Recherche avancée
Médias (3)
-
Exemple de boutons d’action pour une collection collaborative
27 février 2013, par
Mis à jour : Mars 2013
Langue : français
Type : Image
-
Exemple de boutons d’action pour une collection personnelle
27 février 2013, par
Mis à jour : Février 2013
Langue : English
Type : Image
-
Collections - Formulaire de création rapide
19 février 2013, par
Mis à jour : Février 2013
Langue : français
Type : Image
Autres articles (54)
-
Participer à sa traduction
10 avril 2011Vous pouvez nous aider à améliorer les locutions utilisées dans le logiciel ou à traduire celui-ci dans n’importe qu’elle nouvelle langue permettant sa diffusion à de nouvelles communautés linguistiques.
Pour ce faire, on utilise l’interface de traduction de SPIP où l’ensemble des modules de langue de MediaSPIP sont à disposition. ll vous suffit de vous inscrire sur la liste de discussion des traducteurs pour demander plus d’informations.
Actuellement MediaSPIP n’est disponible qu’en français et (...) -
Les formats acceptés
28 janvier 2010, parLes commandes suivantes permettent d’avoir des informations sur les formats et codecs gérés par l’installation local de ffmpeg :
ffmpeg -codecs ffmpeg -formats
Les format videos acceptés en entrée
Cette liste est non exhaustive, elle met en exergue les principaux formats utilisés : h264 : H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10 m4v : raw MPEG-4 video format flv : Flash Video (FLV) / Sorenson Spark / Sorenson H.263 Theora wmv :
Les formats vidéos de sortie possibles
Dans un premier temps on (...) -
Ajouter notes et légendes aux images
7 février 2011, parPour pouvoir ajouter notes et légendes aux images, la première étape est d’installer le plugin "Légendes".
Une fois le plugin activé, vous pouvez le configurer dans l’espace de configuration afin de modifier les droits de création / modification et de suppression des notes. Par défaut seuls les administrateurs du site peuvent ajouter des notes aux images.
Modification lors de l’ajout d’un média
Lors de l’ajout d’un média de type "image" un nouveau bouton apparait au dessus de la prévisualisation (...)
Sur d’autres sites (3916)
-
Video Encoding/Decoding - FFmpeg/Libav
10 janvier 2014, par learnerI am trying to learn video encoding/decoding using FFmpeg/Libav libraries. The code I follow is : http://www.ffmpeg.org/doxygen/0.6/api-example_8c-source.html
I am working with only Video Encoding and Video Decoding part of the code. The code encodes dummy images and decodes a dummy video. I am not able to figure out why it doesn't access the video file I provide it (myFile.mpg) in main() function.
video_encode_example("myFile.mpg");
filename = "myFile.mpg";How do I make it access my video file ?? It generates random images and video even when I give any random name in the above piece of code ("asdf.mpg" or "aaaa.mpg", etc.).
Here is the selected part I work with :
#include
#include
#include
#ifdef HAVE_AV_CONFIG_H
#undef HAVE_AV_CONFIG_H
#endif
#include "libavcodec/avcodec.h"
#include "libavutil/mathematics.h"
#define INBUF_SIZE 4096
#define AUDIO_INBUF_SIZE 20480
#define AUDIO_REFILL_THRESH 4096
/*
* Video encoding example
*/
static void video_encode_example(const char *filename)
{
AVCodec *codec;
AVCodecContext *c = NULL;
int i, out_size, size, x, y, outbuf_size;
FILE *f;
AVFrame *picture;
uint8_t *outbuf, *picture_buf;
printf("Video encoding\n");
/* find the mpeg1 video encoder */
codec = avcodec_find_encoder(CODEC_ID_MPEG1VIDEO);
if (!codec)
{
fprintf(stderr, "codec not found\n");
