Recherche avancée

Médias (1)

Mot : - Tags -/ogv

Autres articles (57)

  • Publier sur MédiaSpip

    13 juin 2013

    Puis-je poster des contenus à partir d’une tablette Ipad ?
    Oui, si votre Médiaspip installé est à la version 0.2 ou supérieure. Contacter au besoin l’administrateur de votre MédiaSpip pour le savoir

  • Librairies et binaires spécifiques au traitement vidéo et sonore

    31 janvier 2010, par

    Les logiciels et librairies suivantes sont utilisées par SPIPmotion d’une manière ou d’une autre.
    Binaires obligatoires FFMpeg : encodeur principal, permet de transcoder presque tous les types de fichiers vidéo et sonores dans les formats lisibles sur Internet. CF ce tutoriel pour son installation ; Oggz-tools : outils d’inspection de fichiers ogg ; Mediainfo : récupération d’informations depuis la plupart des formats vidéos et sonores ;
    Binaires complémentaires et facultatifs flvtool2 : (...)

  • Support audio et vidéo HTML5

    10 avril 2011

    MediaSPIP utilise les balises HTML5 video et audio pour la lecture de documents multimedia en profitant des dernières innovations du W3C supportées par les navigateurs modernes.
    Pour les navigateurs plus anciens, le lecteur flash Flowplayer est utilisé.
    Le lecteur HTML5 utilisé a été spécifiquement créé pour MediaSPIP : il est complètement modifiable graphiquement pour correspondre à un thème choisi.
    Ces technologies permettent de distribuer vidéo et son à la fois sur des ordinateurs conventionnels (...)

Sur d’autres sites (5092)

  • How can I build a custom version of opencv while enabling CUDA and opengl ? [closed]

    10 février, par Josh

    I have a hard requirement of python3.7 for certain libraries (aeneas & afaligner). I've been using the regular opencv-python and ffmpeg libraries in my program and they've been working find.

    


    Recently I wanted to adjust my program to use h264 instead of mpeg4 and ran down a licensing rabbit hole of how opencv-python uses a build of ffmpeg with opengl codecs off to avoid licensing issues. x264 is apparently opengl, and is disabled in the opencv-python library.

    


    In order to solve this issue, I built a custom build of opencv using another custom build of ffmpeg both with opengl enabled. This allowed me to use the x264 encoder with the VideoWriter in my python program.

    


    Here's the dockerfile of how I've been running it :

    



    FROM python:3.7-slim

# Set optimization flags and number of cores globally
ENV CFLAGS="-O3 -march=native -ffast-math -flto -fno-fat-lto-objects -ffunction-sections -fdata-sections" \
    CXXFLAGS="-O3 -march=native -ffast-math -flto -fno-fat-lto-objects -ffunction-sections -fdata-sections" \
    LDFLAGS="-flto -fno-fat-lto-objects -Wl,--gc-sections" \
    MAKEFLAGS="-j\$(nproc)"

# Combine all system dependencies in a single layer
RUN apt-get update && apt-get install -y --no-install-recommends \
    build-essential \
    cmake \
    git \
    wget \
    unzip \
    yasm \
    pkg-config \
    libsm6 \
    libxext6 \
    libxrender-dev \
    libglib2.0-0 \
    libavcodec-dev \
    libavformat-dev \
    libswscale-dev \
    libavutil-dev \
    libswresample-dev \
    nasm \
    mercurial \
    libnuma-dev \
    espeak \
    libespeak-dev \
    libtiff5-dev \
    libjpeg62-turbo-dev \
    libopenjp2-7-dev \
    zlib1g-dev \
    libfreetype6-dev \
    liblcms2-dev \
    libwebp-dev \
    tcl8.6-dev \
    tk8.6-dev \
    python3-tk \
    libharfbuzz-dev \
    libfribidi-dev \
    libxcb1-dev \
    python3-dev \
    python3-setuptools \
    libsndfile1 \
    libavdevice-dev \
    libavfilter-dev \
    libpostproc-dev \
    && apt-get clean \
    && rm -rf /var/lib/apt/lists/*

