Recherche avancée

Sur d’autres sites (5747)

• Anomalie #3227 : Bug date de publication

  17 septembre 2014, par 毎日 erational -

  quelqu’un sur le forum http://forum.spip.net/fr_258722.html signale une erreur de type avec le mktime

• What are supported ffmpeg rtp_mpegts Muxer options ? (mpegts Muxer options are ignored)

  7 mars 2020, par drake7

  I created a UDP stream with -f mpegts and some options like -mpegts_transport_stream_id.

  I received the stream with "StreamXpert - Real-time stream analyzer" that shows all options are in the output. See my ffmpeg parameters and the StreamXpert at the end.

  The same Muxer options seem to be ignored with -f rtp_mpegts.

  I have tried to use -f mpegts and pipe it to -f rtp_mpegts like so :

  ffmpeg -i ... -f mpegts pipe: | ffmpeg pipe: -c copy -f rtp_mpegts "rtp://239.1.1.9:1234?pkt_size=1316"

  The options are still ignored.

  This ticket "support options for MPEGTS muxer when using RTP_MPEGTS" also notices the ignored option. Furthermore in this comment, "thovo" gives an analysis and suggests a solution.

  Obviously the problem still exists. Anybody found a workaround for this ?

  My additional question : I have not questioned if my project really needs rtp in the first place. Maybe my coworker didn’t know better and requested rtp when udp would be sufficient as well.

  The aim was to receive the RTP stream with a TV using DVB via IP. This was successful an a Panasonic TV.

  The SAT>IP Specification on page 10 requires rtp for Media Transport :

  The SAT>IP protocol makes use of :

  • UPnP for Addressing, Discovery and Description,
  • RTSP or HTTP for Control,
  • RTP or HTTP for Media Transport.

  Is udp out of the equation ?

  ---

  ffmpeg : (all options are in the output with -f mpegts)

  (HEX to decimal : 0x005A = 90, 0x005B = 91 0x005C = 92, 0x005D = 93, 0x005E= 94)

  ffmpeg -f lavfi -i testsrc \
  
  -r 25 \
  
  -c:v libx264 \
  
  -pix_fmt yuv420p \
  
  -profile:v main -level 3.1 \
  
  -preset veryfast \
  
  -vf scale=1280:720,setdar=dar=16/9 \
  
  -an \
  
  -bsf:v h264_mp4toannexb \
  
  -flush_packets 0 \
  
  -b:v 4M \
  
  -muxrate 8M \
  
  -pcr_period 20 \
  
  -pat_period 0.10 \
  
  -sdt_period 0.25 \
  
  -metadata:s:a:0 language=nya \
  
  -mpegts_flags +pat_pmt_at_frames \
  
  -mpegts_transport_stream_id 0x005A \
  
  -mpegts_original_network_id 0x005B \
  
  -mpegts_service_id 0x005C \
  
  -mpegts_pmt_start_pid 0x005D \
  
  -mpegts_start_pid 0x005E \
  
  -mpegts_service_type advanced_codec_digital_hdtv \
  
  -metadata service_provider='WI' \ 
  
  -metadata service_name='W' \
  
  -mpegts_flags system_b -flush_packets 0 \
  
  -f mpegts "udp://239.1.1.10:1234?pkt_size=1316"

  StreamXpert Output :

  -mpegts_transport_stream_id = Transport Stream ID (yellow text highlight)

  -mpegts_original_network_id = Original Network ID, onw (green text highlight)

  -mpegts_service_id = Program, service (pink text highlight)

  -mpegts_pmt_start_pid = PMT PID, Table PID (turquoise text highlight)

  -mpegts_start_pid = PID, PCR PID (red text highlight)

  -mpegts_service_type = service type (blue text)

  service_name = Service name (orange text)

  service_provider = Service provider (pink text)

  

• Beware the builtins

  14 janvier 2010, par Mans — Compilers

  GCC includes a large number of builtin functions allegedly providing optimised code for common operations not easily expressed directly in C. Rather than taking such claims at face value (this is GCC after all), I decided to conduct a small investigation to see how well a few of these functions are actually implemented for various targets.

  For my test, I selected the following functions :

  • __builtin_bswap32 : Byte-swap a 32-bit word.
  • __builtin_bswap64 : Byte-swap a 64-bit word.
  • __builtin_clz : Count leading zeros in a word.
  • __builtin_ctz : Count trailing zeros in a word.
  • __builtin_prefetch : Prefetch data into cache.

