Recherche avancée

Sur d’autres sites (13333)

• FFMPEG : RTSP re-stream dies randomly

  14 mai 2018, par stevendesu

  I have a security camera streaming RTSP, and I wish to re-stream this to an RTMP ingest server. For now I’m using my laptop as an ffmpeg proxy, but eventually I’ll use a raspberry pi or something similar (cheap/small)

  Here’s the command I’m using (pretty simple) :

  ffmpeg -i rtsp://@10.0.0.16:554/1/h264major -c:v libx264 -c:a none -f flv rtmp://output/camera_stream

  This works but after a minute or two the stream dies. Here’s the output :

  ffmpeg version N-90057-g7c82e0f Copyright (c) 2000-2018 the FFmpeg developers
  
    built with gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.6) 20160609
  
    configuration: --prefix=/home/sbarnett/ffmpeg_build --pkg-config-flags=--static --extra-cflags=-I/home/sbarnett/ffmpeg_build/include --extra-ldflags=-L/home/sbarnett/ffmpeg_build/lib --extra-libs='-lpthread -lm' --bindir=/home/sbarnett/bin --enable-gpl --enable-libass --enable-libfdk-aac --enable-libfreetype --enable-libmp3lame --enable-libopus --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libx265 --enable-libspeex --enable-nonfree
  
    libavutil      56.  7.101 / 56.  7.101
  
    libavcodec     58. 11.101 / 58. 11.101
  
    libavformat    58.  9.100 / 58.  9.100
  
    libavdevice    58.  1.100 / 58.  1.100
  
    libavfilter     7. 12.100 /  7. 12.100
  
    libswscale      5.  0.101 /  5.  0.101
  
    libswresample   3.  0.101 /  3.  0.101
  
    libpostproc    55.  0.100 / 55.  0.100
  
  Input #0, rtsp, from 'rtsp://@10.0.0.16:554/1/h264major':
  
    Metadata:
  
      title           : h264major
  
      comment         : h264major
  
    Duration: N/A, start: 0.360000, bitrate: N/A
  
      Stream #0:0: Video: h264 (Main), yuvj420p(pc, bt709, progressive), 720x480, 25 fps, 25 tbr, 90k tbn, 50 tbc
  
  Stream mapping:
  
    Stream #0:0 -> #0:0 (h264 (native) -> h264 (libx264))
  
  Press [q] to stop, [?] for help
  
  [libx264 @ 0x38843c0] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 BMI2 AVX2
  
  [libx264 @ 0x38843c0] profile High, level 3.0
  
  [libx264 @ 0x38843c0] 264 - core 155 - H.264/MPEG-4 AVC codec - Copyleft 2003-2018 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=6 lookahead_threads=1 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
  
  Output #0, flv, to 'rtmp://output/camera_stream':
  
    Metadata:
  
      title           : h264major
  
      comment         : h264major
  
      encoder         : Lavf58.9.100
  
      Stream #0:0: Video: h264 (libx264) ([7][0][0][0] / 0x0007), yuvj420p(pc), 720x480, q=-1--1, 25 fps, 1k tbn, 25 tbc
  
      Metadata:
  
        encoder         : Lavc58.11.101 libx264
  
      Side data:
  
        cpb: bitrate max/min/avg: 0/0/0 buffer size: 0 vbv_delay: -1
  
  Past duration 0.999992 too large
  
      Last message repeated 29 times
  
  [rtsp @ 0x3847600] max delay reached. need to consume packet
  
  [rtsp @ 0x3847600] RTP: missed 48 packets
  
  Past duration 0.999992 too large
  
      Last message repeated 4 times
  
  frame=   44 fps=0.0 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A dup=0 drop=5 speed=   0x    
  
  frame=   57 fps= 54 q=28.0 size=      43kB time=00:00:00.16 bitrate=2186.4kbits/s dup=0 drop=5 speed=0.153x    
  
  ... (lots of similar messages) ...   
  
  frame= 1163 fps= 26 q=28.0 size=    1341kB time=00:00:44.84 bitrate= 245.0kbits/s dup=0 drop=5 speed=0.99x    
  
  frame= 1177 fps= 26 q=28.0 size=    1353kB time=00:00:45.40 bitrate= 244.2kbits/s dup=0 drop=5 speed=0.99x    
  
  [rtsp @ 0x3847600] max delay reached. need to consume packet
  
  [rtsp @ 0x3847600] RTP: missed 2 packets
  
  frame= 1190 fps= 26 q=28.0 size=    1370kB time=00:00:45.92 bitrate= 244.4kbits/s dup=0 drop=5 speed=0.99x    
  
