1] = { 4 * width };
    //uint8_t* dest[4] = { rgb_data, NULL, NULL, NULL };

    
    sws_context = sws_getContext(
            width, height, AV_PIX_FMT_RGBA,
            width, height, STREAM_PIX_FMT,
            SCALE_FLAGS, 0, 0, 0);

    sws_scale(sws_context, (const uint8_t * const *)&rgb_data, in_linesize, 0,
            height, frame->data, frame->linesize);
}

AVFrame* video_encoder::get_video_frame(OutputStream *ost)
{
    AVCodecContext *c = ost->enc;
    /* check if we want to generate more frames */
    if (av_compare_ts(ost->next_pts, c->time_base,
                      (float) STREAM_DURATION / 1000, (AVRational){ 1, 1 }) > 0)
        return NULL;

    /* when we pass a frame to the encoder, it may keep a reference to it
     * internally; make sure we do not overwrite it here */
    if (av_frame_make_writable(ost->frame) < 0)
        exit(1);

        
    set_frame_yuv_from_rgb(ost->frame, ost->sws_ctx);
    
    
    ost->frame->pts = ost->next_pts++;

    return ost->frame;
}

/*
 * encode one video frame and send it to the muxer
 * return 1 when encoding is finished, 0 otherwise
 */
int video_encoder::write_video_frame(AVFormatContext *oc, OutputStream *ost)
{
    return write_frame(oc, ost->enc, ost->st, get_video_frame(ost), ost->tmp_pkt);
}

void video_encoder::close_stream(AVFormatContext *oc, OutputStream *ost)
{
    avcodec_free_context(&ost->enc);
    av_frame_free(&ost->frame);
    av_frame_free(&ost->tmp_frame);
    av_packet_free(&ost->tmp_pkt);
    //sws_freeContext(ost->sws_ctx);
    //swr_free(&ost->swr_ctx);
}

/**************************************************************/
/* media file output */

void video_encoder::set_encode_framebuffer(uint8_t* data, bool audio_only)
{
    rgb_data = data;
}

video_encoder::~video_encoder()
{
    av_write_trailer(enc_inf.oc);

    /* Close each codec. */
    if (enc_inf.have_video)
        close_stream(enc_inf.oc, &enc_inf.video_st);

    if (!(enc_inf.fmt->flags & AVFMT_NOFILE))
        /* Close the output file. */
        avio_closep(&enc_inf.oc->pb);

    /* free the stream */
    avformat_free_context(enc_inf.oc);
    std::cout << "Done, closing." << std::endl;  
}

bool video_encoder::encode_one_frame()
{
    if (enc_inf.encode_video || enc_inf.encode_audio) {
        /* select the stream to encode */
       if (enc_inf.encode_video &&
            (!enc_inf.encode_audio || av_compare_ts(enc_inf.video_st.next_pts, enc_inf.video_st.enc->time_base,
                                            enc_inf.audio_st.next_pts, enc_inf.audio_st.enc->time_base) <= 0)) {
            enc_inf.encode_video = !write_video_frame(enc_inf.oc, &enc_inf.video_st);
            return true;
        } 
    }
    return false;
}


video_encoder::video_encoder(int w, int h, float fps, unsigned int duration) 
 :width(w), height(h), STREAM_FRAME_RATE(fps), STREAM_DURATION(duration)
{
    //std::filesystem::create_directory("media"); 

    //std::string as_str = "./output/" + std::string(getenv ("OUTPUT_UUID")) + ".mp4";
    std::string as_str = "./output/video.mp4";

    char* filename = const_cast(as_str.c_str());
    enc_inf.video_st, enc_inf.audio_st = (struct OutputStream) { 0 };
    enc_inf.video_st.next_pts = 1; 
    enc_inf.audio_st.next_pts = 1;
    enc_inf.encode_audio, enc_inf.encode_video = 0;
    int ret;
    int i;
    //rgb_data = (uint8_t*)malloc( 48 * sizeof(uint8_t) );

    /* allocate the output media context */
    avformat_alloc_output_context2(&enc_inf.oc, NULL, NULL, filename);

    if (!enc_inf.oc) {
        //VI_ERROR("Could not deduce output format from file extension: using MPEG.\n");
        avformat_alloc_output_context2(&enc_inf.oc, NULL, "mpeg", filename);
    }
    if (!enc_inf.oc)
        std::cout << "FAILED" << std::endl;
        //return 1;

    enc_inf.fmt = enc_inf.oc->oformat;

