Recherche avancée

Sur d’autres sites (12722)

• FFMPEG error submitting a packet to the muxer

  27 juillet 2024, par Badgio10177

  I am attempting to stream video frames to a RTSP server using FFMPEG. I instantiate an ffmpeg pipeline in c++. There are times when the process works perfectly and other times I get the error Error submitting a packet to the muxer : Broken pipe. Error muxing a packet. What uis strange is that there are times when the stream works and times when it does not which leads me to believe that the FFMPEG parameters that I set are not necessarily incorrect.

  


  I am using a mex function within MATLAB to take in a frame and stream it.

  


  // Global variables&#xA;FILE* openPipeLine = NULL;&#xA;&#xA;void mexFunction(int nlhs, mxArray *plhs[], int nrhs, const mxArray *prhs[], int frameWidth, int frameHeight)&#xA;{&#xA;&#xA;    Ptr<mat> inputFrame = ocvMxArrayToImage_uint8(prhs[0], true);&#xA;    Mat processedFrame = *inputFrame;&#xA;&#xA;    // Check if FFMPEG process has been started&#xA;    if (!openPipeLine)&#xA;    {&#xA;        openPipeLine = _popen("ffmpeg -report -f rawvideo -r 10 -video_size 1280x720 -pixel_format bgr24 -i pipe: -vcodec libx264 -pix_fmt yuv420p -f rtsp rtsp://localhost:8554/mystream 2> log.txt", "wb");&#xA;&#xA;    }&#xA;&#xA;    // Write the frame data to the pipeline&#xA;    fwrite(processedFrame.data, 1, frameWidth * frameHeight * 3, openPipeLine);&#xA;    mexAtExit(exitFcn);&#xA;}&#xA;</mat>

  


  Below is the full report from the ffmpeg process. Do my operating system variables change from time to time which cause the stream to work at times and break at others ? I am using Windows 10.

  


  Log level: 48
Command line:
ffmpeg -report -f rawvideo -r 10 -video_size 1280x720 -pixel_format bgr24 -i pipe: -vcodec libx264 -pix_fmt yuv420p -f rtsp rtsp://localhost:8554/mystream

  built with gcc 12.2.0 (Rev10, Built by MSYS2 project)
  configuration: --enable-gpl --enable-version3 --enable-static --disable-w32threads --disable-autodetect --enable-fontconfig --enable-iconv --enable-gnutls --enable-libxml2 --enable-gmp --enable-bzlib --enable-lzma --enable-libsnappy --enable-zlib --enable-librist --enable-libsrt --enable-libssh --enable-libzmq --enable-avisynth --enable-libbluray --enable-libcaca --enable-sdl2 --enable-libaribb24 --enable-libaribcaption --enable-libdav1d --enable-libdavs2 --enable-libuavs3d --enable-libzvbi --enable-librav1e --enable-libsvtav1 --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxavs2 --enable-libxvid --enable-libaom --enable-libjxl --enable-libopenjpeg --enable-libvpx --enable-mediafoundation --enable-libass --enable-frei0r --enable-libfreetype --enable-libfribidi --enable-libharfbuzz --enable-liblensfun --enable-libvidstab --enable-libvmaf --enable-libzimg --enable-amf --enable-cuda-llvm --enable-cuvid --enable-ffnvcodec --enable-nvdec --enable-nvenc --enable-d3d11va --enable-dxva2 --enable-lib  libavutil      58. 16.101 / 58. 16.101
  libavcodec     60. 23.100 / 60. 23.100
  libavformat    60. 10.100 / 60. 10.100
  libavdevice    60.  2.101 / 60.  2.101
  libavfilter     9. 11.100 /  9. 11.100
  libswscale      7.  3.100 /  7.  3.100
  libswresample   4. 11.100 /  4. 11.100
  libpostproc    57.  2.100 / 57.  2.100
Splitting the commandline.

