Recherche avancée

Sur d’autres sites (13263)

• ffmpeg could not find codec parameters for stream 0 on Ubuntu 22.04, works fine on Ubuntu 18.04

  22 février 2023, par ngm

  I'm new to ffmpeg but I've got an odd issue which seems to arise from using it on different Ubuntu versions.

  


  I have an NVIDIA Jetson Nano running Ubuntu 18.04.5 LTS (GNU/Linux 4.9.201-tegra aarch64). Plugged into the Nano's carrier board is an embedded camera that shows up as a Sunplus Innovation Technology Inc. USB2.0 Camera RGB when I run lsusb.

  


  When I run this ffmpeg command, I can successfully record video from the camera, which seems to be mjpeg codec with yuvj422p pixel format. The output is as follows :

  


  ffmpeg -f video4linux2 -i /dev/video0 -an -vcodec libx264 test_capture.mp4
ffmpeg version 3.4.8-0ubuntu0.2 Copyright (c) 2000-2020 the FFmpeg developers
  built with gcc 7 (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04)
  configuration: --prefix=/usr --extra-version=0ubuntu0.2 --toolchain=hardened --libdir=/usr/lib/aarch64-linux-gnu --incdir=/usr/include/aarch64-linux-gnu --enable-gpl --disable-stripping --enable-avresample --enable-avisynth --enable-gnutls --enable-ladspa --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librubberband --enable-librsvg --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-omx --enable-openal --enable-opengl --enable-sdl2 --enable-libdc1394 --enable-libdrm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libopencv --enable-libx264 --enable-shared
  libavutil      55. 78.100 / 55. 78.100
  libavcodec     57.107.100 / 57.107.100
  libavformat    57. 83.100 / 57. 83.100
  libavdevice    57. 10.100 / 57. 10.100
  libavfilter     6.107.100 /  6.107.100
  libavresample   3.  7.  0 /  3.  7.  0
  libswscale      4.  8.100 /  4.  8.100
  libswresample   2.  9.100 /  2.  9.100
  libpostproc    54.  7.100 / 54.  7.100
Input #0, video4linux2,v4l2, from '/dev/video0':
  Duration: N/A, start: 166.142773, bitrate: N/A
    Stream #0:0: Video: mjpeg, yuvj422p(pc, bt470bg/unknown/unknown), 928x400, 100 fps, 100 tbr, 1000k tbn, 1000k tbc
Stream mapping:
  Stream #0:0 -> #0:0 (mjpeg (native) -> h264 (libx264))
Press [q] to stop, [?] for help
[libx264 @ 0x558553df70] using cpu capabilities: ARMv8 NEON
[libx264 @ 0x558553df70] profile High 4:2:2, level 3.2, 4:2:2 8-bit
[libx264 @ 0x558553df70] 264 - core 152 r2854 e9a5903 - H.264/MPEG-4 AVC codec - Copyleft 2003-2017 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=6 lookahead_threads=1 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
Output #0, mp4, to 'test_capture.mp4':
  Metadata:
    encoder         : Lavf57.83.100
    Stream #0:0: Video: h264 (libx264) (avc1 / 0x31637661), yuvj422p(pc), 928x400, q=-1--1, 100 fps, 12800 tbn, 100 tbc
    Metadata:
      encoder         : Lavc57.107.100 libx264
    Side data:
      cpb: bitrate max/min/avg: 0/0/0 buffer size: 0 vbv_delay: -1
frame=  192 fps= 65 q=-1.0 Lsize=     151kB time=00:00:01.89 bitrate= 654.4kbits/s dup=150 drop=0 speed=0.642x    
video:148kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 2.072495%
[libx264 @ 0x558553df70] frame I:1     Avg QP:23.62  size: 36953
[libx264 @ 0x558553df70] frame P:49    Avg QP:25.25  size:  2121
[libx264 @ 0x558553df70] frame B:142   Avg QP:30.55  size:    70
[libx264 @ 0x558553df70] consecutive B-frames:  1.0%  1.0%  0.0% 97.9%
[libx264 @ 0x558553df70] mb I  I16..4: 10.1% 78.8% 11.1%
[libx264 @ 0x558553df70] mb P  I16..4:  1.1%  1.9%  0.0%  P16..4: 19.1%  3.0%  2.0%  0.0%  0.0%    skip:72.8%
[libx264 @ 0x558553df70] mb B  I16..4:  0.0%  0.0%  0.0%  B16..8:  2.7%  0.0%  0.0%  direct: 0.1%  skip:97.2%  L0:36.8% L1:62.3% BI: 0.9%
[libx264 @ 0x558553df70] 8x8 transform intra:68.4% inter:77.4%
[libx264 @ 0x558553df70] coded y,uvDC,uvAC intra: 42.0% 80.2% 41.3% inter: 2.2% 5.4% 0.2%
[libx264 @ 0x558553df70] i16 v,h,dc,p: 50% 17% 10% 23%
[libx264 @ 0x558553df70] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 21%  9% 32%  5%  7%  7%  5%  8%  5%
[libx264 @ 0x558553df70] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 24% 15% 12%  5% 14% 11%  8%  5%  7%
[libx264 @ 0x558553df70] i8c dc,h,v,p: 50% 12% 26% 12%
[libx264 @ 0x558553df70] Weighted P-Frames: Y:28.6% UV:28.6%
[libx264 @ 0x558553df70] ref P L0: 56.4% 28.2% 12.0%  2.5%  0.9%
[libx264 @ 0x558553df70] ref B L0: 93.4%  5.3%  1.3%
[libx264 @ 0x558553df70] ref B L1: 94.9%  5.1%
[libx264 @ 0x558553df70] kb/s:628.21
Exiting normally, received signal 2.