    /* Add the audio and video streams using the default format codecs
     * and initialize the codecs. */
    if (enc_inf.fmt->video_codec != AV_CODEC_ID_NONE) {
        add_stream(&enc_inf.video_st, enc_inf.oc, &video_codec, enc_inf.fmt->video_codec);
        enc_inf.have_video = 1;
        enc_inf.encode_video = 1;
    }

    /* Now that all the parameters are set, we can open the audio and
     * video codecs and allocate the necessary encode buffers. */
    if (enc_inf.have_video)
        open_video(enc_inf.oc, video_codec, &enc_inf.video_st, opt);

    /* open the output file, if needed */
    if (!(enc_inf.fmt->flags & AVFMT_NOFILE)) {
        ret = avio_open(&enc_inf.oc->pb, filename, AVIO_FLAG_WRITE);
        if (ret < 0) {
            //VI_ERROR("Could not open '%s': %s\n", filename, ret);
            //return 1;
        }
    }

    /* Write the stream header, if any. */
    ret = avformat_write_header(enc_inf.oc, &opt);
    if (ret < 0) {
        VI_ERROR("Error occurred when opening output file:");
        //return 1;
    }
    
    //return 0;
}


  


  video_encoder.h :

  


  #define STREAM_PIX_FMT AV_PIX_FMT_YUV420P /* default pix_fmt */

#define SCALE_FLAGS SWS_SPLINE

/* The output bit rate in bit/s */
#define OUTPUT_BIT_RATE 96000
/* The number of output channels */
#define OUTPUT_CHANNELS 2

typedef struct OutputStream {
    AVStream *st;
    AVCodecContext *enc;

    /* pts of the next frame that will be generated */
    int64_t next_pts;
    int samples_count;

    AVFrame *frame;
    AVFrame *tmp_frame;

    AVPacket *tmp_pkt;

    float t, tincr, tincr2;

    struct SwsContext *sws_ctx;
    struct SwrContext *swr_ctx;
} OutputStream;
        typedef struct {
            OutputStream video_st, audio_st;
            const AVOutputFormat *fmt;
            AVFormatContext *oc;
            int have_video, have_audio, encode_video, encode_audio;
            std::string name;
        } encode_info;


  


  Again, changing STREAM_PIX_FMT anything other than AV_PIX_FMT_YUV420P causes the program to give the error.

  


  What is the cause of this and how can I fix this ? Also am I on the right track for fixing the pixelation problem ? I'm using ubuntu.

  


• Subtitles come too early in ts file [closed]

  6 octobre 2023, par kallelo

  I have recorded a movie with my SAT-recorder on harddisk. The movie is in french and has subtitles in several languages. I cutted the ts-file and removed all subtitles except german wit tsdoctor. Sometimes later I noticed that the subtitles come about four seconds too early. Unfortunately I had deleted the original file until then.

  


  ffprobe shows the following output :

  


  ffprobe version 6.0-essentials_build-www.gyan.dev Copyright (c) 2007-2023 the FFmpeg developers
  built with gcc 12.2.0 (Rev10, Built by MSYS2 project)
...
Input #0, mpegts, from 'inputfile.ts':
  Duration: 01:35:06.88, start: 54851.766678, bitrate: 3407 kb/s
  Program 6915
  Stream #0:0[0x267]: Video: mpeg2video (Main) ([2][0][0][0] / 0x0002), yuv420p(tv, top first), 720x576 [SAR 64:45 DAR 16:9], 25 fps, 25 tbr, 90k tbn
    Side data:
      cpb: bitrate max/min/avg: 15000000/0/0 buffer size: 1835008 vbv_delay: N/A
  Stream #0:1[0x27b](fra): Audio: mp2 ([3][0][0][0] / 0x0003), 48000 Hz, stereo, fltp, 192 kb/s
  Stream #0:2[0x3a9](deu): Subtitle: dvb_subtitle ([6][0][0][0] / 0x0006)


  


  I can imagine that this problem could be solved with ffmpeg, but don't know how and I didn't found anything that would help me.