Recherche avancée

Sur d’autres sites (7321)

• Statically built FFMPEG binary segmentation fault

  12 février 2020, par stevendesu

  I want to create a custom build of FFMPEG which rips out everything except for the ability to transmux HLS videos to MP4, and I need this build to be 100% static with no external dependencies

  I tried using the following configuration :

  ./configure \
  
      --extra-cflags='-static -static-libstdc++ -static-libgcc' \
  
      --extra-cxxflags='-static -static-libstdc++ -static-libgcc' \
  
      --extra-ldflags='-static -static-libstdc++ -static-libgcc' \
  
      --pkg-config-flags='--static' \
  
      --enable-static \
  
      --disable-shared \
  
      --disable-runtime-cpudetect \
  
      --disable-autodetect \
  
      --disable-ffplay \
  
      --disable-ffprobe \
  
      --disable-doc \
  
      --disable-avdevice \
  
      --disable-swresample \
  
      --disable-swscale \
  
      --disable-postproc \
  
      --disable-pthreads \
  
      --disable-w32threads \
  
      --disable-os2threads \
  
      --enable-network \
  
      --disable-dct \
  
      --disable-dwt \
  
      --disable-error-resilience \
  
      --disable-lsp \
  
      --disable-lzo \
  
      --disable-mdct \
  
      --disable-rdft \
  
      --disable-fft \
  
      --disable-faan \
  
      --disable-pixelutils \
  
      --disable-encoders \
  
      --disable-decoders \
  
      --disable-hwaccels \
  
      --disable-muxers \
  
      --enable-muxer=mov \
  
      --enable-muxer=mp4 \
  
      --disable-demuxers \
  
      --enable-demuxer=hls \
  
      --enable-demuxer=mpegts \
  
      --enable-demuxer=h264 \
  
      --enable-demuxer=aac \
  
      --disable-parsers \
  
      --enable-parser=h264 \
  
      --enable-parser=aac \
  
      --disable-bsfs \
  
      --disable-protocols \
  
      --enable-protocol=tcp \
  
      --enable-protocol=tls \
  
      --enable-protocol=http \
  
      --enable-protocol=https \
  
      --enable-protocol=hls \
  
      --disable-indevs \
  
      --disable-outdevs \
  
      --disable-devices \
  
      --disable-filters \
  
      --disable-alsa \
  
      --disable-appkit \
  
      --disable-avfoundation \
  
      --disable-bzlib \
  
      --disable-coreimage \
  
      --disable-iconv \
  
      --disable-lzma \
  
      --enable-openssl \
  
      --disable-sndio \
  
      --disable-sdl2 \
  
      --disable-securetransport \
  
      --disable-xlib \
  
      --disable-zlib \
  
      --disable-amf \
  
      --disable-audiotoolbox \
  
      --disable-cuda-llvm \
  
      --disable-cuvid \
  
      --disable-d3d11va \
  
      --disable-dxva2 \
  
      --disable-ffnvcodec \
  
      --disable-nvdec \
  
      --disable-nvenc \
  
      --disable-v4l2-m2m \
  
      --disable-vaapi \
  
      --disable-vdpau \
  
      --disable-videotoolbox \
  
      --disable-debug

  This looked about like what I wanted :

  install prefix            /usr/local
  
  source path               .
  
  C compiler                gcc
  
  C library                 glibc
  
  ARCH                      x86 (generic)
  
  big-endian                no
  
  runtime cpu detection     no
  
  standalone assembly       yes
  
  x86 assembler             nasm
  
  MMX enabled               yes
  
  MMXEXT enabled            yes
  
  3DNow! enabled            yes
  
  3DNow! extended enabled   yes
  
  SSE enabled               yes
  
  SSSE3 enabled             yes
  
  AESNI enabled             yes
  
  AVX enabled               yes
  
  AVX2 enabled              yes
  
  AVX-512 enabled           yes
  
  XOP enabled               yes
  
  FMA3 enabled              yes
  
  FMA4 enabled              yes
  
  i686 features enabled     yes
  
  CMOV is fast              yes
  
  EBX available             yes
  
  EBP available             yes
  
  debug symbols             no
  
  strip symbols             yes
  
  optimize for size         no
  
  optimizations             yes
  
  static                    yes
  
  shared                    no
  
  postprocessing support    no
  
  network support           yes
  
  threading support         no
  
  safe bitstream reader     yes
  
  texi2html enabled         no
  
  perl enabled              yes
  
  pod2man enabled           yes
  
  makeinfo enabled          no
  
  makeinfo supports HTML    no
  
  
  
