Recherche avancée
Autres articles (99)
-
Multilang : améliorer l’interface pour les blocs multilingues
18 février 2011, parMultilang est un plugin supplémentaire qui n’est pas activé par défaut lors de l’initialisation de MediaSPIP.
Après son activation, une préconfiguration est mise en place automatiquement par MediaSPIP init permettant à la nouvelle fonctionnalité d’être automatiquement opérationnelle. Il n’est donc pas obligatoire de passer par une étape de configuration pour cela. -
Participer à sa traduction
10 avril 2011Vous pouvez nous aider à améliorer les locutions utilisées dans le logiciel ou à traduire celui-ci dans n’importe qu’elle nouvelle langue permettant sa diffusion à de nouvelles communautés linguistiques.
Pour ce faire, on utilise l’interface de traduction de SPIP où l’ensemble des modules de langue de MediaSPIP sont à disposition. ll vous suffit de vous inscrire sur la liste de discussion des traducteurs pour demander plus d’informations.
Actuellement MediaSPIP n’est disponible qu’en français et (...) -
MediaSPIP 0.1 Beta version
25 avril 2011, parMediaSPIP 0.1 beta is the first version of MediaSPIP proclaimed as "usable".
The zip file provided here only contains the sources of MediaSPIP in its standalone version.
To get a working installation, you must manually install all-software dependencies on the server.
If you want to use this archive for an installation in "farm mode", you will also need to proceed to other manual (...)
Sur d’autres sites (14020)
-
avcodec/proresenc_anatoliy : only pass down the first scale to encode_dcs()
11 décembre 2023, par Clément Bœsch -
Getting and decoding video by RTP H264
29 novembre 2023, par AlekseiKraevParsing RTP H264.
WINAPI C. A queue from C++ has been applied, I repent.


RTP is generated using FFMPEG with the following command :
ffmpeg.exe -f gdigrab -framerate 25 -i desktop -s 853x480 -b:v 120000 -c:v libx264 -f rtp rtp ://127.0.0.1:8080


Parsing the incoming RTP/h264 stream and converting it to an RGB matrix.


video_H264_decode.h


#pragma once
#ifndef _VIDEO_H264_DECODE_SEND_H // Блокируем повторное включение этого модуля
#define _VIDEO_H264_DECODE_SEND_H
//******************************************************************************
// Section include
//******************************************************************************
#include "main.h"
#include 
//******************************************************************************
// Constants
//******************************************************************************

//******************************************************************************
// Type
//******************************************************************************
typedef struct {
 unsigned char* data;
 int size;
}RTPData_DType;

typedef struct 
{
 union
 {
 struct
 {
 char V:2; //Версия
 char P:1; //заполнение
 char X:1; //расширение
 char CC:4; //количество CSRC

 char M:1; //маркер (флаг последнего пакета AU),
 char PT:7; //полезная нагрузка (тип данных носителя полезной нагрузки RTP, H264 = 96)

 short sequence_number; //Порядковый номер: порядковый номер пакета RTP, увеличенный на 1.
 int time_stamp; //временная метка выборки медиа. 
 int SSRC; //Пакет данных имеет одинаковое происхождение.
 };
 unsigned char data[12];
 };
}RTPHeader_DType;
//******************************************************************************
// Global var
//******************************************************************************

//******************************************************************************
// Local function prototype
//******************************************************************************
UCHAR rtp_H264_recive_init(void);
UCHAR RTPStop(void);
//******************************************************************************
// Macros
//******************************************************************************
#define BYTE2_SWAP(X) ((((short)(X) & 0xff00) >> 8) |(((short)(X) & 0x00ff) << 8))
#endif
//******************************************************************************
// ENF OF FILE
//******************************************************************************


video_H264_decode.c


//******************************************************************************
//include
//******************************************************************************
#include "main.h"
/*#include "video_H264_decode.h"
#include 
#include 
#include <chrono>
#include 

#pragma comment(lib, "ws2_32.lib")
#include */
#include <iostream>
#include <queue>

extern "C" {
#include "libavformat/avformat.h"
#include "libavfilter/avfilter.h"
#include "libavdevice/avdevice.h"
#include "libswscale/swscale.h"
#include "libswresample/swresample.h"
#include "libpostproc/postprocess.h"
#include "libavcodec/avcodec.h"
}