  


  However, I'd like to replace this Nano with another that I've upgraded to Ubuntu 22.04.1 LTS (GNU/Linux 4.9.299-tegra aarch64). The device still shows up as the same type when running lsusb. Running the exact same command results in the following :

  


  ffmpeg -f video4linux2 -i /dev/video0 -an -vcodec libx264 test_capture.mp4
ffmpeg version 4.4.2-0ubuntu0.22.04.1 Copyright (c) 2000-2021 the FFmpeg developers
  built with gcc 11 (Ubuntu 11.2.0-19ubuntu1)
  configuration: --prefix=/usr --extra-version=0ubuntu0.22.04.1 --toolchain=hardened --libdir=/usr/lib/aarch64-linux-gnu --incdir=/usr/include/aarch64-linux-gnu --arch=arm64 --enable-gpl --disable-stripping --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libdav1d --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librabbitmq --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libsrt --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzimg --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opencl --enable-opengl --enable-sdl2 --enable-pocketsphinx --enable-librsvg --enable-libdc1394 --enable-libdrm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --enable-shared
  libavutil      56. 70.100 / 56. 70.100
  libavcodec     58.134.100 / 58.134.100
  libavformat    58. 76.100 / 58. 76.100
  libavdevice    58. 13.100 / 58. 13.100
  libavfilter     7.110.100 /  7.110.100
  libswscale      5.  9.100 /  5.  9.100
  libswresample   3.  9.100 /  3.  9.100
  libpostproc    55.  9.100 / 55.  9.100
[video4linux2,v4l2 @ 0x55cab86450] Could not find codec parameters for stream 0 (Video: mjpeg, none(bt470bg/unknown/unknown), 1856x800): unspecified pixel format
Consider increasing the value for the 'analyzeduration' (0) and 'probesize' (5000000) options
Input #0, video4linux2,v4l2, from '/dev/video0':
  Duration: N/A, bitrate: N/A
  Stream #0:0: Video: mjpeg, none(bt470bg/unknown/unknown), 1856x800, 60 fps, 60 tbr, 1000k tbn, 1000k tbc
Stream mapping:
  Stream #0:0 -> #0:0 (mjpeg (native) -> h264 (libx264))
Press [q] to stop, [?] for help
Cannot determine format of input stream 0:0 after EOF
Error marking filters as finished
Exiting normally, received signal 2.


  


  I'm not sure why I can't read this video stream when everything seems to be the same but the OS and the ffmpeg version.

  


  I've checked the available codecs and pixel formats using ffmpeg -codecs and ffmpeg -pix_fmts :

  


  Ubuntu 18.04.5, ffmpeg version 3.4.8-0ubuntu0.2 :

  


  DEVIL. mjpeg                Motion JPEG (encoders: mjpeg mjpeg_vaapi )

  


  IO... yuvj422p               3            16

  


  Ubuntu 22.04.1, ffmpeg version 4.4.2-0ubuntu0.22.04.1 :

  


  DEVIL. mjpeg                Motion JPEG (decoders: mjpeg mjpeg_cuvid ) (encoders: mjpeg mjpeg_vaapi )

  


  IO... yuvj422p               3            16

  


  So it seems like I should be able to record video on both with this codec/pixel format combination.

