Recherche avancée

Médias (0)

Mot : - Tags -/navigation

Aucun média correspondant à vos critères n’est disponible sur le site.

Autres articles (21)

  • Other interesting software

    13 avril 2011, par

    We don’t claim to be the only ones doing what we do ... and especially not to assert claims to be the best either ... What we do, we just try to do it well and getting better ...
    The following list represents softwares that tend to be more or less as MediaSPIP or that MediaSPIP tries more or less to do the same, whatever ...
    We don’t know them, we didn’t try them, but you can take a peek.
    Videopress
    Website : http://videopress.com/
    License : GNU/GPL v2
    Source code : (...)

  • Pas question de marché, de cloud etc...

    10 avril 2011

    Le vocabulaire utilisé sur ce site essaie d’éviter toute référence à la mode qui fleurit allègrement
    sur le web 2.0 et dans les entreprises qui en vivent.
    Vous êtes donc invité à bannir l’utilisation des termes "Brand", "Cloud", "Marché" etc...
    Notre motivation est avant tout de créer un outil simple, accessible à pour tout le monde, favorisant
    le partage de créations sur Internet et permettant aux auteurs de garder une autonomie optimale.
    Aucun "contrat Gold ou Premium" n’est donc prévu, aucun (...)

  • Qualité du média après traitement

    21 juin 2013, par

    Le bon réglage du logiciel qui traite les média est important pour un équilibre entre les partis ( bande passante de l’hébergeur, qualité du média pour le rédacteur et le visiteur, accessibilité pour le visiteur ). Comment régler la qualité de son média ?
    Plus la qualité du média est importante, plus la bande passante sera utilisée. Le visiteur avec une connexion internet à petit débit devra attendre plus longtemps. Inversement plus, la qualité du média est pauvre et donc le média devient dégradé voire (...)

Sur d’autres sites (3963)

  • ffmpeg performance on raspberry pi

    20 août 2021, par Rudi

    I'm running ffmpeg on a rasperry pi 4. I'm capturing the signal of an usb device.

    


    ffprobes output is :

    