exit(1);
}
c = avcodec_alloc_context();
picture = avcodec_alloc_frame();
/* put sample parameters */
c->bit_rate = 400000;
/* resolution must be a multiple of two */
c->width = 352;
c->height = 288;
/* frames per second */
c->time_base= (AVRational){1,25};
c->gop_size = 10; /* emit one intra frame every ten frames */
c->max_b_frames=1;
c->pix_fmt = PIX_FMT_YUV420P;
/* open it */
if (avcodec_open(c, codec) < 0)
{
fprintf(stderr, "could not open codec\n");
exit(1);
}
f = fopen(filename, "wb");
if (!f)
{
fprintf(stderr, "could not open file! %s\n", filename);
exit(1);
}
/* alloc image and output buffer */
outbuf_size = 100000;
outbuf = malloc(outbuf_size);
size = c->width * c->height;
picture_buf = malloc((size * 3) / 2); /* size for YUV 420 */
picture->data[0] = picture_buf;
picture->data[1] = picture->data[0] + size;
picture->data[2] = picture->data[1] + size / 4;
picture->linesize[0] = c->width;
picture->linesize[1] = c->width / 2;
picture->linesize[2] = c->width / 2;
/* encode 1 second of video */
for(i=0; i<25; i++)
{
fflush(stdout);
/* prepare a dummy image */
/* Y */
for(y=0; y < c->height; y++)
{
for(x=0; x < c->width; x++)
{
picture->data[0][y * picture->linesize[0] + x] = x + y + i * 3;
}
}
/* Cb and Cr */
for(y=0; y < c->height/2; y++)
{
for(x=0; x < c->width/2; x++)
{
picture->data[1][y * picture->linesize[1] + x] = 128 + y + i * 2;
picture->data[2][y * picture->linesize[2] + x] = 64 + x + i * 5;
}
}
/* encode the image */
out_size = avcodec_encode_video(c, outbuf, outbuf_size, picture);
printf("encoding frame %3d (size=%5d)\n", i, out_size);
fwrite(outbuf, 1, out_size, f);
}
/* get the delayed frames */
for(; out_size; i++)
{
fflush(stdout);
out_size = avcodec_encode_video(c, outbuf, outbuf_size, NULL);
printf("write frame %3d (size=%5d)\n", i, out_size);
fwrite(outbuf, 1, out_size, f);
}
/* add sequence end code to have a real mpeg file */
outbuf[0] = 0x00;
outbuf[1] = 0x00;
outbuf[2] = 0x01;
outbuf[3] = 0xb7;
fwrite(outbuf, 1, 4, f);
fclose(f);
free(picture_buf);
free(outbuf);
avcodec_close(c);
av_free(c);
av_free(picture);
printf("\n");
}
/*
* Video decoding example
*/
static void pgm_save(unsigned char *buf, int wrap, int xsize, int ysize,
char *filename)
{
FILE *f;
int i;
f=fopen(filename,"w");
fprintf(f,"P5\n%d %d\n%d\n",xsize,ysize,255);
for(i=0; i* set end of buffer to 0 (this ensures that no overreading happens for damaged mpeg streams) */
memset(inbuf + INBUF_SIZE, 0, FF_INPUT_BUFFER_PADDING_SIZE);
printf("Video decoding\n");
/* find the mpeg1 video decoder */
codec = avcodec_find_decoder(CODEC_ID_MPEG1VIDEO);
if (!codec) {
fprintf(stderr, "codec not found\n");
exit(1);
}
c = avcodec_alloc_context();
picture = avcodec_alloc_frame();
if(codec->capabilities&CODEC_CAP_TRUNCATED)
c->flags|= CODEC_FLAG_TRUNCATED; /* we do not send complete frames */
/* For some codecs, such as msmpeg4 and mpeg4, width and height
MUST be initialized there because this information is not
available in the bitstream. */
/* open it */
if (avcodec_open(c, codec) < 0) {
fprintf(stderr, "could not open codec\n");
exit(1);
}
/* the codec gives us the frame size, in samples */
f = fopen(filename, "rb");
if (!f) {
fprintf(stderr, "could not open file! %s\n", filename);
exit(1);
}
frame = 0;
for(;;) {
avpkt.size = fread(inbuf, 1, INBUF_SIZE, f);
if (avpkt.size == 0)
break;
/* NOTE1: some codecs are stream based (mpegvideo, mpegaudio)
and this is the only method to use them because you cannot
know the compressed data size before analysing it.