Successfully parsed a group of options.
Opening an input file: pipe:.
[rawvideo @ 00000182dba5efc0] Opening 'pipe:' for reading
[pipe @ 00000182dba611c0] Setting default whitelist 'crypto,data'
[rawvideo @ 00000182dba5efc0] Before avformat_find_stream_info() pos: 0 bytes read:65536 seeks:0 nb_streams:1
[rawvideo @ 00000182dba5efc0] All info found
[rawvideo @ 00000182dba5efc0] After avformat_find_stream_info() pos: 2764800 bytes read:2764800 seeks:0 frames:1
Input #0, rawvideo, from 'pipe:':
  Duration: N/A, start: 0.000000, bitrate: 221184 kb/s
  Stream #0:0, 1, 1/10: Video: rawvideo (BGR[24] / 0x18524742), bgr24, 1280x720, 221184 kb/s, 10 tbr, 10 tbn
Successfully opened the file.
Parsing a group of options: output url rtsp://192.168.0.2:8554/mystream.
Applying option vcodec (force video codec ('copy' to copy stream)) with argument libx264.
Applying option pix_fmt (set pixel format) with argument yuv420p.
Applying option f (force format) with argument rtsp.
Successfully parsed a group of options.
Opening an output file: rtsp://192.168.0.2:8554/mystream.
[out#0/rtsp @ 00000182dba72c00] No explicit maps, mapping streams automatically...
[vost#0:0/libx264 @ 00000182dba75cc0] Created video stream from input stream 0:0
Successfully opened the file.
Stream mapping:
  Stream #0:0 -> #0:0 (rawvideo (native) -> h264 (libx264))
[rawvideo @ 00000182dba72700] PACKET SIZE: 2764800, STRIDE: 3840
detected 16 logical cores
[graph 0 input from stream 0:0 @ 00000182dba86180] Setting 'video_size' to value '1280x720'
[graph 0 input from stream 0:0 @ 00000182dba86180] Setting 'pix_fmt' to value '3'
[graph 0 input from stream 0:0 @ 00000182dba86180] Setting 'time_base' to value '1/10'
[graph 0 input from stream 0:0 @ 00000182dba86180] Setting 'pixel_aspect' to value '0/1'
[graph 0 input from stream 0:0 @ 00000182dba86180] Setting 'frame_rate' to value '10/1'
[graph 0 input from stream 0:0 @ 00000182dba86180] w:1280 h:720 pixfmt:bgr24 tb:1/10 fr:10/1 sar:0/1
[format @ 00000182dba86540] Setting 'pix_fmts' to value 'yuv420p'
[auto_scale_0 @ 00000182dba869c0] w:iw h:ih flags:'' interl:0
[format @ 00000182dba86540] auto-inserting filter 'auto_scale_0' between the filter 'Parsed_null_0' and the filter 'format'
[AVFilterGraph @ 00000182dba49040] query_formats: 4 queried, 2 merged, 1 already done, 0 delayed
[auto_scale_0 @ 00000182dba869c0] w:1280 h:720 fmt:bgr24 sar:0/1 -> w:1280 h:720 fmt:yuv420p sar:0/1 flags:0x00000004
[libx264 @ 00000182dba76080] using mv_range_thread = 24
[libx264 @ 00000182dba76080] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 BMI2 AVX2 AVX512
[libx264 @ 00000182dba76080] profile High, level 3.1, 4:2:0, 8-bit
[libx264 @ 00000182dba76080] 264 - core 164 r3107 a8b68eb - H.264/MPEG-4 AVC codec - Copyleft 2003-2023 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=22 lookahead_threads=3 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=10 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
[tcp @ 00000182dc5ce480] No default whitelist set
[tcp @ 00000182dc5ce480] Original list of addresses:
[tcp @ 00000182dc5ce480] Address 192.168.0.2 port 8554
[tcp @ 00000182dc5ce480] Interleaved list of addresses:
[tcp @ 00000182dc5ce480] Address 192.168.0.2 port 8554
[tcp @ 00000182dc5ce480] Starting connection attempt to 192.168.0.2 port 8554
[tcp @ 00000182dc5ce480] Successfully connected to 192.168.0.2 port 8554
[rtsp @ 00000182dba72d00] SDP:
v=0

o=- 0 0 IN IP4 127.0.0.1

s=No Name

c=IN IP4 192.168.0.2

t=0 0

a=tool:libavformat 60.10.100

m=video 0 RTP/AVP 96

a=rtpmap:96 H264/90000

a=fmtp:96 packetization-mode=1; sprop-parameter-sets=Z2QAH6zZQFAFuhAAAAMAEAAAAwFA8YMZYA==,aOvjyyLA; profile-level-id=64001F

