Recherche avancée

Sur d’autres sites (3586)

• webm to mp4 conversion using ffmpeg

  25 juillet 2022, par Pavan K

  When I try to convert a webm file to mp4 the output is very very choppy and it appears as if many frames have been dropped by ffmpeg

  



  I used the following commands to convert

  



  ffmpeg -i movie.webm movie.mp4
ffmpeg -i movie.webm -vcodec libx264 movie.mp4
ffmpeg -i movie.webm -vcodec libx264 -qscale 0 movie.mp4


  



  All of them have the same problem. When I use ffprobe it seems to show the frames more or less properly.

  



  UPDATE :

  



   built on Jun 14 2013 14:31:50 with gcc 4.7 (Ubuntu/Linaro 4.7.2-2ubuntu1)
  configuration: --prefix=/home/user2/ffmpeg_build --extra-cflags=-I/home/user2/ffmpeg_build/include --extra-ldflags=-L/home/pavan4/ffmpeg_build/lib --bindir=/home/pavan4/bin --extra-libs=-ldl --enable-gpl --enable-libass --enable-libfdk-aac --enable-libmp3lame --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libx264 --enable-nonfree --enable-x11grab
  libavutil      52. 35.101 / 52. 35.101
  libavcodec     55. 16.100 / 55. 16.100
  libavformat    55.  8.102 / 55.  8.102
  libavdevice    55.  2.100 / 55.  2.100
  libavfilter     3. 77.101 /  3. 77.101
  libswscale      2.  3.100 /  2.  3.100
  libswresample   0. 17.102 /  0. 17.102
  libpostproc    52.  3.100 / 52.  3.100
Hyper fast Audio and Video encoder
usage: ffmpeg [options] [[infile options] -i infile]... {[outfile options] outfile}...

Use -h to get full help or, even better, run 'man ffmpeg'

Input #0, matroska,webm, from '1.webm':
  Duration: 00:00:10.64, start: 0.000000, bitrate: 5024 kb/s
    Stream #0:0(eng): Video: vp8, yuv420p, 1280x720, SAR 1:1 DAR 16:9, 1k fps, 1k tbr, 1k tbn, 1k tbc (default)
[libx264 @ 0x1d966a0] using SAR=1/1
[libx264 @ 0x1d966a0] MB rate (3600000) > level limit (2073600)
[libx264 @ 0x1d966a0] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2
[libx264 @ 0x1d966a0] profile High, level 5.2
[libx264 @ 0x1d966a0] 264 - core 133 r2 a3ac64b - H.264/MPEG-4 AVC codec - Copyleft 2003-2013 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=12 lookahead_threads=2 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
Output #0, mp4, to '1_conv4.mp4':
  Metadata:
    encoder         : Lavf55.8.102
    Stream #0:0(eng): Video: h264 (libx264) ([33][0][0][0] / 0x0021), yuv420p, 1280x720 [SAR 1:1 DAR 16:9], q=-1--1, 16k tbn, 1k tbc (default)
Stream mapping:
Stream #0:0 -> #0:0 (vp8 -> libx264)
Press [q] to stop, [?] for help
frame=  168 fps=0.0 q=33.0 size=      62kB time=00:00:00.11 bitrate=4606.0kbits/frame=  293 fps=230 q=33.0 size=     138kB time=00:00:00.23 bitrate=4809.7kbits/