#pragma comment(lib,"avcodec.lib")
#pragma comment(lib,"avdevice.lib")
#pragma comment(lib,"avfilter.lib")
#pragma comment(lib,"avformat.lib")
#pragma comment(lib,"avutil.lib")
#pragma comment(lib,"postproc.lib")
#pragma comment(lib,"swresample.lib")
#pragma comment(lib,"swscale.lib")

#pragma warning(disable: 4996)
//******************************************************************************
// Section for determining the variables used in the module
//******************************************************************************
//------------------------------------------------------------------------------
// Global
//------------------------------------------------------------------------------

//------------------------------------------------------------------------------
// Local
//------------------------------------------------------------------------------
const int inteval = 0x01000000;
BOOL FlagRTPActive = TRUE;

HANDLE hMutexRTPRecive;
HANDLE hSemaphoreRTP;
HANDLE hTreadRTPRecive;
HANDLE hTreadRTPDecode;


SOCKET RTPSocket; //socket UDP RTP
RTPData_DType packet;
RTPData_DType FU_buffer = { 0 };

std::queue q;
std::set<int> seq;

AVFormatContext* pAVFormatContext;
AVCodecContext* pAVCodecContext;
const AVCodec* pAVCodec;
AVFrame* pAVFrame;
AVFrame* AVFrameRGG;
SwsContext* pSwsContext;
AVPacket *pAVPacket;
AVCodecParserContext* pAVCodecParserContext;

UINT port;
//******************************************************************************
// Section of prototypes of local functions
//******************************************************************************
DWORD WINAPI rtp_H264_recive_Procedure(CONST LPVOID lpParam);
DWORD WINAPI rtp_decode_Procedure(CONST LPVOID lpParam);
char RTPSocketInit(void);
void RTPPacketParser(void);
char RTPSocketRecive(void);
void Decode_NaluToAVFrameRGG();
//******************************************************************************
// Section of the description of functions
//******************************************************************************
UCHAR rtp_H264_recive_init(void)
{
 hSemaphoreRTP = CreateSemaphore(
 NULL, // default security attributes
 0, // initial count
 1, // maximum count
 NULL); // unnamed semaphore

 hMutexRTPRecive = CreateMutex(
 NULL, // default security attributes
 FALSE, // initially not owned
 NULL); // unnamed mutex

 hTreadRTPRecive = CreateThread(NULL, NULL, rtp_H264_recive_Procedure, NULL, NULL, NULL);
 hTreadRTPDecode = CreateThread(NULL, NULL, rtp_decode_Procedure, NULL, NULL, NULL);

 return 0;
}
//------------------------------------------------------------------------------
UCHAR RTPStop(void)
{
 FlagRTPActive = FALSE;

 if (hSemaphoreRTP) CloseHandle(hSemaphoreRTP);
 if (hMutexRTPRecive) CloseHandle(hMutexRTPRecive);
 if (hTreadRTPRecive) CloseHandle(hTreadRTPRecive);

 closesocket(RTPSocket); 

 return 0;
}
//------------------------------------------------------------------------------
DWORD WINAPI rtp_H264_recive_Procedure(CONST LPVOID lpParam)
{
 while (RTPSocketInit() == 0)
 Sleep(2000);
 
 while (1)
 {
 RTPSocketRecive();
 RTPPacketParser();
 ReleaseSemaphore(hSemaphoreRTP, 1, NULL);
 }
}
//------------------------------------------------------------------------------
DWORD WINAPI rtp_decode_Procedure(CONST LPVOID lpParam)
{
 port = param.Option.VideoPort;

 pAVPacket = av_packet_alloc();
 if (!pAVPacket)
 {
 MessageBox(NULL, L"ERROR Could not allocate pAVPacket", L"Init decoder error", MB_OK | MB_ICONERROR);
 exit(1);
 }
 av_init_packet(pAVPacket);

