Recherche avancée

Médias (91)

Autres articles (28)

  • Ajouter notes et légendes aux images

    7 février 2011, par

    Pour pouvoir ajouter notes et légendes aux images, la première étape est d’installer le plugin "Légendes".
    Une fois le plugin activé, vous pouvez le configurer dans l’espace de configuration afin de modifier les droits de création / modification et de suppression des notes. Par défaut seuls les administrateurs du site peuvent ajouter des notes aux images.
    Modification lors de l’ajout d’un média
    Lors de l’ajout d’un média de type "image" un nouveau bouton apparait au dessus de la prévisualisation (...)

  • HTML5 audio and video support

    13 avril 2011, par

    MediaSPIP uses HTML5 video and audio tags to play multimedia files, taking advantage of the latest W3C innovations supported by modern browsers.
    The MediaSPIP player used has been created specifically for MediaSPIP and can be easily adapted to fit in with a specific theme.
    For older browsers the Flowplayer flash fallback is used.
    MediaSPIP allows for media playback on major mobile platforms with the above (...)

  • De l’upload à la vidéo finale [version standalone]

    31 janvier 2010, par

    Le chemin d’un document audio ou vidéo dans SPIPMotion est divisé en trois étapes distinctes.
    Upload et récupération d’informations de la vidéo source
    Dans un premier temps, il est nécessaire de créer un article SPIP et de lui joindre le document vidéo "source".
    Au moment où ce document est joint à l’article, deux actions supplémentaires au comportement normal sont exécutées : La récupération des informations techniques des flux audio et video du fichier ; La génération d’une vignette : extraction d’une (...)

Sur d’autres sites (1699)

  • FFmpeg Drawtext - Fontconfig error : Cannot load default config file : No such file : (null)

    29 mars 2023, par James

    I get the message : Fontconfig error : Cannot load default config file : No such file : (null).
No output is created.

    


    I have installed FFmpeg full version and written this test script to add text onto an image which I drag and drop onto the BAT file.

    


    I searched this database for solutions and found none. The script should produce an output file test.png, The image should have red text on it which reads Hello.

    


    I tried to escape the path to the Font both ways without success :

    


    `set "FONT='c\:\\windows\\fonts\\arial.ttf'" :: Font


    


    `

    


    .. and

    


    `set "FONT='c\:\/windows\/fonts\/arial.ttf'" :: Font`


    


    My full script :

    


    `set "FONT='c\:\/windows\/fonts\/arial.ttf'" :: Font
set "TEXT=Hello" :: Text (no space characters allowed, see next example)
set "COLOR=red" :: Text color
set "SIZE=20" :: Font size
set "POS_X=(w-tw)/2" :: X position of text, use (w-tw)/2 for centering
set "POS_Y=(h-th)/2" :: Y position of text, use (h-th)/2 for centering


ffmpeg -i %1 -vf     drawtext='fontfile=%FONT%:text=%TEXT%:fontcolor=%COLOR%:fontsize=%SIZE%:x=%POS_X%:y=%POS_Y%' -  frames 1 -y test.png


pause`


    


    The complete result :
 C :\Users\canjm\Desktop\Image Correction 360\Archive
Testing\Utilities\Align Photo>set
    
"FONT='c :/windows/fonts/arial.ttf'" : : Font

    


    C:\Users\canjm\Desktop\Image Correction 360\Archive Testing\Utilities\Align Photo>set  "TEXT=Hello" :: Text (no space characters allowed, see next example)

C:\Users\canjm\Desktop\Image Correction 360\Archive Testing\Utilities\Align Photo>set "COLOR=red" :: Text color
C:\Users\canjm\Desktop\Image Correction 360\Archive Testing\Utilities\Align Photo>set "SIZE=20" :: Font size
C:\Users\canjm\Desktop\Image Correction 360\Archive Testing\Utilities\Align Photo>set "POS_X=(w-tw)/2" :: X position of text, use (w-tw)/2 for centering

C:\Users\canjm\Desktop\Image Correction 360\Archive Testing\Utilities\Align Photo>set "POS_Y=(h-th)/2" :: Y position of text, use (h-th)/2 for centering

C:\Users\canjm\Desktop\Image Correction 360\Archive Testing\Utilities\Align Photo>ffmpeg -i "C:\Users\canjm\Desktop\Image Correction 360\Archive Testing\Utilities\Align Photo\Eqr_360_9999.JPG" -vf drawtext='fontfile='c\:\/windows\/fonts\/arial.ttf':text=Hello:fontcolor=red:fontsize=20:x=(w-tw)/2:y=(h-th)/2' -frames 1 -y test.png