video:5620kB audio:0kB subtitle:0 global headers:0kB muxing overhead 2.212461%
[libx264 @ 0x1d966a0] frame I:46    Avg QP:18.50  size: 39849
[libx264 @ 0x1d966a0] frame P:2940  Avg QP:18.27  size:  1222
[libx264 @ 0x1d966a0] frame B:7651  Avg QP:17.68  size:    43
[libx264 @ 0x1d966a0] consecutive B-frames:  4.0%  0.2%  0.3% 95.5%
[libx264 @ 0x1d966a0] mb I  I16..4: 19.9% 63.2% 16.9%
[libx264 @ 0x1d966a0] mb P  I16..4:  0.2%  0.5%  0.1%  P16..4:  3.9%  1.1%  0.6%  0.0%  0.0%    skip:93.6%
[libx264 @ 0x1d966a0] mb B  I16..4:  0.0%  0.0%  0.0%  B16..8:  0.2%  0.0%  0.0%  direct: 0.0%  skip:99.8%  L0:25.1% L1:74.9% BI: 0.0%
[libx264 @ 0x1d966a0] 8x8 transform intra:63.6% inter:75.9%
[libx264 @ 0x1d966a0] coded y,uvDC,uvAC intra: 61.5% 53.4% 24.4% inter: 0.5% 0.5% 0.0%
[libx264 @ 0x1d966a0] i16 v,h,dc,p: 52% 19% 19% 11%
[libx264 @ 0x1d966a0] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 32% 17% 13%  4%  6%  9%  5%  8%  6%
[libx264 @ 0x1d966a0] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 30% 18% 14%  5%  8% 10%  6%  6%  3%
[libx264 @ 0x1d966a0] i8c dc,h,v,p: 55% 17% 24%  4%
[libx264 @ 0x1d966a0] Weighted P-Frames: Y:0.0% UV:0.0%
[libx264 @ 0x1d966a0] ref P L0: 82.5% 13.2%  4.0%  0.3%
[libx264 @ 0x1d966a0] ref B L0: 60.2% 39.2%  0.6%
[libx264 @ 0x1d966a0] ref B L1: 98.5%  1.5%
[libx264 @ 0x1d966a0] kb/s:4327.77


  


• ffmpeg is generating an out-of-sync audio/video file

  4 mars 2020, par marcelorocks

  I am trying to convert a flv video to mp4 using a264, but the result video has a out of sync audio/video. The audio seems ok but the video seems slow and therefore out of sync with the audio.

  Here is the command I am running :

  /opt/local/bin/ffmpeg -i complaint.flv -f mp4 -vcodec libx264 -acodec aac -copyts -strict experimental -fpre /opt/local/share/ffmpeg/libx264-lossless_slow.ffpreset -ab 44k -threads 0 -crf 23 complaint.mp4

  And the output :

  Desktop  /opt/local/bin/ffmpeg -i complaint.flv -f mp4 -vcodec libx264 -acodec aac -copyts -strict experimental -fpre /opt/local/share/ffmpeg/libx264-lossless_slow.ffpreset -ab 44k -threads 0 -crf 23 complaint.mp4
  
  ffmpeg version 0.7.8, Copyright (c) 2000-2011 the FFmpeg developers
  
    built on Jan 12 2012 21:12:26 with gcc 4.2.1 (Apple Inc. build 5666) (dot 3)
  
    configuration: --prefix=/opt/local --enable-gpl --enable-postproc --enable-swscale --enable-avfilter --enable-libmp3lame --enable-libvorbis --enable-libtheora --enable-libdirac --enable-libschroedinger --enable-libopenjpeg --enable-libxvid --enable-libx264 --enable-libvpx --enable-libspeex --mandir=/opt/local/share/man --enable-shared --enable-pthreads --cc=/usr/bin/gcc-4.2 --arch=x86_64 --enable-yasm
  
    libavutil    50. 43. 0 / 50. 43. 0
  
    libavcodec   52.123. 0 / 52.123. 0
  
    libavformat  52.111. 0 / 52.111. 0
  
    libavdevice  52.  5. 0 / 52.  5. 0
  
    libavfilter   1. 80. 0 /  1. 80. 0
  
    libswscale    0. 14. 1 /  0. 14. 1
  
    libpostproc  51.  2. 0 / 51.  2. 0
  
  [flv @ 0x7fe57a04ac00] Estimating duration from bitrate, this may be inaccurate
  
  Input #0, flv, from 'complaint.flv':
  
    Metadata:
  
      duration        : 7
  
      creationdate    : Thu Jan 12 23:47:24
  
      description     : Recorded using VideoRecording example.
  
    Duration: 00:00:06.61, start: 0.000000, bitrate: N/A
  
      Stream #0.0: Video: flv, yuv420p, 288x288, 1k tbr, 1k tbn, 1k tbc
  
      Stream #0.1: Audio: nellymoser, 11025 Hz, mono, s16
  
  File 'complaint.mp4' already exists. Overwrite ? [y/N] y
  
  [buffer @ 0x7fe579c32cc0] w:288 h:288 pixfmt:yuv420p tb:1/1000000 sar:0/1 sws_param:
  
  [libx264 @ 0x7fe57a044600] using cpu capabilities: none!
  