  


  I've also tried forcing ffmpeg to use this combination on the 22.04 Nano with the following command :

  


  ffmpeg -f v4l2 -input_format mjpeg -framerate 100 -video_size 928x400 -pix_fmt yuvj422p -i /dev/video0 -an -vcodec libx264 test_capture.mp4

  


  But I get the same error. I've also tried increasing the -analyzeduration and -probesize arguments to 100M, with no luck.

  


  Are there other commands or settings I should use ? Should I downgrade my ffmpeg version if possible ?

  


• ffmpeg / avconv Unrecognized option 'target=vcd'

  2 février 2023, par Paul Neuwirth

  I get following error

  


  Unrecognized option 'target=vcd'.
Error splitting the argument list: Option not found


  


  running

  


  ffmpeg -i input.ts -target=vcd output.mpg


  


  or

  


  avconv -i input.ts -target=vcd output.mpg


  


  (or any other target like "pal-dvd", like stated in the man-file)

  


  version info ffmpeg :

  


  


  ffmpeg version 4.4 Copyright (c) 2000-2021 the FFmpeg developers
built with gcc 7 (SUSE Linux)
configuration : —prefix=/usr —libdir=/usr/lib64 —shlibdir=/usr/lib64 —incdir=/usr/include/ffmpeg —extra-cflags='-fmessage-length=0 -grecord-gcc-switches -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector-strong -funwind-tables -fasynchronous-unwind-tables -fstack-clash-protection -g' —optflags='-fmessage-length=0 -grecord-gcc-switches -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector-strong -funwind-tables -fasynchronous-unwind-tables -fstack-clash-protection -g' —disable-htmlpages —enable-pic —disable-stripping —enable-shared —disable-static —enable-gpl —enable-version3 —disable-openssl —enable-avresample —enable-gnutls —enable-ladspa —enable-libass —enable-libbluray —enable-libbs2b —enable-libcelt —enable-libcdio —enable-libdav1d —enable-libdc1394 —enable-libdrm —enable-libfontconfig —enable-libfreetype —enable-libfribidi —enable-libgsm —enable-libjack —enable-libmp3lame —enable-libopenjpeg —enable-libopenmpt —enable-libopus —enable-libpulse —enable-libspeex —enable-libssh —enable-libtheora —enable-libtwolame —enable-libvidstab —enable-libvmaf —enable-libvorbis —enable-libv4l2 —enable-libvpx —enable-libwebp —enable-libxml2 —enable-libzimg —enable-libzvbi —enable-libmfx —enable-vaapi —enable-vdpau —enable-version3 —enable-libfdk-aac-dlopen —enable-nonfree —enable-libvo-amrwbenc —enable-libx264 —enable-libx265 —enable-librtmp —enable-libxvid
libavutil 56. 70.100 / 56. 70.100
libavcodec 58.134.100 / 58.134.100
libavformat 58. 76.100 / 58. 76.100
libavdevice 58. 13.100 / 58. 13.100
libavfilter 7.110.100 / 7.110.100
libavresample 4. 0. 0 / 4. 0. 0
libswscale 5. 9.100 / 5. 9.100
libswresample 3. 9.100 / 3. 9.100
libpostproc 55. 9.100 / 55. 9.100

  


  


  version info avconv

  


  


