Recherche avancée

Sur d’autres sites (4472)

• ffmpeg record screen and save video file to disk as .mp4 or .mpg

  5 janvier 2015, par musimbate

  I want to record the screen of my pc (using gdigrab on my windows machine) and store the saved video file on my disk as an mp4 or mpg file .I have found an example piece of code that grabs the screen and shows it in an SDL window here :http://xwk.iteye.com/blog/2125720 (The code is on the bottom of the page and has an english version) and the ffmpeg muxing example https://ffmpeg.org/doxygen/trunk/muxing_8c-source.html seems to be able to help encode audio and video into a desired output video file.

  I have tried to combine these two by having a format context for grabbing the screen (AVFormatContext *pFormatCtx ; in my code ) and a separate format context to write the desired video file (AVFormatContext *outFormatContextEncoded ;).Within the loop to read packets from the input stream( screen grab stream) I directly encode write packets to the output file as shown in my code.I have kept the SDL code so I can see what I am recording.Below is my code with my modified write_video_frame() function .

  The code builds OK but the output video can’t be played by vlc. When I run the command

  ffmpeg -i filename.mpg

  I get this output

  [mpeg @ 003fed20] probed stream 0 failed
  
  [mpeg @ 003fed20] Stream #0: not enough frames to estimate rate; consider increasing probesize
  
  [mpeg @ 003fed20] Could not find codec parameters for stream 0 (Video: none): unknown codec
  
  Consider increasing the value for the 'analyzeduration' and 'probesize' options
  
  karamage.mpg: could not find codec parameters
  
  Input #0, mpeg, from 'karamage.mpg':
  
    Duration: 19:30:09.25, start: 37545.438756, bitrate: 2 kb/s
  
      Stream #0:0[0x1e0]: Video: none, 90k tbr, 90k tbn
  
  At least one output file must be specified

  Am I doing something wrong here ? I am new to ffmpeg and any guidance on this is highly appreciated.Thank you for your time.

  int main(int argc, char* argv[])
  
  {
  
  
  
      AVFormatContext *pFormatCtx;
  
  
  
      int             i, videoindex;
  
      AVCodecContext  *pCodecCtx;
  
      AVCodec         *pCodec;
  
  
  
      av_register_all();
  
      avformat_network_init();
  
  
  
      //Localy defined structure.
  
      OutputStream outVideoStream = { 0 };
  
  
  
      const char *filename;
  
      AVOutputFormat *outFormatEncoded;
  
      AVFormatContext *outFormatContextEncoded;
  
      AVCodec *videoCodec;
  
  
  
      filename="karamage.mpg";
  
  
  
      int ret1;
  
  
  
      int have_video = 0, have_audio = 0;
  
      int encode_video = 0, encode_audio = 0;
  
  
  
  
  
      AVDictionary *opt = NULL;
  
  
  
  
  
  
  
      //ASSIGN STH TO THE FORMAT CONTEXT.
  
      pFormatCtx = avformat_alloc_context();
  
  
  
      //
  
      //Use this when opening a local file.
  
      //char filepath[]="src01_480x272_22.h265";
  
      //avformat_open_input(&pFormatCtx,filepath,NULL,NULL)
  
  
  
      //Register Device
  
      avdevice_register_all();
  
  
  
      //Use gdigrab
  
      AVDictionary* options = NULL;
  
      //Set some options
  
      //grabbing frame rate
  
      //av_dict_set(&options,"framerate","5",0);
  
      //The distance from the left edge of the screen or desktop
  
      //av_dict_set(&options,"offset_x","20",0);
  
      //The distance from the top edge of the screen or desktop
  
      //av_dict_set(&options,"offset_y","40",0);
  
      //Video frame size. The default is to capture the full screen
  
      //av_dict_set(&options,"video_size","640x480",0);
  
      AVInputFormat *ifmt=av_find_input_format("gdigrab");
  
      if(avformat_open_input(&pFormatCtx,"desktop",ifmt,&options)!=0){
  
          printf("Couldn't open input stream.\n");
  
          return -1;
  