a=control:streamid=0


[rtp @ 00000182dc5cd040] No default whitelist set
[udp @ 00000182dba4b140] No default whitelist set
[udp @ 00000182dba4b140] end receive buffer size reported is 393216
[udp @ 00000182dc9bf040] No default whitelist set
[udp @ 00000182dc9bf040] end receive buffer size reported is 393216
Output #0, rtsp, to 'rtsp://192.168.0.2:8554/mystream':
  Metadata:
    encoder         : Lavf60.10.100
  Stream #0:0, 0, 1/90000: Video: h264, yuv420p(tv, progressive), 1280x720, q=2-31, 10 fps, 90k tbn
    Metadata:
      encoder         : Lavc60.23.100 libx264
    Side data:
      cpb: bitrate max/min/avg: 0/0/0 buffer size: 0 vbv_delay: N/A
frame=    0 fps=0.0 q=0.0 size=       0kB time=N/A bitrate=N/A speed=N/A    
[rawvideo @ 00000182dba72700] PACKET SIZE: 2764800, STRIDE: 3840
[rawvideo @ 00000182dba72700] PACKET SIZE: 2764800, STRIDE: 3840
frame=    0 fps=0.0 q=0.0 size=       0kB time=N/A bitrate=N/A speed=N/A    
[rawvideo @ 00000182dba72700] PACKET SIZE: 2764800, STRIDE: 3840
[rawvideo @ 00000182dba72700] PACKET SIZE: 2764800, STRIDE: 3840
frame=    0 fps=0.0 q=0.0 size=       0kB time=N/A bitrate=N/A speed=N/A    
[rawvideo @ 00000182dba72700] PACKET SIZE: 2764800, STRIDE: 3840   
[rawvideo @ 00000182dba72700] PACKET SIZE: 2764800, STRIDE: 3840
[libx264 @ 00000182dba76080] frame=   0 QP=21.34 NAL=3 Slice:I Poc:0   I:3600 P:0    SKIP:0    size=135901 bytes
frame=    0 fps=0.0 q=25.0 size=       0kB time=-00:00:00.20 bitrate=  -0.0kbits/s speed=N/A    
[vost#0:0/libx264 @ 00000182dba75cc0] Error submitting a packet to the muxer: Broken pipe
[out#0/rtsp @ 00000182dba72c00] Error muxing a packet
[out#0/rtsp @ 00000182dba72c00] Terminating muxer thread
[rawvideo @ 00000182dba72700] PACKET SIZE: 2764800, STRIDE: 3840
[libx264 @ 00000182dba76080] frame=   1 QP=18.29 NAL=2 Slice:P Poc:2   I:2662 P:866  SKIP:72   size=54835 bytes
frame=    1 fps=0.0 q=25.0 size=N/A time=-00:00:00.10 bitrate=N/A speed=N/A    
No more output streams to write to, finishing.

Conversion failed!



  


• ffmpeg streaming UDP port is closed [closed]

  26 décembre 2023, par BrilliantContract

  I'm trying to use ffmpeg in order to transcode RTSP stream from CCTV to HLS stream so it could be accessed through a web server.

  


  ffmpeg used to stream video from CCTV with following command

  


