Recherche avancée
Autres articles (57)
-
Participer à sa traduction
10 avril 2011Vous pouvez nous aider à améliorer les locutions utilisées dans le logiciel ou à traduire celui-ci dans n’importe qu’elle nouvelle langue permettant sa diffusion à de nouvelles communautés linguistiques.
Pour ce faire, on utilise l’interface de traduction de SPIP où l’ensemble des modules de langue de MediaSPIP sont à disposition. ll vous suffit de vous inscrire sur la liste de discussion des traducteurs pour demander plus d’informations.
Actuellement MediaSPIP n’est disponible qu’en français et (...) -
Les autorisations surchargées par les plugins
27 avril 2010, parMediaspip core
autoriser_auteur_modifier() afin que les visiteurs soient capables de modifier leurs informations sur la page d’auteurs -
Publier sur MédiaSpip
13 juin 2013Puis-je poster des contenus à partir d’une tablette Ipad ?
Oui, si votre Médiaspip installé est à la version 0.2 ou supérieure. Contacter au besoin l’administrateur de votre MédiaSpip pour le savoir
Sur d’autres sites (12220)
-
How to encode using the FFMpeg in Android (using H263)
3 juillet 2012, par Kenny910I am trying to follow the sample code on encoding in the ffmpeg document and successfully build a application to encode and generate a mp4 file but I face the following problems :
1) I am using the H263 for encoding but I can only set the width and height of the AVCodecContext to 176x144, for other case (like 720x480 or 640x480) it will return fail.
2) I can't play the output mp4 file by using the default Android player, isn't it support H263 mp4 file ? p.s. I can play it by using other player
3) Is there any sample code on encoding other video frame to make a new video (which mean decode the video and encode it back in different quality setting, also i would like to modify the frame content) ?
Here is my code, thanks !
JNIEXPORT jint JNICALL Java_com_ffmpeg_encoder_FFEncoder_nativeEncoder(JNIEnv* env, jobject thiz, jstring filename){
LOGI("nativeEncoder()");
avcodec_register_all();
avcodec_init();
av_register_all();
AVCodec *codec;
AVCodecContext *codecCtx;
int i;
int out_size;
int size;
int x;
int y;
int output_buffer_size;
FILE *file;
AVFrame *picture;
uint8_t *output_buffer;
uint8_t *picture_buffer;
/* Manual Variables */
int l;
int fps = 30;
int videoLength = 5;
/* find the H263 video encoder */
codec = avcodec_find_encoder(CODEC_ID_H263);
if (!codec) {
LOGI("avcodec_find_encoder() run fail.");
}
codecCtx = avcodec_alloc_context();
picture = avcodec_alloc_frame();
/* put sample parameters */
codecCtx->bit_rate = 400000;
/* resolution must be a multiple of two */
codecCtx->width = 176;
codecCtx->height = 144;
/* frames per second */
codecCtx->time_base = (AVRational){1,fps};
codecCtx->pix_fmt = PIX_FMT_YUV420P;
codecCtx->codec_id = CODEC_ID_H263;
codecCtx->codec_type = AVMEDIA_TYPE_VIDEO;
/* open it */
if (avcodec_open(codecCtx, codec) < 0) {
LOGI("avcodec_open() run fail.");
}
const char* mfileName = (*env)->GetStringUTFChars(env, filename, 0);
file = fopen(mfileName, "wb");
if (!file) {
LOGI("fopen() run fail.");
}
(*env)->ReleaseStringUTFChars(env, filename, mfileName);
/* alloc image and output buffer */
output_buffer_size = 100000;
output_buffer = malloc(output_buffer_size);