  avconv version 12.3, Copyright (c) 2000-2018 the Libav developers
  
built on Mar 26 2018 12:39 with gcc 7 (SUSE Linux) configuration :
—prefix=/usr —libdir=/usr/lib64 —shlibdir=/usr/lib64 —extra-cflags='-fmessage-length=0 -grecord-gcc-switches -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector-strong -funwind-tables -fasynchronous-unwind-tables -fstack-clash-protection -g' —optflags='-fmessage-length=0 -grecord-gcc-switches -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector-strong -funwind-tables -fasynchronous-unwind-tables -fstack-clash-protection -g' —incdir=/usr/include/libav —enable-pic —disable-yasm WARNING : library configuration mismatch avutil configuration :
—prefix=/usr —libdir=/usr/lib64 —shlibdir=/usr/lib64 —incdir=/usr/include/ffmpeg —extra-cflags='-fmessage-length=0 -grecord-gcc-switches -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector-strong -funwind-tables -fasynchronous-unwind-tables -fstack-clash-protection -g' —optflags='-fmessage-length=0 -grecord-gcc-switches -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector-strong -funwind-tables -fasynchronous-unwind-tables -fstack-clash-protection -g' —disable-htmlpages —enable-pic —disable-stripping —enable-shared —disable-static —enable-gpl —disable-openssl —enable-avresample —enable-libcdio —enable-gnutls —enable-ladspa —enable-libass —enable-libbluray —enable-libcelt —enable-libcdio —enable-libdc1394 —enable-libfreetype —enable-libgsm —enable-libmp3lame —enable-libopenjpeg —enable-libopus —enable-libpulse —enable-libspeex —enable-libtheora —enable-libtwolame —enable-libvidstab —enable-libvorbis —enable-libvpx —enable-libwebp —enable-libzimg —enable-libzvbi —enable-vaapi —enable-vdpau —enable-libopencore-amrnb —enable-libopencore-amrwb —enable-version3 —enable-libx264 —enable-libx265 —enable-libxvid avcodec configuration : —prefix=/usr —libdir=/usr/lib64
—shlibdir=/usr/lib64 —incdir=/usr/include/ffmpeg —extra-cflags='-fmessage-length=0 -grecord-gcc-switches -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector-strong -funwind-tables -fasynchronous-unwind-tables -fstack-clash-protection -g' —optflags='-fmessage-length=0 -grecord-gcc-switches -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector-strong -funwind-tables -fasynchronous-unwind-tables -fstack-clash-protection -g' —disable-htmlpages —enable-pic —disable-stripping —enable-shared —disable-static —enable-gpl —disable-openssl —enable-avresample —enable-libcdio —enable-gnutls —enable-ladspa —enable-libass —enable-libbluray —enable-libcelt —enable-libcdio —enable-libdc1394 —enable-libfreetype —enable-libgsm —enable-libmp3lame —enable-libopenjpeg —enable-libopus —enable-libpulse —enable-libspeex —enable-libtheora —enable-libtwolame —enable-libvidstab —enable-libvorbis —enable-libvpx —enable-libwebp —enable-libzimg —enable-libzvbi —enable-vaapi —enable-vdpau —enable-libopencore-amrnb —enable-libopencore-amrwb —enable-version3 —enable-libx264 —enable-libx265 —enable-libxvid avformat configuration : —prefix=/usr —libdir=/usr/lib64 —shlibdir=/usr/lib64 —incdir=/usr/include/ffmpeg —extra-cflags='-fmessage-length=0 -grecord-gcc-switches -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector-strong -funwind-tables -fasynchronous-unwind-tables -fstack-clash-protection -g' —optflags='-fmessage-length=0 -grecord-gcc-switches -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector-strong -funwind-tables -fasynchronous-unwind-tables -fstack-clash-protection -g' —disable-htmlpages —enable-pic —disable-stripping —enable-shared —disable-static —enable-gpl —disable-openssl —enable-avresample —enable-libcdio —enable-gnutls —enable-ladspa —enable-libass —enable-libbluray —enable-libcelt —enable-libcdio —enable-libdc1394 —enable-libfreetype —enable-libgsm —enable-libmp3lame —enable-libopenjpeg —enable-libopus —enable-libpulse —enable-libspeex —enable-libtheora —enable-libtwolame —enable-libvidstab —enable-libvorbis —enable-libvpx —enable-libwebp —enable-libzimg —enable-libzvbi —enable-vaapi —enable-vdpau —enable-libopencore-amrnb —enable-libopencore-amrwb —enable-version3 —enable-libx264 —enable-libx265 —enable-libxvid avdevice configuration : —prefix=/usr —libdir=/usr/lib64