  [h264 @ 0x38c08c0] Increasing reorder buffer to 1
  
  frame= 1201 fps= 26 q=28.0 size=    1381kB time=00:00:46.36 bitrate= 244.0kbits/s dup=0 drop=5 speed=0.989x    
  
  frame= 1214 fps= 26 q=28.0 size=    1393kB time=00:00:46.88 bitrate= 243.4kbits/s dup=0 drop=5 speed=0.989x    
  
  ... (lots of similar messages) ...    
  
  frame= 1761 fps= 25 q=28.0 size=    2030kB time=00:01:08.80 bitrate= 241.7kbits/s dup=0 drop=5 speed=0.993x    
  
  frame= 1774 fps= 25 q=28.0 size=    2041kB time=00:01:09.32 bitrate= 241.2kbits/s dup=0 drop=5 speed=0.993x    
  
  [flv @ 0x3884900] Failed to update header with correct duration.
  
  [flv @ 0x3884900] Failed to update header with correct filesize.
  
  frame= 1782 fps= 25 q=-1.0 Lsize=    2127kB time=00:01:11.64 bitrate= 243.2kbits/s dup=0 drop=5 speed=1.02x    
  
  video:2092kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 1.679417%
  
  [libx264 @ 0x38843c0] frame I:8     Avg QP:16.89  size: 42446
  
  [libx264 @ 0x38843c0] frame P:1672  Avg QP:19.54  size:  1065
  
  [libx264 @ 0x38843c0] frame B:102   Avg QP:23.00  size:   205
  
  [libx264 @ 0x38843c0] consecutive B-frames: 92.4%  0.0%  0.0%  7.6%
  
  [libx264 @ 0x38843c0] mb I  I16..4: 12.9% 36.2% 50.9%
  
  [libx264 @ 0x38843c0] mb P  I16..4:  0.2%  0.2%  0.0%  P16..4: 16.7%  0.7%  1.0%  0.0%  0.0%    skip:81.1%
  
  [libx264 @ 0x38843c0] mb B  I16..4:  0.1%  0.1%  0.0%  B16..8: 11.7%  0.1%  0.0%  direct: 1.5%  skip:86.5%  L0:62.2% L1:35.3% BI: 2.5%
  
  [libx264 @ 0x38843c0] 8x8 transform intra:40.8% inter:47.4%
  
  [libx264 @ 0x38843c0] coded y,uvDC,uvAC intra: 46.5% 53.0% 17.2% inter: 3.9% 8.7% 0.0%
  
  [libx264 @ 0x38843c0] i16 v,h,dc,p: 21% 56%  8% 15%
  
  [libx264 @ 0x38843c0] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 23% 33% 31%  1%  2%  3%  2%  2%  3%
  
  [libx264 @ 0x38843c0] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 25% 39%  9%  3%  3%  4%  5%  3%  8%
  
  [libx264 @ 0x38843c0] i8c dc,h,v,p: 43% 33% 21%  3%
  
  [libx264 @ 0x38843c0] Weighted P-Frames: Y:0.0% UV:0.0%
  
  [libx264 @ 0x38843c0] ref P L0: 88.0%  1.4%  6.6%  4.0%
  
  [libx264 @ 0x38843c0] ref B L0: 99.4%  0.5%  0.1%
  
  [libx264 @ 0x38843c0] ref B L1: 99.4%  0.6%
  
  [libx264 @ 0x38843c0] kb/s:238.73

  The camera is pretty cheap (from China) so it’s likely I’m getting bad data from it or it’s cutting out for a few seconds at a time. Ideally I would need ffmpeg to handle this well (ignore bad data, wait as long as necessary for good data to resume encoding)

  Using ffplay to check out the RTSP stream, I get output like the following :