      }
  
  
  
      if(avformat_find_stream_info(pFormatCtx,NULL)<0)
  
      {
  
          printf("Couldn't find stream information.\n");
  
          return -1;
  
      }
  
      videoindex=-1;
  
      for(i=0; inb_streams; i++) 
  
          if(pFormatCtx->streams[i]->codec->codec_type==AVMEDIA_TYPE_VIDEO)
  
          {
  
              videoindex=i;
  
              break;
  
          }
  
      if(videoindex==-1)
  
      {
  
          printf("Didn't find a video stream.\n");
  
          return -1;
  
      }
  
      pCodecCtx=pFormatCtx->streams[videoindex]->codec;
  
      pCodec=avcodec_find_decoder(pCodecCtx->codec_id);
  
      if(pCodec==NULL)
  
      {
  
          printf("Codec not found.\n");
  
          return -1;
  
      }
  
      if(avcodec_open2(pCodecCtx, pCodec,NULL)<0)
  
      {
  
          printf("Could not open codec.\n");
  
          return -1;
  
      }
  
  
  
  
  
      AVFrame *pFrame,*pFrameYUV;
  
      pFrame=avcodec_alloc_frame();
  
      pFrameYUV=avcodec_alloc_frame();
  
  
  
      //PIX_FMT_YUV420P WHAT DOES THIS SAY ABOUT THE FORMAT??
  
      uint8_t *out_buffer=(uint8_t *)av_malloc(avpicture_get_size(PIX_FMT_YUV420P, pCodecCtx->width, pCodecCtx->height));
  
  
  
  
  
      avpicture_fill((AVPicture *)pFrameYUV, out_buffer, PIX_FMT_YUV420P, pCodecCtx->width, pCodecCtx->height);
  
  
  
      //<<<<<<<<<<<-------PREP WORK TO WRITE ENCODED VIDEO FILES-----
  
  
  
      avformat_alloc_output_context2(&outFormatContextEncoded, NULL, NULL, filename);
  
      if (!outFormatContextEncoded) {
  
          printf("Could not deduce output format from file extension: using MPEG.\n");
  
          avformat_alloc_output_context2(&outFormatContextEncoded, NULL, "mpeg", filename);
  
      }
  
      if (!outFormatContextEncoded)
  
          return 1;
  
  
  
      outFormatEncoded=outFormatContextEncoded->oformat;
  
  
  
  
  
       //THIS CREATES THE STREAMS(AUDIO AND VIDEO) ADDED TO OUR OUTPUT STREAM
  
  
  
      if (outFormatEncoded->video_codec != AV_CODEC_ID_NONE) {
  
  
  
          //YOUR VIDEO AND AUDIO PROPS ARE SET HERE.
  
          add_stream(&outVideoStream, outFormatContextEncoded, &videoCodec, outFormatEncoded->video_codec);
  
          have_video = 1;
  
          encode_video = 1;
  
      }
  
  
  
  
  
       // Now that all the parameters are set, we can open the audio and
  
       // video codecs and allocate the necessary encode buffers. 
  
      if (have_video)
  
          open_video(outFormatContextEncoded, videoCodec, &outVideoStream, opt);
  
  
  
       av_dump_format(outFormatContextEncoded, 0, filename, 1);
  
  
  
  
  
        /* open the output file, if needed */
  
      if (!(outFormatEncoded->flags & AVFMT_NOFILE)) {
  
          ret1 = avio_open(&outFormatContextEncoded->pb, filename, AVIO_FLAG_WRITE);
  
          if (ret1 < 0) {
  
              //fprintf(stderr, "Could not open '%s': %s\n", filename,
  
              //        av_err2str(ret));
  
              fprintf(stderr, "Could not open your dumb file.\n");
  
              return 1;
  
          }
  
      }
  
  
  
  
  
