Recherche avancée

Sur d’autres sites (4440)

• "Pixel format 'yuvj420p' is not supported" when converting image to video using CUDA hardware acceleration

  11 février 2020, par laurent

  I’m trying to convert an image to a video using CUDA hardware acceleration but I can’t get it to work.

  The basic command I have is this one :

  ffmpeg -y -hwaccel cuvid -i tests/MediaSamples/portrait_0.jpg -t 10 out.mp4

  And I’m getting this error :

  [AVHWFramesContext @ 0x32d3f00] Pixel format 'yuvj420p' is not supported
  
  [mjpeg @ 0x2d18480] Error initializing a CUDA frame pool
  
  cuvid hwaccel requested for input stream #0:0, but cannot be initialized.
  
  Error while decoding stream #0:0: Invalid argument

  I’ve tried setting the pixel format like so, but that didn’t help :

  ffmpeg -y -hwaccel cuvid -pix_fmt yuv420p -i tests/MediaSamples/portrait_0.jpg -t 10 out.mp4

  I’ve also tried many other flags but can’t get anything to work. Any idea what the issue might be ?

  For information this is the full log :

  ffmpeg version N-96615-gc35382a Copyright (c) 2000-2020 the FFmpeg developers
  
    built with gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.12) 20160609
  
    configuration: --enable-nonfree --disable-shared --enable-gpl --enable-openssl --enable-libx264 --enable-cuda-sdk --enable-nvenc --enable-cuda --enable-cuvid --enable-libnpp --extra-cflags='-I/usr/local/ssl/include -I/usr/local/cuda/include -I/usr/local/include -L/usr/local/ssl/lib -Wl,-rpath=/usr/local/ssl/lib' --extra-ldflags=-L/usr/local/cuda/lib64
  
    libavutil      56. 38.100 / 56. 38.100
  
    libavcodec     58. 67.101 / 58. 67.101
  
    libavformat    58. 37.100 / 58. 37.100
  
    libavdevice    58.  9.103 / 58.  9.103
  
    libavfilter     7. 73.100 /  7. 73.100
  
    libswscale      5.  6.100 /  5.  6.100
  
    libswresample   3.  6.100 /  3.  6.100
  
    libpostproc    55.  6.100 / 55.  6.100
  
  Input #0, image2, from 'tests/MediaSamples/portrait_0.jpg':
  
    Duration: 00:00:00.04, start: 0.000000, bitrate: 40237 kb/s
  
      Stream #0:0: Video: mjpeg (Progressive), yuvj420p(pc, bt470bg/unknown/unknown), 1600x900 [SAR 72:72 DAR 16:9], 25 tbr, 25 tbn, 25 tbc
  
  Stream mapping:
  
    Stream #0:0 -> #0:0 (mjpeg (native) -> h264 (libx264))
  
  Press [q] to stop, [?] for help
  
  [AVHWFramesContext @ 0x32d3f00] Pixel format 'yuvj420p' is not supported
  
  [mjpeg @ 0x2d18480] Error initializing a CUDA frame pool
  
  cuvid hwaccel requested for input stream #0:0, but cannot be initialized.
  
  Error while decoding stream #0:0: Invalid argument
  
  [libx264 @ 0x2d1e840] using SAR=1/1
  
  [libx264 @ 0x2d1e840] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 AVX2 LZCNT BMI2
  
  [libx264 @ 0x2d1e840] profile High, level 4.0
  
  [libx264 @ 0x2d1e840] 264 - core 148 r2643 5c65704 - H.264/MPEG-4 AVC codec - Copyleft 2003-2015 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=24 lookahead_threads=4 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
  
  Output #0, mp4, to 'out.mp4':
  
    Metadata:
  
      encoder         : Lavf58.37.100
  
      Stream #0:0: Video: h264 (libx264) (avc1 / 0x31637661), yuvj420p(pc), 1600x900 [SAR 72:72 DAR 16:9], q=-1--1, 25 fps, 12800 tbn, 25 tbc
  
      Metadata:
  
        encoder         : Lavc58.67.101 libx264
  
      Side data:
  
        cpb: bitrate max/min/avg: 0/0/0 buffer size: 0 vbv_delay: N/A
  
  frame=    0 fps=0.0 q=0.0 Lsize=       0kB time=00:00:00.00 bitrate=N/A speed=   0x
  
  video:0kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: unknown
  
  Conversion failed!