  $> ffplay -i rtsp://@10.0.0.16:554/1/h264major
  
  ffplay version N-90057-g7c82e0f Copyright (c) 2003-2018 the FFmpeg developers
  
    built with gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.6) 20160609
  
    configuration: --prefix=/home/sbarnett/ffmpeg_build --pkg-config-flags=--static --extra-cflags=-I/home/sbarnett/ffmpeg_build/include --extra-ldflags=-L/home/sbarnett/ffmpeg_build/lib --extra-libs='-lpthread -lm' --bindir=/home/sbarnett/bin --enable-gpl --enable-libass --enable-libfdk-aac --enable-libfreetype --enable-libmp3lame --enable-libopus --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libx265 --enable-libspeex --enable-nonfree
  
    libavutil      56.  7.101 / 56.  7.101
  
    libavcodec     58. 11.101 / 58. 11.101
  
    libavformat    58.  9.100 / 58.  9.100
  
    libavdevice    58.  1.100 / 58.  1.100
  
    libavfilter     7. 12.100 /  7. 12.100
  
    libswscale      5.  0.101 /  5.  0.101
  
    libswresample   3.  0.101 /  3.  0.101
  
    libpostproc    55.  0.100 / 55.  0.100
  
  Input #0, rtsp, from 'rtsp://@10.0.0.16:554/1/h264major':0B f=0/0
  
    Metadata:
  
      title           : h264major
  
      comment         : h264major
  
    Duration: N/A, start: 0.320000, bitrate: N/A
  
      Stream #0:0: Video: h264 (Main), yuvj420p(pc, bt709, progressive), 720x480, 25 fps, 25 tbr, 90k tbn, 50 tbc
  
  [swscaler @ 0x7f6bbc093180] deprecated pixel format used, make sure you did set range correctly
  
  [rtsp @ 0x7f6bc0000940] max delay reached. need to consume packet
  
  [rtsp @ 0x7f6bc0000940] RTP: missed 2 packets
  
  [h264 @ 0x7f6bc0041080] error while decoding MB 44 28, bytestream -37
  
  [h264 @ 0x7f6bc0041080] concealing 95 DC, 95 AC, 95 MV errors in I frame
  
  [rtsp @ 0x7f6bc0000940] max delay reached. need to consume packet
  
  [rtsp @ 0x7f6bc0000940] RTP: missed 1 packets
  
  [h264 @ 0x7f6bc0041080] error while decoding MB 43 29, bytestream -49
  
  [h264 @ 0x7f6bc0041080] concealing 51 DC, 51 AC, 51 MV errors in I frame
  
  [rtsp @ 0x7f6bc0000940] max delay reached. need to consume packet
  
  [rtsp @ 0x7f6bc0000940] RTP: missed 2 packets
  
  [h264 @ 0x7f6bc0041080] Increasing reorder buffer to 1
  
  [rtsp @ 0x7f6bc0000940] max delay reached. need to consume packet
  
  [rtsp @ 0x7f6bc0000940] RTP: missed 3 packets
  
  [h264 @ 0x7f6bc02c3600] error while decoding MB 27 29, bytestream -24
  
  [h264 @ 0x7f6bc02c3600] concealing 67 DC, 67 AC, 67 MV errors in I frame
  
  [rtsp @ 0x7f6bc0000940] max delay reached. need to consume packet
  
  [rtsp @ 0x7f6bc0000940] RTP: missed 2 packets
  
  [rtsp @ 0x7f6bc0000940] max delay reached. need to consume packet
  
  [rtsp @ 0x7f6bc0000940] RTP: missed 42 packets
  
  [rtsp @ 0x7f6bc0000940] max delay reached. need to consume packet
  
  [rtsp @ 0x7f6bc0000940] RTP: missed 2 packets

  Then eventually the video just freezes. The first time it froze after around 5 minutes, but I wasn’t able to say definitively if it froze the instant 44 packets were dropped or if it froze randomly later. So the second time I stared intently.... for 21 minutes. Then I got bored of it not freezing, turned to pet my cat, and when I looked back 15 seconds later it was frozen. I think it only breaks when no one is watching it.

  What I can say definitively is :

  • While running normally, M-V hovers around 0 (anywhere between -0.01 and +0.01)
  • Once frozen, M-V begins to count down into negative numbers without stopping - although at a rate slower than -1 per second
  • While running normally, aq is 0KB and vq is a positive number (I think it was 30KB or so ?)
  • Once frozen, vq is also 0KB

  It’s a really cheap camera with a crummy power supply that goes out if you breathe on it, so it’s likely the camera is going temporarily offline during this time — but I’d like ffmpeg to wait out a timeout and resume streaming when it sees the camera again.

• ffmpeg saves only first frame

  2 juin 2021, par DuDa

  I generated rotating pictures in Python and now I want to create an animation from it using ffmpeg. But the generated video includes only the first frame (viewed in VLC) and is way to small (half the size of one png) for all 36 pictures. What am I doing wrong ? Thank you.