    


    ffmpeg version 2023-03-27-git-f7abe92bd7-full_build-
www.gyan.dev Copyright (c) 2000-2023 the FFmpeg developers
built with gcc 12.2.0 (Rev10, Built by MSYS2 project)
configuration : —enable-gpl —enable-version3 —enable-static
—disable-w32threads —disable-autodetect —enable-
fontconfig —enable-iconv —enable-gnutls —enable-libxml2 —
enable-gmp —enable-bzlib —enable-lzma —enable-libsnappy —
enable-zlib —enable-librist —enable-libsrt —enable-libssh
—enable-libzmq —enable-avisynth —enable-libbluray —
enable-libcaca —enable-sdl2 —enable-libaribb24 —enable-
libdav1d —enable-libdavs2 —enable-libuavs3d —enable-
libzvbi —enable-librav1e —enable-libsvtav1 —enable-libwebp
—enable-libx264 —enable-libx265 —enable-libxavs2 —enable-
libxvid —enable-libaom —enable-libjxl —enable-libopenjpeg
—enable-libvpx —enable-mediafoundation —enable-libass —
enable-frei0r —enable-libfreetype —enable-libfribidi —
enable-liblensfun —enable-libvidstab —enable-libvmaf —
enable-libzimg —enable-amf —enable-cuda-llvm —enable-cuvid
—enable-ffnvcodec —enable- nvdec —enable-nvenc —enable-
d3d11va —enable-dxva2 —enable-libvpl —enable-libshaderc —
enable-vulkan —enable-libplacebo - -enable-opencl —enable-
libcdio —enable-libgme —enable-libmodplug —enable-
libopenmpt —enable-libopencore-amrwb —enable-libmp3lame —
enable-libshine —enable-libtheora —enable-libtwolame —
enable-libvo-amrwbenc —enable-libilbc —enable-libgsm —
enable-libopencore-amrnb —enable-libopus —enable-libspeex -
-enable-libvorbis —enable-ladspa —enable-libbs2b —enable-
libflite —enable-libmysofa -tab —enable-libvmaf —enable-
libzimg —enable-amf —enable-cuda-llvm —enable-cuvid —
enable-ffnvcodec —enable-nvdec —enable-nvenc —enable-
d3d11va —enable-dxva2 —enable-libvpl —enable-libshaderc —
enable-vulkan —enable-libplacebo —enable-opencl —enable-
libcdio —enable-libgme —enable-libmodplug —enable-
libopenmpt —enable-libopencore-amrwb —enable-libmp3lame —
enable-libshine —enable-libtheora —enable-libtwolame —
enable-libvo-amrwbenc —enable-libilbc —enable-libgsm —
enable-libopencore-amrnb —enable-libopus —enable-libspeex -
-enable-libvorbis —enable-ladspa —enable-libbs2b —enable-
libflite —enable-libmysofa —enable-librubberband —enable-
libsoxr —enable-chromaprint libavutil 58. 5.100 / 58.
    
5.100 libavcodec 60. 7.100 / 60. 7.100 libavformat
    
60. 4.100 / 60. 4.100 libavdevice 60. 2.100 / 60.
    
2.100 libavfilter 9. 5.100 / 9. 5.100-enable-
librubberband —enable-libsoxr — enable-chromaprint
libavutil 58. 5.100 / 58. 5.100
libavcodec 60. 7.100 / 60. 7.100 Duration : 00:00:00.04,
start : 0.000000, bitrate : 95429 kb/s
Stream #0:0 : Video : mjpeg (Baseline), yuvj444p(pc,
bt470bg/unknown/unknown), 5792x2896, 25 fps, 25 tbr, 25 tbn
Stream mapping :
Stream #0:0 -> #0:0 (mjpeg (native) -> png (native))
Press [q] to stop, [?] for help
Fontconfig error : Cannot load default config file : No such
file : (null)

    


    C:\Users\canjm\Desktop\Image Correction 360\Archive 
Testing\Utilities\Align Photo>pause
Press any key to continue . . .``


    


  • How to config FFmpeg for xrgb and Aver Media capture card [closed]

    12 mai 2023, par Plotter Desalor

    I'm trying to use FFmpeg through ffplay to display a capture card output as lossless as possible.