      /* Write the stream header, if any. */
  
      ret1 = avformat_write_header(outFormatContextEncoded, &opt);
  
      if (ret1 < 0) {
  
          //fprintf(stderr, "Error occurred when opening output file: %s\n",
  
           //       av_err2str(ret));
  
          fprintf(stderr, "Error occurred when opening output file\n");
  
          return 1;
  
      }
  
  
  
  
  
      //<<<<<<<<<<<-------PREP WORK TO WRITE ENCODED VIDEO FILES-----
  
  
  
      //SDL----------------------------
  
      if(SDL_Init(SDL_INIT_VIDEO | SDL_INIT_AUDIO | SDL_INIT_TIMER)) {  
  
          printf( "Could not initialize SDL - %s\n", SDL_GetError()); 
  
          return -1;
  
      } 
  
      int screen_w=640,screen_h=360;
  
      const SDL_VideoInfo *vi = SDL_GetVideoInfo();
  
      //Half of the Desktop's width and height.
  
      screen_w = vi->current_w/2;
  
      screen_h = vi->current_h/2;
  
      SDL_Surface *screen; 
  
      screen = SDL_SetVideoMode(screen_w, screen_h, 0,0);
  
  
  
      if(!screen) {  
  
          printf("SDL: could not set video mode - exiting:%s\n",SDL_GetError());  
  
          return -1;
  
      }
  
      SDL_Overlay *bmp; 
  
      bmp = SDL_CreateYUVOverlay(pCodecCtx->width, pCodecCtx->height,SDL_YV12_OVERLAY, screen); 
  
      SDL_Rect rect;
  
      //SDL End------------------------
  
      int ret, got_picture;
  
  
  
      AVPacket *packet=(AVPacket *)av_malloc(sizeof(AVPacket));
  
  
  
      //TRY TO INIT THE PACKET HERE
  
       av_init_packet(packet);
  
  
  
  
  
      //Output Information-----------------------------
  
      printf("File Information---------------------\n");
  
      av_dump_format(pFormatCtx,0,NULL,0);
  
      printf("-------------------------------------------------\n");
  
  
  
      struct SwsContext *img_convert_ctx;
  
      img_convert_ctx = sws_getContext(pCodecCtx->width, pCodecCtx->height, pCodecCtx->pix_fmt, pCodecCtx->width, pCodecCtx->height, PIX_FMT_YUV420P, SWS_BICUBIC, NULL, NULL, NULL); 
  
      //------------------------------
  
      //
  
      while(av_read_frame(pFormatCtx, packet)>=0)
  
      {
  
  
  
          if(packet->stream_index==videoindex)
  
          {
  
              //HERE WE DECODE THE PACKET INTO THE FRAME
  
              ret = avcodec_decode_video2(pCodecCtx, pFrame, &got_picture, packet);
  
              if(ret < 0)
  
              {
  
                  printf("Decode Error.\n");
  
                  return -1;
  
              }
  
              if(got_picture)
  
              {
  
  
  
                  //THIS IS WHERE WE DO STH WITH THE FRAME WE JUST GOT FROM THE STREAM
  
                  //FREE AREA--START
  
                  //IN HERE YOU CAN WORK WITH THE FRAME OF THE PACKET.
  
                  write_video_frame(outFormatContextEncoded, &outVideoStream,packet);
  
  
  
  
  
                  //FREE AREA--END
  
                  sws_scale(img_convert_ctx, (const uint8_t* const*)pFrame->data, pFrame->linesize, 0, pCodecCtx->height, pFrameYUV->data, pFrameYUV->linesize);
  
  
  
  
  
                  SDL_LockYUVOverlay(bmp);
  
                  bmp->pixels[0]=pFrameYUV->data[0];
  
                  bmp->pixels[2]=pFrameYUV->data[1];
  
                  bmp->pixels[1]=pFrameYUV->data[2];     
  
                  bmp->pitches[0]=pFrameYUV->linesize[0];
  
                  bmp->pitches[2]=pFrameYUV->linesize[1];   
  
                  bmp->pitches[1]=pFrameYUV->linesize[2];
  
                  SDL_UnlockYUVOverlay(bmp); 
  
                  rect.x = 0;    
  
                  rect.y = 0;    
  
                  rect.w = screen_w;    
  
                  rect.h = screen_h;  
  
                  SDL_DisplayYUVOverlay(bmp, &rect); 
  
                  //Delay 40ms----WHY THIS DELAY????
  