  To test the quality of these builtins, I wrapped each in a normal function, then compiled the code for these targets :

  • ARMv7
  • AVR32
  • MIPS
  • MIPS64
  • PowerPC
  • PowerPC64
  • x86
  • x86_64

  In all cases I used compiler flags were -O3 -fomit-frame-pointer plus any flags required to select a modern CPU model.
  

  ARM

  Both __builtin_clz and __builtin_prefetch generate the expected CLZ and PLD instructions respectively. The code for __builtin_ctz is reasonable for ARMv6 and earlier :

  rsb     r3, r0, #0
  and     r0, r3, r0
  clz     r0, r0
  rsb     r0, r0, #31
  

  For ARMv7 (in fact v6T2), however, using the new bit-reversal instruction would have been better :

  rbit    r0, r0
  clz     r0, r0
  

  I suspect this is simply a matter of the function not yet having been updated for ARMv7, which is perhaps even excusable given the relatively rare use cases for it.

  The byte-reversal functions are where it gets shocking. Rather than use the REV instruction found from ARMv6 on, both of them generate external calls to __bswapsi2 and __bswapdi2 in libgcc, which is plain C code :

  SItype
  __bswapsi2 (SItype u)
  
    return ((((u) & 0xff000000) >> 24)
            | (((u) & 0x00ff0000) >>  8)
            | (((u) & 0x0000ff00) <<  8)
            | (((u) & 0x000000ff) << 24)) ;
  
  DItype
  
  __bswapdi2 (DItype u)
  
  
  
     return ((((u) & 0xff00000000000000ull) >> 56)
  
            | (((u) & 0x00ff000000000000ull) >> 40)
  
            | (((u) & 0x0000ff0000000000ull) >> 24)
  
            | (((u) & 0x000000ff00000000ull) >>  8)
  
            | (((u) & 0x00000000ff000000ull) <<  8)
  
            | (((u) & 0x0000000000ff0000ull) << 24)
  
            | (((u) & 0x000000000000ff00ull) << 40)
  
            | (((u) & 0x00000000000000ffull) << 56)) ;
  
  
  

  While the 32-bit version compiles to a reasonable-looking shift/mask/or job, the 64-bit one is a real WTF. Brace yourselves :

  push    r4, r5, r6, r7, r8, r9, sl, fp
  mov     r5, #0
  mov     r6, #65280 ; 0xff00
  sub     sp, sp, #40 ; 0x28
  and     r7, r0, r5
  and     r8, r1, r6
  str     r7, [sp, #8]
  str     r8, [sp, #12]
  mov     r9, #0
  mov     r4, r1
  and     r5, r0, r9
  mov     sl, #255 ; 0xff
  ldr     r9, [sp, #8]
  and     r6, r4, sl
  mov     ip, #16711680 ; 0xff0000
  str     r5, [sp, #16]
  str     r6, [sp, #20]
  lsl     r2, r0, #24
  and     ip, ip, r1
  lsr     r7, r4, #24
  mov     r1, #0
  lsr     r5, r9, #24
  mov     sl, #0
  mov     r9, #-16777216 ; 0xff000000
  and     fp, r0, r9
  lsr     r6, ip, #8
  orr     r9, r7, r1
  and     ip, r4, sl
  orr     sl, r1, r2
  str     r6, [sp]
  str     r9, [sp, #32]
  str     sl, [sp, #36] ; 0x24
  add     r8, sp, #32
  ldm     r8, r7, r8
  str     r1, [sp, #4]
  ldm     sp, r9, sl
  orr     r7, r7, r9
  orr     r8, r8, sl
  str     r7, [sp, #32]
  str     r8, [sp, #36] ; 0x24
  mov     r3, r0
  mov     r7, #16711680 ; 0xff0000
  mov     r8, #0
  and     r9, r3, r7
  and     sl, r4, r8
  ldr     r0, [sp, #16]
  str     fp, [sp, #24]
  str     ip, [sp, #28]
  stm     sp, r9, sl
  ldr     r7, [sp, #20]
  ldr     sl, [sp, #12]
  ldr     fp, [sp, #12]
  ldr     r8, [sp, #28]
  lsr     r0, r0, #8
  orr     r7, r0, r7, lsl #24
  lsr     r6, sl, #24
  orr     r5, r5, fp, lsl #8
  lsl     sl, r8, #8
  mov     fp, r7
  add     r8, sp, #32
  ldm     r8, r7, r8
  orr     r6, r6, r8
  ldr     r8, [sp, #20]
  ldr     r0, [sp, #24]
  orr     r5, r5, r7
  lsr     r8, r8, #8
  orr     sl, sl, r0, lsr #24
  mov     ip, r8
  ldr     r0, [sp, #4]
  orr     fp, fp, r5
  ldr     r5, [sp, #24]
  orr     ip, ip, r6
  ldr     r6, [sp]
  lsl     r9, r5, #8
  lsl     r8, r0, #24
  orr     fp, fp, r9
  lsl     r3, r3, #8
  orr     r8, r8, r6, lsr #8
  orr     ip, ip, sl
  lsl     r7, r6, #24
  and     r5, r3, #16711680 ; 0xff0000
  orr     r7, r7, fp
  orr     r8, r8, ip
  orr     r4, r1, r7
  orr     r5, r5, r8
  mov     r9, r6
  mov     r1, r5
  mov     r0, r4
  add     sp, sp, #40 ; 0x28
  pop     r4, r5, r6, r7, r8, r9, sl, fp
  bx      lr
  