 /* find the MPEG-1 video decoder */
 pAVCodec = avcodec_find_decoder(AV_CODEC_ID_H264);
 if (!pAVCodec)
 {
 MessageBox(NULL, L"ERROR Codec not found", L"Init decoder error", MB_OK | MB_ICONERROR);
 exit(1);
 }

 pAVCodecParserContext = av_parser_init(pAVCodec->id);
 if (!pAVCodecParserContext)
 {
 MessageBox(NULL, L"ERROR Parser not found", L"Init decoder error", MB_OK | MB_ICONERROR);
 exit(1);
 }

 pAVCodecContext = avcodec_alloc_context3(pAVCodec);
 if (!pAVCodecContext) 
 {
 MessageBox(NULL, L"ERROR Could not allocate video codec context", L"Init decoder error", MB_OK | MB_ICONERROR);
 exit(1);
 }
 
 if (avcodec_open2(pAVCodecContext, pAVCodec, NULL) < 0)
 {
 MessageBox(NULL, L"ERROR Could not open codec", L"Init decoder error", MB_OK | MB_ICONERROR);
 exit(1);
 }

 pAVFrame = av_frame_alloc();
 if (!pAVFrame) 
 {
 MessageBox(NULL, L"ERROR Could not allocate video frame", L"Init decoder error", MB_OK | MB_ICONERROR);
 exit(1);
 } 
 
 while (FlagRTPActive)
 {
 if(port != param.Option.VideoPort)
 closesocket(RTPSocket);

 WaitForSingleObject(hSemaphoreRTP, 500); 
 Decode_NaluToAVFrameRGG();
 }

 avformat_free_context(pAVFormatContext);
 av_frame_free(&pAVFrame);
 avcodec_close(pAVCodecContext);
 av_packet_free(&pAVPacket);

 
 if (hTreadRTPDecode) CloseHandle(hTreadRTPDecode);

 return 0;
}

//------------------------------------------------------------------------------
char RTPSocketInit(void)
{ 
 sockaddr_in RTPSocketAddr;
 
 RTPSocketAddr.sin_family = AF_INET;
 RTPSocketAddr.sin_addr.s_addr = htonl(INADDR_ANY);
 RTPSocketAddr.sin_port = htons(param.Option.VideoPort);

 RTPSocket = socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP);
 if (RTPSocket == INVALID_SOCKET)
 {
 MessageBox(NULL, L"ERROR Invalid RTP Socket", L"UDP Socket", MB_OK | MB_ICONERROR);
 return 0;
 }

 int option = 12000;
 if (setsockopt(RTPSocket, SOL_SOCKET, SO_RCVBUF, (char*)&option, sizeof(option)) < 0)
 {
 printf("setsockopt failed\n");

 }

 /*option = TRUE;
 if (setsockopt(RTPSocket, SOL_SOCKET, SO_CONDITIONAL_ACCEPT, (char*)&option, sizeof(option)) < 0)
 {
 printf("setsockopt failed\n");

 }*/

 if (bind(RTPSocket, (sockaddr*)&RTPSocketAddr, sizeof(RTPSocketAddr)) == SOCKET_ERROR)
 {
 MessageBox(NULL, L"ERROR bind", L"UDP Socket", MB_OK | MB_ICONERROR);
 closesocket(RTPSocket);
 return 0;
 }
 return 1;
}

//------------------------------------------------------------------------------
char RTPSocketRecive(void)
{
 static char RecvBuf[2000];
 static int BufLen = 2000;

 int iResult = 0;
 struct sockaddr_in SenderAddr;
 int SenderAddrSize = sizeof(SenderAddr);
 TCHAR szErrorMsg[100];

 iResult = recvfrom(RTPSocket, RecvBuf, BufLen, 0, NULL, NULL);
 if (iResult == SOCKET_ERROR && FlagRTPActive == TRUE)
 {
 StringCchPrintf(szErrorMsg, 100, L"ERROR recvfrom Ошибка:%d", WSAGetLastError());
 MessageBox(NULL, szErrorMsg, L"UDP Socket", MB_OK | MB_ICONERROR);
 return -1;
 }

 packet.data = (unsigned char*)RecvBuf;
 packet.size = iResult;

 return 1;
}

//------------------------------------------------------------------------------
void RTPPacketParser(void)
{
 RTPHeader_DType RTPHeader;
 RTPData_DType NALU;
 unsigned char* buffer = packet.data;
 int pos = 0;
 static int count = 0;
 static short lastSequenceNumber = 0xFFFF;
 short type;
 char payload_header;