    


    My capture card is named "Live Gamer Ultra-Video"

    


    In OBS, the NV12, YV12, P010 and YUY2 lead to blurriness around text and fine pixels edges, but the XRGB one offer clear output. So I've tried to focus on this mode with FFmpeg as the default one lead to same blurriness seen in OBS.

    


    Running "ffmpeg -f dshow -list_options true -i video="Live Gamer Ultra-Video" show me this result
(i've only kept line with wanted resolution)

    


    ffmpeg version 6.0-essentials_build-www.gyan.dev Copyright (c) 2000-2023 the FFmpeg developers
  built with gcc 12.2.0 (Rev10, Built by MSYS2 project)
  configuration: --enable-gpl --enable-version3 --enable-static --disable-w32threads --disable-autodetect --enable-fontconfig --enable-iconv --enable-gnutls --enable-libxml2 --enable-gmp --enable-bzlib --enable-lzma --enable-zlib --enable-libsrt --enable-libssh --enable-libzmq --enable-avisynth --enable-sdl2 --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxvid --enable-libaom --enable-libopenjpeg --enable-libvpx --enable-mediafoundation --enable-libass --enable-libfreetype --enable-libfribidi --enable-libvidstab --enable-libvmaf --enable-libzimg --enable-amf --enable-cuda-llvm --enable-cuvid --enable-ffnvcodec --enable-nvdec --enable-nvenc --enable-d3d11va --enable-dxva2 --enable-libvpl --enable-libgme --enable-libopenmpt --enable-libopencore-amrwb --enable-libmp3lame --enable-libtheora --enable-libvo-amrwbenc --enable-libgsm --enable-libopencore-amrnb --enable-libopus --enable-libspeex --enable-libvorbis --enable-librubberband
  libavutil      58.  2.100 / 58.  2.100
  libavcodec     60.  3.100 / 60.  3.100
  libavformat    60.  3.100 / 60.  3.100
  libavdevice    60.  1.100 / 60.  1.100
  libavfilter     9.  3.100 /  9.  3.100
  libswscale      7.  1.100 /  7.  1.100
  libswresample   4. 10.100 /  4. 10.100
  libpostproc    57.  1.100 / 57.  1.100
[dshow @ 00000240bf0eac40] DirectShow video device options (from video devices)
[dshow @ 00000240bf0eac40]  Pin "Capturer" (alternative pin name "0")
[dshow @ 00000240bf0eac40]   pixel_format=yuyv422  min s=2560x1440 fps=30 max s=2560x1440 fps=50
[dshow @ 00000240bf0eac40]   pixel_format=yuyv422  min s=2560x1440 fps=30 max s=2560x1440 fps=50 (tv, bt709/bt709/unknown, topleft)
[dshow @ 00000240bf0eac40]   pixel_format=yuv420p  min s=2560x1440 fps=30 max s=2560x1440 fps=60.0002
[dshow @ 00000240bf0eac40]   pixel_format=yuv420p  min s=2560x1440 fps=30 max s=2560x1440 fps=60.0002 (tv, bt709/bt709/unknown, topleft)
[dshow @ 00000240bf0eac40]   pixel_format=nv12  min s=2560x1440 fps=30 max s=2560x1440 fps=60.0002
[dshow @ 00000240bf0eac40]   pixel_format=nv12  min s=2560x1440 fps=30 max s=2560x1440 fps=60.0002 (tv, bt709/bt709/unknown, topleft)
[dshow @ 00000240bf0eac40]   unknown compression type 0xE436EB7D  min s=2560x1440 fps=30 max s=2560x1440 fps=30
[dshow @ 00000240bf0eac40]   unknown compression type 0xE436EB7D  min s=2560x1440 fps=30 max s=2560x1440 fps=30 (tv, bt709/bt709/unknown, topleft)
[dshow @ 00000240bf0eac40]   unknown compression type 0x30313050  min s=2560x1440 fps=30 max s=2560x1440 fps=30
[dshow @ 00000240bf0eac40]   unknown compression type 0x30313050  min s=2560x1440 fps=30 max s=2560x1440 fps=30 (tv, bt709/bt709/unknown, topleft)

video=Live Gamer Ultra-Video: Immediate exit requested


    


    "unknown compression type 0xE436EB7D" is a pretty bad start but from https://trac.ffmpeg.org/ticket/6279 I could figured out it was just unproperly parsed RGB24 format

    


    But if I run a very simple "ffplay -f dshow -i video="Live Gamer Ultra-Video" -pixel_format rgb24"
I got this output