—shlibdir=/usr/lib64 —incdir=/usr/include/ffmpeg —extra-cflags='-fmessage-length=0 -grecord-gcc-switches -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector-strong -funwind-tables -fasynchronous-unwind-tables -fstack-clash-protection -g' —optflags='-fmessage-length=0 -grecord-gcc-switches -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector-strong -funwind-tables -fasynchronous-unwind-tables -fstack-clash-protection -g' —disable-htmlpages —enable-pic —disable-stripping —enable-shared —disable-static —enable-gpl —disable-openssl —enable-avresample —enable-libcdio —enable-gnutls —enable-ladspa —enable-libass —enable-libbluray —enable-libcelt —enable-libcdio —enable-libdc1394 —enable-libfreetype —enable-libgsm —enable-libmp3lame —enable-libopenjpeg —enable-libopus —enable-libpulse —enable-libspeex —enable-libtheora —enable-libtwolame —enable-libvidstab —enable-libvorbis —enable-libvpx —enable-libwebp —enable-libzimg —enable-libzvbi —enable-vaapi —enable-vdpau —enable-libopencore-amrnb —enable-libopencore-amrwb —enable-version3 —enable-libx264 —enable-libx265 —enable-libxvid avfilter configuration : —prefix=/usr —libdir=/usr/lib64 —shlibdir=/usr/lib64 —incdir=/usr/include/ffmpeg —extra-cflags='-fmessage-length=0 -grecord-gcc-switches -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector-strong -funwind-tables -fasynchronous-unwind-tables -fstack-clash-protection -g' —optflags='-fmessage-length=0 -grecord-gcc-switches -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector-strong -funwind-tables -fasynchronous-unwind-tables -fstack-clash-protection -g' —disable-htmlpages —enable-pic —disable-stripping —enable-shared —disable-static —enable-gpl —disable-openssl —enable-avresample —enable-libcdio —enable-gnutls —enable-ladspa —enable-libass —enable-libbluray —enable-libcelt —enable-libcdio —enable-libdc1394 —enable-libfreetype —enable-libgsm —enable-libmp3lame —enable-libopenjpeg —enable-libopus —enable-libpulse —enable-libspeex —enable-libtheora —enable-libtwolame —enable-libvidstab —enable-libvorbis —enable-libvpx —enable-libwebp —enable-libzimg —enable-libzvbi —enable-vaapi —enable-vdpau —enable-libopencore-amrnb —enable-libopencore-amrwb —enable-version3 —enable-libx264 —enable-libx265 —enable-libxvid avresample configuration : —prefix=/usr —libdir=/usr/lib64
—shlibdir=/usr/lib64 —incdir=/usr/include/ffmpeg —extra-cflags='-fmessage-length=0 -grecord-gcc-switches -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector-strong -funwind-tables -fasynchronous-unwind-tables -fstack-clash-protection -g' —optflags='-fmessage-length=0 -grecord-gcc-switches -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector-strong -funwind-tables -fasynchronous-unwind-tables -fstack-clash-protection -g' —disable-htmlpages —enable-pic —disable-stripping —enable-shared —disable-static —enable-gpl —disable-openssl —enable-avresample —enable-libcdio —enable-gnutls —enable-ladspa —enable-libass —enable-libbluray —enable-libcelt —enable-libcdio —enable-libdc1394 —enable-libfreetype —enable-libgsm —enable-libmp3lame —enable-libopenjpeg —enable-libopus —enable-libpulse —enable-libspeex —enable-libtheora —enable-libtwolame —enable-libvidstab —enable-libvorbis —enable-libvpx —enable-libwebp —enable-libzimg —enable-libzvbi —enable-vaapi —enable-vdpau —enable-libopencore-amrnb —enable-libopencore-amrwb —enable-version3 —enable-libx264 —enable-libx265 —enable-libxvid swscale configuration : —prefix=/usr —libdir=/usr/lib64 —shlibdir=/usr/lib64 —incdir=/usr/include/ffmpeg —extra-cflags='-fmessage-length=0 -grecord-gcc-switches -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector-strong -funwind-tables -fasynchronous-unwind-tables -fstack-clash-protection -g' —optflags='-fmessage-length=0 -grecord-gcc-switches -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector-strong -funwind-tables -fasynchronous-unwind-tables -fstack-clash-protection -g' —disable-htmlpages —enable-pic —disable-stripping —enable-shared —disable-static —enable-gpl —disable-openssl —enable-avresample —enable-libcdio —enable-gnutls —enable-ladspa —enable-libass —enable-libbluray —enable-libcelt —enable-libcdio —enable-libdc1394 —enable-libfreetype —enable-libgsm —enable-libmp3lame —enable-libopenjpeg —enable-libopus —enable-libpulse —enable-libspeex —enable-libtheora —enable-libtwolame —enable-libvidstab —enable-libvorbis —enable-libvpx —enable-libwebp —enable-libzimg —enable-libzvbi —enable-vaapi —enable-vdpau —enable-libopencore-amrnb —enable-libopencore-amrwb —enable-version3 —enable-libx264 —enable-libx265 —enable-libxvid libavutil 55. 78.100 / 55. 78.100 libavcodec 57.107.100 /
57.107.100 libavformat 57. 83.100 / 57. 83.100 libavdevice 57. 10.100 / 57. 10.100 libavfilter 6.107.100 / 6.107.100 libavresample 3. 7. 0 / 3. 7. 0 libswscale 4. 8.100 / 4.
8.100