  External libraries:
  
  openssl
  
  
  
  External libraries providing hardware acceleration:
  
  
  
  Libraries:
  
  avcodec                 avfilter                avformat                avutil
  
  
  
  Programs:
  
  ffmpeg
  
  
  
  Enabled decoders:
  
  
  
  Enabled encoders:
  
  
  
  Enabled hwaccels:
  
  
  
  Enabled parsers:
  
  aac                     h264
  
  
  
  Enabled demuxers:
  
  aac                     h264                    hls                     mpegts
  
  
  
  Enabled muxers:
  
  mov                     mp4
  
  
  
  Enabled protocols:
  
  hls                     http                    https                   tcp                     tls
  
  
  
  Enabled filters:
  
  aformat                 anull                   atrim                   format                  hflip                   null                    transpose               trim                    vflip
  
  
  
  Enabled bsfs:
  
  null
  
  
  
  Enabled indevs:
  
  
  
  Enabled outdevs:
  
  
  
  License: LGPL version 2.1 or later

  It included several filters which I won’t ever need or use, but these filters are pulled in automatically if you don’t specify --disable-avfilter, and specifying --disable-avfilter prevents the ffmpeg binary from being produced. So I’m stuck with those.

  Using these parameters and then running make, I received a binary that was about 5.9 MB in size and looked right :

  $> ldd ffmpeg
  
          not a dynamic executable

  But when I try to run it :

  $> ./ffmpeg -version
  
  Segmentation fault

  Using valgrind to try and inspect the cause of the segmentation fault :

  $> valgrind ./ffmpeg -version
  
  .... lots of stuff ...
  
  ==61362== Jump to the invalid address stated on the next line
  
  ==61362==    at 0x0: ???
  
  ==61362==    by 0x70BB1B: ??? (in /src/FFmpeg/ffmpeg)
  
  ==61362==    by 0x70B2E6: ??? (in /src/FFmpeg/ffmpeg)
  
  ==61362==    by 0x4033F9: ??? (in /src/FFmpeg/ffmpeg)
  
  ==61362==    by 0x1FFF000677: ???
  
  ==61362==  Address 0x0 is not stack'd, malloc'd or (recently) free'd
  
  ==61362==
  
  ==61362==
  
  ==61362== Process terminating with default action of signal 11 (SIGSEGV)
  
  ==61362==  Bad permissions for mapped region at address 0x0
  
  ==61362==    at 0x0: ???
  
  ==61362==    by 0x70BB1B: ??? (in /src/FFmpeg/ffmpeg)
  
  ==61362==    by 0x70B2E6: ??? (in /src/FFmpeg/ffmpeg)
  
  ==61362==    by 0x4033F9: ??? (in /src/FFmpeg/ffmpeg)
  
  ==61362==    by 0x1FFF000677: ???
  
  ==61362==
  
  ==61362== HEAP SUMMARY:
  
  ==61362==     in use at exit: 0 bytes in 0 blocks
  
  ==61362==   total heap usage: 0 allocs, 0 frees, 0 bytes allocated
  
  ==61362==
  
  ==61362== All heap blocks were freed -- no leaks are possible
  
  ==61362==
  
  ==61362== For counts of detected and suppressed errors, rerun with: -v
  
  ==61362== Use --track-origins=yes to see where uninitialised values come from
  
  ==61362== ERROR SUMMARY: 93 errors from 90 contexts (suppressed: 0 from 0)
  
  Segmentation fault

  Attempting to access memory at location 0x0 sounds like trying to follow a null pointer. But I’m not sure how to fix this.

  gdb backtrace

  When I first ran gdb ./ffmpeg gdb immediately gave me a segmentation fault and I wasn’t kicked into the gdb REPL, so I couldn’t investigate

  After rebuilding ffmpeg I was able to get in this time :

  $> gdb ./ffmpeg
  
  
  
  GNU gdb (Ubuntu 8.1-0ubuntu3.2) 8.1.0.20180409-git
  
  Copyright (C) 2018 Free Software Foundation, Inc.
  