  $ ffmpeg -i "rtsp://cam-1.loc:554?user=admin&password=admin&channel=1&stream=0" -hls_time 3 -hls_wrap 10 -f mpegts udp://localhost:6601
ffmpeg version 4.2.8 Copyright (c) 2000-2022 the FFmpeg developers
  built with gcc 8 (GCC)
  configuration: --prefix=/usr --bindir=/usr/bin --datadir=/usr/share/ffmpeg --docdir=/usr/share/doc/ffmpeg --incdir=/usr/include/ffmpeg --libdir=/usr/lib64 --mandir=/usr/share/man --arch=x86_64 --optflags='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection' --extra-ldflags='-Wl,-z,relro -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld ' --extra-cflags=' ' --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libvo-amrwbenc --enable-version3 --enable-bzlib --disable-crystalhd --enable-fontconfig --enable-frei0r --enable-gcrypt --enable-gnutls --enable-ladspa --enable-libaom --enable-libdav1d --enable-libass --enable-libbluray --enable-libcdio --enable-libdrm --enable-libjack --enable-libfreetype --enable-libfribidi --enable-libgsm --enable-libmp3lame --enable-nvenc --enable-openal --enable-opencl --enable-opengl --enable-libopenjpeg --enable-libopus --enable-libpulse --enable-librsvg --enable-libsrt --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libvorbis --enable-libv4l2 --enable-libvidstab --enable-libvmaf --enable-version3 --enable-vapoursynth --enable-libvpx --enable-libx264 --enable-libx265 --enable-libxvid --enable-libzimg --enable-libzvbi --enable-avfilter --enable-avresample --enable-libmodplug --enable-postproc --enable-pthreads --disable-static --enable-shared --enable-gpl --disable-debug --disable-stripping --shlibdir=/usr/lib64 --enable-libmfx --enable-runtime-cpudetect
  libavutil      56. 31.100 / 56. 31.100
  libavcodec     58. 54.100 / 58. 54.100
  libavformat    58. 29.100 / 58. 29.100
  libavdevice    58.  8.100 / 58.  8.100
  libavfilter     7. 57.100 /  7. 57.100
  libavresample   4.  0.  0 /  4.  0.  0
  libswscale      5.  5.100 /  5.  5.100
  libswresample   3.  5.100 /  3.  5.100
  libpostproc    55.  5.100 / 55.  5.100
[rtsp @ 0x5576c7340600] getaddrinfo(cam-1.loc): Name or service not known
Guessed Channel Layout for Input Stream #0.1 : mono
Input #0, rtsp, from 'rtsp://cam-1.loc:554?user=admin&password=admin&channel=1&stream=0':
  Metadata:
    title           : RTSP Session
  Duration: N/A, start: 0.000000, bitrate: N/A
    Stream #0:0: Video: h264 (Main), yuv420p(progressive), 1920x1080, 25 fps, 25 tbr, 90k tbn, 50 tbc
    Stream #0:1: Audio: pcm_alaw, 8000 Hz, mono, s16, 64 kb/s
Stream mapping:
  Stream #0:0 -> #0:0 (h264 (native) -> mpeg2video (native))
  Stream #0:1 -> #0:1 (pcm_alaw (native) -> mp2 (native))
Press [q] to stop, [?] for help
Output #0, mpegts, to 'udp://localhost:6601':
  Metadata:
    title           : RTSP Session
    encoder         : Lavf58.29.100
    Stream #0:0: Video: mpeg2video (Main), yuv420p, 1920x1080, q=2-31, 200 kb/s, 25 fps, 90k tbn, 25 tbc
    Metadata:
      encoder         : Lavc58.54.100 mpeg2video
    Side data:
      cpb: bitrate max/min/avg: 0/0/200000 buffer size: 0 vbv_delay: -1
    Stream #0:1: Audio: mp2, 16000 Hz, mono, s16, 160 kb/s
    Metadata:
      encoder         : Lavc58.54.100 mp2
[rtsp @ 0x5576c7340600] max delay reached. need to consume packette=5338.9kbits/s dup=0 drop=5 speed=1.12x    
[rtsp @ 0x5576c7340600] RTP: missed 3 packets
[rtsp @ 0x5576c7340600] max delay reached. need to consume packet
[rtsp @ 0x5576c7340600] RTP: missed 6 packets
[rtsp @ 0x5576c7340600] max delay reached. need to consume packet
[rtsp @ 0x5576c7340600] RTP: missed 6 packets
[rtsp @ 0x5576c7340600] max delay reached. need to consume packet
[rtsp @ 0x5576c7340600] RTP: missed 5 packets
[rtsp @ 0x5576c7340600] max delay reached. need to consume packet
[rtsp @ 0x5576c7340600] RTP: missed 4 packets
[rtsp @ 0x5576c7340600] max delay reached. need to consume packet
[rtsp @ 0x5576c7340600] RTP: missed 5 packets
[rtsp @ 0x5576c7340600] max delay reached. need to consume packet
[rtsp @ 0x5576c7340600] RTP: missed 6 packets
[rtsp @ 0x5576c7340600] max delay reached. need to consume packet
[rtsp @ 0x5576c7340600] RTP: missed 5 packets
[rtsp @ 0x5576c7340600] max delay reached. need to consume packet
[rtsp @ 0x5576c7340600] RTP: missed 6 packets
[h264 @ 0x5576c7993c80] concealing 972 DC, 972 AC, 972 MV errors in I frame
rtsp://cam-1.loc:554?user=admin&password=admin&channel=1&stream=0: corrupt decoded frame in stream 0=1.11x    
[rtsp @ 0x5576c7340600] max delay reached. need to consume packette=5298.4kbits/s dup=0 drop=5 speed=1.02x    
[rtsp @ 0x5576c7340600] RTP: missed 2 packets
[rtsp @ 0x5576c7340600] max delay reached. need to consume packet
[rtsp @ 0x5576c7340600] RTP: missed 5 packets
[rtsp @ 0x5576c7340600] max delay reached. need to consume packet
[rtsp @ 0x5576c7340600] RTP: missed 4 packets
[rtsp @ 0x5576c7340600] max delay reached. need to consume packet
[rtsp @ 0x5576c7340600] RTP: missed 3 packets
[rtsp @ 0x5576c7340600] max delay reached. need to consume packet
[rtsp @ 0x5576c7340600] RTP: missed 4 packets
[rtsp @ 0x5576c7340600] max delay reached. need to consume packet
[rtsp @ 0x5576c7340600] RTP: missed 5 packets
[rtsp @ 0x5576c7340600] max delay reached. need to consume packet
[rtsp @ 0x5576c7340600] RTP: missed 5 packets
[rtsp @ 0x5576c7340600] max delay reached. need to consume packet
[rtsp @ 0x5576c7340600] RTP: missed 2 packets
[h264 @ 0x5576c779b9c0] cabac decode of qscale diff failed at 66 60
[h264 @ 0x5576c779b9c0] error while decoding MB 66 60, bytestream 9825
[h264 @ 0x5576c779b9c0] concealing 943 DC, 943 AC, 943 MV errors in I frame
rtsp://cam-1.loc:554?user=admin&password=admin&channel=1&stream=0: corrupt decoded frame in stream 0=1.02x    
frame= 1315 fps= 25 q=31.0 Lsize=   34249kB time=00:00:53.32 bitrate=5261.8kbits/s dup=0 drop=5 speed=1.02x    
video:30544kB audio:1042kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 8.431973%


  


  nmap used to check if 6601 port is open

  


  $ nmap -Pn localhost -p 6601
Starting Nmap 7.70 ( https://nmap.org ) at 2023-12-26 10:47 UTC
Nmap scan report for localhost (127.0.0.1)
Host is up (0.0011s latency).
Other addresses for localhost (not scanned): ::1

PORT     STATE  SERVICE
6601/tcp closed mstmg-sstp

Nmap done: 1 IP address (1 host up) scanned in 0.06 seconds


  