                  SDL_Delay(40);
  
              }
  
          }
  
          av_free_packet(packet);
  
      }//THE LOOP TO PULL PACKETS FROM THE FORMAT CONTEXT ENDS HERE.
  
  
  
      //AFTER THE WHILE LOOP WE DO SOME CLEANING
  
  
  
      //av_read_pause(context);
  
  
  
  
  
       av_write_trailer(outFormatContextEncoded);
  
       close_stream(outFormatContextEncoded, &outVideoStream);
  
       if (!(outFormatContextEncoded->flags & AVFMT_NOFILE))
  
          /* Close the output file. */
  
          avio_close(outFormatContextEncoded->pb);
  
  
  
      /* free the stream */
  
      avformat_free_context(outFormatContextEncoded);
  
  
  
  
  
  
  
      //STOP DOING YOUR CLEANING
  
      sws_freeContext(img_convert_ctx);
  
  
  
  
  
  
  
      SDL_Quit();
  
  
  
      av_free(out_buffer);
  
      av_free(pFrameYUV);
  
      avcodec_close(pCodecCtx);
  
      avformat_close_input(&pFormatCtx);
  
  
  
      return 0;
  
  }
  
  
  
  
  
  
  
  /*
  
   * encode one video frame and send it to the muxer
  
   * return 1 when encoding is finished, 0 otherwise
  
   */
  
  static int write_video_frame(AVFormatContext *oc, OutputStream *ost,AVPacket * pkt11)
  
  {
  
      int ret;
  
      AVCodecContext *c;
  
      AVFrame *frame;
  
      int got_packet = 0;
  
  
  
      c = ost->st->codec;
  
  
  
      //DO NOT NEED THIS FRAME.
  
      //frame = get_video_frame(ost);
  
  
  
      if (oc->oformat->flags & AVFMT_RAWPICTURE) {
  
  
  
          //IGNORE THIS FOR A MOMENT
  
          /* a hack to avoid data copy with some raw video muxers */
  
          AVPacket pkt;
  
          av_init_packet(&pkt);
  
  
  
          if (!frame)
  
              return 1;
  
  
  
          pkt.flags        |= AV_PKT_FLAG_KEY;
  
          pkt.stream_index  = ost->st->index;
  
          pkt.data          = (uint8_t *)frame;
  
          pkt.size          = sizeof(AVPicture);
  
  
  
          pkt.pts = pkt.dts = frame->pts;
  
          av_packet_rescale_ts(&pkt, c->time_base, ost->st->time_base);
  
  
  
          ret = av_interleaved_write_frame(oc, &pkt);
  
      } else {
  
  
  
              ret = write_frame(oc, &c->time_base, ost->st, pkt11);
  
  
  
      }
  
  
  
      if (ret < 0) {
  
          fprintf(stderr, "Error while writing video frame: %s\n");
  
          exit(1);
  
      }
  
  
  
  
  
      return 1;
  
  }

• Revision 29747 : On incrémente la version du plugin

  8 juillet 2009, par kent1@… — Log

  On incrémente la version du plugin

• Make better marketing decisions with attribution modeling

  19 décembre 2017, par InnoCraft

  Do you suspect some traffic sources are not getting the rewards they deserve ? Do you want to know how much credit each of your marketing channel actually gets ?

  When you look at which referrers contribute the most to your goal conversions or purchases, Matomo (Piwik) shows you only the referrer of the last visit. However, in reality, a visitor often visits a website multiple times from different referrers before they convert a goal. Giving all credit to the referrer of the last visit ignores all other referrers that contributed to a conversion as well.