    pi@skycam:~ $ ffprobe /dev/video0
ffprobe version 4.1.4-1+rpt7~deb10u1 Copyright (c) 2007-2019 the FFmpeg developers
  built with gcc 8 (Raspbian 8.3.0-6+rpi1)
  configuration: --prefix=/usr --extra-version='1+rpt7~deb10u1' --toolchain=hardened --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl --disable-stripping --enable-avresample --disable-filter=resample --enable-avisynth --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librsvg --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opengl --enable-sdl2 --enable-omx-rpi --enable-mmal --enable-neon --enable-rpi --enable-libdc1394 --enable-libdrm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --enable-shared --libdir=/usr/lib/arm-linux-gnueabihf --cpu=arm1176jzf-s --arch=arm
  WARNING: library configuration mismatch
  avutil      configuration: --prefix=/usr --extra-version='1+rpt7~deb10u1' --toolchain=hardened --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl --disable-stripping --enable-avresample --disable-filter=resample --enable-avisynth --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librsvg --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opengl --enable-sdl2 --enable-omx-rpi --enable-mmal --enable-neon --enable-rpi --enable-libdc1394 --enable-libdrm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7 --arch=armv6t2 --disable-thumb --enable-shared --disable-doc --disable-programs
  avcodec     configuration: --prefix=/usr --extra-version='1+rpt7~deb10u1' --toolchain=hardened --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl --disable-stripping --enable-avresample --disable-filter=resample --enable-avisynth --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librsvg --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opengl --enable-sdl2 --enable-omx-rpi --enable-mmal --enable-neon --enable-rpi --enable-libdc1394 --enable-libdrm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7 --arch=armv6t2 --disable-thumb --enable-shared --disable-doc --disable-programs
  avformat    configuration: --prefix=/usr --extra-version='1+rpt7~deb10u1' --toolchain=hardened --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl --disable-stripping --enable-avresample --disable-filter=resample --enable-avisynth --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librsvg --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opengl --enable-sdl2 --enable-omx-rpi --enable-mmal --enable-neon --enable-rpi --enable-libdc1394 --enable-libdrm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7 --arch=armv6t2 --disable-thumb --enable-shared --disable-doc --disable-programs
  avdevice    configuration: --prefix=/usr --extra-version='1+rpt7~deb10u1' --toolchain=hardened --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl --disable-stripping --enable-avresample --disable-filter=resample --enable-avisynth --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librsvg --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opengl --enable-sdl2 --enable-omx-rpi --enable-mmal --enable-neon --enable-rpi --enable-libdc1394 --enable-libdrm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7 --arch=armv6t2 --disable-thumb --enable-shared --disable-doc --disable-programs
  avfilter    configuration: --prefix=/usr --extra-version='1+rpt7~deb10u1' --toolchain=hardened --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl --disable-stripping --enable-avresample --disable-filter=resample --enable-avisynth --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librsvg --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opengl --enable-sdl2 --enable-omx-rpi --enable-mmal --enable-neon --enable-rpi --enable-libdc1394 --enable-libdrm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7 --arch=armv6t2 --disable-thumb --enable-shared --disable-doc --disable-programs
  avresample  configuration: --prefix=/usr --extra-version='1+rpt7~deb10u1' --toolchain=hardened --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl --disable-stripping --enable-avresample --disable-filter=resample --enable-avisynth --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librsvg --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opengl --enable-sdl2 --enable-omx-rpi --enable-mmal --enable-neon --enable-rpi --enable-libdc1394 --enable-libdrm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7 --arch=armv6t2 --disable-thumb --enable-shared --disable-doc --disable-programs
  swscale     configuration: --prefix=/usr --extra-version='1+rpt7~deb10u1' --toolchain=hardened --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl --disable-stripping --enable-avresample --disable-filter=resample --enable-avisynth --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librsvg --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opengl --enable-sdl2 --enable-omx-rpi --enable-mmal --enable-neon --enable-rpi --enable-libdc1394 --enable-libdrm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7 --arch=armv6t2 --disable-thumb --enable-shared --disable-doc --disable-programs
  swresample  configuration: --prefix=/usr --extra-version='1+rpt7~deb10u1' --toolchain=hardened --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl --disable-stripping --enable-avresample --disable-filter=resample --enable-avisynth --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librsvg --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opengl --enable-sdl2 --enable-omx-rpi --enable-mmal --enable-neon --enable-rpi --enable-libdc1394 --enable-libdrm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7 --arch=armv6t2 --disable-thumb --enable-shared --disable-doc --disable-programs
  postproc    configuration: --prefix=/usr --extra-version='1+rpt7~deb10u1' --toolchain=hardened --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl --disable-stripping --enable-avresample --disable-filter=resample --enable-avisynth --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librsvg --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opengl --enable-sdl2 --enable-omx-rpi --enable-mmal --enable-neon --enable-rpi --enable-libdc1394 --enable-libdrm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7 --arch=armv6t2 --disable-thumb --enable-shared --disable-doc --disable-programs
  libavutil      56. 22.100 / 56. 22.100
  libavcodec     58. 35.100 / 58. 35.100
  libavformat    58. 20.100 / 58. 20.100
  libavdevice    58.  5.100 / 58.  5.100
  libavfilter     7. 40.101 /  7. 40.101
  libavresample   4.  0.  0 /  4.  0.  0
  libswscale      5.  3.100 /  5.  3.100
  libswresample   3.  3.100 /  3.  3.100
  libpostproc    55.  3.100 / 55.  3.100
Input #0, video4linux2,v4l2, from '/dev/video0':
  Duration: N/A, start: 1230.660915, bitrate: 1990656 kb/s
    Stream #0:0: Video: rawvideo (YUY2 / 0x32595559), yuyv422, 1920x1080, 1990656 kb/s, 60 fps, 60 tbr, 1000k tbn, 1000k tbc


    


    the ffmpeg call i'm using is :

    


    bin/ffmpeg -loglevel quiet -re -f v4l2 -i /dev/video0 -tune zerolatency -preset ultrafast -pix_fmt yuv420p out.mkv


    


    put the framerate starts at around 20 and increases slowly to 36. Also when reviewing the output videos i feel like i see a bit of a framedrop so the video is not as smooth as the input.

    


    Is this due to a lack of power of the raspberry or are there any tweaks i could use to improve performance ? I don't care about the output format, framerate or resolution

    


    thank you very much

    


  • Why is the filesize different when swapping audio tracks using ffmeg ?