  


  command in shell : ffmpeg -framerate 5 -i "./mov/movie%03d.png" -y "movie.mp4"

  


  Files in Folder mov :

  


  

  • movie000.png

  


  • movie010.png

  


  • ..

  


  • movie350.png

  


  


  ffmpeg version ffmpeg-20170620-ae6f6d4-win64-static

  


  output

  


  ffmpeg version N-86537-gae6f6d4 Copyright (c) 2000-2017 the FFmpeg developers
  built with gcc 7.1.0 (GCC)
  configuration: --enable-gpl --enable-version3 --enable-cuda --enable-cuvid --e
nable-d3d11va --enable-dxva2 --enable-libmfx --enable-nvenc --enable-avisynth --
enable-bzlib --enable-fontconfig --enable-frei0r --enable-gnutls --enable-iconv
--enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-li
bfreetype --enable-libgme --enable-libgsm --enable-libilbc --enable-libmodplug -
-enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enabl
e-libopenh264 --enable-libopenjpeg --enable-libopus --enable-librtmp --enable-li
bsnappy --enable-libsoxr --enable-libspeex --enable-libtheora --enable-libtwolam
e --enable-libvidstab --enable-libvo-amrwbenc --enable-libvorbis --enable-libvpx
 --enable-libwavpack --enable-libwebp --enable-libx264 --enable-libx265 --enable
-libxavs --enable-libxvid --enable-libzimg --enable-lzma --enable-zlib
  libavutil      55. 66.100 / 55. 66.100
  libavcodec     57. 99.100 / 57. 99.100
  libavformat    57. 73.100 / 57. 73.100
  libavdevice    57.  7.100 / 57.  7.100
  libavfilter     6. 94.100 /  6. 94.100
  libswscale      4.  7.101 /  4.  7.101
  libswresample   2.  8.100 /  2.  8.100
  libpostproc    54.  6.100 / 54.  6.100
Input #0, image2, from './mov/movie%03d.png':
  Duration: 00:00:00.20, start: 0.000000, bitrate: N/A
    Stream #0:0: Video: png, rgba(pc), 1152x864 [SAR 2834:2834 DAR 4:3], 5 tbr,
5 tbn, 5 tbc
Stream mapping:
  Stream #0:0 -> #0:0 (png (native) -> h264 (libx264))
Press [q] to stop, [?] for help
No pixel format specified, yuv444p for H.264 encoding chosen.
Use -pix_fmt yuv420p for compatibility with outdated media players.
[libx264 @ 00000000003ec140] using SAR=1/1
[libx264 @ 00000000003ec140] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2
AVX FMA3 BMI2 AVX2
[libx264 @ 00000000003ec140] profile High 4:4:4 Predictive, level 3.2, 4:4:4 8-b
it
[libx264 @ 00000000003ec140] 264 - core 150 r2833 df79067 - H.264/MPEG-4 AVC cod
ec - Copyleft 2003-2017 - http://www.videolan.org/x264.html - options: cabac=1 r
ef=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed
_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pski
p=1 chroma_qp_offset=4 threads=6 lookahead_threads=1 sliced_threads=0 nr=0 decim
ate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_a
dapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=5
scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60
qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
Output #0, mp4, to 'movie.mp4':
  Metadata:
    encoder         : Lavf57.73.100
    Stream #0:0: Video: h264 (libx264) ([33][0][0][0] / 0x0021), yuv444p, 1152x8
64 [SAR 1:1 DAR 4:3], q=-1--1, 5 fps, 10240 tbn, 5 tbc
    Metadata:
      encoder         : Lavc57.99.100 libx264
    Side data:
      cpb: bitrate max/min/avg: 0/0/0 buffer size: 0 vbv_delay: -1
frame=    1 fps=0.0 q=23.0 Lsize=      19kB time=00:00:00.00 bitrate=1581142.9kb
its/s speed=0.00138x
video:18kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing ov
erhead: 4.403838%
[libx264 @ 00000000003ec140] frame I:1     Avg QP:17.26  size: 17865
[libx264 @ 00000000003ec140] mb I  I16..4: 29.6% 56.0% 14.5%
[libx264 @ 00000000003ec140] 8x8 transform intra:56.0%
[libx264 @ 00000000003ec140] coded y,u,v intra: 11.5% 2.3% 6.3%
[libx264 @ 00000000003ec140] i16 v,h,dc,p: 77% 22%  1%  0%
[libx264 @ 00000000003ec140] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 33%  3% 62%  0%  0%
 0%  0%  0%  0%
[libx264 @ 00000000003ec140] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 53% 25% 12%  1%  1%
 2%  1%  2%  1%
[libx264 @ 00000000003ec140] kb/s:714.60


  


• "Pixel format 'yuvj420p' is not supported" when converting image to video using CUDA hardware acceleration

  11 février 2020, par laurent

  I’m trying to convert an image to a video using CUDA hardware acceleration but I can’t get it to work.

