Recherche avancée

Sur d’autres sites (16862)

• How to batch process a series of video files with powershell and other-transcode/ffmpeg

  7 juin 2022, par DarkDiamond

  TL ;DR

  


  What did I do wrong in the following PowerShell-Script ? It does not work as expected.

  


  ---

  


  I am recording some of my lectures in my university with a photo camera. This works pretty well although I have to split the single lecture into three to four parts because the camera can only record 29 minutes of video in one take. I know that this is a common issue related to some licensensing problem that most photo cameras simply don't have the right license to record longer videos. But it confronts me with the problem that I later have to edit the files together after I did some post processing on them.

  


  With the camera I produce up to four video files with sizes around 3.5 GB which is way to big in order to be of any use because our IT department understandably doesn't want to host so much data, as I produce around 22 GB of video material each week.

  


  Some time ago I came across a very useful tool called "other-video-transcoding" by Don Melton over on GitHub, written in ruby, that allows me to compress the files to a reasonable file size without any visual loss. In addition I crop the videos to remove the part of each frame that is neither the board nor a place where my professor stands in order to decrease the filesize even further and do some privacy protection by cutting out most of the students.

  


  As the tools are accessable via the command line, it is relatively easy to configure and does not cost additional computational power to render a nice gui, so I can edit one of the 29 minute clips in less than 10 minutes.

  


  Now I wanted to optimize my workflow by writing a PowerShell script that only takes the parameters what to crop and which files to work on and then does the rest on its own so I can just start the script and then do something else while my laptop renders the new files.

  


  So far I have the following :

  


  $video_path = Get-ChildItem ..\ -Directory | findstr "SoSe"

Get-ChildItem $video_path -name | findstr ".MP4" | Out-File temp.txt -Append 
Get-Content temp.txt | ForEach-Object {"file " + $_} >> .\files.txt

Get-ChildItem $video_path |
Foreach-Object {
other-transcode --hevc --mp4 --target 3000 --crop 1920:780:0:0 $_.FullName
}

#other-transcode --hevc --mp4 --crop 1920:720:60:0 ..\SoSe22_Theo1_videos_v14_RAW\
ffmpeg -f concat -i files.txt -c copy merged.mp4
Remove-Item .\temp.txt


  


  but it does not quite do what I it expect to do.
This is my file system :

  


  sciebo/
└── SoSe22_Theo1_videos/
    ├── SoSe22_Theo1_videos_v16/
    │   ├── SoSe22_Theo1_videos_v16_KOMPR/
    │   │   ├── C0001.mp4
    │   │   ├── C0002.mp4
    │   │   ├── C0003.mp4
    │   │   ├── C0004.mp4
    │   │   ├── temp.txt
    │   │   ├── files.txt
    │   │   └── merged.mp4
    │   └── SoSe22_Theo1_videos_v16_RAW/
    │       ├── C0001.mp4
    │       ├── C0002.mp4
    │       ├── C0003.mp4
    │       └── C0004.mp4
    └── SoSe22_Theo1_videos_v17/
        ├── SoSe22_Theo1_videos_v17_KOMPR
        └── SoSe22_Theo1_videos_v17_RAW/
            ├── C0006.mp4
            ├── C0007.mp4
            ├── C0008.mp4
            └── C0009.mp4


  


  where the 16th lecture is already processed and the 17th is not. I always have the raw video data in the folders ending on RAW and the edited/compressed output files in the one ending on KOMPR. Note that the video files in the KOMPR folder are the output files of the other-transcode tool.

  


  The real work happens in the line where it says

  


  other-transcode --hevc --mp4 --target 3000 --crop 1920:780:0:0 $_.FullName


  


  and in the line

  


  ffmpeg -f concat -i files.txt -c copy merged.mp4


  


  where I concat the output files into the final version I can upload to our online learning platform.
What is wrong with my script ? In the end I'd like to pass the --crop parameter just to my script, but that is not the primary problem.

  


  ---

  


  A little information on the transcoding script so you don't have to look into the documentation :
  
As the last argument the tool takes the location of the video files to work on, be it relative or absolute file paths. The output is placed in the folder the script is called in, so if I cd into one of the KOMPR directories and then call

  


  other-transcode --mp4 ../SoSe22_Theo1_videos_v16_RAW/C0001.mp4


  


  a new file C0001.mp4 is created in the KOMPR directory and the transcoded video and old audio are written to that new video file.

