Recherche avancée

Sur d’autres sites (6394)

• Expand (extend) a video to an specific duration

  8 février 2013, par BorrajaX

  Do VLC or FFmpeg (or AVconv) have any feature to force the duration of a video to a certain number of seconds ?

  Let's say I have a... 5 minutes .mp4 video (without audio). Is there a way to have any of the aforementioned tools "expanding" the video to a longer duration ? The video comes from a Power Point slideshow, but it's too short (running too fast, to say so). The idea would be automatically inserting frames so it reaches an specified duration. It looks like something pretty doable (erm... for a total newbie in video encoding/transcoding as I am) : A 5 minutes video, at 30fps means I have 9000 frames... To make it be 10 times longer, get the first "real" frame, copy it ten times, then get the second "real" frame, copy it ten times... and so on.

  I'm using Ubuntu 12.04, but I can install/compile any required software, if needed. So far, I have VLC, AVConv and FFmpeg (FFmpeg in an specific folder, so it won't conflict with AVConv)

  Thank you in advance.

• FFmpeg missed packets (from time to time) while copying RTP stream to file

  1er septembre 2017, par Gnitry

  I have and RTP video broadcast stream (using NOVUS – H.264 / MPEG-4 HD/SD Broadcast Encoder). And I have a Windows Server 2012 (Intel Xeon E5-2690, 128Gb RAM) with service which is recording this stream to file (using lastest FFmpeg, calling it as external process). Every 2-5 minutes recording stops and starts again to a new file.

  From time to time there are significant (and not) lags in video. At most these lags are at the beginning file, sometimes in the center/end. Regarding log there are missed packets.

  It could be network problems, but :

  I ran manually from console in parallel another instance of ffmpeg and started to record the same broadcast stream with segmentation by time. And in this case recording is very good (missed packets 1..5 very very rarely), no lags. At moments, when the first ffmpeg records the second ffmpeg has no problems.

  What could be the reason of this behavior ? Two ffmpeg instances run in parallel and read the same udp input, but the first misses packets when the second feels good. No memory problems, no hdd problems, no CPU overload. I also tried to set highest priority of the first ffmpeg process, but it didn’t help. The only difference between them I see is that first ffmpeg is run from service, and the second is run from from local administrator. To be honest, I used vlc as recorder before, but it had the same problems too... And I can surely say that video stream is ok, because it is played in VLC player 24h/day on another PC without lags...

  That is how I run ffmpeg from windows service (C#) :

  _process = new Process();
  
  var startInfo = new ProcessStartInfo(@"ffmpeg\ffmpeg.exe");
  
  startInfo.UseShellExecute = false;
  
  startInfo.RedirectStandardInput = true;
  
  startInfo.Arguments = "-loglevel debug -y -ss 1 -i \"" + _url + "\" -vcodec copy -y -an \"" + _outputFileName + "\"";
  
  startInfo.CreateNoWindow = true;

  Command to record video automatically from windows service :

  ffmpeg.exe -loglevel debug -y -ss 1 -i "rtp://225.1.1.1:1024" -vcodec copy -y -an "Session-021221.ts"

  Command to record video manually.

  D:\ffmpeg\ffmpeg -i "rtp://225.1.1.1:1024" -vcodec copy -an -f segment -strftime 1 -segment_time 300 "novus-%Y-%m-%d_%H-%M-%S.ts"

  This is part of the log of one of the broken recordings (some other full logs are attached) :

  ...
  
  2017.09.01 18R:22:56.171  frame=  172 fps= 45 q=-1.0 size=    2816kB time=00:00:03.45 bitrate=6674.9kbits/s speed=0.909x    
  
  2017.09.01 18R:22:56.174  [NULL @ 0000000000a89ee0] ct_type:0 pic_struct:0
  
  2017.09.01 18R:22:56.686      Last message repeated 26 times
  
  2017.09.01 18R:22:56.687  frame=  199 fps= 46 q=-1.0 size=    3072kB time=00:00:03.99 bitrate=6297.7kbits/s speed=0.926x    
  
  2017.09.01 18R:23:04.554  [NULL @ 0000000000a89ee0] ct_type:0 pic_struct:0
  
  2017.09.01 18R:23:04.571      Last message repeated 26 times
  
  2017.09.01 18R:23:04.571  frame=  226 fps= 47 q=-1.0 size=    3584kB time=00:00:04.53 bitrate=6472.7kbits/s speed=0.939x    
  
  2017.09.01 18R:23:04.571  [NULL @ 0000000000a89ee0] ct_type:0 pic_struct:0
  
  2017.09.01 18R:23:04.572      Last message repeated 26 times
  
  2017.09.01 18R:23:04.572  frame=  253 fps= 47 q=-1.0 size=    4096kB time=00:00:05.07 bitrate=6610.4kbits/s speed=0.948x    
  
