Recherche avancée

Sur d’autres sites (3199)

• Convert and stream videos [on hold]

  26 septembre 2013, par user969068

  I am going to develop a php script on linux based server which will be used to upload videos on server and stream to users. I have seen many open source free/paid libraries available with flash,html5 etc players. After research I have decided to go with ffmpeg to convert videos and use jwPlayer with RTMP protocol to stream videos.

  I am not much familiar with streaming concept but I have researched a lot on this subject since few days, so last I thought to ask here if I am going the correct way to achieve my goals, which are listed below :

  1. My main concern is to start streaming videos as soon page is loaded.
  2. Convert videos after upload ( Found ffmpeg for this purpose is well suited )
  3. Seeking video should be faster (which after searching I found is good with RTMP protocol)

  Please can someone guide me if I am going in the right direction by choosing ffmpeg, jwplayer with RTMP protocol. Thanks a lot for any guidance.

• avcodec/nvdec_av1 : fix setting film grain parameters for frames with update_grain...

  12 novembre 2020, par James Almer

  avcodec/nvdec_av1 : fix setting film grain parameters for frames with update_grain == 0
  The spec in section 6.8.20 states the parameters should be loaded from a
  
  reference frame indexed by film_grain_params_ref_idx.
  Signed-off-by : James Almer <jamrial@gmail.com>
  

  • [DH] libavcodec/nvdec_av1.c

• ffmpeg, /dev/video0, -f decklink

  20 mars 2019, par Camille Goudeseune

  I’m trying to capture video from a PCI card, the Blackmagic DeckLink Mini Recorder, via ffmpeg, on a headless host running Ubuntu 18.04.2 LTS, hopefully with a command like

  ffmpeg -f decklink -i /dev/video0 ...

  How can I make that work ? I have two obstacles.

  No /dev/video0

  ffmpeg -i /dev/video0 ... fails : /dev/video0: No such device or address.
  v4l2-ctl --list-devices fails with the same error message.

  I built /dev/video0, and it looks okay :

  mknod /dev/video0 c 81 0
  
  chown root.video /dev/video0
  
  chmod g+rw /dev/video0

  To compare this file with a working one, I ran strace cat /dev/video0 on this host, and on another host (Ubuntu 14) with a working /dev/video0. The outputs began to differ here (good, then bad) :

  fstat(1, {st_mode=S_IFREG|0644, st_size=0, ...}) = 0
  
  open("/dev/video0", O_RDONLY)           = 3  
  
  fstat(3, {st_mode=S_IFCHR|0660, st_rdev=makedev(81, 0), ...}) = 0
  
  fadvise64(3, 0, 0, POSIX_FADV_SEQUENTIAL) = 0
  
  ----
  
  
  
  fstat(1, {st_mode=S_IFCHR|0620, st_rdev=makedev(136, 0), ...}) = 0
  
  openat(AT_FDCWD, "/dev/video0", O_RDONLY) = -1 ENXIO (No such device or address)

  So /dev/video0 is broken at a level lower than ffmpeg or v4l2 or even cat.

  On Ubuntu 14, man 8 MAKEDEV suggests that the error message means that "the kernel does not have the driver configured or loaded."

  This Ubuntu 18 host lacks that manpage, but it does have a few /snap/core/*/sbin/MAKEDEV, all the same, so I tried

  /snap/core/6350/sbin/MAKEDEV -n -v video

  It would have created over a hundred devices videoXX, radioXX, vtxXX, vbiXX. Those devices didn’t exist yet, so it seemed harmless to try it.

  rm /dev/video0; /snap/core/6350/sbin/MAKEDEV video

  That rebuilt /dev/video0, but "No such device" remains, from cat or ffmpeg.

  No decklink

  ffmpeg -f decklink ... fails with Unknown input format: 'decklink'.

  Neither black nor deck nor link is mentioned by ffmpeg -devices (fbdev, lavfi, oss, v4l2) and ffmpeg -formats (about 350), either for Ubuntu’s own version 3.4.4-0ubuntu0.18.04.1, or for version N-93330-g7ff89574c7 compiled from source on 2019 Mar 13 :

  git clone https://git.ffmpeg.org/ffmpeg.git ffmpeg
  
  cd ffmpeg
  
  ./configure --enable-nonfree --disable-doc --disable-w32threads --enable-pthreads

  (Although ./configure --help mentions --enable-decklink, using that yielded "ERROR : DeckLinkAPI.h not found." updatedb && locate DeckLinkAPI.h finds no file with that name, either.)

  The DeckLink PCI card is recognized by hwinfo and lspci.

  lsmod reports the loaded modules blackmagic and blackmagic_io.

  Maybe the PCI card is installed ok, but ffmpeg just can’t reach it because I can’t configure it for that.

  Edit : Rebooting didn’t fix anything.