# Build x264 with optimizations
RUN cd /tmp && \
    wget https://code.videolan.org/videolan/x264/-/archive/master/x264-master.tar.bz2 && \
    tar xjf x264-master.tar.bz2 && \
    cd x264-master && \
    ./configure \
        --enable-shared \
        --enable-pic \
        --enable-asm \
        --enable-lto \
        --enable-strip \
        --enable-optimizations \
        --bit-depth=8 \
        --disable-avs \
        --disable-swscale \
        --disable-lavf \
        --disable-ffms \
        --disable-gpac \
        --disable-lsmash \
        --extra-cflags="-O3 -march=native -ffast-math -fomit-frame-pointer -flto -fno-fat-lto-objects" \
        --extra-ldflags="-O3 -flto -fno-fat-lto-objects" && \
    make && \
    make install && \
    cd /tmp && \
    # Build FFmpeg with optimizations
    wget https://ffmpeg.org/releases/ffmpeg-7.1.tar.bz2 && \
    tar xjf ffmpeg-7.1.tar.bz2 && \
    cd ffmpeg-7.1 && \
    ./configure \
        --enable-gpl \
        --enable-libx264 \
        --enable-shared \
        --enable-nonfree \
        --enable-pic \
        --enable-asm \
        --enable-optimizations \
        --enable-lto \
        --enable-pthreads \
        --disable-debug \
        --disable-static \
        --disable-doc \
        --disable-ffplay \
        --disable-ffprobe \
        --disable-filters \
        --disable-programs \
        --disable-postproc \
        --extra-cflags="-O3 -march=native -ffast-math -fomit-frame-pointer -flto -fno-fat-lto-objects -ffunction-sections -fdata-sections" \
        --extra-ldflags="-O3 -flto -fno-fat-lto-objects -Wl,--gc-sections" \
        --prefix=/usr/local && \
    make && \
    make install && \
    ldconfig && \
    rm -rf /tmp/*

# Install Python dependencies first
RUN pip install --no-cache-dir --upgrade pip setuptools wheel && \
    pip install --no-cache-dir numpy py-spy