    20 août 2021, par Brian

    I have a movie that I have encoded using Handbrake on a Mac a long time ago. When I encoded the movie, I put the stereo audio as track 1 and the 5.1 audio as track 2. The starting filesize is 853,320,914 bytes. Below is the data from ffprobe.

    


    ffprobe version 4.2.1-tessus  https://evermeet.cx/ffmpeg/  Copyright (c) 2007-2019 the FFmpeg developers
  built with Apple LLVM version 10.0.1 (clang-1001.0.46.4)
  configuration: --cc=/usr/bin/clang --prefix=/opt/ffmpeg --extra-version=tessus --enable-avisynth --enable-fontconfig --enable-gpl --enable-libaom --enable-libass --enable-libbluray --enable-libdav1d --enable-libfreetype --enable-libgsm --enable-libmodplug --enable-libmp3lame --enable-libmysofa --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenh264 --enable-libopenjpeg --enable-libopus --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvmaf --enable-libvo-amrwbenc --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxavs --enable-libxvid --enable-libzimg --enable-libzmq --enable-libzvbi --enable-version3 --pkg-config-flags=--static --disable-ffplay
  libavutil      56. 31.100 / 56. 31.100
  libavcodec     58. 54.100 / 58. 54.100
  libavformat    58. 29.100 / 58. 29.100
  libavdevice    58.  8.100 / 58.  8.100
  libavfilter     7. 57.100 /  7. 57.100
  libswscale      5.  5.100 /  5.  5.100
  libswresample   3.  5.100 /  3.  5.100
  libpostproc    55.  5.100 / 55.  5.100
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'Annabelle - Comes Home (2019).m4v':
  Metadata:
    major_brand     : mp42
    minor_version   : 512
    compatible_brands: isomiso2avc1mp41
    creation_time   : 2020-04-06T22:40:36.000000Z
    encoder         : HandBrake 1.1.2 2018090500
  Duration: 01:46:04.86, start: 0.000000, bitrate: 1072 kb/s
    Chapter #0:0: start 0.000000, end 476.986000
    Metadata:
      title           : Chapter 1
    Chapter #0:1: start 476.986000, end 933.608000
    Metadata:
      title           : Chapter 2
    Chapter #0:2: start 933.608000, end 1441.449000
    Metadata:
      title           : Chapter 3
    Chapter #0:3: start 1441.449000, end 1976.358000
    Metadata:
      title           : Chapter 4
    Chapter #0:4: start 1976.358000, end 2579.753000
    Metadata:
      title           : Chapter 5
    Chapter #0:5: start 2579.753000, end 3149.030000
    Metadata:
      title           : Chapter 6
    Chapter #0:6: start 3149.030000, end 3726.941000
    Metadata:
      title           : Chapter 7
    Chapter #0:7: start 3726.941000, end 3973.520000
    Metadata:
      title           : Chapter 8
    Chapter #0:8: start 3973.520000, end 4504.676000
    Metadata:
      title           : Chapter 9
    Chapter #0:9: start 4504.676000, end 4904.409000
    Metadata:
      title           : Chapter 10
    Chapter #0:10: start 4904.409000, end 5421.592000
    Metadata:
      title           : Chapter 11
    Chapter #0:11: start 5421.592000, end 5998.001000
    Metadata:
      title           : Chapter 12
    Chapter #0:12: start 5998.001000, end 6364.075000
    Metadata:
      title           : Chapter 13
    Stream #0:0(und): Video: h264 (Constrained Baseline) (avc1 / 0x31637661), yuv420p(tv, smpte170m/smpte170m/bt709), 720x360 [SAR 32:27 DAR 64:27], 519 kb/s, 23.98 fps, 23.98 tbr, 90k tbn, 180k tbc (default)
    Metadata:
      creation_time   : 2020-04-06T22:40:36.000000Z
      handler_name    : VideoHandler
    Stream #0:1(eng): Audio: aac (LC) (mp4a / 0x6134706D), 48000 Hz, stereo, fltp, 162 kb/s (default)
    Metadata:
      creation_time   : 2020-04-06T22:40:36.000000Z
      handler_name    : Stereo
    Stream #0:2(eng): Audio: ac3 (ac-3 / 0x332D6361), 48000 Hz, 5.1(side), fltp, 384 kb/s
    Metadata:
      creation_time   : 2020-04-06T22:40:36.000000Z
      handler_name    : Surround
    Side data:
      audio service type: main
    Stream #0:3(eng): Data: bin_data (text / 0x74786574)
    Metadata:
      creation_time   : 2020-04-06T22:40:36.000000Z
      handler_name    : SubtitleHandler
Unsupported codec with id 100359 for input stream 3