  However, ffplayer able to play video stream

  


  ffplay udp://localhost:6601
ffplay version 4.2.8 Copyright (c) 2003-2022 the FFmpeg developers
  built with gcc 8 (GCC)
  configuration: --prefix=/usr --bindir=/usr/bin --datadir=/usr/share/ffmpeg --docdir=/usr/share/doc/ffmpeg --incdir=/usr/include/ffmpeg --libdir=/usr/lib64 --mandir=/usr/share/man --arch=x86_64 --optflags='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection' --extra-ldflags='-Wl,-z,relro -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld ' --extra-cflags=' ' --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libvo-amrwbenc --enable-version3 --enable-bzlib --disable-crystalhd --enable-fontconfig --enable-frei0r --enable-gcrypt --enable-gnutls --enable-ladspa --enable-libaom --enable-libdav1d --enable-libass --enable-libbluray --enable-libcdio --enable-libdrm --enable-libjack --enable-libfreetype --enable-libfribidi --enable-libgsm --enable-libmp3lame --enable-nvenc --enable-openal --enable-opencl --enable-opengl --enable-libopenjpeg --enable-libopus --enable-libpulse --enable-librsvg --enable-libsrt --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libvorbis --enable-libv4l2 --enable-libvidstab --enable-libvmaf --enable-version3 --enable-vapoursynth --enable-libvpx --enable-libx264 --enable-libx265 --enable-libxvid --enable-libzimg --enable-libzvbi --enable-avfilter --enable-avresample --enable-libmodplug --enable-postproc --enable-pthreads --disable-static --enable-shared --enable-gpl --disable-debug --disable-stripping --shlibdir=/usr/lib64 --enable-libmfx --enable-runtime-cpudetect
  libavutil      56. 31.100 / 56. 31.100
  libavcodec     58. 54.100 / 58. 54.100
  libavformat    58. 29.100 / 58. 29.100
  libavdevice    58.  8.100 / 58.  8.100
  libavfilter     7. 57.100 /  7. 57.100
  libavresample   4.  0.  0 /  4.  0.  0
  libswscale      5.  5.100 /  5.  5.100
  libswresample   3.  5.100 /  3.  5.100
  libpostproc    55.  5.100 / 55.  5.100
[mpeg2video @ 0x7f1ad854afc0] Invalid frame dimensions 0x0. f=0/0   
    Last message repeated 7 times
Input #0, mpegts, from 'udp://localhost:6601':0KB sq=    0B f=0/0   
  Duration: N/A, start: 59.288000, bitrate: N/A
  Program 1 
    Metadata:
      service_name    : RTSP Session
      service_provider: FFmpeg
    Stream #0:0[0x100]: Video: mpeg2video (Main) ([2][0][0][0] / 0x0002), yuv420p(tv, progressive), 1920x1080 [SAR 1:1 DAR 16:9], 25 fps, 25 tbr, 90k tbn, 50 tbc
    Stream #0:1[0x101]: Audio: mp2 ([4][0][0][0] / 0x0004), 16000 Hz, mono, s16p, 160 kb/s


  


  VLC cannot play the video stream :

  


  vlc udp://localhost:6601
VLC media player 3.0.18 Vetinari (revision )
[000055769aa81ba0] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface.
Warning: Ignoring XDG_SESSION_TYPE=wayland on Gnome. Use QT_QPA_PLATFORM=wayland to run on Wayland anyway.
[00007fec64011e90] mjpeg demux error: cannot peek


  


  ffprobe output

  