  License GPLv3+: GNU GPL version 3 or later /gnu.org/licenses/gpl.html>
  
  This is free software: you are free to change and redistribute it.
  
  There is NO WARRANTY, to the extent permitted by law.  Type "show copying"
  
  and "show warranty" for details.
  
  This GDB was configured as "x86_64-linux-gnu".
  
  Type "show configuration" for configuration details.
  
  For bug reporting instructions, please see:
  
  /www.gnu.org/software/gdb/bugs/>.
  
  Find the GDB manual and other documentation resources online at:
  
  /www.gnu.org/software/gdb/documentation/>.
  
  For help, type "help".
  
  Type "apropos word" to search for commands related to "word"...
  
  Reading symbols from ffmpeg...done.
  
  (gdb) r
  
  Starting program: /src/FFmpeg/ffmpeg
  
  warning: Error disabling address space randomization: Operation not permitted
  
  
  
  Program received signal SIGSEGV, Segmentation fault.
  
  0x0000000000000000 in ?? ()
  
  (gdb) bt
  
  #0  0x0000000000000000 in ?? ()
  
  #1  0x0000000000f9a8d5 in __register_frame_info_bases.part.6 ()
  
  #2  0x00000000004445fd in frame_dummy ()
  
  #3  0x0000000000000001 in ?? ()
  
  #4  0x0000000000ebd20c in __libc_csu_init ()
  
  #5  0x0000000000ebc9d7 in __libc_start_main ()
  
  #6  0x000000000044451a in _start ()
  
  (gdb)

  I tried grep’ing the code base for __register_frame_info_bases and found nothing. So I’m not really sure where to go from here

  A fix, but not an explanation

  By randomly removing configuration parameters and rebuilding I discovered that --disable-pthreads was causing the segmentation fault. When I remove this, ffmpeg runs just fine

  I don’t know why this is the case, though. Why would they make it possible to remove something that you need to run ?

• Python - why do I get this ffprobe error ?

  4 juillet 2022, par gasper101

  I am on mac and am working on a project in which my program shoud convert a .mp3 file into a .wav file and than get text from that file (basic speech recognition). For converting a .mp3 file into a .wav file I am using ffmpeg library. I have installed both ffmpeg and ffprobe libraryies using pip and than using homebrew so I have them installed in a folder.

  


  This is my code :

  


  import speech_recognition
from pydub import AudioSegment
from os import path


#get text from original voice file------------------------------------------------- 

sound = AudioSegment.from_mp3("/path/to/file.mp3")
sound.export("/output/path/file.wav", format="wav")

file_audio = speech_recognition.AudioFile('/output/path/file.wav')

r = speech_recognition.Recognizer()
with file_audio as source:
    audio_text = r.record(source)

word = r.recognize_google(audio_text)


  


  And this is the error i get :
FileNotFoundError : [Errno 2] No such file or directory : 'ffprobe'

  


  Full error :
Warning (from warnings module) :
File "/Library/Frameworks/Python.framework/Versions/3.9/lib/python3.9/site-packages/pydub/utils.py", line 170
warn("Couldn't find ffmpeg or avconv - defaulting to ffmpeg, but may not work", RuntimeWarning)
RuntimeWarning : Couldn't find ffmpeg or avconv - defaulting to ffmpeg, but may not work

  


  Warning (from warnings module) :
File "/Library/Frameworks/Python.framework/Versions/3.9/lib/python3.9/site-packages/pydub/utils.py", line 198
warn("Couldn't find ffprobe or avprobe - defaulting to ffprobe, but may not work", RuntimeWarning)

  