  


  


  despite solving the problem, I'd be happy with any other solution to compress video to pal-dvd or pal-vcd standard

  


  I tried re-encoding a mpeg-2 video using avconv and/or ffmpeg to target pal-dvd or pal-vcd or even just vcd or dvd.
manpage states option -target as main option :

  


  


      -target type (output)


  


  Specify target file type ("vcd", "svcd", "dvd", "dv", "dv50"). type may be prefixed with "pal-", "ntsc-" or "film-" to use the corresponding standard. All the format options
(bitrate, codecs, buffer sizes) are then set automatically. You can just type :

  


  avconv -i myfile.avi -target vcd /tmp/vcd.mpg

  


  Nevertheless you can specify additional options as long as you know they do not conflict with the standard, as in :

  


  avconv -i myfile.avi -target vcd -bf 2 /tmp/vcd.mpg

  


  


• What is Multi-Touch Attribution ? (And How To Get Started)

  2 février 2023, par Erin — Analytics Tips

  Good marketing thrives on data. Or more precisely — its interpretation. Using modern analytics software, we can determine which marketing actions steer prospects towards the desired action (a conversion event). 

  An attribution model in marketing is a set of rules that determine how various marketing tactics and channels impact the visitor’s progress towards a conversion. 

  Yet, as customer journeys become more complicated and involve multiple “touches”, standard marketing reports no longer tell the full picture. 

  That’s when multi-touch attribution analysis comes to the fore. 

  What is Multi-Touch Attribution ?

  Multi-touch attribution (also known as multi-channel attribution or cross-channel attribution) measures the impact of all touchpoints on the consumer journey on conversion. 

  Unlike single-touch reporting, multi-touch attribution models give credit to each marketing element — a social media ad, an on-site banner, an email link click, etc. By seeing impacts from every touchpoint and channel, marketers can avoid false assumptions or subpar budget allocations.

  To better understand the concept, let’s interpret the same customer journey using a standard single-touch report vs a multi-touch attribution model. 

  Picture this : Jammie is shopping around for a privacy-centred web analytics solution. She saw a recommendation on Twitter and ended up on the Matomo website. After browsing a few product pages and checking comparisons with other web analytics tools, she signs up for a webinar. One week after attending, Jammie is convinced that Matomo is the right tool for her business and goes directly to the Matomo website a starts a free trial. 

  • A standard single-touch report would attribute 100% of the conversion to direct traffic, which doesn’t give an accurate view of the multiple touchpoints that led Jammie to start a free trial. 
  • A multi-channel attribution report would showcase all the channels involved in the free trial conversion — social media, website content, the webinar, and then the direct traffic source.

  In other words : Multi-touch attribution helps you understand how prospects move through the sales funnel and which elements tinder them towards the desired outcome. 

  Types of Attribution Models

  As marketers, we know that multiple factors play into a conversion — channel type, timing, user’s stage on the buyer journey and so on. Various attribution models exist to reflect this variability. 

  

  First Interaction attribution model (otherwise known as first touch) gives all credit for the conversion to the first channel (for example — a referral link) and doesn’t report on all the other interactions a user had with your company (e.g., clicked a newsletter link, engaged with a landing page, or browsed the blog campaign).

  First-touch helps optimise the top of your funnel and establish which channels bring the best leads. However, it doesn’t offer any insight into other factors that persuaded a user to convert. 

  Last Interaction attribution model (also known as last touch) allocates 100% credit to the last channel before conversion — be it direct traffic, paid ad, or an internal product page.

  The data is useful for optimising the bottom-of-the-funnel (BoFU) elements. But you have no visibility into assisted conversions — interactions a user had prior to conversion. 

  Last Non-Direct attribution model model excludes direct traffic and assigns 100% credit for a conversion to the last channel a user interacted with before converting. For instance, a social media post will receive 100% of credit if a shopper buys a product three days later. 

  This model is more telling about the other channels, involved in the sales process. Yet, you’re seeing only one step backwards, which may not be sufficient for companies with longer sales cycles.

  Linear attribution model distributes an equal credit for a conversion between all tracked touchpoints.

  For instance, with a four touchpoint conversion (e.g., an organic visit, then a direct visit, then a social visit, then a visit and conversion from an ad campaign) each touchpoint would receive 25% credit for that single conversion.