 //read rtp header
 memcpy(&RTPHeader, buffer, sizeof(RTPHeader));
 RTPHeader.sequence_number = BYTE2_SWAP(RTPHeader.sequence_number);
 pos += 12; 
 
 if (RTPHeader.X) {
 //profile extension
 short define;
 short length;
 length = buffer[pos + 3];//suppose not so long extension
 pos += 4;
 pos += (length * 4);
 }

 payload_header = buffer[pos];
 type = payload_header & 0x1f; //Тип полезной нагрузки RTP
 pos++;
 
 //STAP-A
 if (type == 24)
 { 
 while (pos < packet.size)
 {
 unsigned short NALU_size;
 memcpy(&NALU_size, buffer + pos, 2);
 NALU_size = BYTE2_SWAP(NALU_size);
 pos += 2;
 char NAL_header = buffer[pos];
 short NAL_type = NAL_header & 0x1f;

 if (NAL_type == 7) 
 {
 count++;
 //cout<<"SPS, sequence number: "</cout<<"PPS, sequence number: "</cout<<"end of sequence, sequence number: "< 0) 
 {
 NALU.data = (unsigned char*) malloc(NALU_size + 4);
 NALU.size = NALU_size + 4;
 memcpy(NALU.data, &inteval, 4);
 memcpy(NALU.data + 4, &buffer[pos], NALU_size);

 WaitForSingleObject(hMutexRTPRecive, INFINITE);
 q.push(NALU);
 ReleaseMutex(hMutexRTPRecive);
 }

 pos += NALU_size;
 }
 }
 //FU-A Fragmentation unit
 else if (type == 28)
 { 
 //FU header
 char FU_header = buffer[pos];
 bool fStart = FU_header & 0x80;
 bool fEnd = FU_header & 0x40;

 //NAL header
 char NAL_header = (payload_header & 0xe0) | (FU_header & 0x1f);
 short NAL_type = FU_header & 0x1f;
 if (NAL_type == 7) 
 {
 count++;
 //SPS
 }
 else if (NAL_type == 8) 
 {
 //PPS
 }
 else if (NAL_type == 10) 
 {
 //end of sequence
 }
 pos++;

 int size = packet.size - pos;
 
 if (count > 0)
 {
 if (fStart) 
 {
 if (FU_buffer.size != 0)
 {
 free(FU_buffer.data);
 FU_buffer.size = 0;
 }
 FU_buffer.data = (unsigned char*)malloc(size + 5);
 if (FU_buffer.data == NULL)
 return;
 FU_buffer.size = size + 5;
 memcpy(FU_buffer.data, &inteval, 4);
 memcpy(FU_buffer.data + 4, &NAL_header, 1);
 memcpy(FU_buffer.data + 5, buffer + pos, size);
 }
 else
 {
 unsigned char* temp = (unsigned char*)malloc(FU_buffer.size + size);
 memcpy(temp, FU_buffer.data, FU_buffer.size);
 memcpy(temp + FU_buffer.size, buffer + pos, size);
 if (FU_buffer.size != 0) free(FU_buffer.data);
 FU_buffer.data = temp;
 FU_buffer.size += size;
 }

 if (fEnd)
 {
 NALU.data = (unsigned char*)malloc(FU_buffer.size);
 NALU.size = FU_buffer.size;
 memcpy(NALU.data, FU_buffer.data, FU_buffer.size);

 WaitForSingleObject(hMutexRTPRecive, INFINITE);
 q.push(NALU);
 ReleaseMutex(hMutexRTPRecive);

 free(FU_buffer.data);
 FU_buffer.size = 0;
 }
 }
 
 }
 else 
 {
 //other type
 short NAL_type = type;
 if (NAL_type == 7) 
 {
 count++;
 //SPS
 }
 else if (NAL_type == 8) 
 {
 //PPS
 }
 else if (NAL_type == 10) 
 {
 //end of sequence
 }

 int size = packet.size - pos + 1;
 if (count > 0)
 {
 NALU.data = (unsigned char*)malloc(size+4);
 NALU.size = size + 4;
 memcpy(NALU.data, &inteval, 4);
 memcpy(NALU.data + 4, &buffer[12], size);