  RuntimeWarning : Couldn't find ffprobe or avprobe - defaulting to ffprobe, but may not work
Traceback (most recent call last) :
File "/Users/marcus/Downloads/pronaunciation_checker/pronaunciation_check.py", line 12, in 
sound = AudioSegment.from_mp3("/Users/marcus/Desktop/think.mp3")
File "/Library/Frameworks/Python.framework/Versions/3.9/lib/python3.9/site-packages/pydub/audio_segment.py", line 796, in from_mp3
return cls.from_file(file, 'mp3', parameters=parameters)
File "/Library/Frameworks/Python.framework/Versions/3.9/lib/python3.9/site-packages/pydub/audio_segment.py", line 728, in from_file
info = mediainfo_json(orig_file, read_ahead_limit=read_ahead_limit)
File "/Library/Frameworks/Python.framework/Versions/3.9/lib/python3.9/site-packages/pydub/utils.py", line 274, in mediainfo_json
res = Popen(command, stdin=stdin_parameter, stdout=PIPE, stderr=PIPE)
File "/Library/Frameworks/Python.framework/Versions/3.9/lib/python3.9/subprocess.py", line 951, in init
self._execute_child(args, executable, preexec_fn, close_fds,
File "/Library/Frameworks/Python.framework/Versions/3.9/lib/python3.9/subprocess.py", line 1821, in _execute_child
raise child_exception_type(errno_num, err_msg, err_filename)
FileNotFoundError : [Errno 2] No such file or directory : 'ffprobe'

  


• ytdl python "KeyError : formats"

  7 juillet 2022, par Mondumkreisung

  Im trying to make a discord music bot for personal use, since groovy and rythm got shut down.
It's working okay-ish I guess, but im having a problem with ytdl.
typing "-play" and an url is working just like intended, but i cant type "-play 'song name'".
Typing "-play example" gives me this :

  


  [download] Downloading playlist: example
[youtube:search] query "example": Downloading page 1
[youtube:search] playlist example: Downloading 1 videos
[download] Downloading video 1 of 1
[youtube] CLXt3yh2g0s: Downloading webpage
Ignoring exception in command play:
[download] Finished downloading playlist: example
Traceback (most recent call last):
  File "C:\Users\Dennis\PycharmProjects\groovy's true successor\venv\lib\site-packages\discord\ext\commands\core.py", line 85, in wrapped
    ret = await coro(*args, **kwargs)
  File "C:\Users\Dennis\PycharmProjects\groovy's true successor\voice.py", line 53, in play
    url2 = info['formats'][0]['url']
KeyError: 'formats'

The above exception was the direct cause of the following exception:

Traceback (most recent call last):
  File "C:\Users\Dennis\PycharmProjects\groovy's true successor\venv\lib\site-packages\discord\ext\commands\bot.py", line 939, in invoke
    await ctx.command.invoke(ctx)
  File "C:\Users\Dennis\PycharmProjects\groovy's true successor\venv\lib\site-packages\discord\ext\commands\core.py", line 863, in invoke
    await injected(*ctx.args, **ctx.kwargs)
  File "C:\Users\Dennis\PycharmProjects\groovy's true successor\venv\lib\site-packages\discord\ext\commands\core.py", line 94, in wrapped
    raise CommandInvokeError(exc) from exc
discord.ext.commands.errors.CommandInvokeError: Command raised an exception: KeyError: 'formats'


  


  im fairly new to coding, so im sorry if somethings weird to understand.

  


  okay, so : typing -play with an url works fine, but typing -play with the song name doesnt. its only searching for the first word, downloads the first searchresult and then "crashes".

  


  so "-play Rick Astley - Never Gonna Give You Up" for example only searches for "Rick" and then it says something about KeyError : 'formats'
Here is my code :

  


  @client.command()
async def play(ctx, url):
    channel = ctx.author.voice.channel
    voice = discord.utils.get(client.voice_clients, guild=ctx.guild)
    if voice and voice.is_connected():
        pass
    else:
        await channel.connect()

    ffmpeg_opts = {'before_options': '-reconnect 1 -reconnect_streamed 1 -reconnect_delay_max 5', 'options': '-vn'}
    ydl_opts = {'format': "bestaudio/best", 'default_search': 'auto'}
    vc = ctx.voice_client

    with youtube_dl.YoutubeDL(ydl_opts) as ydl:
        info = ydl.extract_info(url, download=False)
        url2 = info['formats'][0]['url']
        source = await discord.FFmpegOpusAudio.from_probe(url2, **ffmpeg_opts)
        vc.play(source)