size = codecCtx->width * codecCtx->height;
picture_buffer = malloc((size * 3) / 2); /* size for YUV 420 */
picture->data[0] = picture_buffer;
picture->data[1] = picture->data[0] + size;
picture->data[2] = picture->data[1] + size / 4;
picture->linesize[0] = codecCtx->width;
picture->linesize[1] = codecCtx->width / 2;
picture->linesize[2] = codecCtx->width / 2;
for(l=0;l/encode 1 second of video
for(i=0;i/prepare a dummy image YCbCr
//Y
for(y=0;yheight;y++) {
for(x=0;xwidth;x++) {
picture->data[0][y * picture->linesize[0] + x] = x + y + i * 3;
}
}
//Cb and Cr
for(y=0;yheight/2;y++) {
for(x=0;xwidth/2;x++) {
picture->data[1][y * picture->linesize[1] + x] = 128 + y + i * 2;
picture->data[2][y * picture->linesize[2] + x] = 64 + x + i * 5;
}
}
//encode the image
out_size = avcodec_encode_video(codecCtx, output_buffer, output_buffer_size, picture);
fwrite(output_buffer, 1, out_size, file);
}
//get the delayed frames
for(; out_size; i++) {
out_size = avcodec_encode_video(codecCtx, output_buffer, output_buffer_size, NULL);
fwrite(output_buffer, 1, out_size, file);
}
}
//add sequence end code to have a real mpeg file
output_buffer[0] = 0x00;
output_buffer[1] = 0x00;
output_buffer[2] = 0x01;
output_buffer[3] = 0xb7;
fwrite(output_buffer, 1, 4, file);
fclose(file);
free(picture_buffer);
free(output_buffer);
avcodec_close(codecCtx);
av_free(codecCtx);
av_free(picture);
LOGI("finish");
return 0; } -
how to extract audio from video using ffmpeg c++
28 juin 2016, par daenerysI am trying to write c++ code on how to extract audio from mp4 format file. I have compiled the examples in ffmpeg library and tried to run the demuxing_decoding.c file. The problem is that on running the code, it starts to decode way more than the actual file size and decodes wrong codec format (the decoded files cant be run).
here is the demuxing_decoding.c that I am trying to run :
#include
#include <libavutil></libavutil>opt.h>
#include <libavcodec></libavcodec>avcodec.h>
#include <libavutil></libavutil>channel_layout.h>
#include <libavutil></libavutil>common.h>
#include <libavutil></libavutil>imgutils.h>
#include <libavutil></libavutil>mathematics.h>
#include <libavutil></libavutil>samplefmt.h>
#define INBUF_SIZE 4096
#define AUDIO_INBUF_SIZE 20480
#define AUDIO_REFILL_THRESH 4096
/* check that a given sample format is supported by the encoder */
static int check_sample_fmt(AVCodec *codec, enum AVSampleFormat sample_fmt)
{
const enum AVSampleFormat *p = codec->sample_fmts;
while (*p != AV_SAMPLE_FMT_NONE) {
if (*p == sample_fmt)
return 1;
p++;
}
return 0;
}
/* just pick the highest supported samplerate */
static int select_sample_rate(AVCodec *codec)
{
const int *p;
int best_samplerate = 0;
if (!codec->supported_samplerates)
return 44100;
p = codec->supported_samplerates;
while (*p) {
best_samplerate = FFMAX(*p, best_samplerate);
p++;
}
return best_samplerate;
}
/* select layout with the highest channel count */
static int select_channel_layout(AVCodec *codec)
{
const uint64_t *p;
uint64_t best_ch_layout = 0;
int best_nb_channels = 0;
if (!codec->channel_layouts)
return AV_CH_LAYOUT_STEREO;
p = codec->channel_layouts;
while (*p) {
int nb_channels = av_get_channel_layout_nb_channels(*p);
if (nb_channels > best_nb_channels) {
