Recherche avancée

Médias (1)

Mot : - Tags -/illustrator

Autres articles (95)

  • MediaSPIP 0.1 Beta version

    25 avril 2011, par

    MediaSPIP 0.1 beta is the first version of MediaSPIP proclaimed as "usable".
    The zip file provided here only contains the sources of MediaSPIP in its standalone version.
    To get a working installation, you must manually install all-software dependencies on the server.
    If you want to use this archive for an installation in "farm mode", you will also need to proceed to other manual (...)

  • Multilang : améliorer l’interface pour les blocs multilingues

    18 février 2011, par

    Multilang est un plugin supplémentaire qui n’est pas activé par défaut lors de l’initialisation de MediaSPIP.
    Après son activation, une préconfiguration est mise en place automatiquement par MediaSPIP init permettant à la nouvelle fonctionnalité d’être automatiquement opérationnelle. Il n’est donc pas obligatoire de passer par une étape de configuration pour cela.

  • HTML5 audio and video support

    13 avril 2011, par

    MediaSPIP uses HTML5 video and audio tags to play multimedia files, taking advantage of the latest W3C innovations supported by modern browsers.
    The MediaSPIP player used has been created specifically for MediaSPIP and can be easily adapted to fit in with a specific theme.
    For older browsers the Flowplayer flash fallback is used.
    MediaSPIP allows for media playback on major mobile platforms with the above (...)

Sur d’autres sites (9748)

  • Unable to choose an output [closed]

    17 février 2024, par Xdangin

    I try to change the time for subtitle and every time this pop up on my face

    


    


    Unable to choose an output format for 'output-subfamily' ; use a standard extension for the filename or specify the format manually

    


    


    srry guys cuz I don't get it but I'm new at this

    


    here's the full log im case I wrote something wrong

    


    /sdcard $ ffmpeg -itsoffset 2 -i Family.Guy.S04E23.srt -c:v copy output-sub family guy.srt

ffmpeg version 6.1.1 Copyright (c) 2000-2023 the FFmpeg developers

  built with Android (10552028, +pgo, +bolt, +lto, -mlgo, based on r487747d) clang version 17.0.2 (https://android.googlesource.com/toolchain/llvm-project d9f89f4d16663d5012e5c09495f3b30ece3d2362)

  configuration: --arch=aarch64 --as=aarch64-linux-android-clang --cc=aarch64-linux-android-clang --cxx=aarch64-linux-android-clang++ --nm=llvm-nm --pkg-config=/home/builder/.termux-build/_cache/android-r26b-api-24-v1/bin/pkg-config --strip=llvm-strip --cross-prefix=aarch64-linux-android- --disable-indevs --disable-outdevs --enable-indev=lavfi --disable-static --disable-symver --enable-cross-compile --enable-gnutls --enable-gpl --enable-version3 --enable-jni --enable-lcms2 --enable-libaom --enable-libass --enable-libbluray --enable-libdav1d --enable-libfreetype --enable-libgme --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenmpt --enable-libopus --enable-librav1e --enable-libsoxr --enable-libsrt --enable-libssh --enable-libsvtav1 --enable-libtheora --enable-libv4l2 --enable-libvidstab --enable-libvo-amrwbenc --enable-libvorbis --enable-libvpx --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzimg --enable-mediacodec --enable-opencl --enable-shared --prefix=/data/data/com.termux/files/usr --target-os=android --extra-libs=-landroid-glob --disable-vulkan --enable-neon --disable-libfdk-aac

  libavutil      58. 29.100 / 58. 29.100

  libavcodec     60. 31.102 / 60. 31.102

  libavformat    60. 16.100 / 60. 16.100

  libavdevice    60.  3.100 / 60.  3.100

  libavfilter     9. 12.100 /  9. 12.100

  libswscale      7.  5.100 /  7.  5.100

  libswresample   4. 12.100 /  4. 12.100

  libpostproc    57.  3.100 / 57.  3.100

Input #0, srt, from 'Family.Guy.S04E23.srt':

  Duration: N/A, bitrate: N/A

  Stream #0:0: Subtitle: subrip

[AVFormatContext @ 0x75b7eb2500] Unable to choose an output format for 'output-sub'; use a standard extension for the filename or specify the format manually.

[out#0 @ 0x75b7e3e840] Error initializing the muxer for output-sub: Invalid argument

Error opening output file output-sub.

