Recherche avancée

Sur d’autres sites (6908)

• Streaming using FFMPEG and custom codec

  6 février 2023, par sam

  I'm new to streaming in FFMPEG. I have integrated a custom video decoder into FFMPEG's multimedia framework.

  



  So, when i give the command :

  



  ffmpeg -vcodec myCodec -i input.bin output.yuv


  



  It generate a output yuv file. So this means that i have properly integrated my codec to FFMPEG's multimedia framework.

  



  So, now if i want to stream a video using my custom decoder, how do i proceed ? and for demonstrating both client and server on the same machine, what are the commands i shall use ? I Think, since we have integrated custom codec properly, we don't need to modify any other thing. However, for streaming using custom decoder if i need to perform any changes in FFMPEG ?

  



  Thanks in advance.

  


• FFMPEG — using 'amix' to combine short audio clip with a video results in final video's sound cutting off early

  12 avril 2022, par kilika

  I am trying to combine the following :

  


  (a) : 29s video clip that has its own audio that lasts the entire duration

  


  (b) : audio clip I want to play at the start of the video, in conjunction with original audio, and is 2 seconds long

  


  I successfully use 'amix' to obtain a video at the end with combined audio, but the problem is that the final video's audio cuts off at around 26 out of the 29 seconds of the video and goes silent.

  


  What doesn't make any sense is that the resulting video plays as it should, with the audio successfully mixed. But the output video's audio stream loses the last 3 seconds.

  


  Here's the 'amix' command I'm using (sending via subprocess) :

  


  subprocess.call(['ffmpeg','-i', input.mp4', '-i', "audioclip.mp3", '-filter_complex', 'amix', output.mp4'])


  


  I've also used versions of this command that spell out the -map "0:a" and -map "1:a", or tried using 'amix=inputs=2:duration:longest' among many other additions. All lead to the same problem : the final combined video's audio drops out with 3 seconds remaining in the video, even though the initial 'input.mp4' video has a full 29 out of 29 seconds of audio.

  


  Does anyone know why these last several seconds of audio from [a] are missing in the final video ?

  


  _________________________________________________________________

  


  edit : Below is my output when I run the amix command listed above :

  


  Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'RuneBearinstakill_advanced.mp4':
  Metadata:
    major_brand     : isom
    minor_version   : 512
    compatible_brands: isomiso2avc1mp41
    encoder         : Lavf59.20.101
  Duration: 00:00:29.77, start: 0.000000, bitrate: 5441 kb/s
  Stream #0:0[0x1](eng): Video: h264 (High) (avc1 / 0x31637661), yuv420p(tv, bt470bg/bt470bg/smpte170m, progressive), 1920x1080 [SAR 1:1 DAR 16:9], 5304 kb/s, 30 fps, 30 tbr, 15360 tbn (default)
    Metadata:
      handler_name    : Bento4 Video Handler
      vendor_id       : [0][0][0][0]
  Stream #0:1[0x2](eng): Audio: aac (LC) (mp4a / 0x6134706D), 48000 Hz, stereo, fltp, 128 kb/s (default)
    Metadata:
      handler_name    : Bento4 Sound Handler
      vendor_id       : [0][0][0][0]
[mp3 @ 000001f0c8ec2040] Estimating duration from bitrate, this may be inaccurate
Input #1, mp3, from 'TTS_clip.mp3':
  Duration: 00:00:01.90, start: 0.000000, bitrate: 32 kb/s
  Stream #1:0: Audio: mp3, 24000 Hz, mono, fltp, 32 kb/s
Stream mapping:
  Stream #0:1 (aac) -> amix (graph 0)
  Stream #1:0 (mp3float) -> amix (graph 0)
  amix:default (graph 0) -> Stream #0:0 (aac)
  Stream #0:0 -> #0:1 (h264 (native) -> h264 (libx264))
Press [q] to stop, [?] for help
[libx264 @ 000001f0c8cbe5c0] using SAR=1/1
[libx264 @ 000001f0c8cbe5c0] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 BMI2 AVX2
[libx264 @ 000001f0c8cbe5c0] profile High, level 4.0, 4:2:0, 8-bit
[libx264 @ 000001f0c8cbe5c0] 264 - core 164 r3094 bfc87b7 - H.264/MPEG-4 AVC codec - Copyleft 2003-2022 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=24 lookahead_threads=4 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
Output #0, mp4, to 'RuneBearinstakill_advancedwithtts.mp4':
  Metadata:
    major_brand     : isom
    minor_version   : 512
    compatible_brands: isomiso2avc1mp41
    encoder         : Lavf59.20.101
  Stream #0:0: Audio: aac (LC) (mp4a / 0x6134706D), 48000 Hz, stereo, fltp, 128 kb/s
    Metadata:
      encoder         : Lavc59.25.100 aac
  Stream #0:1(eng): Video: h264 (avc1 / 0x31637661), yuv420p(tv, bt470bg/bt470bg/smpte170m, progressive), 1920x1080 [SAR 1:1 DAR 16:9], q=2-31, 30 fps, 15360 tbn (default)
    Metadata:
      handler_name    : Bento4 Video Handler
      vendor_id       : [0][0][0][0]
      encoder         : Lavc59.25.100 libx264
    Side data:
      cpb: bitrate max/min/avg: 0/0/0 buffer size: 0 vbv_delay: N/A
frame=  893 fps=110 q=-1.0 Lsize=   18717kB time=00:00:29.66 bitrate=5168.5kbits/s speed=3.66x    
video:18256kB audio:433kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 0.150179%
[aac @ 000001f0c8f9ebc0] Qavg: 921.259
[libx264 @ 000001f0c8cbe5c0] frame I:4     Avg QP:21.33  size: 71366
[libx264 @ 000001f0c8cbe5c0] frame P:633   Avg QP:23.32  size: 23837
[libx264 @ 000001f0c8cbe5c0] frame B:256   Avg QP:25.22  size: 12968
[libx264 @ 000001f0c8cbe5c0] consecutive B-frames: 57.2% 10.3% 10.1% 22.4%
[libx264 @ 000001f0c8cbe5c0] mb I  I16..4: 17.9% 71.4% 10.8%
[libx264 @ 000001f0c8cbe5c0] mb P  I16..4:  6.9% 17.6%  0.8%  P16..4: 43.1%  6.5%  1.5%  0.0%  0.0%    skip:23.6%
[libx264 @ 000001f0c8cbe5c0] mb B  I16..4:  1.5%  4.2%  0.3%  B16..8: 39.7%  4.6%  0.5%  direct: 1.6%  skip:47.6%  L0:55.9% L1:41.8% BI: 2.3%
[libx264 @ 000001f0c8cbe5c0] 8x8 transform intra:69.5% inter:87.3%
[libx264 @ 000001f0c8cbe5c0] coded y,uvDC,uvAC intra: 35.6% 26.8% 0.8% inter: 13.4% 10.8% 0.0%
[libx264 @ 000001f0c8cbe5c0] i16 v,h,dc,p: 21% 37% 12% 30%
[libx264 @ 000001f0c8cbe5c0] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 25% 26% 21%  4%  5%  5%  6%  4%  5%
[libx264 @ 000001f0c8cbe5c0] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 24% 28% 15%  5%  7%  7%  7%  5%  4%
[libx264 @ 000001f0c8cbe5c0] i8c dc,h,v,p: 67% 18% 14%  1%
[libx264 @ 000001f0c8cbe5c0] Weighted P-Frames: Y:0.2% UV:0.0%
[libx264 @ 000001f0c8cbe5c0] ref P L0: 72.3% 15.4%  8.7%  3.6%  0.0%
[libx264 @ 000001f0c8cbe5c0] ref B L0: 88.9%  9.5%  1.6%
[libx264 @ 000001f0c8cbe5c0] ref B L1: 97.7%  2.3%
[libx264 @ 000001f0c8cbe5c0] kb/s:5024.13


  


  And here is the output when I check the stream durations for the input video and the output video, showing how the output video's audio stream is somehow reduced by several seconds after the amix :

  


  Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'RuneBearinstakill_advanced.mp4':
  Metadata:
    major_brand     : isom
    minor_version   : 512
    compatible_brands: isomiso2avc1mp41
    encoder         : Lavf59.20.101
  Duration: 00:00:29.77, start: 0.000000, bitrate: 5403 kb/s
  Stream #0:0[0x1](eng): Video: h264 (High) (avc1 / 0x31637661), yuv420p(tv, bt470bg/bt470bg/smpte170m, progressive), 1920x1080 [SAR 1:1 DAR 16:9], 5266 kb/s, 30 fps, 30 tbr, 15360 tbn (default)
    Metadata:
      handler_name    : Bento4 Video Handler
      vendor_id       : [0][0][0][0]
  Stream #0:1[0x2](eng): Audio: aac (LC) (mp4a / 0x6134706D), 48000 Hz, stereo, fltp, 128 kb/s (default)
    Metadata:
      handler_name    : Bento4 Sound Handler
      vendor_id       : [0][0][0][0]
[STREAM]
duration=29.766667
[/STREAM]
[STREAM]
duration=29.738000
[/STREAM]

Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'RuneBearinstakill_advancedwithtts.mp4':
  Metadata:
    major_brand     : isom
    minor_version   : 512
    compatible_brands: isomiso2avc1mp41
    encoder         : Lavf59.20.101
  Duration: 00:00:29.77, start: 0.000000, bitrate: 5098 kb/s
  Stream #0:0[0x1](und): Audio: aac (LC) (mp4a / 0x6134706D), 48000 Hz, stereo, fltp, 128 kb/s (default)
    Metadata:
      handler_name    : SoundHandler
      vendor_id       : [0][0][0][0]
  Stream #0:1[0x2](eng): Video: h264 (High) (avc1 / 0x31637661), yuv420p(tv, bt470bg/bt470bg/smpte170m, progressive), 1920x1080 [SAR 1:1 DAR 16:9], 4971 kb/s, 30 fps, 30 tbr, 15360 tbn (default)
    Metadata:
      handler_name    : Bento4 Video Handler
      vendor_id       : [0][0][0][0]
[STREAM]
duration=27.477000
[/STREAM]
[STREAM]
duration=29.766667


  


• System reboots during ffmpeg tool installation

  11 novembre 2016, par JeeBoomBaa

  I have enabled QSV with reference of the streambuilder’s enabling-iqsv docs.

  MACHINE DETAILS

  Server : Intel(R) Xeon(R) CPU E3-1285 v4 3.50GHz w/ Supermicro X10SLH-F

  Kernel : Linux 3.10.0-229.1.2.44985.MSSr7.el7.centos.x86_64 #1 SMP Wed Nov 9 16:26:25 PST 2016 x86_64 x86_64 x86_64 GNU/Linux

  I have installed ffmpeg with —enable-nonfree —enable-libmfx configurations, configuration command was successfully done.Then, I invoke make and our server gets hanged in few seconds and it will gets rebooted automatically.

  I feel it might be compilation issue with make script.

  ./configure --prefix="/usr/ffmpeg" --extra-cflags="-I$HOME/ffmpeg_build/include" --extra-ldflags="-L$HOME/ffmpeg_build/lib" --bindir="$HOME/bin" --pkg-config-flags="--static" --enable-nonfree --enable-libmfx
  
  make 
  
  --- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=2068, si_status=0, si_utime=0, si_stime=0} ---
  
  rt_sigreturn()                          = 2068
  
  rt_sigprocmask(SIG_BLOCK, [HUP INT QUIT TERM XCPU XFSZ], NULL, 8) = 0
  
  rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
  
  stat("libavcodec/intrax8dsp.o", {st_mode=S_IFREG|0644, st_size=82840, ...}) = 0
  
  stat("libavcodec/ituh263dec.o", 0x7ffff86affb0) = -1 ENOENT (No such file or directory)
  
  stat("libavcodec/ituh263dec.c", {st_mode=S_IFREG|0644, st_size=38617, ...}) = 0
  
  rt_sigprocmask(SIG_BLOCK, [HUP INT QUIT TERM XCPU XFSZ], NULL, 8) = 0
  
  vfork()                                 = 2072
  
  rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
  
  wait4(-1, CC libavcodec/ituh263dec.o

  I have attached config.log and FFMPEG-MAKE-TRACE.log file.