    


    My goal is to swap the stereo audio track with the 5.1 audio track and make the 5.1 audio track the default without having to reencode. To do this, I used the following command :

    


    ffmpeg -i "Annabelle - Comes Home (2019)/Annabelle - Comes Home (2019)_old.m4v" -map 0:v:0 -map 0:a:1 -map 0:a:0 -disposition:a:0 default -disposition:a:1 none -c copy "Annabelle - Comes Home (2019)/Annabelle - Comes Home (2019).m4v"

    


    Everything works as it should, I think anyways as I didn't get any errors...

    


    ffmpeg version 4.2.1-tessus  https://evermeet.cx/ffmpeg/  Copyright (c) 2000-2019 the FFmpeg developers
  built with Apple LLVM version 10.0.1 (clang-1001.0.46.4)
  configuration: --cc=/usr/bin/clang --prefix=/opt/ffmpeg --extra-version=tessus --enable-avisynth --enable-fontconfig --enable-gpl --enable-libaom --enable-libass --enable-libbluray --enable-libdav1d --enable-libfreetype --enable-libgsm --enable-libmodplug --enable-libmp3lame --enable-libmysofa --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenh264 --enable-libopenjpeg --enable-libopus --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvmaf --enable-libvo-amrwbenc --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxavs --enable-libxvid --enable-libzimg --enable-libzmq --enable-libzvbi --enable-version3 --pkg-config-flags=--static --disable-ffplay
  libavutil      56. 31.100 / 56. 31.100
  libavcodec     58. 54.100 / 58. 54.100
  libavformat    58. 29.100 / 58. 29.100
  libavdevice    58.  8.100 / 58.  8.100
  libavfilter     7. 57.100 /  7. 57.100
  libswscale      5.  5.100 /  5.  5.100
  libswresample   3.  5.100 /  3.  5.100
  libpostproc    55.  5.100 / 55.  5.100
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'Annabelle - Comes Home (2019)/Annabelle - Comes Home (2019)_old.m4v':
  Metadata:
    major_brand     : mp42
    minor_version   : 512
    compatible_brands: isomiso2avc1mp41
    creation_time   : 2020-04-06T22:40:36.000000Z
    encoder         : HandBrake 1.1.2 2018090500
  Duration: 01:46:04.86, start: 0.000000, bitrate: 1072 kb/s
    Chapter #0:0: start 0.000000, end 476.986000
    Metadata:
      title           : Chapter 1
    Chapter #0:1: start 476.986000, end 933.608000
    Metadata:
      title           : Chapter 2
    Chapter #0:2: start 933.608000, end 1441.449000
    Metadata:
      title           : Chapter 3
    Chapter #0:3: start 1441.449000, end 1976.358000
    Metadata:
      title           : Chapter 4
    Chapter #0:4: start 1976.358000, end 2579.753000
    Metadata:
      title           : Chapter 5
    Chapter #0:5: start 2579.753000, end 3149.030000
    Metadata:
      title           : Chapter 6
    Chapter #0:6: start 3149.030000, end 3726.941000
    Metadata:
      title           : Chapter 7
    Chapter #0:7: start 3726.941000, end 3973.520000
    Metadata:
      title           : Chapter 8
    Chapter #0:8: start 3973.520000, end 4504.676000
    Metadata:
      title           : Chapter 9
    Chapter #0:9: start 4504.676000, end 4904.409000
    Metadata:
      title           : Chapter 10
    Chapter #0:10: start 4904.409000, end 5421.592000
    Metadata:
      title           : Chapter 11
    Chapter #0:11: start 5421.592000, end 5998.001000
    Metadata:
      title           : Chapter 12
    Chapter #0:12: start 5998.001000, end 6364.075000
    Metadata:
      title           : Chapter 13
    Stream #0:0(und): Video: h264 (Constrained Baseline) (avc1 / 0x31637661), yuv420p(tv, smpte170m/smpte170m/bt709), 720x360 [SAR 32:27 DAR 64:27], 519 kb/s, 23.98 fps, 23.98 tbr, 90k tbn, 180k tbc (default)