  ffprobe udp://localhost:6601
ffprobe version 4.2.8 Copyright (c) 2007-2022 the FFmpeg developers
  built with gcc 8 (GCC)
  configuration: --prefix=/usr --bindir=/usr/bin --datadir=/usr/share/ffmpeg --docdir=/usr/share/doc/ffmpeg --incdir=/usr/include/ffmpeg --libdir=/usr/lib64 --mandir=/usr/share/man --arch=x86_64 --optflags='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection' --extra-ldflags='-Wl,-z,relro -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld ' --extra-cflags=' ' --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libvo-amrwbenc --enable-version3 --enable-bzlib --disable-crystalhd --enable-fontconfig --enable-frei0r --enable-gcrypt --enable-gnutls --enable-ladspa --enable-libaom --enable-libdav1d --enable-libass --enable-libbluray --enable-libcdio --enable-libdrm --enable-libjack --enable-libfreetype --enable-libfribidi --enable-libgsm --enable-libmp3lame --enable-nvenc --enable-openal --enable-opencl --enable-opengl --enable-libopenjpeg --enable-libopus --enable-libpulse --enable-librsvg --enable-libsrt --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libvorbis --enable-libv4l2 --enable-libvidstab --enable-libvmaf --enable-version3 --enable-vapoursynth --enable-libvpx --enable-libx264 --enable-libx265 --enable-libxvid --enable-libzimg --enable-libzvbi --enable-avfilter --enable-avresample --enable-libmodplug --enable-postproc --enable-pthreads --disable-static --enable-shared --enable-gpl --disable-debug --disable-stripping --shlibdir=/usr/lib64 --enable-libmfx --enable-runtime-cpudetect
  libavutil      56. 31.100 / 56. 31.100
  libavcodec     58. 54.100 / 58. 54.100
  libavformat    58. 29.100 / 58. 29.100
  libavdevice    58.  8.100 / 58.  8.100
  libavfilter     7. 57.100 /  7. 57.100
  libavresample   4.  0.  0 /  4.  0.  0
  libswscale      5.  5.100 /  5.  5.100
  libswresample   3.  5.100 /  3.  5.100
  libpostproc    55.  5.100 / 55.  5.100
[mpeg2video @ 0x55e1be0910c0] Invalid frame dimensions 0x0.
    Last message repeated 9 times
Input #0, mpegts, from 'udp://localhost:6601':
  Duration: N/A, start: 262.760000, bitrate: N/A
  Program 1 
    Metadata:
      service_name    : RTSP Session
      service_provider: FFmpeg
    Stream #0:0[0x100]: Video: mpeg2video (Main) ([2][0][0][0] / 0x0002), yuv420p(tv, progressive), 1920x1080 [SAR 1:1 DAR 16:9], 25 fps, 25 tbr, 90k tbn, 50 tbc
    Stream #0:1[0x101]: Audio: mp2 ([4][0][0][0] / 0x0004), 16000 Hz, mono, s16p, 160 kb/s


  


  Why the video stream is not playing in VLC ?

  


  Why nmap do not see that UPD port is open ?

  


• Homepage Design : Best Practices & Examples

  5 octobre 2022, par Erin

  Did you know users spend about 50 milliseconds deciding if they like your website’s homepage design or not ?

  With billions of websites and scrolling often done on the go, you have to make a strong first impression because the chances for a once-over are slim. 

  Learn how to design magnetically-appealing website homepages from this guide. 

  What is a homepage in web design ?

  Homepage is the front page of your website — a destination where users land when typing your website URL address. It’s located at the root of the website’s domain (e.g., matomo.org) or a subdomain (e.g., university.webflow.com).

  Design-wise a homepage has two goals :

  • Explain the purpose of the website and present overview information 
  • Provide top-level navigation to lower-level web pages (e.g., blog, sales pages, etc.) 

  Separately, a homepage is also the place where users will return each time they’ll feel stuck and want to start anew. Thus, your homepage website design should provide obvious navigation paths to other website areas.

  6 Must-Know Website Homepage Design Best Practices

  Behind every winning homepage design stands a detailed customer journey map. 

  A customer journey is a schematic representation of how site visitors will move around your website to accomplish various goals. 

  A good customer journey map lists different actions a user will take after landing on your website (e.g., browse product pages, save items to a wishlist, register an account, etc.) — and it does so for different audience segments. 

  

  Your homepage design should help users move from the first step on their journey (e.g., learning about your website) to the final one (e.g., converting to a paid customer). At the same time, your homepage should serve the needs of both new and returning visitors — prospects who may be at a different stage of their journey (e.g., consideration). 

  With the above in mind, let’s take a look at several website homepage design ideas and the reasons why they work. 

  1. Use Familiar Design Elements

  Whether you’re designing a new website or refreshing an old one, it’s always tempting to go “out of the box” — use horizontal scrolling, skip header navigation or include arty animations. 

  Bold design choices work for some brands, mainly those who aren’t using their website as a primary sales channel (e.g., luxury brands). 

  But unfamiliar design patterns can also intimidate a lot of shoppers. In one observational study, people were asked to guess where specific content (e.g., information on international calls) would be placed on a telecom website. 75% of users picked the same location. This means two things :

  • People already have expectations of where specific website information is typically placed 
  • Yet, one in four users struggles to identify the right areas even within standard website layouts

  So why make the job harder for them ? As UX consultant Peter Ramsey rightfully notes : 

  The truth is : designing the best experience isn’t about being unique, it’s about being easy. And guess what feels really easy to use ? Things that feel familiar.

  Therefore, analyse other homepage layout designs in your industry. Pay attention to the number and type of homepage screens and approaches to designing header/footer navigation. 

  Take some of those ideas as your “base”. Then make your homepage design on-brand with unique typography, icons, visuals and other graphic design elements.

  Take a cue from ICAM — a steel manufacturing company. Their niche isn’t typically exciting. Yet, their homepage design stops you in your tracks and tinkers your curiosity to discover more (even if you aren’t shopping for metalware). 

  

  The interesting part is that ICAM uses a rather standard homepage layout. You have a hero image in the first screen, followed by a multi-column layout of their industry expertise and an overview of manufacturers. 