  


• Need help configuring FFMPEG to work with a webcams h264 stream

  9 août 2020, par The Welsh Dragon

  I have been trying to get a H264 stream from a H264 usb webcam working but I am not making much progress so I'm hoping someone knows FFMPEG better than me !

  


  There are dozens of questions/answers on SO but none solve my problem.

  


  In short, I get a very pixelated (or sometimes mostly green) screen. I am using VLC to test the stream which is coming via an RTSP server. I am using FFMPEG to copy the webcam stream to the local RTSP server.

  


  The webcam also supports YUYV which I can get working - it is just the h264 stream causing me problems.

  


  So this is how the device is presented :

  


  H264 USB Camera: USB Camera (usb-20980000.usb-1):
        /dev/video0
        /dev/video1
        /dev/video2
        /dev/video3


  


  /dev/video0 is the YUYV and MPEG stream
/dev/video2 is the h264 stream that has the following capabilities :

  


  ioctl: VIDIOC_ENUM_FMT
        Type: Video Capture

        [0]: 'H264' (H.264, compressed)
                Size: Discrete 1920x1080
                        Interval: Discrete 0.033s (30.000 fps)
                        Interval: Discrete 0.040s (25.000 fps)
                        Interval: Discrete 0.067s (15.000 fps)
                        Interval: Discrete 0.033s (30.000 fps)
                        Interval: Discrete 0.040s (25.000 fps)
                        Interval: Discrete 0.067s (15.000 fps)
                Size: Discrete 1280x720
                        Interval: Discrete 0.033s (30.000 fps)
                        Interval: Discrete 0.040s (25.000 fps)
                        Interval: Discrete 0.067s (15.000 fps)
                Size: Discrete 800x600
                        Interval: Discrete 0.033s (30.000 fps)
                        Interval: Discrete 0.040s (25.000 fps)
                        Interval: Discrete 0.067s (15.000 fps)
                Size: Discrete 640x480
                        Interval: Discrete 0.033s (30.000 fps)
                        Interval: Discrete 0.040s (25.000 fps)
                        Interval: Discrete 0.067s (15.000 fps)
                Size: Discrete 640x360
                        Interval: Discrete 0.033s (30.000 fps)
                        Interval: Discrete 0.040s (25.000 fps)
                        Interval: Discrete 0.067s (15.000 fps)
                Size: Discrete 352x288
                        Interval: Discrete 0.033s (30.000 fps)
                        Interval: Discrete 0.040s (25.000 fps)
                        Interval: Discrete 0.067s (15.000 fps)
                Size: Discrete 320x240
                        Interval: Discrete 0.033s (30.000 fps)
                        Interval: Discrete 0.040s (25.000 fps)
                        Interval: Discrete 0.067s (15.000 fps)
                Size: Discrete 1920x1080
                        Interval: Discrete 0.033s (30.000 fps)
                        Interval: Discrete 0.040s (25.000 fps)
                        Interval: Discrete 0.067s (15.000 fps)
                        Interval: Discrete 0.033s (30.000 fps)
                        Interval: Discrete 0.040s (25.000 fps)
                        Interval: Discrete 0.067s (15.000 fps)


  


  I have tried various resolutions, the smaller giving slightly less pixelated images but none are usable and definitely dont compare to the YUYV high resolution results.

  


  This (YUYV) command works :

  


  ffmpeg -input_format yuyv422 -f video4linux2 -s 1280x720 -r 10 -i /dev/video0 -c:v h264_omx -r 10 -b:v 2M -an -f rtsp rtsp://localhost:80/live/stream


  


  These two h264 options dont work :

  


  ffmpeg -input_format h264 -f video4linux2 -video_size 1920x1080 -framerate 30 -i /dev/video0 -c:v copy -an -f rtsp rtsp://localhost:80/live/stream


  


  ffmpeg -re -i /dev/video2 -video_size 800x600 -framerate 15 -pix_fmt yuv420p -tune zerolatency -c:v copy -an -f rtsp rtsp://localhost:80/live/stream