    Metadata:
      creation_time   : 2020-04-06T22:40:36.000000Z
      handler_name    : VideoHandler
    Stream #0:1(eng): Audio: aac (LC) (mp4a / 0x6134706D), 48000 Hz, stereo, fltp, 162 kb/s (default)
    Metadata:
      creation_time   : 2020-04-06T22:40:36.000000Z
      handler_name    : Stereo
    Stream #0:2(eng): Audio: ac3 (ac-3 / 0x332D6361), 48000 Hz, 5.1(side), fltp, 384 kb/s
    Metadata:
      creation_time   : 2020-04-06T22:40:36.000000Z
      handler_name    : Surround
    Side data:
      audio service type: main
    Stream #0:3(eng): Data: bin_data (text / 0x74786574)
    Metadata:
      creation_time   : 2020-04-06T22:40:36.000000Z
      handler_name    : SubtitleHandler
[ipod @ 0x7faff0014000] track 1: codec frame size is not set
Output #0, ipod, to 'Annabelle - Comes Home (2019)/Annabelle - Comes Home (2019).m4v':
  Metadata:
    major_brand     : mp42
    minor_version   : 512
    compatible_brands: isomiso2avc1mp41
    encoder         : Lavf58.29.100
    Chapter #0:0: start 0.000000, end 476.986000
    Metadata:
      title           : Chapter 1
    Chapter #0:1: start 476.986000, end 933.608000
    Metadata:
      title           : Chapter 2
    Chapter #0:2: start 933.608000, end 1441.449000
    Metadata:
      title           : Chapter 3
    Chapter #0:3: start 1441.449000, end 1976.358000
    Metadata:
      title           : Chapter 4
    Chapter #0:4: start 1976.358000, end 2579.753000
    Metadata:
      title           : Chapter 5
    Chapter #0:5: start 2579.753000, end 3149.030000
    Metadata:
      title           : Chapter 6
    Chapter #0:6: start 3149.030000, end 3726.941000
    Metadata:
      title           : Chapter 7
    Chapter #0:7: start 3726.941000, end 3973.520000
    Metadata:
      title           : Chapter 8
    Chapter #0:8: start 3973.520000, end 4504.676000
    Metadata:
      title           : Chapter 9
    Chapter #0:9: start 4504.676000, end 4904.409000
    Metadata:
      title           : Chapter 10
    Chapter #0:10: start 4904.409000, end 5421.592000
    Metadata:
      title           : Chapter 11
    Chapter #0:11: start 5421.592000, end 5998.001000
    Metadata:
      title           : Chapter 12
    Chapter #0:12: start 5998.001000, end 6364.075000
    Metadata:
      title           : Chapter 13
    Stream #0:0(und): Video: h264 (Constrained Baseline) (avc1 / 0x31637661), yuv420p(tv, smpte170m/smpte170m/bt709), 720x360 [SAR 32:27 DAR 64:27], q=2-31, 519 kb/s, 23.98 fps, 23.98 tbr, 90k tbn, 90k tbc (default)
    Metadata:
      creation_time   : 2020-04-06T22:40:36.000000Z
      handler_name    : VideoHandler
    Stream #0:1(eng): Audio: ac3 (ac-3 / 0x332D6361), 48000 Hz, 5.1(side), fltp, 384 kb/s (default)
    Metadata:
      creation_time   : 2020-04-06T22:40:36.000000Z
      handler_name    : Surround
    Side data:
      audio service type: main
    Stream #0:2(eng): Audio: aac (LC) (mp4a / 0x6134706D), 48000 Hz, stereo, fltp, 162 kb/s
    Metadata:
      creation_time   : 2020-04-06T22:40:36.000000Z
      handler_name    : Stereo
Stream mapping:
  Stream #0:0 -> #0:0 (copy)
  Stream #0:2 -> #0:1 (copy)
  Stream #0:1 -> #0:2 (copy)
Press [q] to stop, [?] for help
frame=152602 fps=12872 q=-1.0 Lsize=  834270kB time=01:46:04.79 bitrate=1073.8kbits/s speed= 537x    
video:403702kB audio:424714kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 0.706676%


    


    Here is the resulting ffprobe of the new file showing it swapped the audio tracks :