Error opening output files: Invalid argument

/sdcard $ ffmpeg -itsoffset 2 -i Family.Guy.S04E23.srt -c copy output-sub family guy.srt


    


    I searched YouTube but didn't find anything

    


  • Intel QuickSync error : Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height

    30 novembre 2018, par Arie Syamsudin

    I want to make IPTV with a topology like this :

    Restream / source -----> IPTV server -----> User

    The problem at the moment is the question of bandwidth that is still large.

    Finally I announced by IPTV software providers to transcode with Intel QuickSync video and FFmpeg.

    I followed the steps given by the software provider at the following link :
    http://www.ezhometech.com/document/intel_ffmpeg.txt

    Which comes from the link below :
    https://www.intel.com/content/dam/www/public/us/en/documents/white-paper...

    I installed IPTV software on a laptop with an Intel processor, chipset and VGA.

    [root@iptv ffmpeg-4.1]# **lspci**
    
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
    
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
    
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
    
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
    
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
    
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
    
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5)
    
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
    
00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05)
    
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port Mobile SATA AHCI Controller (rev 05)
    
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
    
01:00.0 Ethernet controller: Qualcomm Atheros AR8152 v2.0 Fast Ethernet (rev c1)
    
02:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
    

    
[root@iptv ffmpeg-4.1]# **lspci -nn -s 0:02.0**
    
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09)

    but when I do a transcoding test, an error always appears :
    Error initializing output stream 0:0 — Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height.

    Error details :
    https://paste.fedoraproject.org/paste/vp9XIzbeOuyXRuLBlLfSng

    FFmpeg log :

    ./ffmpeg  -hwaccel qsv -i http://premium-play.org:8000/domm0H56Cj/q3ODLP6C16/2826 -vcodec h264_qsv -acodec copy -b:v 1200K -f mpegts udp://127.0.0.1:9011?pkt_size=1316
    
ffmpeg version 3.2.12 Copyright (c) 2000-2018 the FFmpeg developers
    
  built with gcc 4.8.5 (GCC) 20150623 (Red Hat 4.8.5-28)
    
  configuration: --enable-libmfx --enable-nonfree
    
  libavutil      55. 34.101 / 55. 34.101
    
  libavcodec     57. 64.101 / 57. 64.101
    
  libavformat    57. 56.101 / 57. 56.101
    
  libavdevice    57.  1.100 / 57.  1.100
    
  libavfilter     6. 65.100 /  6. 65.100
    
  libswscale      4.  2.100 /  4.  2.100
    
  libswresample   2.  3.100 /  2.  3.100
    
Input #0, mpegts, from 'http://premium-play.org:8000/domm0H56Cj/q3ODLP6C16/2826':
    
  Duration: N/A, start: 30200.274878, bitrate: N/A
    
  Program 1
    
    Metadata:
    
      service_name    : Service01
    
      service_provider: FFmpeg
    
    Stream #0:0[0x100]: Video: h264 (High) ([27][0][0][0] / 0x001B), yuv420p(progressive), 1920x1080 [SAR 1:1 DAR 16:9], 50 fps, 50 tbr, 90k tbn, 100 tbc
    
    Stream #0:1[0x101]: Audio: aac (LC) ([15][0][0][0] / 0x000F), 48000 Hz, stereo, fltp, 125 kb/s
    
libva info: VA-API version 1.0.0
    
libva info: va_getDriverName() returns 0
    
libva info: User requested driver 'iHD'
    
libva info: Trying to open /opt/intel/mediasdk/lib64/iHD_drv_video.so
    
libva info: Found init function __vaDriverInit_1_0
    
libva info: va_openDriver() returns 0
    
[h264_qsv @ 0x2a89500] Selected ratecontrol mode is not supported by the QSV runtime. Choose a different mode.
    
Stream mapping:
    
  Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_qsv))
    
  Stream #0:1 -> #0:1 (copy)
    
Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height

  • How to remove ffmpeg metadata "software lavf55.7.100"

    12 juillet 2013, par user2454777

    I'm using ffmpeg to extract audio from video files, then process the audio and cut it into smaller clip. But when i use ffmpeg to do the extraction, it adds a metadata "software lavf55.7.100" into my audio file, which screws my indexing of cutting. How can i get rid of this ?
    In attached picture, in the middle "Metadata : ISFT : Lavf55.7.100"
    The string that i'm using is : ffmpeg -i steve.mp4 -map_metadata -1 steve14.wav

    enter image description here

Navigation