best_ch_layout = *p;
best_nb_channels = nb_channels;
}
p++;
}
return best_ch_layout;
}
/*
* Audio encoding example
*/
static void audio_encode_example(const char *filename)
{
AVCodec *codec;
AVCodecContext *c= NULL;
AVFrame *frame;
AVPacket pkt;
int i, j, k, ret, got_output;
int buffer_size;
FILE *f;
uint16_t *samples;
float t, tincr;
printf("Encode audio file %s\n", filename);
/* find the MP2 encoder */
codec = avcodec_find_encoder(AV_CODEC_ID_MP2);
if (!codec) {
fprintf(stderr, "Codec not found\n");
exit(1);
}
c = avcodec_alloc_context3(codec);
if (!c) {
fprintf(stderr, "Could not allocate audio codec context\n");
exit(1);
}
/* put sample parameters */
c->bit_rate = 64000;
/* check that the encoder supports s16 pcm input */
c->sample_fmt = AV_SAMPLE_FMT_S16;
if (!check_sample_fmt(codec, c->sample_fmt)) {
fprintf(stderr, "Encoder does not support sample format %s",
av_get_sample_fmt_name(c->sample_fmt));
exit(1);
}
/* select other audio parameters supported by the encoder */
c->sample_rate = select_sample_rate(codec);
c->channel_layout = select_channel_layout(codec);
c->channels = av_get_channel_layout_nb_channels(c->channel_layout);
/* open it */
if (avcodec_open2(c, codec, NULL) < 0) {
fprintf(stderr, "Could not open codec\n");
exit(1);
}
f = fopen(filename, "wb");
if (!f) {
fprintf(stderr, "Could not open %s\n", filename);
exit(1);
}
/* frame containing input raw audio */
frame = av_frame_alloc();
if (!frame) {
fprintf(stderr, "Could not allocate audio frame\n");
exit(1);
}
frame->nb_samples = c->frame_size;
frame->format = c->sample_fmt;
frame->channel_layout = c->channel_layout;
/* the codec gives us the frame size, in samples,
* we calculate the size of the samples buffer in bytes */
buffer_size = av_samples_get_buffer_size(NULL, c->channels, c->frame_size,
c->sample_fmt, 0);
if (buffer_size < 0) {
fprintf(stderr, "Could not get sample buffer size\n");
exit(1);
}
samples = av_malloc(buffer_size);
if (!samples) {
fprintf(stderr, "Could not allocate %d bytes for samples buffer\n",
buffer_size);
exit(1);
}
/* setup the data pointers in the AVFrame */
ret = avcodec_fill_audio_frame(frame, c->channels, c->sample_fmt,
(const uint8_t*)samples, buffer_size, 0);
if (ret < 0) {
fprintf(stderr, "Could not setup audio frame\n");
exit(1);
}
/* encode a single tone sound */
t = 0;
tincr = 2 * M_PI * 440.0 / c->sample_rate;
for (i = 0; i < 200; i++) {
av_init_packet(&pkt);
pkt.data = NULL; // packet data will be allocated by the encoder
pkt.size = 0;
for (j = 0; j < c->frame_size; j++) {
samples[2*j] = (int)(sin(t) * 10000);
for (k = 1; k < c->channels; k++)
samples[2*j + k] = samples[2*j];
t += tincr;
}
/* encode the samples */
ret = avcodec_encode_audio2(c, &pkt, frame, &got_output);
if (ret < 0) {
fprintf(stderr, "Error encoding audio frame\n");
exit(1);
}
if (got_output) {
fwrite(pkt.data, 1, pkt.size, f);
av_free_packet(&pkt);
}
}
/* get the delayed frames */
for (got_output = 1; got_output; i++) {
ret = avcodec_encode_audio2(c, &pkt, NULL, &got_output);
if (ret < 0) {
fprintf(stderr, "Error encoding frame\n");
exit(1);
}
if (got_output) {
fwrite(pkt.data, 1, pkt.size, f);
av_free_packet(&pkt);
}
}
fclose(f);
av_freep(&samples);
av_frame_free(&frame);
avcodec_close(c);
av_free(c);
}
/*
* Audio decoding.