  That’s right, 91 instructions to move 8 bytes around a bit. GCC definitely has a problem with 64-bit numbers. It is perhaps worth noting that the bswap_64 macro in glibc splits the 64-bit value into 32-bit halves which are then reversed independently, thus side-stepping this weakness of gcc.

  As a side note, ARM RVCT (armcc) compiles those functions perfectly into one and two REV instructions, respectively.

  AVR32

  There is not much to report here. The latest gcc version available is 4.2.4, which doesn’t appear to have the bswap functions. The other three are handled nicely, even using a bit-reverse for __builtin_ctz.

  MIPS / MIPS64

  The situation MIPS is similar to ARM. Both bswap builtins result in external libgcc calls, the rest giving sensible code.

  PowerPC

  I scarcely believe my eyes, but this one is actually not bad. The PowerPC has no byte-reversal instructions, yet someone seems to have taken the time to teach gcc a good instruction sequence for this operation. The PowerPC does have some powerful rotate-and-mask instructions which come in handy here. First the 32-bit version :

  rotlwi  r0,r3,8
  rlwimi  r0,r3,24,0,7
  rlwimi  r0,r3,24,16,23
  mr      r3,r0
  blr
  

  The 64-bit byte-reversal simply applies the above code on each half of the value :

  rotlwi  r0,r3,8
  rlwimi  r0,r3,24,0,7
  rlwimi  r0,r3,24,16,23
  rotlwi  r3,r4,8
  rlwimi  r3,r4,24,0,7
  rlwimi  r3,r4,24,16,23
  mr      r4,r0
  blr
  

  Although I haven’t analysed that code carefully, it looks pretty good.

  PowerPC64

  Doing 64-bit operations is easier on a 64-bit CPU, right ? For you and me perhaps, but not for gcc. Here __builtin_bswap64 gives us the now familiar __bswapdi2 call, and while not as bad as the ARM version, it is not pretty :

  rldicr  r0,r3,8,55
  rldicr  r10,r3,56,7
  rldicr  r0,r0,56,15
  rldicl  r11,r3,8,56
  rldicr  r9,r3,16,47
  or      r11,r10,r11
  rldicr  r9,r9,48,23
  rldicl  r10,r0,24,40
  rldicr  r0,r3,24,39
  or      r11,r11,r10
  rldicl  r9,r9,40,24
  rldicr  r0,r0,40,31
  or      r9,r11,r9
  rlwinm  r10,r3,0,0,7
  rldicl  r0,r0,56,8
  or      r0,r9,r0
  rldicr  r10,r10,8,55
  rlwinm  r11,r3,0,8,15
  or      r0,r0,r10
  rldicr  r11,r11,24,39
  rlwinm  r3,r3,0,16,23
  or      r0,r0,r11
  rldicr  r3,r3,40,23
  or      r3,r0,r3
  blr
  

  That is 6 times longer than the (presumably) hand-written 32-bit version.

  x86 / x86_64

  As one might expect, results on x86 are good. All the tested functions use the available special instructions. One word of caution though : the bit-counting instructions are very slow on some implementations, specifically the Atom, AMD chips, and the notoriously slow Pentium4E.

  Conclusion

  In conclusion, I would say gcc builtins can be useful to avoid fragile inline assembler. Before using them, however, one should make sure they are not in fact harmful on the required targets. Not even those builtins mapping directly to CPU instructions can be trusted.