Recherche avancée

Sur d’autres sites (4639)

• ffmpeg issues "501 Not Implemented" while recording an RTSP stream

  28 février 2019, par atsushi

  I have a 4K camera (Sony SNC-VB770) streaming RTSP.

  I’m trying to record the stream into files (each has handy length, say, 1hour)
  using a simple script to repeatedly launch ffmpeg (ver 4.1) :

  while : ; do
  
    # (set $url and $outfile, and then)
  
    ffmpeg -rtsp_transport tcp -t 3600 -y -i $url -c copy -map 0:0 -b:v 16000k $outfile
  
  done

  If I run the script on a local PC directly connected to the camera, it works (longer than a week, at least).
  However, if I do the same on a server machine located in a data center, it fails randomly with no error message.
  Sometimes it runs for a few days, sometimes it dies in one minutes.

  Typical output looks like the following :

  # devname: snc-vb770
  
  # url: rtsp://10.40.35.90/media/video1
  
  # vb: 16000k
  
  # datefmt %d%H
  
  # addtimestamp 0
  
  no timestamp
  
  ffmpeg version 4.1 Copyright (c) 2000-2018 the FFmpeg developers
  
    built with gcc 4.4.7 (GCC) 20120313 (Red Hat 4.4.7-18)
  
    configuration: --prefix=/usr/local/ffmpeg-4.1 --enable-openssl --enable-gpl --enable-version3 --enable-nonfree --enable-shared --enable-libx264 --enable-libvorbis --enable-filter=drawtext --enable-libfreetype --enable-libfribidi --enable-fontconfig
  
    libavutil      56. 22.100 / 56. 22.100
  
    libavcodec     58. 35.100 / 58. 35.100
  
    libavformat    58. 20.100 / 58. 20.100
  
    libavdevice    58.  5.100 / 58.  5.100
  
    libavfilter     7. 40.101 /  7. 40.101
  
    libswscale      5.  3.100 /  5.  3.100
  
    libswresample   3.  3.100 /  3.  3.100
  
    libpostproc    55.  3.100 / 55.  3.100
  
  Input #0, rtsp, from 'rtsp://10.40.35.90/media/video1':
  
    Metadata:
  
      title           : Sony RTSP Server
  
    Duration: N/A, start: 0.066667, bitrate: N/A
  
      Stream #0:0: Video: h264 (High), yuv420p(tv, bt709, progressive), 3840x2160 [SAR 1:1 DAR 16:9], 14.99 fps, 14.99 tbr, 90k tbn, 29.97 tbc
  
  Output #0, mp4, to './2811.mp4':
  
    Metadata:
  
      title           : Sony RTSP Server
  
      encoder         : Lavf58.20.100
  
      Stream #0:0: Video: h264 (High) (avc1 / 0x31637661), yuv420p(tv, bt709, progressive), 3840x2160 [SAR 1:1 DAR 16:9], q=2-31, 16000 kb/s, 14.99 fps, 14.99 tbr, 90k tbn, 90k tbc
  
  Stream mapping:
  
    Stream #0:0 -> #0:0 (copy)
  
  Press [q] to stop, [?] for help
  
  [mp4 @ 0x24e4ec0] Timestamps are unset in a packet for stream 0. This is deprecated and will stop working in the future. Fix your code to set the timestamps properly
  
  [mp4 @ 0x24e4ec0] pts has no value
  
  [mp4 @ 0x24e4ec0] Non-monotonous DTS in output stream 0:0; previous: 0, current: 0; changing to 1. This may result in incorrect timestamps in the output file.
  
  frame=   33 fps=0.0 q=-1.0 size=    1792kB time=00:00:02.00 bitrate=7332.9kbits/s speed=3.57x
  
  ...
  
  frame=  104 fps=8.4 q=-1.0 Lsize=    6532kB time=00:00:06.74 bitrate=7939.6kbits/s speed=0.548x
  
  video:6531kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 0.023506%

  I’ve looked into RTSP packet and found an "RTSP/1.0 501 Not Implemented" is sent from ffmpeg to the camera.
  After that the camera eventually sent back "RTSP/1.0 505 RTSP Version not supported" and then ffmpeg quits shortly.