    


    ffplay version 6.0-essentials_build-www.gyan.dev Copyright (c) 2003-2023 the FFmpeg developers
  built with gcc 12.2.0 (Rev10, Built by MSYS2 project)
  configuration: --enable-gpl --enable-version3 --enable-static --disable-w32threads --disable-autodetect --enable-fontconfig --enable-iconv --enable-gnutls --enable-libxml2 --enable-gmp --enable-bzlib --enable-lzma --enable-zlib --enable-libsrt --enable-libssh --enable-libzmq --enable-avisynth --enable-sdl2 --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxvid --enable-libaom --enable-libopenjpeg --enable-libvpx --enable-mediafoundation --enable-libass --enable-libfreetype --enable-libfribidi --enable-libvidstab --enable-libvmaf --enable-libzimg --enable-amf --enable-cuda-llvm --enable-cuvid --enable-ffnvcodec --enable-nvdec --enable-nvenc --enable-d3d11va --enable-dxva2 --enable-libvpl --enable-libgme --enable-libopenmpt --enable-libopencore-amrwb --enable-libmp3lame --enable-libtheora --enable-libvo-amrwbenc --enable-libgsm --enable-libopencore-amrnb --enable-libopus --enable-libspeex --enable-libvorbis --enable-librubberband
  libavutil      58.  2.100 / 58.  2.100
  libavcodec     60.  3.100 / 60.  3.100
  libavformat    60.  3.100 / 60.  3.100
  libavdevice    60.  1.100 / 60.  1.100
  libavfilter     9.  3.100 /  9.  3.100
  libswscale      7.  1.100 /  7.  1.100
  libswresample   4. 10.100 /  4. 10.100
  libpostproc    57.  1.100 / 57.  1.100
[dshow @ 000001ec3fa39300] Could not set video options   0B f=0/0
video=Live Gamer Ultra-Video: I/O error


    


    How could I use rgb format with this capture card ?

    


    If not possible, any other format leading to proper output would be ok too.
I've tried parameters from this topic Capture full-range/lossless rgb frame from capture card that supports NV12 and YUYV output without any good result sadly.

    


  • Why does a command in my Bash-script return 0 even when it fails ? Python, Whisper, ffmpeg

    10 juin 2024, par d-b

    I have a bash script that executes whisper on all sound files in a directory. Whisper uses ffmpeg to decode sound files to a format it can handle. One of the files in the directory was corrupt and caused ffmpeg to fail. The first time I executed my script it returned 1 when it hit that file but when I try to reproduce the error it always returns 0.

    


    Here is the log from the first run when 1 was returned :

    


    Traceback (most recent call last):&#xA;  File "/Users/db/Library/Python/3.11/lib/python/site-packages/whisper/audio.py", line 48, in load_audio&#xA;    .run(cmd=["ffmpeg", "-nostdin"], capture_stdout=True, capture_stderr=True)&#xA;     ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^&#xA;  File "/Users/db/Library/Python/3.11/lib/python/site-packages/ffmpeg/_run.py", line 325, in run&#xA;    raise Error(&#x27;ffmpeg&#x27;, out, err)&#xA;ffmpeg._run.Error: ffmpeg error (see stderr output for detail)&#xA;&#xA;The above exception was the direct cause of the following exception:&#xA;&#xA;Traceback (most recent call last):&#xA;  File "/Users/db/Library/Python/3.11/bin/whisper", line 8, in <module>&#xA;    sys.exit(cli())&#xA;             ^^^^^&#xA;  File "/Users/db/Library/Python/3.11/lib/python/site-packages/whisper/transcribe.py", line 437, in cli&#xA;    result = transcribe(model, audio_path, temperature=temperature, **args)&#xA;             ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^&#xA;  File "/Users/db/Library/Python/3.11/lib/python/site-packages/whisper/transcribe.py", line 121, in transcribe&#xA;    mel = log_mel_spectrogram(audio, padding=N_SAMPLES)&#xA;          ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^&#xA;  File "/Users/db/Library/Python/3.11/lib/python/site-packages/whisper/audio.py", line 130, in log_mel_spectrogram&#xA;    audio = load_audio(audio)&#xA;            ^^^^^^^^^^^^^^^^^&#xA;  File "/Users/db/Library/Python/3.11/lib/python/site-packages/whisper/audio.py", line 51, in load_audio&#xA;    raise RuntimeError(f"Failed to load audio: {e.stderr.decode()}") from e&#xA;RuntimeError: Failed to load audio: ffmpeg version 4.4.4 Copyright (c) 2000-2023 the FFmpeg developers&#xA;  built with Apple clang version 15.0.0 (clang-1500.1.0.2.5)&#xA;  configuration: --prefix=/opt/local --cc=/usr/bin/clang --mandir=/opt/local/share/man --enable-audiotoolbox --disable-indev=jack --disable-libjack --disable-libopencore-amrnb --disable-libopencore-amrwb --disable-libxcb --disable-libxcb-shm --disable-libxcb-xfixes --enable-opencl --disable-outdev=xv --enable-sdl2 --disable-securetransport --enable-videotoolbox --enable-avfilter --enable-avresample --enable-fontconfig --enable-gnutls --enable-libass --enable-libbluray --enable-libdav1d --enable-libfreetype --enable-libfribidi --enable-libmodplug --enable-libmp3lame --enable-libopenjpeg --enable-libopus --enable-librsvg --enable-libsoxr --enable-libspeex --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libzimg --enable-libzvbi --enable-lzma --enable-pthreads --enable-shared --enable-swscale --enable-zlib --enable-libaom --enable-libsvtav1 --arch=x86_64 --enable-x86asm --enable-gpl --enable-libvidstab --enable-libx264 --enable-libx265 --enable-libxvid --enable-postproc&#xA;  libavutil      56. 70.100 / 56. 70.100&#xA;  libavcodec     58.134.100 / 58.134.100&#xA;  libavformat    58. 76.100 / 58. 76.100&#xA;  libavdevice    58. 13.100 / 58. 13.100&#xA;  libavfilter     7.110.100 /  7.110.100&#xA;  libavresample   4.  0.  0 /  4.  0.  0&#xA;  libswscale      5.  9.100 /  5.  9.100&#xA;  libswresample   3.  9.100 /  3.  9.100&#xA;  libpostproc    55.  9.100 / 55.  9.100&#xA;/soundfile1.opus: Invalid data found when processing input&#xA;&#xA;&#xA;exit: 1 //this is my own output&#xA;</module>