    


    ffprobe version 4.2.1-tessus  https://evermeet.cx/ffmpeg/  Copyright (c) 2007-2019 the FFmpeg developers
  built with Apple LLVM version 10.0.1 (clang-1001.0.46.4)
  configuration: --cc=/usr/bin/clang --prefix=/opt/ffmpeg --extra-version=tessus --enable-avisynth --enable-fontconfig --enable-gpl --enable-libaom --enable-libass --enable-libbluray --enable-libdav1d --enable-libfreetype --enable-libgsm --enable-libmodplug --enable-libmp3lame --enable-libmysofa --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenh264 --enable-libopenjpeg --enable-libopus --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvmaf --enable-libvo-amrwbenc --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxavs --enable-libxvid --enable-libzimg --enable-libzmq --enable-libzvbi --enable-version3 --pkg-config-flags=--static --disable-ffplay
  libavutil      56. 31.100 / 56. 31.100
  libavcodec     58. 54.100 / 58. 54.100
  libavformat    58. 29.100 / 58. 29.100
  libavdevice    58.  8.100 / 58.  8.100
  libavfilter     7. 57.100 /  7. 57.100
  libswscale      5.  5.100 /  5.  5.100
  libswresample   3.  5.100 /  3.  5.100
  libpostproc    55.  5.100 / 55.  5.100
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'Annabelle - Comes Home (2019).m4v':
  Metadata:
    major_brand     : M4V 
    minor_version   : 512
    compatible_brands: isomiso2avc1
    encoder         : Lavf58.29.100
  Duration: 01:46:04.86, start: 0.000000, bitrate: 1073 kb/s
    Chapter #0:0: start 0.000000, end 476.986000
    Metadata:
      title           : Chapter 1
    Chapter #0:1: start 476.986000, end 933.608000
    Metadata:
      title           : Chapter 2
    Chapter #0:2: start 933.608000, end 1441.449000
    Metadata:
      title           : Chapter 3
    Chapter #0:3: start 1441.449000, end 1976.358000
    Metadata:
      title           : Chapter 4
    Chapter #0:4: start 1976.358000, end 2579.753000
    Metadata:
      title           : Chapter 5
    Chapter #0:5: start 2579.753000, end 3149.030000
    Metadata:
      title           : Chapter 6
    Chapter #0:6: start 3149.030000, end 3726.941000
    Metadata:
      title           : Chapter 7
    Chapter #0:7: start 3726.941000, end 3973.520000
    Metadata:
      title           : Chapter 8
    Chapter #0:8: start 3973.520000, end 4504.676000
    Metadata:
      title           : Chapter 9
    Chapter #0:9: start 4504.676000, end 4904.409000
    Metadata:
      title           : Chapter 10
    Chapter #0:10: start 4904.409000, end 5421.592000
    Metadata:
      title           : Chapter 11
    Chapter #0:11: start 5421.592000, end 5998.001000
    Metadata:
      title           : Chapter 12
    Chapter #0:12: start 5998.001000, end 6364.075000
    Metadata:
      title           : Chapter 13
    Stream #0:0(und): Video: h264 (Constrained Baseline) (avc1 / 0x31637661), yuv420p(tv, smpte170m/smpte170m/bt709), 720x360 [SAR 32:27 DAR 64:27], 519 kb/s, 23.98 fps, 23.98 tbr, 90k tbn, 180k tbc (default)
    Metadata:
      handler_name    : VideoHandler
    Stream #0:1(eng): Audio: ac3 (ac-3 / 0x332D6361), 48000 Hz, 5.1(side), fltp, 384 kb/s (default)
    Metadata:
      handler_name    : Surround
    Side data:
      audio service type: main
    Stream #0:2(eng): Audio: aac (LC) (mp4a / 0x6134706D), 48000 Hz, stereo, fltp, 162 kb/s
    Metadata:
      handler_name    : Stereo
    Stream #0:3(eng): Data: bin_data (text / 0x74786574)
    Metadata:
      handler_name    : SubtitleHandler
Unsupported codec with id 100359 for input stream 3


    


    What I don't understand is why is the file size different ? The resulting file is larger at 854,292,790 bytes. Shouldn't the file sizes be the same since I literally just swapped tracks 0 and 1 ?

    


  • Anomalie #4832 (Nouveau) : Passer les bulles de gifs animées sur les syndications en erreur en SVG...

    23 juin 2021

    Il reste des gifs pas très jojo sur le plugin.
    À remplacer par https://www.florin-pop.com/blog/2019/03/css-pulse-effect/ par exemple.

Navigation