  But this homepage design feels fresh because the company uses plenty of white space, bold typography and vibrant visuals. Also, they delay the creative twist (horizontal scrolling area) to the bottom of the homepage, meaning that it’s less likely to intimidate less confident web users. 

  2. Decide On The Optimal Homepage Layout 

  In web design, a homepage layout is your approach to visually organising different information on the screen. 

  Observant folks will notice that good homepage designs often have the same layout. For example, include a split-view “hero” screen with a call to action on the left and visuals (photo or video) on the left. 

  

  The reason for using similar layouts for website homepage design isn’t a lack of creativity. On the contrary, some layouts have become the “best practice” because they :

  • Offer a great user experience (UX) and don’t confuse first-time visitors 
  • Feel familiar and create a pleasurable sense of deja-vu among users 
  • Have proven to drive higher conversion rates through benchmarks and tests 

  Popular types of website homepage layouts : 

  • Single column – a classic option of presenting main content in a single, vertical column. Good choice for blogs, personal websites and simple corporate sites. 
  • Split screen layout divides the page in two equal areas with different information present. Works best for Ecommerce homepages (e.g., to separate different types of garments) or SaaS websites, offering two product types (e.g., a free personal product version and a business edition). 
  • Asymmetrical layout assumes dividing your homepage into areas of different size and styles. Asymmetry helps create specific focal points for users to draw their attention to the most prominent information. 
  • Grid of cards layout helps present a lot of information in a more digestible manner by breaking down bigger bulks of text into smaller cards — a graphic element, featuring an image and some texts. By tapping a card, users can then access extra content. 
  • Boxes are visually similar to cards, but can be of varying shape. For example, you can have a bigger header-width box area, followed by four smaller boxes within it. Both of these website layouts work well for Ecommerce. 
  • Featured image layout gives visuals (photos and videos) the most prominent placement on the homepage, with texts and other graphic design elements serving a secondary purpose. 
  • F-pattern layout is based on the standard eye movement most people have when reading content on the website. Eye tracking studies found that we usually pay the most attention to information atop of the page (header area), then scan horizontally before dripping down to the next vertical line until we find content that captures our attention. 

  User behaviour analytics (UBA) tools are the best way to determine what type of layout will work for your homepage. 

  For example, you can use Matomo Heatmaps and Session Recording to observe how users navigate your homepage, which areas or links they click and what blockers they face during navigation.

  

  Matomo can capture accurate behavioural insights because we track relative positions to elements within your websites. This approach allows us to provide accurate data for users with different browsers, operating systems, zoom-in levels and fonts. 

  The best part ? You can collect behavioural data from up to 100 different user segments to understand how different audience cohorts engage with your product.

  3. Include a One-Sentence Tagline

  A tagline is a one-line summary of what your company does and what its unique sales proposition (USP) is. It should be short, catchy and distinguish you from competitors.

  A modern homepage design practice is to include a call to action in the first screen. Why ? Because you then instantly communicate or remind of your value proposition to every user — and provide them with an easy way to convert whenever they are ready to do business with you. 

  Here’s how three companies with a similar product, a project management app, differentiate themselves through homepage taglines. 

  Monday.com positions itself as an operating system (OS) for work. 

  

  Basecamp emphasises its product simplicity and openly says that they are different from other overly-complex software. 

  

  Asana, in turn, addresses a familiar user pain point (siloed communication) that it attempts to fix with its product. 

  

  Coming up with the perfect homepage tagline is a big task. You may have plenty of ideas, but little confidence in what version will stick. 

  The best approach ? Let a series of A/B tests decide. You can test a roaster of homepage slogans on a rotating bi-weekly/monthly schedule and track how copy changes affect conversion rates. 

  With Matomo A/B test feature, you can create, track and manage all experiments straight from your web analytics app — and get consolidated reports on total page visitors and conversion rates per each tested variation. 

  

  Beyond slogans, you can also run A/B tests to validate submission form placements, button texts or the entire page layout. 

  For instance, you can benchmark how your new homepage design performs compared to the old version with a subset of users before making it publicly available. 

  4. Highlight The Main Tasks For The User

  Though casual browsing is a thing, most of us head to specific websites with a clear agenda — find information, compare prices, obtain services, etc. 

  Thus, your homepage should provide clear starting points for users’ main tasks (those you’ve also identified as conversion goals on your customer journey maps !).

  These tasks can include : 

  • Account registration 
  • Product demo request 
  • Newsletter sign-up 

  The best website homepage designs organically guide users through a set number of common tasks, one screen at a time. 

  Let’s analyse Sable homepage design. The company offers a no-fee bank account and a credit card product for soon-to-be US transplants. The main task a user has : Decide if they want to try Sable and hopefully open an account with them. 

  

  This mono-purpose page focuses on persuading a prospect that Sable is right for them. 

  The first screen hosts the main CTA with an animated drop-down arrow to keep scrolling. This is likely aimed at first-time visitors that just landed on the page from an online ad or social media post. 