# Build OpenCV with optimized configuration
RUN cd /tmp && \
    # Download specific OpenCV version archives
    wget -O opencv.zip https://github.com/opencv/opencv/archive/4.8.0.zip && \
    wget -O opencv_contrib.zip https://github.com/opencv/opencv_contrib/archive/4.8.0.zip && \
    unzip opencv.zip && \
    unzip opencv_contrib.zip && \
    mv opencv-4.8.0 opencv && \
    mv opencv_contrib-4.8.0 opencv_contrib && \
    rm opencv.zip opencv_contrib.zip && \
    cd opencv && \
    mkdir build && cd build && \
    cmake \
        -D CMAKE_BUILD_TYPE=RELEASE \
        -D CMAKE_C_FLAGS="-O3 -march=native -ffast-math -flto -fno-fat-lto-objects -ffunction-sections -fdata-sections" \
        -D CMAKE_CXX_FLAGS="-O3 -march=native -ffast-math -flto -fno-fat-lto-objects -ffunction-sections -fdata-sections -Wno-deprecated" \
        -D CMAKE_EXE_LINKER_FLAGS="-flto -fno-fat-lto-objects -Wl,--gc-sections" \
        -D CMAKE_SHARED_LINKER_FLAGS="-flto -fno-fat-lto-objects -Wl,--gc-sections" \
        -D CMAKE_INSTALL_PREFIX=/usr/local \
        -D ENABLE_FAST_MATH=ON \
        -D CPU_BASELINE_DETECT=ON \
        -D CPU_BASELINE=SSE3 \
        -D CPU_DISPATCH=SSE4_1,SSE4_2,AVX,AVX2,AVX512_SKX,FP16 \
        -D WITH_OPENMP=ON \
        -D OPENCV_ENABLE_NONFREE=ON \
        -D WITH_FFMPEG=ON \
        -D FFMPEG_ROOT=/usr/local \
        -D OPENCV_EXTRA_MODULES_PATH=/tmp/opencv_contrib/modules \
        -D PYTHON_EXECUTABLE=/usr/local/bin/python3.7 \
        -D PYTHON3_EXECUTABLE=/usr/local/bin/python3.7 \
        -D PYTHON3_INCLUDE_DIR=/usr/local/include/python3.7m \
        -D PYTHON3_LIBRARY=/usr/local/lib/libpython3.7m.so \
        -D PYTHON3_PACKAGES_PATH=/usr/local/lib/python3.7/site-packages \
        -D PYTHON3_NUMPY_INCLUDE_DIRS=/usr/local/lib/python3.7/site-packages/numpy/core/include \
        -D BUILD_opencv_python3=ON \
        -D INSTALL_PYTHON_EXAMPLES=OFF \
        -D BUILD_TESTS=OFF \
        -D BUILD_PERF_TESTS=OFF \
        -D BUILD_EXAMPLES=OFF \
        -D BUILD_DOCS=OFF \
        -D BUILD_opencv_apps=OFF \
        -D WITH_OPENCL=OFF \
        -D WITH_CUDA=OFF \
        -D WITH_IPP=OFF \
        -D WITH_TBB=OFF \
        -D WITH_V4L=OFF \
        -D WITH_QT=OFF \
        -D WITH_GTK=OFF \
        -D BUILD_LIST=core,imgproc,imgcodecs,videoio,python3 \
        .. && \
    make && \
    make install && \
    ldconfig && \
    rm -rf /tmp/*

# Set working directory and copy application code
WORKDIR /app

COPY requirements.txt .

RUN apt-get update && apt-get install -y --no-install-recommends ffmpeg

RUN pip install --no-cache-dir aeneas afaligner && \
    pip install --no-cache-dir -r requirements.txt

COPY . .

# Make entrypoint executable
RUN chmod +x entrypoint.sh
ENTRYPOINT ["./entrypoint.sh"]


    


    My trouble now, is I've been considering running parts of my program on my GPU, it's creating graphics for a video after all. I have no idea how to edit my Dockerfile to make the opencv build run with CUDA enabled, every combination I try leads to issues.

    


    How can I tell which version of CUDA, opencv and ffmpeg are compatible with python 3.7 ? I've tried so so many combinations and they all lead to different issues, I've asked various AI agents and they all flounder. Where can I find a reliable source of information about this ?

    


  • How can I build a custom version of opencv while enabling CUDA and opengl ?

    1er avril, par Josh

    I have a hard requirement of python3.7 for certain libraries (aeneas & afaligner). I've been using the regular opencv-python and ffmpeg libraries in my program and they've been working find.

    


    Recently I wanted to adjust my program to use h264 instead of mpeg4 and ran down a licensing rabbit hole of how opencv-python uses a build of ffmpeg with opengl codecs off to avoid licensing issues. x264 is apparently opengl, and is disabled in the opencv-python library.

    


    In order to solve this issue, I built a custom build of opencv using another custom build of ffmpeg both with opengl enabled. This allowed me to use the x264 encoder with the VideoWriter in my python program.