 WaitForSingleObject(hMutexRTPRecive, INFINITE);
 q.push(NALU);
 ReleaseMutex(hMutexRTPRecive);
 }
 }
}

//------------------------------------------------------------------------------
void Decode_NaluToAVFrameRGG()
{
 unsigned char cntNALU;
 int len = 0;
 static int size = 0;
 unsigned char* data = NULL;
 int ret;
 RTPData_DType NALU;

 av_frame_unref(pAVFrame);
 av_packet_unref(pAVPacket);

 while(1)
 {
 WaitForSingleObject(hMutexRTPRecive, INFINITE);
 if (q.empty())
 {
 ReleaseMutex(hMutexRTPRecive);
 break;
 }
 NALU = q.front();
 q.pop();
 ReleaseMutex(hMutexRTPRecive);

 data = NALU.data;
 size = NALU.size;

 while(size)
 { 
 len = av_parser_parse2(pAVCodecParserContext, pAVCodecContext, &pAVPacket->data, &pAVPacket->size,
 (uint8_t*)data, size,
 AV_NOPTS_VALUE, AV_NOPTS_VALUE, AV_NOPTS_VALUE);

 data = len ? data + len : data;
 size -= len;
 
 if (pAVPacket->size)
 {
 ret = avcodec_send_packet(pAVCodecContext, pAVPacket);

 if(ret == AVERROR_EOF)
 MessageBox(NULL, L"the codec has been fully flushed, and there will be no more output frames", L"avcodec_send_packet", MB_OK | MB_ICONERROR);

 if (ret < 0)
 {
 MessageBox(NULL, L"ERROR sending a packet for decoding", L"Decode", MB_OK | MB_ICONERROR);
 //exit(1);
 }

 while (ret >= 0) 
 {
 ret = avcodec_receive_frame(pAVCodecContext, pAVFrame);
 if (ret == AVERROR(EAGAIN) || ret == AVERROR_EOF)
 break;
 else if (ret < 0) {
 MessageBox(NULL, L"ERROR during decoding", L"Decode", MB_OK | MB_ICONERROR);
 //exit(1);
 }
 
 AVFrameRGG = av_frame_alloc(); 
 pSwsContext = sws_getContext(pAVCodecContext->width, pAVCodecContext->height, pAVCodecContext->pix_fmt,
 pAVCodecContext->width, pAVCodecContext->height, AV_PIX_FMT_RGB24, SWS_SPLINE,
 0, 0, 0);

 sws_scale_frame(pSwsContext, AVFrameRGG, pAVFrame);
 
 ImgBufferSet(AVFrameRGG->data[0], pAVCodecContext->height, pAVCodecContext->width, AVFrameRGG->linesize[0]);

 sws_freeContext(pSwsContext);
 av_frame_free(&AVFrameRGG);
 }
 }
 }
 free(NALU.data);
 NALU.size = 0;
 } 
}

