Recherche avancée

Sur d’autres sites (11763)

• Notes on Linux for Dreamcast

  23 février 2011, par Multimedia Mike — Sega Dreamcast, VP8

  I wanted to write down some notes about compiling Linux on Dreamcast (which I have yet to follow through to success). But before I do, allow me to follow up on my last post where I got Google’s libvpx library decoding VP8 video on the DC. Remember when I said the graphics hardware could only process variations of RGB color formats ? I was mistaken. Reading over some old documentation, I noticed that the DC’s PowerVR hardware can also handle packed YUV textures (UYVY, specifically) :

  
  
  

  The video looks pretty sharp in the small photo. Up close, less so, due to the low resolution and high quantization of the test vector combined with the naive chroma upscaling. For the curious, the grey box surrounding the image highlights the 256-square texture that the video frame gets plotted on. Texture dimensions have to be powers of 2.

  Notes on Linux for Dreamcast
  I’ve occasionally dabbled with Linux on my Dreamcast. There’s an ancient (circa 2001) distro based around a build of kernel 2.4.5 out there. But I wanted to try to get something more current compiled. Thus far, I have figured out how to cross compile kernels pretty handily but have been unsuccessful in making them run.

  Here are notes are the compilation portion :
  

  • kernel.org provides a very useful set of cross compiling toolchains
  • get the gcc 4.5.1 cross toolchain for SH-4 (the gcc 4.3.3 one won’t work because the binutils is too old ; it will fail to assemble certain instructions as described in this post)
  • working off of Linux kernel 2.6.37, edit the top-level Makefile ; find the ARCH and CROSS_COMPILE variables and set appropriately :

    ARCH ?= sh
    CROSS_COMPILE ?= /path/to/gcc-4.5.1-nolibc/sh4-linux/bin/sh4-linux-
    

  • $ make dreamcast_defconfig
  • $ make menuconfig ... if any changes to the default configuration are desired
  • manually edit arch/sh/Makefile, changing :

    cflags-$(CONFIG_CPU_SH4) := $(call cc-option,-m4,) \
            $(call cc-option,-mno-implicit-fp,-m4-nofpu)
    

    to :

    cflags-$(CONFIG_CPU_SH4) := $(call cc-option,-m4,) \
            $(call cc-option,-mno-implicit-fp)
    

    I.e., remove the '-m4-nofpu' option. According to the gcc man page, this will "Generate code for the SH4 without a floating-point unit." Why this is a default is a mystery since the DC’s SH-4 has an FPU and compilation fails when enabling this option.

  • On that note, I was always under the impression that the DC sported an SH-4 CPU with the model number SH7750. According to this LinuxSH wiki page as well as the Linux kernel help, it actually has an SH7091 variant. This photo of the physical DC hardware corroborates the model number.
  • $ make ... to build a Linux kernel for the Sega Dreamcast

  Running
  So I can compile the kernel but running the kernel (the resulting vmlinux ELF file) gives me trouble. The default kernel ELF file reports an entry point of 0x8c002000. Attempting to upload this through the serial uploading facility I have available to me triggers a system reset almost immediately, probably because that’s the same place that the bootloader calls home. I have attempted to alter the starting address via ’make menuconfig’ -> System type -> Memory management options -> Physical memory start address. This allows the upload to complete but it still does not run. It’s worth noting that the 2.4.5 vmlinux file from the old distribution can be executed when uploaded through the serial loader, and it begins at 0x8c210000.

• Multimedia Exploration Journal : The Past Doesn’t Die

  12 juillet 2011, par Multimedia Mike — Game Hacking

  New haul of games, new (old) multimedia formats.

  Lords of Midnight
  Check out the box copy scan for Lords of Midnight in MobyGames. In particular, I’d like to call your attention to this little blurb :

  
  
  

  Ahem, "Journey through an immense world — the equivalent of 8 CD-ROMs." Yet, when I procured the game, it only came on a single CD-ROM. It’s definitely a CD-ROM (says so on the disc) and, coming from 1995, certainly predates the earliest DVD-ROMs (which can easily store 8 CD-ROMs on a disc). Thus, I wanted to jump in a see if they were using some phenomenal compression in order to squeeze so much info into 600 or so megabytes.

  I was surprised to see the contents of the disc clocking in at just under 40 megabytes. An intro movie and an outro movie account for 75% of that. Format ? None other than that curious ASCII anomaly, ARMovie/RPL with Escape 122 codec data.

  Cyclemania

  
  
  

  Cyclemania is one of those FMV backdrop action games, but with a motorcycle theme. I had a good feeling I would find some odd multimedia artifacts here and the game didn’t disappoint. The videos are apparently handled using 3-4 discrete files per animation. I’ve documented my cursory guesses and linked some samples at the new MultimediaWiki page.

  Interplay ACMP
  This is unrelated to this particular acquistion, but I was contacted today about audio files harvested from the 1993 DOS game Star Trek : Judgment Rites. The files begin with the ASCII signature "Interplay ACMP Data". This reminds me of Interplay MVE files which begin with the similar string "Interplay MVE File". My theory is that these files use the ACOMP compression format, though I’m still trying to make it fit.

  Wiki and samples are available as usual if you’d like to add your own research.

• H264 : decode series of nal units with ffmpeg

  1er août 2014, par jsim

  I tried to decode a series of nal units with ffmpeg (libavcodec) but I get a "no frame" error. I produced the nal units with the guideline at http://stackoverflow.com/questions/2940671/how-to-encode-series-of-images-into-h264-using-x264-api-c-c. I tried the following strategy for decoding :

  avcodec_init();  
  
  avcodec_register_all();  
  
  AVCodec* pCodec;  
  
  pCodec=lpavcodec_find_decoder(CODEC_ID_H264);  
  
  AVCodecContext* pCodecContext;  
  
  pCodecContext=lpavcodec_alloc_context();  
  
  avcodec_open(pCodecContext,pCodec);  
  
  AVFrame *pFrame;  
  
  pFrame=avcodec_alloc_frame();
  
  //for every nal unit:    
  
      int frameFinished=0;  
  
      //nalData2 is nalData without the first 4 bytes
  
      avcodec_decode_video(pCodecContext,pFrame,&frameFinished,(uint8_t*) nalData2,nalLength);

  I passed all units I got to this code but frameFinished stays 0. I guess there must be something wrong with the pCodecContext setup. Can someone send me a working example ?

  Thank you