  The second screen serves the main pitch — no-fee, no-hassle access to a US banking account that also helps you build your credit score. 

  The third screen encourages users to learn more about Sable Credit — the flagship product. For the sceptics, the fourth screen offers several more reasons to sign up for the credit product. 

  Then Sable moves on to pitching its second offering — a no-fee debit card with a cashback. Once again, the follow-up screen sweetens the deal by bringing up other perks (higher cashback for popular services like Amazon) and overcoming objections (no SSN required and multi-language support available). 

  The sequence ends with side-by-side product comparison and some extra social proof. 

  In Sable’s case, each homepage screen has a clear purpose and is designed to facilitate one specific user action — account opening. 

  For multi-product companies, the above strategy works great for designing individual landing pages. 

  5. Design Proper Navigation Paths

  All websites have two areas reserved for navigation : 

  • Header menu 
  • Footer menu 

  Designing an effective header menu is more important since it’s the primary tool visitors will use to discover other pages. 

  Your header menu can be :

  • Sticky — always visible as the person keeps scrolling. 
  • Static — e.g., a hidden drop-down menu. 

  If you go for a static header and have a longer homepage layout (e.g., 5+ screens), you also need to add extra navigation elements somewhere mid-page. Or else users might not figure out where to go next and merely bounce off. 

  You can do this by : 

  • Promoting other areas of your website (e.g., sub-category pages) by linking out to them 
  • Adding a carousel of “recent posts”, “recommended reads” and “latest products” 
  • Using buttons and CTAs to direct users towards specific actions (e.g., account registration) or assets (free eBook)

  For instance, cosmetics brand Typology doesn’t have a sticky header on the homepage. Instead, they prompt discovery by promoting different product categories (best sellers, bundles, latest arrivals) and their free skin diagnostic quiz — a great engagement mechanism to retain first time users.

  

  Once the user scrolls down to the bottom of the page, they should have an extra set of navigational options — aka footer links. 

  Again, these help steer the visitor towards discovering more content without scrolling back up to the top of your homepage. 

  Nielsen Norman Group says that people mostly use footers as :

  • A second chance to be convinced — after reading the entire homepage, the user is ready to give your product a go.
    
  • The last resort for hard-to-find content that’s not displayed in global header navigation (e.g., Terms and Conditions or shipping information pages).

  As a rule of thumb, you should designate the following information to the footer : 

  • Utility links (Contact page, Terms & Conditions, Privacy Policy, etc.) 
  • Secondary-task links (e.g., Career page, Investor Details, Media contacts, etc.) 
  • Brands within the organisation (if you operate several) 
  • Customer engagement link (email newsletters and social media buttons)

  The key is to keep the area compact — not more than one standard user screen resolution of 1280×720. 

  6. Show Users What’s Clickable (Or Not) 

  A homepage invites your site visitors on a journey. But if they don’t know which elements to click, they aren’t going to get anywhere.

  Good homepage design makes it obvious which page elements are clickable, i.e., can take the user to a new page or another segment of the homepage. 

  Here are several must-know homepage design tips for better on-page navigation : 

  • Use colour and underline or bold to highlight clickable words. Alternatively, you can change the browser cursor from a standard arrow into another element (e.g., a larger dot or a pointy finger) to indicate when the cursor hovers over a clickable website area. 
  • Make descriptive button texts that imply what will happen when a user clicks the page. Instead of using abstract and generic button texts like “see more” or “learn more”, try a more vibrant language like “dive in” for clicking through to a spa page. 
  • Use a unified hover area to show how different homepage design elements represent a single path or multiple navigation paths. When multiple items are encapsulated in one visual element (e.g., a box), users may be reluctant to click the image because they aren’t sure if it’s one large hit area leading to a single page or if there are multiple hit areas, leading to different pages. 

  Homepage of BEAUSiTE — a whimsical hotel in the Swiss Alps – embodies all of the above design principles. They change the cursor style whenever you scroll into a hit area, use emotive and creative micro-copy for all button texts and clearly distinguish between different homepage elements.

  

  How to Make Your Homepage Design Even More Impactful ? 

  Website homepage design is roughly 20% of pure design work and 80% of behind-the-scenes research. 

  To design a high-performing homepage you need to have data-backed answers to the following questions : 

  • Who are your primary and secondary target audiences ? 
  • Which tasks (1 to 4) you’d want to help them solve through your homepage ?

  You can get the answers to both questions from your web analytics data by using audience segmentation and page transition (behaviour flow) reports in Matomo. 

  Based on these, you can determine common user journeys and tasks people look to accomplish when visiting your website. Next, you can collect even more data with UBA tools  like heatmaps and user session recordings. Then translated the observed patterns into working homepage design ideas. 

  Improve your homepage design and conversion rates with Matomo. Start your free 21-day trial now ! 

  21 day free trial. No credit card required.

  Your email address
  

  Your website address
  

  Your Analytics subdomain will be .matomo.cloud (