*/
static void audio_decode_example(const char *outfilename, const char *filename)
{
AVCodec *codec;
AVCodecContext *c= NULL;
int len;
FILE *f, *outfile;
uint8_t inbuf[AUDIO_INBUF_SIZE + AV_INPUT_BUFFER_PADDING_SIZE];
AVPacket avpkt;
AVFrame *decoded_frame = NULL;
av_init_packet(&avpkt);
printf("Decode audio file %s to %s\n", filename, outfilename);
/* find the mpeg audio decoder */
codec = avcodec_find_decoder(AV_CODEC_ID_MP2);
if (!codec) {
fprintf(stderr, "Codec not found\n");
exit(1);
}
c = avcodec_alloc_context3(codec);
if (!c) {
fprintf(stderr, "Could not allocate audio codec context\n");
exit(1);
}
/* open it */
if (avcodec_open2(c, codec, NULL) < 0) {
fprintf(stderr, "Could not open codec\n");
exit(1);
}
f = fopen(filename, "rb");
if (!f) {
fprintf(stderr, "Could not open %s\n", filename);
exit(1);
}
outfile = fopen(outfilename, "wb");
if (!outfile) {
av_free(c);
exit(1);
}
/* decode until eof */
avpkt.data = inbuf;
avpkt.size = fread(inbuf, 1, AUDIO_INBUF_SIZE, f);
while (avpkt.size > 0) {
int i, ch;
int got_frame = 0;
if (!decoded_frame) {
if (!(decoded_frame = av_frame_alloc())) {
fprintf(stderr, "Could not allocate audio frame\n");
exit(1);
}
}
len = avcodec_decode_audio4(c, decoded_frame, &got_frame, &avpkt);
if (len < 0) {
fprintf(stderr, "Error while decoding\n");
exit(1);
}
if (got_frame) {
/* if a frame has been decoded, output it */
int data_size = av_get_bytes_per_sample(c->sample_fmt);
if (data_size < 0) {
/* This should not occur, checking just for paranoia */
fprintf(stderr, "Failed to calculate data size\n");
exit(1);
}
for (i=0; inb_samples; i++)
for (ch=0; chchannels; ch++)
fwrite(decoded_frame->data[ch] + data_size*i, 1, data_size, outfile);
}
avpkt.size -= len;
avpkt.data += len;
avpkt.dts =
avpkt.pts = AV_NOPTS_VALUE;
if (avpkt.size < AUDIO_REFILL_THRESH) {
/* Refill the input buffer, to avoid trying to decode
* incomplete frames. Instead of this, one could also use
* a parser, or use a proper container format through
* libavformat. */
memmove(inbuf, avpkt.data, avpkt.size);
avpkt.data = inbuf;
len = fread(avpkt.data + avpkt.size, 1,
AUDIO_INBUF_SIZE - avpkt.size, f);
if (len > 0)
avpkt.size += len;
}
}
fclose(outfile);
fclose(f);
avcodec_close(c);
av_free(c);
av_frame_free(&decoded_frame);
}
/*
* Video encoding example
*/
static void video_encode_example(const char *filename, int codec_id)
{
AVCodec *codec;
AVCodecContext *c= NULL;
int i, ret, x, y, got_output;
FILE *f;
AVFrame *frame;
AVPacket pkt;
uint8_t endcode[] = { 0, 0, 1, 0xb7 };
printf("Encode video file %s\n", filename);
/* find the mpeg1 video encoder */
codec = avcodec_find_encoder(codec_id);
if (!codec) {
fprintf(stderr, "Codec not found\n");
exit(1);
}
c = avcodec_alloc_context3(codec);
if (!c) {
fprintf(stderr, "Could not allocate video codec context\n");
exit(1);
}
/* put sample parameters */
c->bit_rate = 400000;
/* resolution must be a multiple of two */
c->width = 352;
c->height = 288;
/* frames per second */
c->time_base = (AVRational){1,25};
/* emit one intra frame every ten frames
* check frame pict_type before passing frame
* to encoder, if frame->pict_type is AV_PICTURE_TYPE_I
* then gop_size is ignored and the output of encoder
* will always be I frame irrespective to gop_size
*/
c->gop_size = 10;
c->max_b_frames = 1;
c->pix_fmt = AV_PIX_FMT_YUV420P;
if (codec_id == AV_CODEC_ID_H264)
av_opt_set(c->priv_data, "preset", "slow", 0);
/* open it */
if (avcodec_open2(c, codec, NULL) < 0) {
fprintf(stderr, "Could not open codec\n");
exit(1);
}
f = fopen(filename, "wb");
if (!f) {
fprintf(stderr, "Could not open %s\n", filename);
exit(1);
}
frame = av_frame_alloc();
if (!frame) {
fprintf(stderr, "Could not allocate video frame\n");
exit(1);
}
frame->format = c->pix_fmt;
frame->width = c->width;
frame->height = c->height;
/* the image can be allocated by any means and av_image_alloc() is
* just the most convenient way if av_malloc() is to be used */
ret = av_image_alloc(frame->data, frame->linesize, c->width, c->height,
c->pix_fmt, 32);
if (ret < 0) {
fprintf(stderr, "Could not allocate raw picture buffer\n");
