Recherche avancée
Autres articles (76)
-
Amélioration de la version de base
13 septembre 2013Jolie sélection multiple
Le plugin Chosen permet d’améliorer l’ergonomie des champs de sélection multiple. Voir les deux images suivantes pour comparer.
Il suffit pour cela d’activer le plugin Chosen (Configuration générale du site > Gestion des plugins), puis de configurer le plugin (Les squelettes > Chosen) en activant l’utilisation de Chosen dans le site public et en spécifiant les éléments de formulaires à améliorer, par exemple select[multiple] pour les listes à sélection multiple (...) -
Demande de création d’un canal
12 mars 2010, parEn fonction de la configuration de la plateforme, l’utilisateur peu avoir à sa disposition deux méthodes différentes de demande de création de canal. La première est au moment de son inscription, la seconde, après son inscription en remplissant un formulaire de demande.
Les deux manières demandent les mêmes choses fonctionnent à peu près de la même manière, le futur utilisateur doit remplir une série de champ de formulaire permettant tout d’abord aux administrateurs d’avoir des informations quant à (...) -
Menus personnalisés
14 novembre 2010, parMediaSPIP utilise le plugin Menus pour gérer plusieurs menus configurables pour la navigation.
Cela permet de laisser aux administrateurs de canaux la possibilité de configurer finement ces menus.
Menus créés à l’initialisation du site
Par défaut trois menus sont créés automatiquement à l’initialisation du site : Le menu principal ; Identifiant : barrenav ; Ce menu s’insère en général en haut de la page après le bloc d’entête, son identifiant le rend compatible avec les squelettes basés sur Zpip ; (...)
Sur d’autres sites (13416)
-
CMD Batch Variable Won't Save FFprobe Output
15 juillet 2017, par Matt McManisI have an CMD Batch Script that will convert a folder of mp4 videos to webm.
You will need :
- FFmpeg/FFprobe installed and set in Environment Variables to run from CMD.
- A folder with an mp4 for FFprobe to parse.
To make it easy, this is only the first part of the script, showing the
Video Bitratevariable.Here is a full script, just replace the paths.
https://pastebin.com/raw/3ng77ExzHow the Script works :
- Loops through all videos in folder
- Has FFprobe parse the Video’s Bitrate and save it to
%Vand
%vBitrate%. - Has FFmpeg use
%V. Such as-b:v %Vwill become the parsed value
-b:v 9401k. - Converts each video from mp4 to webm using the parsed Bitrate
Problem
I can’t get FFprobe’s Output to save to the variable. I’ve come up with a workaround, having it first save the bitrate value to a
temp file, then import that to the%vBitrate%variable.Example :
(%V > tmp_vBitrate) & SET /p vBitrate= < tmp_vBitrate.
Works
Temp File Variable
cd "C:\Users\Matt\Videos\" && for %f in (*.mp4) do ffprobe -i "C:\Users\Matt\Desktop\Test\%~f" -select_streams v:0 -show_entries stream=bit_rate -v quiet -of csv="p=0" & for /f "tokens=*" %V in ("ffprobe -i "%~f" -select_streams v:0 -show_entries stream=bit_rate -v quiet -of csv=p=0") do (echo ) & (%V > tmp_vBitrate) & SET /p vBitrate= < tmp_vBitrate & del tmp_vBitrate & for /F %V in ('echo %vBitrate%') do (echo %V)
Does Not Work
Memory Variable
cd "C:\Users\Matt\Videos\" && for %f in (*.mp4) do ffprobe -i "C:\Users\Matt\Desktop\Test\%~f" -select_streams v:0 -show_entries stream=bit_rate -v quiet -of csv="p=0" & for /f "tokens=*" %V in ("ffprobe -i "%~f" -select_streams v:0 -show_entries stream=bit_rate -v quiet -of csv=p=0") do (echo ) & SET vBitrate=%V & for /F %V in ('echo %vBitrate%') do (echo %V)
Testing It
Run the first command. When it is finished, type
echo %vBitrate%in CMD and press Enter. You’ll see the bitrate of the last mp4 file parsed.Do the same for the second command and you’ll see it doesn’t work.
Solution
I would like to get rid of the
Temp File Variableand get the second command to work.(%V > tmp_vBitrate) & SET /p vBitrate= < tmp_vBitrateto justSET vBitrate=%V.Maybe this whole thing can be simplified ? Am I using the variables wrong ?
-
Problem : FFmpeg and C++ extract and save frame
26 mai 2021, par Simba_cl25I am doing a project where I must do the following : extract frames (along with the associated metadata - KLV) from a video given a period (for the moment every 10 seconds).
I have followed codes found on internet but I get an error that I can find a solution to.