• Concatenating on Windows throws "Invalid data found when processing input" while it works on Mac and Linux

  15 février 2020, par miguelmorin

  I need to run a command with a nightly build of FFMPEG to report a bug on the concat protocol. I found it difficult to compile from source with libx264 support on Linux, and I want to spare my Mac computer, so I use the nightly build on Windows from Zeranoe.

  I call this command to concatenate the files :

  ffmpeg -safe 0 concat -i files_to_combine -vcodec libx264 show.mp4

  where files_to_combine is :

  file ./short_DSC_0013.MOV
  
  file ./short_DSC_0014.MOV
  
  file ./short_DSC_0015.MOV
  
  file ./short_DSC_0016.MOV
  
  file ./short_DSC_0017.MOV
  
  file ./short_DSC_0018.MOV
  
  file ./short_DSC_0019.MOV

  I call this command from the directory containing the video files and files_to_combine.

  On Windows with a nightly build, I get the error :

  files_to_combine : Invalid data found when processing input
  

  I changed file ./DSC_0013.MOV to these options, all with the same error :

  file 'short_DSC_0013.MOV'
  
  file '.\short_DSC_0013.MOV'
  
  file 'F:\short_DSC_0013.MOV'

  How can I debug this error, or what is the syntax for concatenating on Windows with a nightly build ?

  Update with log-level 48

  I ran the same command with -v 48 and got :

  F :\brain squids>C :\Users\migue\Desktop\ffmpeg-20200211-f15007a-win64-static\bin\ffmpeg.exe -v 48 -i files_to_combine -vcodec libx264 show.mp4
  ffmpeg version git-2020-02-11-f15007a Copyright (c) 2000-2020 the FFmpeg developers
    built with gcc 9.2.1 (GCC) 20200122
    configuration : —enable-gpl —enable-version3 —enable-sdl2 —enable-fontconfig —enable-gnutls —enable-iconv —enable-libass —enable-libdav1d —enable-libbluray —enable-libfreetype —enable-libmp3lame —enable-libopencore-amrnb —enable-libopencore-amrwb —enable-libopenjpeg —enable-libopus —enable-libshine —enable-libsnappy —enable-libsoxr —enable-libtheora —enable-libtwolame —enable-libvpx —enable-libwavpack —enable-libwebp —enable-libx264 —enable-libx265 —enable-libxml2 —enable-libzimg —enable-lzma —enable-zlib —enable-gmp —enable-libvidstab —enable-libvorbis —enable-libvo-amrwbenc —enable-libmysofa —enable-libspeex —enable-libxvid —enable-libaom —enable-libmfx —enable-ffnvcodec —enable-cuvid —enable-d3d11va —enable-nvenc —enable-nvdec —enable-dxva2 —enable-avisynth —enable-libopenmpt —enable-amf
    libavutil      56. 39.100 / 56. 39.100
    libavcodec     58. 68.102 / 58. 68.102
    libavformat    58. 38.100 / 58. 38.100
    libavdevice    58.  9.103 / 58.  9.103
    libavfilter     7. 75.100 /  7. 75.100
    libswscale      5.  6.100 /  5.  6.100
    libswresample   3.  6.100 /  3.  6.100
    libpostproc    55.  6.100 / 55.  6.100
  Splitting the commandline.
  Reading option ’-v’ ... matched as option ’v’ (set logging level) with argument ’48’.
  Reading option ’-i’ ... matched as input url with argument ’files_to_combine’.
  Reading option ’-vcodec’ ... matched as option ’vcodec’ (force video codec (’copy’ to copy stream)) with argument ’libx264’.
  Reading option ’show.mp4’ ... matched as output url.
  Finished splitting the commandline.
  Parsing a group of options : global .
  Applying option v (set logging level) with argument 48.
  Successfully parsed a group of options.
  Parsing a group of options : input url files_to_combine.
  Successfully parsed a group of options.
  Opening an input file : files_to_combine.
  [NULL @ 0000021c781784c0] Opening ’files_to_combine’ for reading
  [file @ 0000021c78179580] Setting default whitelist ’file,crypto,data’
  [AVIOContext @ 0000021c781817c0] Statistics : 182 bytes read, 0 seeks
  files_to_combine : Invalid data found when processing input
  