    


    Here's the dockerfile of how I've been running it :

    



    FROM python:3.7-slim

# Set optimization flags and number of cores globally
ENV CFLAGS="-O3 -march=native -ffast-math -flto -fno-fat-lto-objects -ffunction-sections -fdata-sections" \
    CXXFLAGS="-O3 -march=native -ffast-math -flto -fno-fat-lto-objects -ffunction-sections -fdata-sections" \
    LDFLAGS="-flto -fno-fat-lto-objects -Wl,--gc-sections" \
    MAKEFLAGS="-j\$(nproc)"

# Combine all system dependencies in a single layer
RUN apt-get update && apt-get install -y --no-install-recommends \
    build-essential \
    cmake \
    git \
    wget \
    unzip \
    yasm \
    pkg-config \
    libsm6 \
    libxext6 \
    libxrender-dev \
    libglib2.0-0 \
    libavcodec-dev \
    libavformat-dev \
    libswscale-dev \
    libavutil-dev \
    libswresample-dev \
    nasm \
    mercurial \
    libnuma-dev \
    espeak \
    libespeak-dev \
    libtiff5-dev \
    libjpeg62-turbo-dev \
    libopenjp2-7-dev \
    zlib1g-dev \
    libfreetype6-dev \
    liblcms2-dev \
    libwebp-dev \
    tcl8.6-dev \
    tk8.6-dev \
    python3-tk \
    libharfbuzz-dev \
    libfribidi-dev \
    libxcb1-dev \
    python3-dev \
    python3-setuptools \
    libsndfile1 \
    libavdevice-dev \
    libavfilter-dev \
    libpostproc-dev \
    && apt-get clean \
    && rm -rf /var/lib/apt/lists/*

# Build x264 with optimizations
RUN cd /tmp && \
    wget https://code.videolan.org/videolan/x264/-/archive/master/x264-master.tar.bz2 && \
    tar xjf x264-master.tar.bz2 && \
    cd x264-master && \
    ./configure \
        --enable-shared \
        --enable-pic \
        --enable-asm \
        --enable-lto \
        --enable-strip \
        --enable-optimizations \
        --bit-depth=8 \
        --disable-avs \
        --disable-swscale \
        --disable-lavf \
        --disable-ffms \
        --disable-gpac \
        --disable-lsmash \
        --extra-cflags="-O3 -march=native -ffast-math -fomit-frame-pointer -flto -fno-fat-lto-objects" \
        --extra-ldflags="-O3 -flto -fno-fat-lto-objects" && \
    make && \
    make install && \
    cd /tmp && \
    # Build FFmpeg with optimizations
    wget https://ffmpeg.org/releases/ffmpeg-7.1.tar.bz2 && \
    tar xjf ffmpeg-7.1.tar.bz2 && \
    cd ffmpeg-7.1 && \
    ./configure \
        --enable-gpl \
        --enable-libx264 \
        --enable-shared \
        --enable-nonfree \
        --enable-pic \
        --enable-asm \
        --enable-optimizations \
        --enable-lto \
        --enable-pthreads \
        --disable-debug \
        --disable-static \
        --disable-doc \
        --disable-ffplay \
        --disable-ffprobe \
        --disable-filters \
        --disable-programs \
        --disable-postproc \
        --extra-cflags="-O3 -march=native -ffast-math -fomit-frame-pointer -flto -fno-fat-lto-objects -ffunction-sections -fdata-sections" \
        --extra-ldflags="-O3 -flto -fno-fat-lto-objects -Wl,--gc-sections" \
        --prefix=/usr/local && \
    make && \
    make install && \
    ldconfig && \
    rm -rf /tmp/*

# Install Python dependencies first
RUN pip install --no-cache-dir --upgrade pip setuptools wheel && \
    pip install --no-cache-dir numpy py-spy