extern "C" {
#include <libavcodec></libavcodec>avcodec.h>
#include <libavformat></libavformat>avformat.h>
#include <libavdevice></libavdevice>avdevice.h>
#include <libswscale></libswscale>swscale.h>
#include <libavfilter></libavfilter>avfilter.h>
#include <libswresample></libswresample>swresample.h>
#include <libavutil></libavutil>avutil.h>
#include <libavutil></libavutil>imgutils.h> 
}

static void SaveFrame(AVFrame *pFrame, int width, int height, int iFrame);


int main(int argc, const char * argv[])
{
 AVFormatContext *pFormatCtx;
 int i, videoStream;
 AVCodecContext *pCodecCtx = NULL;
 const AVCodec *pCodec = NULL;
 AVFrame *pFrame;
 AVFrame *pFrameRGB;
 AVPacket *packet = av_packet_alloc();
 AVStream *pStream;
 int numBytes;
 int64_t Duration;
 uint8_t *buffer;
 bool frameFinished = false;

 // Open video file - check for errors
 pFormatCtx = 0;
 if (avformat_open_input(&pFormatCtx, "00Video\\VideoR.ts", 0, 0) != 0)
 return -1; 

 if (avformat_find_stream_info(pFormatCtx, 0) < 0)
 return -1;

 if (av_find_best_stream(pFormatCtx, AVMEDIA_TYPE_VIDEO, -1, -1, 0, 0) <0)
 return -1;

 av_dump_format(pFormatCtx, 0, "00Video\\VideoR.ts", false);


 // Find the first video stream
 videoStream = -1;
 for (i = 0; i < pFormatCtx->nb_streams; i++)
 if (pFormatCtx->streams[i]->codecpar->codec_type == AVMEDIA_TYPE_VIDEO)
 {
 videoStream = i;
 break;
 }
 if (videoStream == -1)
 return -1; 
 


 // Find the decoder for the video stream
 pCodec = avcodec_find_decoder(pFormatCtx->streams[videoStream]->codecpar->codec_id);
 pCodecCtx = avcodec_alloc_context3(pCodec);

 if (pCodec == NULL)
 {
 fprintf(stderr, "Codec not found\n");
 return -1; 
 }


 if (avcodec_open2(pCodecCtx, pCodec, NULL) < 0)
 {
 fprintf(stderr, "Could not open codec\n");
 return -1; 
 }

 // Hack to correct wrong frame rates that seem to be generated by some codecs
 if (pCodecCtx->time_base.num > 1000 && pCodecCtx->time_base.den == 1)
 pCodecCtx->time_base.den = 1000;




 // Allocate video frame - original frame 
 pFrame = av_frame_alloc();

 if (!pFrame) {
 fprintf(stderr, "Could not allocate video frame\n");
 return -1;
 }


 // Allocate an AVFrame structure
 pFrameRGB = av_frame_alloc();

 if (pFrameRGB == NULL)
 {
 fprintf(stderr, "Could not allocate video RGB frame\n");
 return -1;
 }

 
 Duration = av_rescale_q(vstrm->duration, vstrm->time_base, { 1,1000 });
 
 numBytes = av_image_get_buffer_size(pCodecCtx->pix_fmt, pCodecCtx->width, pCodecCtx->height, 0);
 buffer = (uint8_t*)av_malloc(numBytes * sizeof(uint8_t));


 av_image_fill_arrays(pFrameRGB->data, pFrameRGB->linesize, buffer, AV_PIX_FMT_RGB24, pCodecCtx->width, pCodecCtx->height, 1);
 
 
 
 
 i = 0;
 while (av_read_frame(pFormatCtx, packet) >= 0)
 {
 // Is this a packet from the video stream?
 if (packet->stream_index == videoStream)
 {
 int ret;
 ret = avcodec_send_packet(pCodecCtx, packet);
 if (ret < 0 || ret == AVERROR(EAGAIN) || ret == AVERROR_EOF) {
 fprintf(stderr, "Error sending a packet for decoding\n");
 //break;
 }
 while (ret >= 0) {
 ret = avcodec_receive_frame(pCodecCtx, pFrame);
 if (ret == AVERROR(EAGAIN) || ret == AVERROR_EOF)
 return -1;
 else if (ret < 0) {
 fprintf(stderr, "Error during decoding\n");
 return -1;
 frameFinished = true;
 }


 // Did we get a video frame?
 if (frameFinished)
 {
 static struct SwsContext *img_convert_ctx;

 
 if (img_convert_ctx == NULL) {
 int w = pCodecCtx->width;
 int h = pCodecCtx->height;
 img_convert_ctx = sws_getContext(w, h,
 pCodecCtx->pix_fmt,
 w, h, AV_PIX_FMT_RGB24, SWS_FAST_BILINEAR,
 NULL, NULL, NULL);

 if (img_convert_ctx == NULL) {
 fprintf(stderr, "Cannot initialize the conversion context!\n");
 exit(1);
 }
 }

 int ret = sws_scale(img_convert_ctx, pFrame->data, pFrame->linesize, 0,
 pCodecCtx->height, pFrameRGB->data, pFrameRGB->linesize);


 // Save the frame to disk
 if (i <= Duration)
 {
 SaveFrame(pFrameRGB, pCodecCtx->width, pCodecCtx->height, i);
 i += 10*1000;
 }
 }
 }