  The contents of files_to_combine is :

  file ’short_DSC_0013.MOV’
  file ’short_DSC_0014.MOV’
  file ’short_DSC_0015.MOV’
  file ’short_DSC_0016.MOV’
  file ’short_DSC_0017.MOV’
  file ’short_DSC_0018.MOV’
  file ’short_DSC_0019.MOV’
  

  Update because of wrong command

  I had mistyped the command. The right command has a -f in front of concat, which I found because the accepted answer was able to make the command work in a similar environment :

  ffmpeg -safe 0 -f concat -i files_to_combine -vcodec libx264 show.mp4

• FFMPEG "Segmentation fault" with stream source and watermark

  4 mars 2020, par Magikey

  I use release : 4.2.2 (static) from "https://johnvansickle.com/ffmpeg/"

  Final code will be on "Amazon AWS lambda"

  Goal : use a url stream and add watermak

  Link to video : ​https://feoval.fr/519.mp4

  Link to Watermak : ​https://feoval.fr/watermark.png

  ./ffmpeg -i "https://feoval.fr/519.mp4" -i "./watermark.png" -filter_complex "overlay=W-w-10:H-h-10:format=rgb" -f "mp4" -movflags "frag_keyframe+empty_moov" -pix_fmt "yuv420p" test.mp4

  return "Segmentation fault"

  I have the same error on my computer and on AWS Lambda server

  ./ffmpeg -i "https://feoval.fr/519.mp4" -f "mp4" -movflags "frag_keyframe+empty_moov" -pix_fmt "yuv420p" test.mp4

  work (but not watermak)

  ./ffmpeg -i "./519.mp4" -i "./watermark.png" -filter_complex "overlay=W-w-10:H-h-10:format=rgb" -f "mp4" -movflags "frag_keyframe+empty_moov" -pix_fmt "yuv420p" test.mp4

  work (but not with stream)

  Thanks you very much !

  Logs for the first case who return "Segmentation fault" :

  ...
  
  Stream mapping:
  
  Stream #0:0 (h264) -> overlay:main (graph 0)
  
  Stream #1:0 (png) -> overlay:overlay (graph 0)
  
  overlay (graph 0) -> Stream #0:0 (libx264)
  
  Stream #0:1 -> #0:1 (aac (native) -> aac (native))
  
  Press [q] to stop, ? for help
  
  [libx264 @ 0x742e480] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX
  
  [libx264 @ 0x742e480] profile High, level 3.1, 4:2:0, 8-bit
  
  [libx264 @ 0x742e480] 264 - core 159 r2991 1771b55 - H.264/MPEG-4 AVC codec - Copyleft 2003-2019 - ​http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=12 lookahead_threads=2 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
  
  Output #0, mp4, to 'test.mp4':
  
  Metadata:
  
  major_brand : mp42
  
  minor_version : 1
  
  compatible_brands: isommp41mp42
  
  encoder : Lavf58.29.100
  
  Stream #0:0: Video: h264 (libx264) (avc1 / 0x31637661), yuv420p, 480x848, q=-1--1, 30 fps, 15360 tbn, 30 tbc (default)
  
  Metadata:
  
  encoder : Lavc58.54.100 libx264
  
  Side data:
  
  cpb: bitrate max/min/avg: 0/0/0 buffer size: 0 vbv_delay: -1
  
  Stream #0:1(und): Audio: aac (LC) (mp4a / 0x6134706D), 44100 Hz, stereo, fltp, 128 kb/s (default)
  
  Metadata:
  
  creation_time : 2020-01-13T08:54:26.000000Z
  
  handler_name : Core Media Audio
  
  encoder : Lavc58.54.100 aac
  
  Segmentation fault (core dumped)