  You can now push your marketing analysis to the next level with attribution modeling and finally discover the true value of all your marketing channels. As a result, you will be able to shift your marketing efforts and spending accordingly to maximize your success and stop wasting resources. In marketing, studying this data is called attribution modeling.

  Get the true value of your referrers

  Attribution is a premium feature that you can easily purchase from the Matomo (Piwik) marketplace.

  Once installed, you will be able to :

  • identify valuable referrers that you did not see before
  • invest in potential new partners
  • attribute a new level of conversion
  • make this work very easily by filling just a couple of form information

  Identify valuable referrers that you did not see before

  You probably have hundreds or even thousands of different sources listed within the referrer reports. We also guess that you have the feeling that it is always the same referrers which are credited of conversions.
  Guess what, those data are probably biased or at least are not telling you the whole story.
  Why ? Because by default, Matomo (Piwik) only attributes all credit to the last referrer.

  

  It is likely that many non credited sources played a role in the conversion process as well as people often visit your website several times before converting and they may come from different referrers.

  This is exactly where attribution modeling comes into play. With attribution modeling, you can decide which touchpoint you want to study. For example, you can choose to give credit to all the referrers a single visitor came from each time the user visits your website, and not only look at the last one. Without this feature, chances are, that you have spent too much money and / or efforts on the wrong referrer channels in the past because many referrers that contributed to conversions were ignored. Based on the insights you get by applying different attribution models, you can make better decisions on where to shift your marketing spending and efforts.

  Invest in potential new partners

  Once you apply different attribution models, you will find out that you need to consider a new list of referrers which you before either over- or under-estimated in terms of how much they contributed to your conversions. You probably did not identify those sources before because Matomo (Piwik) shows only the last referrer before a conversion. But you can now also look at what these newly discovered referrers are saying about your company, looking for any advertising programs they may offer, getting in contact with the owner of the website, and more.

  Apply up to 6 different attribution models

  By default, Matomo (Piwik) is attributing the conversion to the last referrer only. With attribution modeling you can analyze 6 different models :

  • Last Interaction : the conversion is attributed to the last referrer, even if it is a direct access.
  • Last Non-Direct : the conversion is attributed to the last referrer, but not in the case of a direct access.
  • First Interaction : the conversion is attributed to the first referrer which brought you the visit.
  • Linear : whatever the number of referrers which brought you the conversion, they will all get the same value.
  • Position Based : first and last referrer will be attributed 40% each the conversion value, the remaining 60% is divided between the rest of the referrers.
  • Time Decay : this attribution model means that the closer to the date of the conversion is, the more your last referrers will get credit.

  Those attribution models will enable you to analyze all your referrers deeply and increase your conversions.

  Let’s look at an example where we are comparing two models : “last interaction” and “first interaction”. Our goal is to identify whether some referrers that we are currently considering as less important, are finally playing a serious role in the total amount of conversions :

  

  Comparing Last Interaction model to First Interaction model

  Here it is interesting to observe that the website www.hongkiat.com is bringing almost 90% conversion more with the first interaction model rather than the last one.

  As a result we can look at this website and take the following actions :

  • have a look at the message on this website
  • look at opportunities to change the message
  • look at opportunities to display extra marketing messages
  • get in contact with the owner to identify any other communication opportunities

  The Multi Channel Attribution report

  Attribution modeling in Matomo (Piwik) does not require you to add any tracking code. The only thing you need is to install the plugin and let the magic happen.
  Simple as pie is the word you should keep in mind for this feature. Once installed, you will find the report within the goal section, just above the goals you created :

  

  The Multi Attribution menu

  There you can select the attribution model you would like to apply or compare.

  Attribution modeling is not just about playing with a new report. It is above all an opportunity to increase the number of conversions by identifying referrers that you may have not recognized as valuable in the past. To grow your business, it is crucial to identify the most (and least) successful channels correctly so you can spend your time and money wisely.

  Learn more about Multi Channel Conversion Attribution

  The post Make better marketing decisions with attribution modeling appeared first on Analytics Platform - Matomo.