 
 }

 // Free the packet that was allocated by av_read_frame
 av_packet_unref(packet);
 }

 

 // Free the RGB image
 free(buffer);
 av_free(pFrameRGB);

 // Free the YUV frame
 av_free(pFrame);

 // Close the codec
 avcodec_close(pCodecCtx);

 // Close the video file
 avformat_close_input(&pFormatCtx);
 return 0;
 
}




static void SaveFrame(AVFrame *pFrame, int width, int height, int iFrame)
{
 FILE *pFile;
 char szFilename[32];
 int y;


 // Open file
 sprintf(szFilename, "Im\\frame%d.png", iFrame);
 pFile = fopen(szFilename, "wb");
 if (pFile == NULL)
 return;

 // Write header
 fprintf(pFile, "P6\n%d %d\n255\n", width, height);
 // Write pixel data
 for (y = 0; y < height; y++)
 fwrite(pFrame->data[0] + y * pFrame->linesize[0], 1, width*3, pFile);

 // Close file
 fclose(pFile);
}


The error I get is :


[swscaler @ 03055A80] bad dst image pointers


I think is because


numBytes = av_image_get_buffer_size(pCodecCtx->pix_fmt, pCodecCtx->width, pCodecCtx->height, 0);


Returns a negative value ( -22) but I don't know why.


Thanks,


-
How to save last 30 seconds of video in py
5 juin 2024, par Mateus CoelhoI want the last 30 seconds to be recorded every time I click enter and sent to the cloud. for example, if I click at 00:10:30, I want a video that records from 00:10:00 to 00:10:30 and if I click in sequence at 00:10:32, I need another different video that in its content is recorded from 00:10:02 to 00:10:32.


I think I have a problem where I will always end up recovering from the same buffer in the last 30 seconds. Is there any approach so that whenever I click enter I retrieve a unique video ? Is my current approach the best for the problem ? Or should I use something else ?


import subprocess
import os
import keyboard
from datetime import datetime
from google.cloud import storage

# Configuration
STATE = "mg"
CITY = "belohorizonte"
COURT = "duna"
RTSP_URL = "rtsp://Apertai:130355va@192.168.0.2/stream1"
BUCKET_NAME = "apertai-cloud"
CREDENTIALS_PATH = "C:/Users/Abidu/ApertAI/key.json"

def start_buffer_stream():
 # Command for continuous buffer that overwrites itself every 30 seconds
 buffer_command = [
 'ffmpeg',
 '-i', RTSP_URL,
 '-map', '0',
 '-c', 'copy',
 '-f', 'segment',
 '-segment_time', '30', # Duration of each segment
 '-segment_wrap', '2', # Number of segments to wrap around
 '-reset_timestamps', '1', # Reset timestamps at the start of each segment
 'buffer-%03d.ts' # Save segments with a numbering pattern
 ]
 return subprocess.Popen(buffer_command, stdout=subprocess.PIPE, stderr=subprocess.PIPE)

def save_last_30_seconds_from_buffer(buffer_file):
 datetime_now = datetime.now()
 datetime_now_formatted = f"{datetime_now.day:02}{datetime_now.month:02}{datetime_now.year}-{datetime_now.hour:02}{datetime_now.minute:02}"
 output_file_name = os.path.abspath(f"{STATE}-{CITY}-{COURT}-{datetime_now_formatted}.mp4")

 # Copy the most recent buffer segment to the output file
 save_command = [
 'ffmpeg',
 '-i', buffer_file,
 '-c', 'copy',
 output_file_name
 ]
 subprocess.run(save_command, check=True)
 print(f"Saved last 30 seconds: {output_file_name}")
 return output_file_name

def upload_to_google_cloud(file_name):
 client = storage.Client.from_service_account_json(CREDENTIALS_PATH)
 bucket = client.bucket(BUCKET_NAME)
 blob = bucket.blob(os.path.basename(file_name).replace("-", "/"))
 blob.upload_from_filename(file_name, content_type='application/octet-stream')
 print(f"Uploaded {file_name} to {BUCKET_NAME}")
 os.remove(file_name) # Clean up the local file

def main():
 print("Starting continuous buffer for RTSP stream...")
 start_time = datetime.now()
 buffer_process = start_buffer_stream()
 print("Press 'Enter' to save the last 30 seconds of video...")

 while True:
 # Verify if 30 seconds has passed since start
 if keyboard.is_pressed('enter'):
 print("Saving last 30 seconds of video...")
 elapsed_time = (datetime.now() - start_time).total_seconds()
 # Determine which buffer segment to save
 if elapsed_time % 60 < 30:
 buffer_file = 'buffer-000.ts'
 else:
 buffer_file = 'buffer-001.ts'
 final_video = save_last_30_seconds_from_buffer(buffer_file)
 upload_to_google_cloud(final_video)

if _name_ == "_main_":
 main()




Syndiquer tout le site