exit(1);
}
/* encode 1 second of video */
for (i = 0; i < 25; i++) {
av_init_packet(&pkt);
pkt.data = NULL; // packet data will be allocated by the encoder
pkt.size = 0;
fflush(stdout);
/* prepare a dummy image */
/* Y */
for (y = 0; y < c->height; y++) {
for (x = 0; x < c->width; x++) {
frame->data[0][y * frame->linesize[0] + x] = x + y + i * 3;
}
}
/* Cb and Cr */
for (y = 0; y < c->height/2; y++) {
for (x = 0; x < c->width/2; x++) {
frame->data[1][y * frame->linesize[1] + x] = 128 + y + i * 2;
frame->data[2][y * frame->linesize[2] + x] = 64 + x + i * 5;
}
}
frame->pts = i;
/* encode the image */
ret = avcodec_encode_video2(c, &pkt, frame, &got_output);
if (ret < 0) {
fprintf(stderr, "Error encoding frame\n");
exit(1);
}
if (got_output) {
printf("Write frame %3d (size=%5d)\n", i, pkt.size);
fwrite(pkt.data, 1, pkt.size, f);
av_free_packet(&pkt);
}
}
/* get the delayed frames */
for (got_output = 1; got_output; i++) {
fflush(stdout);
ret = avcodec_encode_video2(c, &pkt, NULL, &got_output);
if (ret < 0) {
fprintf(stderr, "Error encoding frame\n");
exit(1);
}
if (got_output) {
printf("Write frame %3d (size=%5d)\n", i, pkt.size);
fwrite(pkt.data, 1, pkt.size, f);
av_free_packet(&pkt);
}
}
/* add sequence end code to have a real mpeg file */
fwrite(endcode, 1, sizeof(endcode), f);
fclose(f);
avcodec_close(c);
av_free(c);
av_freep(&frame->data[0]);
av_frame_free(&frame);
printf("\n");
}
/*
* Video decoding example
*/
static void pgm_save(unsigned char *buf, int wrap, int xsize, int ysize,
char *filename)
{
FILE *f;
int i;
f = fopen(filename,"w");
fprintf(f, "P5\n%d %d\n%d\n", xsize, ysize, 255);
for (i = 0; i < ysize; i++)
fwrite(buf + i * wrap, 1, xsize, f);
fclose(f);
}
static int decode_write_frame(const char *outfilename, AVCodecContext *avctx,
AVFrame *frame, int *frame_count, AVPacket *pkt, int last)
{
int len, got_frame;
char buf[1024];
len = avcodec_decode_video2(avctx, frame, &got_frame, pkt);
if (len < 0) {
fprintf(stderr, "Error while decoding frame %d\n", *frame_count);
return len;
}
if (got_frame) {
printf("Saving %sframe %3d\n", last ? "last " : "", *frame_count);
fflush(stdout);
/* the picture is allocated by the decoder, no need to free it */
snprintf(buf, sizeof(buf), outfilename, *frame_count);
pgm_save(frame->data[0], frame->linesize[0],
frame->width, frame->height, buf);
(*frame_count)++;
}
if (pkt->data) {
pkt->size -= len;
pkt->data += len;
}
return 0;
}
static void video_decode_example(const char *outfilename, const char *filename)
{
AVCodec *codec;
AVCodecContext *c= NULL;
int frame_count;
FILE *f;
AVFrame *frame;
uint8_t inbuf[INBUF_SIZE + AV_INPUT_BUFFER_PADDING_SIZE];
AVPacket avpkt;
av_init_packet(&avpkt);
/* set end of buffer to 0 (this ensures that no overreading happens for damaged mpeg streams) */
memset(inbuf + INBUF_SIZE, 0, AV_INPUT_BUFFER_PADDING_SIZE);
printf("Decode video file %s to %s\n", filename, outfilename);
/* find the mpeg1 video decoder */
codec = avcodec_find_decoder(AV_CODEC_ID_MPEG1VIDEO);
if (!codec) {
fprintf(stderr, "Codec not found\n");
exit(1);
}
c = avcodec_alloc_context3(codec);
if (!c) {
fprintf(stderr, "Could not allocate video codec context\n");
exit(1);
}
if (codec->capabilities & AV_CODEC_CAP_TRUNCATED)
c->flags |= AV_CODEC_FLAG_TRUNCATED; // we do not send complete frames
/* For some codecs, such as msmpeg4 and mpeg4, width and height
MUST be initialized there because this information is not
available in the bitstream. */
/* open it */
if (avcodec_open2(c, codec, NULL) < 0) {
fprintf(stderr, "Could not open codec\n");
exit(1);
}
f = fopen(filename, "rb");
if (!f) {
fprintf(stderr, "Could not open %s\n", filename);
exit(1);
}
frame = av_frame_alloc();
if (!frame) {
fprintf(stderr, "Could not allocate video frame\n");
exit(1);
}
frame_count = 0;
for (;;) {
avpkt.size = fread(inbuf, 1, INBUF_SIZE, f);
if (avpkt.size == 0)
break;
/* NOTE1: some codecs are stream based (mpegvideo, mpegaudio)
and this is the only method to use them because you cannot
know the compressed data size before analysing it.