  [libx264 @ 0x7fe57a044600] profile High, level 4.2
  
  [libx264 @ 0x7fe57a044600] 264 - core 118 - H.264/MPEG-4 AVC codec - Copyleft 2003-2011 - http://www.videolan.org/x264.html - options: cabac=1 ref=2 deblock=1:0:0 analyse=0x3:0x33 me=umh subme=6 psy=1 psy_rd=1.00:0.00 mixed_ref=0 me_range=16 chroma_me=1 trellis=0 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=6 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.41 aq=1:1.00
  
  Output #0, mp4, to 'complaint.mp4':
  
    Metadata:
  
      duration        : 7
  
      creationdate    : Thu Jan 12 23:47:24
  
      description     : Recorded using VideoRecording example.
  
      encoder         : Lavf52.111.0
  
      Stream #0.0: Video: libx264, yuv420p, 288x288, q=0-69, 200 kb/s, 1k tbn, 1k tbc
  
      Stream #0.1: Audio: aac, 11025 Hz, mono, s16, 44 kb/s
  
  Stream mapping:
  
    Stream #0.0 -> #0.0
  
    Stream #0.1 -> #0.1
  
  Press [q] to stop, [?] for help
  
  frame= 6557 fps=106 q=-1.0 Lsize=     685kB time=00:00:03.62 bitrate=1549.1kbits/s dup=6367 drop=0    
  
  video:615kB audio:17kB global headers:0kB muxing overhead 8.361360%
  
  frame I:27    Avg QP:19.98  size:  8242
  
  [libx264 @ 0x7fe57a044600] frame P:6530  Avg QP:30.71  size:    62
  
  [libx264 @ 0x7fe57a044600] mb I  I16..4: 11.1% 79.3%  9.6%
  
  [libx264 @ 0x7fe57a044600] mb P  I16..4:  0.1%  0.2%  0.0%  P16..4:  1.2%  0.2%  0.3%  0.0%  0.0%    skip:98.0%
  
  [libx264 @ 0x7fe57a044600] 8x8 transform intra:77.8% inter:64.9%
  
  [libx264 @ 0x7fe57a044600] coded y,uvDC,uvAC intra: 75.3% 81.3% 33.3% inter: 0.5% 0.7% 0.1%
  
  [libx264 @ 0x7fe57a044600] i16 v,h,dc,p: 78%  9% 10%  3%
  
  [libx264 @ 0x7fe57a044600] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 35% 11% 32%  3%  4%  5%  2%  5%  4%
  
  [libx264 @ 0x7fe57a044600] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 56%  7%  9%  3%  4%  7%  3%  7%  3%
  
  [libx264 @ 0x7fe57a044600] i8c dc,h,v,p: 45% 15% 34%  6%
  
  [libx264 @ 0x7fe57a044600] Weighted P-Frames: Y:0.0% UV:0.0%
  
  [libx264 @ 0x7fe57a044600] ref P L0: 80.5%  9.5% 10.0%
  
  [libx264 @ 0x7fe57a044600] kb/s:767.20

  Is there something I’m missing to make sure the video and audio line up perfectly ?

• file input from http (url) in melt plugin

  26 décembre 2017, par Anuj TBE

  I’m using MELT plugin for generating crossfade animation using series of images.

  I found the corssfade animation script from here.

  and the script is

  melt -verbose \
  
  -profile atsc_720p_25 \
  
  001.png out=50 \
  
  002.png out=75 -mix 25 -mixer luma \
  
  003.png out=75 -mix 25 -mixer luma \
  
  004.png out=75 -mix 25 -mixer luma \
  
  005.png out=75 -mix 25 -mixer luma \
  
  -consumer avformat:output.mp4 vcodec=libx264 an=1

  But instead of providing file from local path, I want to use http url like

  melt -verbose \
  
  -profile atsc_720p_25 \
  
  http://example.com/image1.jpg out=50 \
  
  http://example.com/image2.jpg out=75 -mix 25 -mixer luma \
  
  http://example.com/image3.jpg out=75 -mix 25 -mixer luma \
  
  http://example.com/image4.jpg out=75 -mix 25 -mixer luma \
  
  http://example.com/image5.jpg out=75 -mix 25 -mixer luma \
  
  -consumer avformat:output.mp4 vcodec=libx264 an=1

  But it gives

  No LADSPA plugins were found!
  