  This is the simplest multi-channel attribution modelling technique many tools support. The nuance is that linear models don’t reflect the true impact of various events. After all, a paid ad that introduced your brand to the shopper and a time-sensitive discount code at the checkout page probably did more than the blog content a shopper browsed in between. 

  Position Based attribution model allocates a 40% credit to the first and the last touchpoints and then spreads the remaining 20% across the touchpoints between the first and last. 

  This attribution model comes in handy for optimising conversions across the top and the bottom of the funnel. But it doesn’t provide much insight into the middle, which can skew your decision-making. For instance, you may overlook cases when a shopper landed via a social media post, then was re-engaged via email, and proceeded to checkout after an organic visit. Without email marketing, that sale may not have happened.

  Time decay attribution model adjusts the credit, based on the timing of the interactions. Touchpoints that preceded the conversion get the highest score, while the first ones get less weight (e.g., 5%-5%-10%-15%-25%-30%).

  This multi-channel attribution model works great for tracking the bottom of the funnel, but it underestimates the impact of brand awareness campaigns or assisted conversions at mid-stage. 

  Why Use Multi-Touch Attribution Modelling

  Multi-touch attribution provides you with the full picture of your funnel. With accurate data across all touchpoints, you can employ targeted conversion rate optimisation (CRO) strategies to maximise the impact of each campaign. 

  Most marketers and analysts prefer using multi-touch attribution modelling — and for some good reasons.

  Issues multi-touch attribution solves 

  • Funnel visibility. Understand which tactics play an important role at the top, middle and bottom of your funnel, instead of second-guessing what’s working or not. 
  • Budget allocations. Spend money on channels and tactics that bring a positive return on investment (ROI). 
  • Assisted conversions. Learn how different elements and touchpoints cumulatively contribute to the ultimate goal — a conversion event — to optimise accordingly. 
  • Channel segmentation. Determine which assets drive the most qualified and engaged leads to replicate them at scale.
  • Campaign benchmarking. Compare how different marketing activities from affiliate marketing to social media perform against the same metrics.

  How To Get Started With Multi-Touch Attribution 

  To make multi-touch attribution part of your analytics setup, follow the next steps :

  1. Define Your Marketing Objectives 

  Multi-touch attribution helps you better understand what led people to convert on your site. But to capture that, you need to first map the standard purchase journeys, which include a series of touchpoints — instances, when a prospect forms an opinion about your business.

  Touchpoints include :

  • On-site interactions (e.g., reading a blog post, browsing product pages, using an on-site calculator, etc.)
  • Off-site interactions (e.g., reading a review, clicking a social media link, interacting with an ad, etc.)

  Combined these interactions make up your sales funnel — a designated path you’ve set up to lead people toward the desired action (aka a conversion). 

  Depending on your business model, you can count any of the following as a conversion :

  • Purchase 
  • Account registration 
  • Free trial request 
  • Contact form submission 
  • Online reservation 
  • Demo call request 
  • Newsletter subscription

  So your first task is to create a set of conversion objectives for your business and add them as Goals or Conversions in your web analytics solution. Then brainstorm how various touchpoints contribute to these objectives. 

  Web analytics tools with multi-channel attribution, like Matomo, allow you to obtain an extra dimension of data on touchpoints via Tracked Events. Using Event Tracking, you can analyse how many people started doing a desired action (e.g., typing details into the form) but never completed the task. This way you can quickly identify “leaking” touchpoints in your funnel and fix them. 

  2. Select an Attribution Model 

  Multi-attribution models have inherent tradeoffs. Linear attribution model doesn’t always represent the role and importance of each channel. Position-based attribution model emphasises the role of the last and first channel while diminishing the importance of assisted conversions. Time-decay model, on the contrary, downplays the role awareness-related campaigns played.

  To select the right attribution model for your business consider your objectives. Is it more important for you to understand your best top of funnel channels to optimise customer acquisition costs (CAC) ? Or would you rather maximise your on-site conversion rates ? 

  Your industry and the average cycle length should also guide your choice. Position-based models can work best for eCommerce and SaaS businesses where both CAC and on-site conversion rates play an important role. Manufacturing companies or educational services providers, on the contrary, will benefit more from a time-decay model as it better represents the lengthy sales cycles. 

  3. Collect and Organise Data From All Touchpoints 

  Multi-touch attribution models are based on available funnel data. So to get started, you will need to determine which data sources you have and how to best leverage them for attribution modelling. 