  The "501" packet seems to be generated by libavformat/rtsp.c:ff_rtsp_read_reply(),
  when ffmpeg receive a malformed RTSP packet with method=(null), status_code=0.
  I don’t know why such packets arrive at random timing and who is wrong (maybe the camera, maybe any of network switches or routers in the middle of the network path from the camera to the server machine).
  But anyway, I don’t want the recording to be stopped
  due to those malformed packets.

  Is there any workaround to make ffmpeg ignore invalid RTSP packets and just continue the recording ?

  Additional information :

  • I’ve tested the recording with both ffmpeg ver4.1 and 2.8.4 and no difference observed.

  • No difference observed at lower resolution nor at lower bitrate.

  • I have 3 cameras from various manufacturers in the same network environment.
    All of the three are working without problem for more than a month.
    Only the Sony SNC-VB770 shows the strange behavior.

• ffmpeg : edit metadata and automatically increment their name + set the value of "Title" based on "Name"

  29 décembre 2018, par J. Does

  This PowerShell code divides a large audio file (sound1) in 5 minutes parts and saves them as sound100_1.mp3, sound1_002.mp3...

  ffmpeg -i $file_name_complete -f segment -segment_time 300 -c copy $fileNameOnly"_"%03d$fileExtensionOnly

  • How can I set the metadata title to be the same than the file name ?

  • And how can I also (on the same time) edit the Album metadata with an incremental name (it’s useless, but it’s to understand how that work). It should be alb_1, alb_2.

  I have seen on the docs that I should use :

  -metadata title="my title"

  But :

  • should I repeat each time -metadata for each metadata ? EDIT : yes according to this

  • how can I increment the number since the title need to be quoted (-metadata title="$fileNameOnly""_"%03d won’t work since the last quote is missing)

  • how can I set the title field so it take the same value than the Name ?

  ---

  This did not work :

  ffmpeg -i $file_name_complete -f segment -segment_time 300 
  
         -metadata title="$fileNameOnly""_"%03d album="test" 
  
         -c copy $fileNameOnly"_"%03d$fileExtensionOnly

  I get this error :

  -metadata : The term ’-metadata’ is not recognized as the name of a cmdlet

• ffmpeg concat : "Unsafe file name"

  19 septembre 2024, par sers

  Trying to convert a bunch of mts-files into a big mp4-file :

  



  stephan@rechenmonster:/mnt/backupsystem/archive2/Videos/20151222/PRIVATE/AVCHD/BDMV$ ~/bin/ffmpeg-git-20160817-64bit-static/ffmpeg -v info -f concat -i <(find STREAM -name '*' -printf "file '$PWD/%p'\n") -deinterlace -r 25 -s hd720 -c:v libx264 -crf 23 -acodec copy -strict -2 ~/tmp/Videos/20151222.mp4
ffmpeg version N-81364-gf85842b-static http://johnvansickle.com/ffmpeg/  Copyright (c) 2000-2016 the FFmpeg developers
  built with gcc 5.4.1 (Debian 5.4.1-1) 20160803
  configuration: --enable-gpl --enable-version3 --enable-static --disable-debug --enable-libmp3lame --enable-libx264 --enable-libx265 --enable-libwebp --enable-libspeex --enable-libvorbis --enable-libvpx --enable-libfreetype --enable-fontconfig --enable-libxvid --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libtheora --enable-libvo-amrwbenc --enable-gray --enable-libopenjpeg --enable-libopus --enable-libass --enable-gnutls --enable-libvidstab --enable-libsoxr --enable-frei0r --enable-libfribidi --disable-indev=sndio --disable-outdev=sndio --enable-librtmp --enable-libmfx --enable-libzimg --cc=gcc-5
  libavutil      55. 28.100 / 55. 28.100
  libavcodec     57. 53.100 / 57. 53.100
  libavformat    57. 46.101 / 57. 46.101
  libavdevice    57.  0.102 / 57.  0.102
  libavfilter     6. 51.100 /  6. 51.100
  libswscale      4.  1.100 /  4.  1.100
  libswresample   2.  1.100 /  2.  1.100
  libpostproc    54.  0.100 / 54.  0.100
[concat @ 0x56054a0] Unsafe file name '/mnt/backupsystem/archive2/Videos/20151222/PRIVATE/AVCHD/BDMV/STREAM'
/dev/fd/63: Operation not permitted


  



  Any ideas what goes wrong here ? What does the term "unsafe file" mean in this context ?