# Build OpenCV with optimized configuration
RUN cd /tmp && \
    # Download specific OpenCV version archives
    wget -O opencv.zip https://github.com/opencv/opencv/archive/4.8.0.zip && \
    wget -O opencv_contrib.zip https://github.com/opencv/opencv_contrib/archive/4.8.0.zip && \
    unzip opencv.zip && \
    unzip opencv_contrib.zip && \
    mv opencv-4.8.0 opencv && \
    mv opencv_contrib-4.8.0 opencv_contrib && \
    rm opencv.zip opencv_contrib.zip && \
    cd opencv && \
    mkdir build && cd build && \
    cmake \
        -D CMAKE_BUILD_TYPE=RELEASE \
        -D CMAKE_C_FLAGS="-O3 -march=native -ffast-math -flto -fno-fat-lto-objects -ffunction-sections -fdata-sections" \
        -D CMAKE_CXX_FLAGS="-O3 -march=native -ffast-math -flto -fno-fat-lto-objects -ffunction-sections -fdata-sections -Wno-deprecated" \
        -D CMAKE_EXE_LINKER_FLAGS="-flto -fno-fat-lto-objects -Wl,--gc-sections" \
        -D CMAKE_SHARED_LINKER_FLAGS="-flto -fno-fat-lto-objects -Wl,--gc-sections" \
        -D CMAKE_INSTALL_PREFIX=/usr/local \
        -D ENABLE_FAST_MATH=ON \
        -D CPU_BASELINE_DETECT=ON \
        -D CPU_BASELINE=SSE3 \
        -D CPU_DISPATCH=SSE4_1,SSE4_2,AVX,AVX2,AVX512_SKX,FP16 \
        -D WITH_OPENMP=ON \
        -D OPENCV_ENABLE_NONFREE=ON \
        -D WITH_FFMPEG=ON \
        -D FFMPEG_ROOT=/usr/local \
        -D OPENCV_EXTRA_MODULES_PATH=/tmp/opencv_contrib/modules \
        -D PYTHON_EXECUTABLE=/usr/local/bin/python3.7 \
        -D PYTHON3_EXECUTABLE=/usr/local/bin/python3.7 \
        -D PYTHON3_INCLUDE_DIR=/usr/local/include/python3.7m \
        -D PYTHON3_LIBRARY=/usr/local/lib/libpython3.7m.so \
        -D PYTHON3_PACKAGES_PATH=/usr/local/lib/python3.7/site-packages \
        -D PYTHON3_NUMPY_INCLUDE_DIRS=/usr/local/lib/python3.7/site-packages/numpy/core/include \
        -D BUILD_opencv_python3=ON \
        -D INSTALL_PYTHON_EXAMPLES=OFF \
        -D BUILD_TESTS=OFF \
        -D BUILD_PERF_TESTS=OFF \
        -D BUILD_EXAMPLES=OFF \
        -D BUILD_DOCS=OFF \
        -D BUILD_opencv_apps=OFF \
        -D WITH_OPENCL=OFF \
        -D WITH_CUDA=OFF \
        -D WITH_IPP=OFF \
        -D WITH_TBB=OFF \
        -D WITH_V4L=OFF \
        -D WITH_QT=OFF \
        -D WITH_GTK=OFF \
        -D BUILD_LIST=core,imgproc,imgcodecs,videoio,python3 \
        .. && \
    make && \
    make install && \
    ldconfig && \
    rm -rf /tmp/*

# Set working directory and copy application code
WORKDIR /app

COPY requirements.txt .

RUN apt-get update && apt-get install -y --no-install-recommends ffmpeg

RUN pip install --no-cache-dir aeneas afaligner && \
    pip install --no-cache-dir -r requirements.txt

COPY . .

# Make entrypoint executable
RUN chmod +x entrypoint.sh
ENTRYPOINT ["./entrypoint.sh"]


    


    My trouble now, is I've been considering running parts of my program on my GPU, it's creating graphics for a video after all. I have no idea how to edit my Dockerfile to make the opencv build run with CUDA enabled, every combination I try leads to issues.

    


    How can I tell which version of CUDA, opencv and ffmpeg are compatible with python 3.7 ?

    


  • Revision 29188 : 2 options de plus pour personnaliser la page d’activation de la mutu : * ...

    15 juin 2009, par real3t@… — Log

    2 options de plus pour personnaliser la page d’activation de la mutu :
    * ’branding’ : texte libre en HTML
    * ’branding_logo’ => logo (sous forme de HTML)

Navigation