  Types of data you should collect : 

  • General web analytics data : Insights on visitors’ on-site actions — visited pages, clicked links, form submissions and more.
  • Goals (Conversions) : Reports on successful conversions across different types of assets. 
  • Behavioural user data : Some tools also offer advanced features such as heatmaps, session recording and A/B tests. These too provide ample data into user behaviours, which you can use to map and optimise various touchpoints.

  You can also implement extra tracking, for instance for contact form submissions, live chat contacts or email marketing campaigns to identify repeat users in your system. Just remember to stay on the good side of data protection laws and respect your visitors’ privacy. 

  Separately, you can obtain top-of-the-funnel data by analysing referral traffic sources (channel, campaign type, used keyword, etc). A Tag Manager comes in handy as it allows you to zoom in on particular assets (e.g., a newsletter, an affiliate, a social campaign, etc). 

  Combined, these data points can be parsed by an app, supporting multi-touch attribution (or a custom algorithm) and reported back to you as specific findings. 

  Sounds easy, right ? Well, the devil is in the details. Getting ample, accurate data for multi-touch attribution modelling isn’t easy. 

  Marketing analytics has an accuracy problem, mainly for two reasons :

  • Cookie consent banner rejection 
  • Data sampling application

  Please note that we are not able to provide legal advice, so it’s important that you consult with your own DPO to ensure compliance with all relevant laws and regulations.

  If you’re collecting web analytics in the EU, you know that showing a cookie consent banner is a GDPR must-do. But many consumers don’t often rush to accept cookie consent banners. The average consent rate for cookies in 2021 stood at 54% in Italy, 45% in France, and 44% in Germany. The consent rates are likely lower in 2023, as Google was forced to roll out a “reject all” button for cookie tracking in Europe, while privacy organisations lodge complaints against individual businesses for deceptive banners. 

  For marketers, cookie rejection means substantial gaps in analytics data. The good news is that you can fill in those gaps by using a privacy-centred web analytics tool like Matomo. 

  Matomo takes extra safeguards to protect user privacy and supports fully cookieless tracking. Because of that, Matomo is legally exempt from tracking consent in France. Plus, you can configure to use our analytics tool without consent banners in other markets outside of Germany and the UK. This way you get to retain the data you need for audience modelling without breaching any privacy regulations. 

  Data sampling application partially stems from the above. When a web analytics or multi-channel attribution tool cannot secure first-hand data, the “guessing game” begins. Google Analytics, as well as other tools, often rely on synthetic AI-generated data to fill in the reporting gaps. Respectively, your multi-attribution model doesn’t depict the real state of affairs. Instead, it shows AI-produced guesstimates of what transpired whenever not enough real-world evidence is available.

  4. Evaluate and Select an Attribution Tool 

  Google Analytics (GA) offers several multi-touch attribution models for free (linear, time-decay and position-based). The disadvantage of GA multi-touch attribution is its lower accuracy due to cookie rejection and data sampling application.

  At the same time, you cannot create custom credit allocations for the proposed models, unless you have the paid version of GA, Google Analytics 360. This version of GA comes with a custom Attribution Modeling Tool (AMT). The price tag, however, starts at USD $50,000 per year. 

  Matomo Cloud offers multi-channel conversion attribution as a feature and it is available as a plug-in on the marketplace for Matomo On-Premise. We support linear, position-based, first-interaction, last-interaction, last non-direct and time-decay modelling, based fully on first-hand data. You also get more precise insights because cookie consent isn’t an issue with us. 

  Most multi-channel attribution tools, like Google Analytics and Matomo, provide out-of-the-box multi-touch attribution models. But other tools, like Matomo On-Premise, also provide full access to raw data so you can develop your own multi-touch attribution models and do custom attribution analysis. The ability to create custom attribution analysis is particularly beneficial for data analysts or organisations with complex and unique buyer journeys. 

  Conclusion

  Ultimately, multi-channel attribution gives marketers greater visibility into the customer journey. By analysing multiple touchpoints, you can establish how various marketing efforts contribute to conversions. Then use this information to inform your promotional strategy, budget allocations and CRO efforts. 

  The key to benefiting the most from multi-touch attribution is accurate data. If your analytics solution isn’t telling you the full story, your multi-touch model won’t either. 

  Collect accurate visitor data for multi-touch attribution modelling with Matomo. Start your free 21-day trial now.