  


  For that last command the FFMPEG output looks like this :

  


  ffmpeg version git-2020-08-07-6fdf3cc Copyright (c) 2000-2020 the FFmpeg developers
  built with gcc 8 (Raspbian 8.3.0-6+rpi1)
  configuration: --extra-ldflags=-latomic --arch=armel --target-os=linux --enable-gpl --enable-omx --enable-omx-rpi --enable-nonfree --enable-libfreetype --enable-libx264 --enable-libmp3lame --enable-mmal --enable-indev=alsa --enable-outdev=alsa
  libavutil      56. 58.100 / 56. 58.100
  libavcodec     58.100.100 / 58.100.100
  libavformat    58. 50.100 / 58. 50.100
  libavdevice    58. 11.101 / 58. 11.101
  libavfilter     7. 87.100 /  7. 87.100
  libswscale      5.  8.100 /  5.  8.100
  libswresample   3.  8.100 /  3.  8.100
  libpostproc    55.  8.100 / 55.  8.100
Input #0, video4linux2,v4l2, from '/dev/video2':
  Duration: N/A, start: 1353.265049, bitrate: N/A
    Stream #0:0: Video: h264 (Main), yuv420p(progressive), 1920x1080, 30 fps, 30 tbr, 1000k tbn, 2000k tbc
[udp @ 0x38c29f0] attempted to set receive buffer to size 393216 but it only ended up set as 360448
[udp @ 0x38d7b50] attempted to set receive buffer to size 393216 but it only ended up set as 360448
Output #0, rtsp, to 'rtsp://localhost:80/live/stream':
  Metadata:
    encoder         : Lavf58.50.100
    Stream #0:0: Video: h264 (Main), yuv420p(progressive), 1920x1080, q=2-31, 30 fps, 30 tbr, 90k tbn, 1000k tbc
Stream mapping:
  Stream #0:0 -> #0:0 (copy)
Press [q] to stop, [?] for help
[rtsp @ 0x38fd890] Timestamps are unset in a packet for stream 0. This is deprecated and will stop working in the future. Fix your code to set the timestamps properly
[rtsp @ 0x38fd890] Non-monotonous DTS in output stream 0:0; previous: 0, current: 0; changing to 1. This may result in incorrect timestamps in the output file.
frame=  348 fps= 18 q=-1.0 size=N/A time=00:00:21.03 bitrate=N/A speed=1.09x


  


  The issue looks like it is bandwidth related or the lack of processing power in the device being used BUT the YUYV works at a high resolution and (taking a completely different approach i.e. not using FFMPEG) I can get a very decent MPEG stream working on the same device.

  


  So any FFMPEG experts out there who can help me with getting the correct parameters for a h264 stream ?

  


• ARM inline asm secrets

  6 juillet 2010, par Mans — ARM, Compilers

  Although I generally recommend against using GCC inline assembly, preferring instead pure assembly code in separate files, there are occasions where inline is the appropriate solution. Should one, at a time like this, turn to the GCC documentation for guidance, one must be prepared for a degree of disappointment. As it happens, much of the inline asm syntax is left entirely undocumented. This article attempts to fill in some of the blanks for the ARM target.
  

  Constraints

  Each operand of an inline asm block is described by a constraint string encoding the valid representations of the operand in the generated assembly. For example the “r” code denotes a general-purpose register. In addition to the standard constraints, ARM allows a number of special codes, only some of which are documented. The full list, including a brief description, is available in the constraints.md file in the GCC source tree. The following table is an extract from this file consisting of the codes which are meaningful in an inline asm block (a few are only useful in the machine description itself).