BUT some other codecs (msmpeg4, mpeg4) are inherently frame
based, so you must call them with all the data for one
frame exactly. You must also initialize 'width' and
'height' before initializing them. */
/* NOTE2: some codecs allow the raw parameters (frame size,
sample rate) to be changed at any frame. We handle this, so
you should also take care of it */
/* here, we use a stream based decoder (mpeg1video), so we
feed decoder and see if it could decode a frame */
avpkt.data = inbuf;
while (avpkt.size > 0)
if (decode_write_frame(outfilename, c, frame, &frame_count, &avpkt, 0) < 0)
exit(1);
}
/* some codecs, such as MPEG, transmit the I and P frame with a
latency of one frame. You must do the following to have a
chance to get the last frame of the video */
avpkt.data = NULL;
avpkt.size = 0;
decode_write_frame(outfilename, c, frame, &frame_count, &avpkt, 1);
fclose(f);
avcodec_close(c);
av_free(c);
av_frame_free(&frame);
printf("\n");
}
int main(int argc, char **argv)
{
const char *output_type;
/* register all the codecs */
avcodec_register_all();
if (argc < 2) {
printf("usage: %s output_type\n"
"API example program to decode/encode a media stream with libavcodec.\n"
"This program generates a synthetic stream and encodes it to a file\n"
"named test.h264, test.mp2 or test.mpg depending on output_type.\n"
"The encoded stream is then decoded and written to a raw data output.\n"
"output_type must be chosen between 'h264', 'mp2', 'mpg'.\n",
argv[0]);
return 1;
}
output_type = argv[1];
if (!strcmp(output_type, "h264")) {
video_encode_example("test.h264", AV_CODEC_ID_H264);
} else if (!strcmp(output_type, "mp2")) {
audio_encode_example("test.mp2");
audio_decode_example("test.pcm", "test.mp2");
} else if (!strcmp(output_type, "mpg")) {
video_encode_example("test.mpg", AV_CODEC_ID_MPEG1VIDEO);
video_decode_example("test%02d.pgm", "test.mpg");
} else {
fprintf(stderr, "Invalid output type '%s', choose between 'h264', 'mp2', or 'mpg'\n",
output_type);
return 1;
}
return 0;
}What could be wrong ?
The command I used is :./demuxing_decoding /home/cortana/Burn.mp4 /home/cortana/Desktop/Burn.mp4 /home/cortana/Desktop/Burn.aac -
ffmpeg : how increase segment count in m3u8 file ?
27 juin 2016, par combo_ciI try to convert a *.mkv file to HLS(m3u8) file with this code in ffmpeg :
ffmpeg -i foo.mkv -acodec libfdk_aac -vcodec libx264 -s 800x600 -f segment blah.m3u8
when converting finish i see that only 5 name of segment exist in m3u8 file, a sample is :
#EXTM3U
#EXT-X-VERSION:3
#EXT-X-TARGETDURATION:10
#EXT-X-MEDIA-SEQUENCE:69
#EXTINF:1.400000,
169.ts
#EXTINF:10.000000,
170.ts
#EXTINF:5.240000,
171.ts
#EXTINF:10.000000,
172.ts
#EXTINF:1.920000,
173.ts
#EXT-X-ENDLISTand vlc could not play it ,anyone know that how i can make a m3u8 file with all converted segment ?
tnx
Syndiquer tout le site