    &#xA;

    and here is an example of when it returns 0 despite the input file is corrupt :

    &#xA;

    % whisper soundfile1.opus&#xA;&#xA;Traceback (most recent call last):&#xA;  File "/Users/db/Library/Python/3.11/lib/python/site-packages/whisper/audio.py", line 58, in load_audio&#xA;    out = run(cmd, capture_output=True, check=True).stdout&#xA;          ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^&#xA;  File "/opt/local/Library/Frameworks/Python.framework/Versions/3.11/lib/python3.11/subprocess.py", line 571, in run&#xA;    raise CalledProcessError(retcode, process.args,&#xA;subprocess.CalledProcessError: Command &#x27;[&#x27;ffmpeg&#x27;, &#x27;-nostdin&#x27;, &#x27;-threads&#x27;, &#x27;0&#x27;, &#x27;-i&#x27;, &#x27;soundfile1.opus&#x27;, &#x27;-f&#x27;, &#x27;s16le&#x27;, &#x27;-ac&#x27;, &#x27;1&#x27;, &#x27;-acodec&#x27;, &#x27;pcm_s16le&#x27;, &#x27;-ar&#x27;, &#x27;16000&#x27;, &#x27;-&#x27;]&#x27; returned non-zero exit status 1.&#xA;&#xA;The above exception was the direct cause of the following exception:&#xA;&#xA;Traceback (most recent call last):&#xA;  File "/Users/db/Library/Python/3.11/lib/python/site-packages/whisper/transcribe.py", line 597, in cli&#xA;    result = transcribe(model, audio_path, temperature=temperature, **args)&#xA;             ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^&#xA;  File "/Users/db/Library/Python/3.11/lib/python/site-packages/whisper/transcribe.py", line 133, in transcribe&#xA;    mel = log_mel_spectrogram(audio, model.dims.n_mels, padding=N_SAMPLES)&#xA;          ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^&#xA;  File "/Users/db/Library/Python/3.11/lib/python/site-packages/whisper/audio.py", line 140, in log_mel_spectrogram&#xA;    audio = load_audio(audio)&#xA;            ^^^^^^^^^^^^^^^^^&#xA;  File "/Users/db/Library/Python/3.11/lib/python/site-packages/whisper/audio.py", line 60, in load_audio&#xA;    raise RuntimeError(f"Failed to load audio: {e.stderr.decode()}") from e&#xA;RuntimeError: Failed to load audio: ffmpeg version 4.4.4 Copyright (c) 2000-2023 the FFmpeg developers&#xA;  built with Apple clang version 15.0.0 (clang-1500.1.0.2.5)&#xA;  configuration: --prefix=/opt/local --cc=/usr/bin/clang --mandir=/opt/local/share/man --enable-audiotoolbox --disable-indev=jack --disable-libjack --disable-libopencore-amrnb --disable-libopencore-amrwb --disable-libxcb --disable-libxcb-shm --disable-libxcb-xfixes --enable-opencl --disable-outdev=xv --enable-sdl2 --disable-securetransport --enable-videotoolbox --enable-avfilter --enable-avresample --enable-fontconfig --enable-gnutls --enable-libass --enable-libbluray --enable-libdav1d --enable-libfreetype --enable-libfribidi --enable-libmodplug --enable-libmp3lame --enable-libopenjpeg --enable-libopus --enable-librsvg --enable-libsoxr --enable-libspeex --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libzimg --enable-libzvbi --enable-lzma --enable-pthreads --enable-shared --enable-swscale --enable-zlib --enable-libaom --enable-libsvtav1 --arch=x86_64 --enable-x86asm --enable-gpl --enable-libvidstab --enable-libx264 --enable-libx265 --enable-libxvid --enable-postproc&#xA;  libavutil      56. 