</int></queue></iostream></chrono>

It's DECIDED


-
PHP : Convert file with FFMPEG and upload to S3 using shell_exec() and aws cli tools
18 septembre 2017, par andreaemI need a script that handle the upload of a video file from
dropzone.js, convert tom4vthen generate 5 thumbnails using the name of file appending-(number)to each jpg file (eg :file-1.jpg,file-2.jpg,file-3.jpgetc) and finally upload to s3 using shell_script (or maybe if there is a better way to do this).Recap
- Upload file in a temp dir
- Convert file to
.m4v - Generate 5 thumbnails from video
- Upload the converted video to Amazon S3
- Delete local video file
Here is my code, at the moment I don’t know where the file goes and nothing seems to be uploaded to Amazon S3 (doing the upload in command-line works, so the credentials are ok).
Dropzone.js
$("#dZUpload").dropzone({
url: "/ajax/admin/admin.acceptVideo.php",
maxFilesize: 200,
renameFile: new Date,
acceptedFiles: "video/*",
addRemoveLinks: true,
success: function (file, response) {
var imgName = response; file.previewElement.classList.add("dz-success");
console.log("Successfully uploaded :" + imgName);
$('#form_video').val(file);
},
error: function (file, response) {file.previewElement.classList.add("dz-error");
}
}).autoDiscover = false;
Dropzone.prototype.defaultOptions.dictRemoveFile = "Rimuovi file";
Dropzone.on("addedfile", function(file) {
var cancelLink = Dropzone.createElement('<a>Cancel upload</a>');
file.previewElement.appendChild(cancelLink);
cancelLink.addEventListener("click", function(e) {
e.preventDefault();
myDropzone.cancelUpload(file);
});
});PHP
$target_dir = "/var/www/html/example.com/web/temp/";
$target_file = $target_dir . basename($_FILES["file"]["name"]);
$uploadOk = 1;
$imageFileType = pathinfo($target_file,PATHINFO_EXTENSION);
// Check if image file is a actual image or fake image
if(isset($_POST["submit"])) {
$check = getimagesize($_FILES["file"]["tmp_name"]);
if($check !== false) {
echo "File is a video - " . $check["mime"] . ".";
$uploadOk = 1;
} else {
echo "File is not an image.";
$uploadOk = 0;
}
}
// Check if file already exists
if (file_exists($target_file)) {
echo "Sorry, file already exists.";
$uploadOk = 0;
}
// Check file size
if ($_FILES["fileToUpload"]["size"] > 200000000) {
echo "Sorry, your file is too large.";
$uploadOk = 0;
}
// Allow certain file formats
if($imageFileType != "mp4" && $imageFileType != "mov" && $imageFileType != "avi" && $imageFileType != "m4v" ) {
echo "Sorry, only MP4 MOV AVI M4V files are allowed.";
$uploadOk = 0;
}
// Check if $uploadOk is set to 0 by an error
if ($uploadOk == 0) {
echo "Sorry, your file was not uploaded.";
// if everything is ok, try to upload file
} else {
if (move_uploaded_file($_FILES["file"]["tmp_name"], $target_file)) {
S3Up(VideoConvert(basename( $_FILES["file"]["name"]),random_int('1','9999')));
echo "The file ". basename( $_FILES["file"]["name"]). " has been uploaded.";
} else {
echo "Sorry, there was an error uploading your file.";
}
}
function VideoConvert($video, $id) {
shell_exec('ffmpeg -i ' . $video . ' /var/www/html/example.com/web/temp/' . $id . '.m4v');
for ($i=0;$i <= 5;$i++) {
shell_exec('ffmpeg -i ' . $video .' -vf "select=gte(n\,' . $i .'00)" -vframes 1 ' .$id . '-' . $i. '.jpg');
}
return '/var/www/html/example.com/web/temp/' . $id . '.m4v';
}
function S3Up($video) {
shell_exec('aws s3 cp ' . $video .' s3://example-video/ --grants read=uri=http://acs.amazonaws.com/groups/global/AllUsers');
sleep(1);
//shell_exec('rm '. $video);
}Here is my error.log line relating to s3 upload :
error.log
example.mp4: No such file or directory
Traceback (most recent call last):
File "/usr/local/bin/aws", line 19, in <module>
import awscli.clidriver
File "/usr/local/lib/python2.7/dist-packages/awscli/clidriver.py", line 17, in <module>
import botocore.session
File "/usr/local/lib/python2.7/dist-packages/botocore/session.py", line 26, in <module>
import botocore.credentials
File "/usr/local/lib/python2.7/dist-packages/botocore/credentials.py", line 22, in <module>
from dateutil.parser import parse
ImportError: No module named dateutil.parser
</module></module></module></module>How can I improve this ? I’ve tried using aws php api but got some problems with credentials, cli tools don’t have.
Behavior
At the moment
dropzone.jsstop uploading at 50% if I put a file of 8 MB, php maxUploadSize directive is set to 201M, php upload temp folder is inside the site root directory and permissions set to 7777. File where uploaded if I put a smallest file of 200Kb but don’t convert and make a 0 byte file.
Syndiquer tout le site