  The basic command I have is this one :

  ffmpeg -y -hwaccel cuvid -i tests/MediaSamples/portrait_0.jpg -t 10 out.mp4

  And I’m getting this error :

  [AVHWFramesContext @ 0x32d3f00] Pixel format 'yuvj420p' is not supported
  
  [mjpeg @ 0x2d18480] Error initializing a CUDA frame pool
  
  cuvid hwaccel requested for input stream #0:0, but cannot be initialized.
  
  Error while decoding stream #0:0: Invalid argument

  I’ve tried setting the pixel format like so, but that didn’t help :

  ffmpeg -y -hwaccel cuvid -pix_fmt yuv420p -i tests/MediaSamples/portrait_0.jpg -t 10 out.mp4

  I’ve also tried many other flags but can’t get anything to work. Any idea what the issue might be ?

  For information this is the full log :

  ffmpeg version N-96615-gc35382a Copyright (c) 2000-2020 the FFmpeg developers
  
    built with gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.12) 20160609
  
    configuration: --enable-nonfree --disable-shared --enable-gpl --enable-openssl --enable-libx264 --enable-cuda-sdk --enable-nvenc --enable-cuda --enable-cuvid --enable-libnpp --extra-cflags='-I/usr/local/ssl/include -I/usr/local/cuda/include -I/usr/local/include -L/usr/local/ssl/lib -Wl,-rpath=/usr/local/ssl/lib' --extra-ldflags=-L/usr/local/cuda/lib64
  
    libavutil      56. 38.100 / 56. 38.100
  
    libavcodec     58. 67.101 / 58. 67.101
  
    libavformat    58. 37.100 / 58. 37.100
  
    libavdevice    58.  9.103 / 58.  9.103
  
    libavfilter     7. 73.100 /  7. 73.100
  
    libswscale      5.  6.100 /  5.  6.100
  
    libswresample   3.  6.100 /  3.  6.100
  
    libpostproc    55.  6.100 / 55.  6.100
  
  Input #0, image2, from 'tests/MediaSamples/portrait_0.jpg':
  
    Duration: 00:00:00.04, start: 0.000000, bitrate: 40237 kb/s
  
      Stream #0:0: Video: mjpeg (Progressive), yuvj420p(pc, bt470bg/unknown/unknown), 1600x900 [SAR 72:72 DAR 16:9], 25 tbr, 25 tbn, 25 tbc
  
  Stream mapping:
  
    Stream #0:0 -> #0:0 (mjpeg (native) -> h264 (libx264))
  
  Press [q] to stop, [?] for help
  
  [AVHWFramesContext @ 0x32d3f00] Pixel format 'yuvj420p' is not supported
  
  [mjpeg @ 0x2d18480] Error initializing a CUDA frame pool
  
  cuvid hwaccel requested for input stream #0:0, but cannot be initialized.
  
  Error while decoding stream #0:0: Invalid argument
  
  [libx264 @ 0x2d1e840] using SAR=1/1
  
  [libx264 @ 0x2d1e840] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 AVX2 LZCNT BMI2
  
  [libx264 @ 0x2d1e840] profile High, level 4.0
  
  [libx264 @ 0x2d1e840] 264 - core 148 r2643 5c65704 - H.264/MPEG-4 AVC codec - Copyleft 2003-2015 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=24 lookahead_threads=4 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
  
  Output #0, mp4, to 'out.mp4':
  
    Metadata:
  
      encoder         : Lavf58.37.100
  
      Stream #0:0: Video: h264 (libx264) (avc1 / 0x31637661), yuvj420p(pc), 1600x900 [SAR 72:72 DAR 16:9], q=-1--1, 25 fps, 12800 tbn, 25 tbc
  
      Metadata:
  
        encoder         : Lavc58.67.101 libx264
  
      Side data:
  
        cpb: bitrate max/min/avg: 0/0/0 buffer size: 0 vbv_delay: N/A
  
  frame=    0 fps=0.0 q=0.0 Lsize=       0kB time=00:00:00.00 bitrate=N/A speed=   0x
  
  video:0kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: unknown
  
  Conversion failed!