70.100 / 56. 70.100&#xA;  libavcodec     58.134.100 / 58.134.100&#xA;  libavformat    58. 76.100 / 58. 76.100&#xA;  libavdevice    58. 13.100 / 58. 13.100&#xA;  libavfilter     7.110.100 /  7.110.100&#xA;  libavresample   4.  0.  0 /  4.  0.  0&#xA;  libswscale      5.  9.100 /  5.  9.100&#xA;  libswresample   3.  9.100 /  3.  9.100&#xA;  libpostproc    55.  9.100 / 55.  9.100&#xA;soundfile1.opus: Invalid data found when processing input&#xA;&#xA;Skipping soundfile1.opus due to RuntimeError: Failed to load audio: ffmpeg version 4.4.4 Copyright (c) 2000-2023 the FFmpeg developers&#xA;  built with Apple clang version 15.0.0 (clang-1500.1.0.2.5)&#xA;  configuration: --prefix=/opt/local --cc=/usr/bin/clang --mandir=/opt/local/share/man --enable-audiotoolbox --disable-indev=jack --disable-libjack --disable-libopencore-amrnb --disable-libopencore-amrwb --disable-libxcb --disable-libxcb-shm --disable-libxcb-xfixes --enable-opencl --disable-outdev=xv --enable-sdl2 --disable-securetransport --enable-videotoolbox --enable-avfilter --enable-avresample --enable-fontconfig --enable-gnutls --enable-libass --enable-libbluray --enable-libdav1d --enable-libfreetype --enable-libfribidi --enable-libmodplug --enable-libmp3lame --enable-libopenjpeg --enable-libopus --enable-librsvg --enable-libsoxr --enable-libspeex --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libzimg --enable-libzvbi --enable-lzma --enable-pthreads --enable-shared --enable-swscale --enable-zlib --enable-libaom --enable-libsvtav1 --arch=x86_64 --enable-x86asm --enable-gpl --enable-libvidstab --enable-libx264 --enable-libx265 --enable-libxvid --enable-postproc&#xA;  libavutil      56. 70.100 / 56. 70.100&#xA;  libavcodec     58.134.100 / 58.134.100&#xA;  libavformat    58. 76.100 / 58. 76.100&#xA;  libavdevice    58. 13.100 / 58. 13.100&#xA;  libavfilter     7.110.100 /  7.110.100&#xA;  libavresample   4.  0.  0 /  4.  0.  0&#xA;  libswscale      5.  9.100 /  5.  9.100&#xA;  libswresample   3.  9.100 /  3.  9.100&#xA;  libpostproc    55.  9.100 / 55.  9.100&#xA;soundfile1.opus: Invalid data found when processing input&#xA;&#xA;% echo $?&#xA;0&#xA;

    &#xA;

    When I try to reproduce the behaviour I have both tried to execute the script as well as just running the actual line of code from the command prompt. The actual script looks like this :

    &#xA;

    if whisper "$file" >> "${directory}/../${transdir}/${name}.txt"; then&#xA;    whispersuccess=$?&#xA;    echo "exit code $whispersuccess"&#xA;else&#xA;    whispersuccess=$?&#xA;    echo "exit code: $whispersuccess"&#xA;

    &#xA;

    I want it to return ¬0 when something like this happens. How do I achieve this ?

    &#xA;

Navigation