  2017.09.01 18R:23:04.572  [NULL @ 0000000000a89ee0] ct_type:0 pic_struct:0
  
  2017.09.01 18R:23:04.572  frame=  254 fps= 21 q=-1.0 size=    4096kB time=00:00:05.09 bitrate=6584.5kbits/s speed=0.418x    
  
  2017.09.01 18R:23:04.572  [NULL @ 0000000000a89ee0] ct_type:0 pic_struct:0
  
  2017.09.01 18R:23:04.655      Last message repeated 5 times
  
  2017.09.01 18R:23:04.684  [rtp @ 0000000000a3a9a0] max delay reached. need to consume packet
  
  2017.09.01 18R:23:04.684  [rtp @ 0000000000a3a9a0] RTP: missed 4147 packets
  
  2017.09.01 18R:23:04.685  [rtp @ 0000000000a3a9a0] RTP: PT=21: bad cseq a237 expected=9204
  
  2017.09.01 18R:23:04.685  [rtp @ 0000000000a3a9a0] max delay reached. need to consume packet
  
  2017.09.01 18R:23:04.685  [rtp @ 0000000000a3a9a0] RTP: missed 4148 packets
  
  2017.09.01 18R:23:04.685  [rtp @ 0000000000a3a9a0] Continuity check failed for pid 256 expected 8 got 15
  
  2017.09.01 18R:23:04.686  [rtp @ 0000000000a3a9a0] Continuity check failed for pid 272 expected 10 got 15
  
  2017.09.01 18R:23:04.686  [rtp @ 0000000000a3a9a0] Continuity check failed for pid 32 expected 13 got 4
  
  2017.09.01 18R:23:04.686  [rtp @ 0000000000a3a9a0] Continuity check failed for pid 0 expected 14 got 6
  
  2017.09.01 18R:23:04.767  [NULL @ 0000000000a89ee0] ct_type:0 pic_struct:0
  
  2017.09.01 18R:23:05.255      Last message repeated 25 times
  
  2017.09.01 18R:23:05.256  frame=  286 fps= 22 q=-1.0 size=    4608kB time=00:00:12.51 bitrate=3016.0kbits/s speed=0.971x    
  
  2017.09.01 18R:23:05.257  [NULL @ 0000000000a89ee0] ct_type:0 pic_struct:0
  
  2017.09.01 18R:23:05.77      Last message repeated 26 times
  
  2017.09.01 18R:23:05.77  frame=  313 fps= 23 q=-1.0 size=    5120kB time=00:00:13.05 bitrate=3212.5kbits/s speed=0.974x    
  
  2017.09.01 18R:23:05.773  [NULL @ 0000000000a89ee0] ct_type:0 pic_struct:0
  
  2017.09.01 18R:23:06.287      Last message repeated 26 times
  
  2017.09.01 18R:23:06.288  frame=  340 fps= 24 q=-1.0 size=    5376kB time=00:00:13.59 bitrate=3239.2kbits/s speed=0.977x    
  
  2017.09.01 18R:23:06.29  [NULL @ 0000000000a89ee0] ct_type:0 pic_struct:0
  
  2017.09.01 18R:23:06.803      Last message repeated 26 times
  
  2017.09.01 18R:23:06.804  frame=  367 fps= 25 q=-1.0 size=    5888kB time=00:00:14.13 bitrate=3412.2kbits/s speed=0.979x    
  
  2017.09.01 18R:23:06.808  [NULL @ 0000000000a89ee0] ct_type:0 pic_struct:0
  
  2017.09.01 18R:23:07.324      Last message repeated 26 times
  
  2017.09.01 18R:23:07.324  frame=  394 fps= 26 q=-1.0 size=    6144kB time=00:00:14.67 bitrate=3429.5kbits/s speed=0.981x   
  
  ... 

  Some full logs :

  Full log #1

  Full log #2

• Docker alpine : ffprobe not found, despite installing ffmpeg with apk in Dockerfile

  5 mars 2023, par Harun Sasmaz

  I have a Go program that executes ffmpeg and ffprobe commands, so I need to install them in my Docker container.

  


  Here is my Dockerfile :

  


  FROM golang:1.17.7-alpine

WORKDIR /src
COPY go.mod go.sum ./
RUN go mod download
COPY . .
RUN go build -o ./server cmd/service/main.go

RUN apk update
RUN apk upgrade
RUN apk add --no-cache ffmpeg

FROM alpine
COPY --from=0 /src/server /usr/bin/server
CMD ["server"]


  


  However, when I run container, it says :

  


  exec: "ffprobe": executable file not found in $PATH


  


  How can I fix it ?