  
  
  Check your LADSPA_PATH environment variable.

  and full output is

  No LADSPA plugins were found!
  
  
  
  Check your LADSPA_PATH environment variable.
  
  [mjpeg @ 0x168a320] Changeing bps to 8
  
  [mjpeg @ 0x12725a0] Changeing bps to 8
  
  [mjpeg @ 0x1691120] Changeing bps to 8
  
  [mjpeg @ 0x1bc5ac0] Changeing bps to 8
  
  [mjpeg @ 0x1907ae0] Changeing bps to 8
  
  [mjpeg @ 0x1d09a20] Changeing bps to 8
  
  [mjpeg @ 0x13a2b00] Changeing bps to 8
  
  [mjpeg @ 0x1e4e6e0] Changeing bps to 8
  
  [mjpeg @ 0x1d0b8c0] Changeing bps to 8
  
  [mjpeg @ 0x1d190c0] Changeing bps to 8
  
  +-----+ +-----+ +-----+ +-----+ +-----+ +-----+ +-----+ +-----+ +-----+
  
  |1=-10| |2= -5| |3= -2| |4= -1| |5=  0| |6=  1| |7=  2| |8=  5| |9= 10|
  
  +-----+ +-----+ +-----+ +-----+ +-----+ +-----+ +-----+ +-----+ +-----+
  
  +---------------------------------------------------------------------+
  
  |               H = back 1 minute,  L = forward 1 minute              |
  
  |                 h = previous frame,  l = next frame                 |
  
  |           g = start of clip, j = next clip, k = previous clip       |
  
  |                0 = restart, q = quit, space = play                  |
  
  +---------------------------------------------------------------------+
  
  [libx264 @ 0x7f7f980c7aa0] using SAR=1/1
  
  [libx264 @ 0x7f7f980c7aa0] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 AVX2 LZCNT BMI2
  
  [libx264 @ 0x7f7f980c7aa0] profile High, level 3.1
  
  [libx264 @ 0x7f7f980c7aa0] 264 - core 148 r2643 5c65704 - H.264/MPEG-4 AVC codec - Copyleft 2003-2015 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=6 lookahead_threads=1 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
  
  [mjpeg @ 0x7f7f88433200] Changeing bps to 8
  
  [mjpeg @ 0x7f7f88832980] Changeing bps to 8
  
  [mjpeg @ 0x7f7f88052ac0] Changeing bps to 8
  
  [mjpeg @ 0x7f7f88c5abe0] Changeing bps to 8
  
  [mjpeg @ 0x7f7f88bdd560] Changeing bps to 8
  
  [mjpeg @ 0x7f7f88beb2a0] Changeing bps to 8
  
  [mjpeg @ 0x7f7f88c838a0] Changeing bps to 8
  
  [mjpeg @ 0x7f7f894a1100] Changeing bps to 8
  
  [mjpeg @ 0x7f7f88b6a3a0] Changeing bps to 8
  
  [mjpeg @ 0x7f7f88b78840] Changeing bps to 8
  
  [swscaler @ 0x7f7f88c5f740] YUV color matrix differs for YUV->YUV, using intermediate RGB to convert
  
  [swscaler @ 0x7f7f88c5f740] YUV color matrix differs for YUV->YUV, using intermediate RGB to convert
  
  [swscaler @ 0x7f7f898cc980] Warning: data is not aligned! This can lead to a speedloss
  
  [swscaler @ 0x7f7f88c5f740] YUV color matrix differs for YUV->YUV, using intermediate RGB to convert
  
  [swscaler @ 0x7f7f88c5f740] YUV color matrix differs for YUV->YUV, using intermediate RGB to convert
  
  [swscaler @ 0x7f7f88c5f740] YUV color matrix differs for YUV->YUV, using intermediate RGB to convert
  
  [mjpeg @ 0x7f7f89ff25a0] Changeing bps to 8
  
  Segmentation fault (core dumped)

  Also, the generated video file is broken

  How can I provide http input ?