  f	Legacy FPA registers f0-f7.
  t	The VFP registers s0-s31.
  v	The Cirrus Maverick co-processor registers.
  w	The VFP registers d0-d15, or d0-d31 for VFPv3.
  x	The VFP registers d0-d7.
  y	The Intel iWMMX co-processor registers.
  z	The Intel iWMMX GR registers.
  l	In Thumb state the core registers r0-r7.
  h	In Thumb state the core registers r8-r15.
  j	A constant suitable for a MOVW instruction. (ARM/Thumb-2)
  b	Thumb only. The union of the low registers and the stack register.
  I	In ARM/Thumb-2 state a constant that can be used as an immediate value in a Data Processing instruction. In Thumb-1 state a constant in the range 0 to 255.
  J	In ARM/Thumb-2 state a constant in the range -4095 to 4095. In Thumb-1 state a constant in the range -255 to -1.
  K	In ARM/Thumb-2 state a constant that satisfies the I constraint if inverted. In Thumb-1 state a constant that satisfies the I constraint multiplied by any power of 2.
  L	In ARM/Thumb-2 state a constant that satisfies the I constraint if negated. In Thumb-1 state a constant in the range -7 to 7.
  M	In Thumb-1 state a constant that is a multiple of 4 in the range 0 to 1020.
  N	Thumb-1 state a constant in the range 0 to 31.
  O	In Thumb-1 state a constant that is a multiple of 4 in the range -508 to 508.
  Pa	In Thumb-1 state a constant in the range -510 to +510
  Pb	In Thumb-1 state a constant in the range -262 to +262
  Ps	In Thumb-2 state a constant in the range -255 to +255
  Pt	In Thumb-2 state a constant in the range -7 to +7
  G	In ARM/Thumb-2 state a valid FPA immediate constant.
  H	In ARM/Thumb-2 state a valid FPA immediate constant when negated.
  Da	In ARM/Thumb-2 state a const_int, const_double or const_vector that can be generated with two Data Processing insns.
  Db	In ARM/Thumb-2 state a const_int, const_double or const_vector that can be generated with three Data Processing insns.
  Dc	In ARM/Thumb-2 state a const_int, const_double or const_vector that can be generated with four Data Processing insns. This pattern is disabled if optimizing for space or when we have load-delay slots to fill.
  Dn	In ARM/Thumb-2 state a const_vector which can be loaded with a Neon vmov immediate instruction.
  Dl	In ARM/Thumb-2 state a const_vector which can be used with a Neon vorr or vbic instruction.
  DL	In ARM/Thumb-2 state a const_vector which can be used with a Neon vorn or vand instruction.
  Dv	In ARM/Thumb-2 state a const_double which can be used with a VFP fconsts instruction.
  Dy	In ARM/Thumb-2 state a const_double which can be used with a VFP fconstd instruction.
  Ut	In ARM/Thumb-2 state an address valid for loading/storing opaque structure types wider than TImode.
  Uv	In ARM/Thumb-2 state a valid VFP load/store address.
  Uy	In ARM/Thumb-2 state a valid iWMMX load/store address.
  Un	In ARM/Thumb-2 state a valid address for Neon doubleword vector load/store instructions.
  Um	In ARM/Thumb-2 state a valid address for Neon element and structure load/store instructions.
  Us	In ARM/Thumb-2 state a valid address for non-offset loads/stores of quad-word values in four ARM registers.
  Uq	In ARM state an address valid in ldrsb instructions.
  Q	In ARM/Thumb-2 state an address that is a single base register.

  Operand codes

  Within the text of an inline asm block, operands are referenced as %0, %1 etc. Register operands are printed as rN, memory operands as [rN, #offset], and so forth. In some situations, for example with operands occupying multiple registers, more detailed control of the output may be required, and once again, an undocumented feature comes to our rescue.

  Special code letters inserted between the % and the operand number alter the output from the default for each type of operand. The table below lists the more useful ones.

  c	An integer or symbol address without a preceding # sign
  B	Bitwise inverse of integer or symbol without a preceding #
  L	The low 16 bits of an immediate constant
  m	The base register of a memory operand
  M	A register range suitable for LDM/STM
  H	The highest-numbered register of a pair
  Q	The least significant register of a pair
  R	The most significant register of a pair
  P	A double-precision VFP register
  p	The high single-precision register of a VFP double-precision register
  q	A NEON quad register
  e	The low doubleword register of a NEON quad register
  f	The high doubleword register of a NEON quad register
  h	A range of VFP/NEON registers suitable for VLD1/VST1
  A	A memory operand for a VLD1/VST1 instruction
  y	S register as indexed D register, e.g. s5 becomes d2[1]