BUT some other codecs (msmpeg4, mpeg4) are inherently frame
based, so you must call them with all the data for one
frame exactly. You must also initialize 'width' and
'height' before initializing them. */
/* NOTE2: some codecs allow the raw parameters (frame size,
sample rate) to be changed at any frame. We handle this, so
you should also take care of it */
/* here, we use a stream based decoder (mpeg1video), so we
feed decoder and see if it could decode a frame */
avpkt.data = inbuf;
while (avpkt.size > 0)
{
len = avcodec_decode_video2(c, picture, &got_picture, &avpkt);
if (len < 0)
{
fprintf(stderr, "Error while decoding frame %d\n", frame);
exit(1);
}
if (got_picture)
{
printf("saving frame %3d\n", frame);
fflush(stdout);
/* the picture is allocated by the decoder. no need to
free it */
snprintf(buf, sizeof(buf), outfilename, frame);
pgm_save(picture->data[0], picture->linesize[0],
c->width, c->height, buf);
frame++;
}
avpkt.size -= len;
avpkt.data += len;
}
}
/* some codecs, such as MPEG, transmit the I and P frame with a
latency of one frame. You must do the following to have a
chance to get the last frame of the video */
avpkt.data = NULL;
avpkt.size = 0;
len = avcodec_decode_video2(c, picture, &got_picture, &avpkt);
if (got_picture)
{
printf("saving last frame %3d\n", frame);
fflush(stdout);
/* the picture is allocated by the decoder. no need to
free it */
snprintf(buf, sizeof(buf), outfilename, frame);
pgm_save(picture->data[0], picture->linesize[0],
c->width, c->height, buf);
frame++;
}
fclose(f);
avcodec_close(c);
av_free(c);
av_free(picture);
printf("\n");
}
int main(int argc, char **argv)
{
const char *filename;
/* must be called before using avcodec lib */
avcodec_init();
/* register all the codecs */
avcodec_register_all();
if (argc <= 1)
{
video_encode_example("asdf.mpg");
filename = "asdf.mpg";
}
else
{
filename = argv[1];
}
video_decode_example("%d.pgm", filename);
return 0;
} -
FFmpeg sample code for creating a video file from still images JNI Android
21 juin 2012, par anishHow i modify the following FFMPEG sample code for creating a video file from still images that i am having in my android phone. I am using JNI for invoking ffmpeg.
JNIEXPORT void JNICALL videoEncodeExample((JNIEnv *pEnv, jobject pObj, jstring filename)
{
AVCodec *codec;
AVCodecContext *c= NULL;
int i, out_size, size, x, y, outbuf_size;
FILE *f;
AVFrame *picture;
uint8_t *outbuf, *picture_buf;
printf("Video encoding\n");
/* find the mpeg1 video encoder */
codec = avcodec_find_encoder(CODEC_ID_MPEG1VIDEO);
if (!codec) {
fprintf(stderr, "codec not found\n");
exit(1);
}
c= avcodec_alloc_context();
picture= avcodec_alloc_frame();
/* put sample parameters */
c->bit_rate = 400000;
/* resolution must be a multiple of two */
c->width = 352;
c->height = 288;
/* frames per second */
c->time_base= (AVRational){1,25};
c->gop_size = 10; /* emit one intra frame every ten frames */
c->max_b_frames=1;
c->pix_fmt = PIX_FMT_YUV420P;
/* open it */
if (avcodec_open(c, codec) < 0) {
fprintf(stderr, "could not open codec\n");
exit(1);
}
f = fopen(filename, "wb");
if (!f) {
fprintf(stderr, "could not open %s\n", filename);
exit(1);
}
/* alloc image and output buffer */
outbuf_size = 100000;
outbuf = malloc(outbuf_size);
size = c->width * c->height;
picture_buf = malloc((size * 3) / 2); /* size for YUV 420 */
picture->data[0] = picture_buf;
picture->data[1] = picture->data[0] + size;
picture->data[2] = picture->data[1] + size / 4;
picture->linesize[0] = c->width;
picture->linesize[1] = c->width / 2;
picture->linesize[2] = c->width / 2;
/* encode 1 second of video */
for(i=0;i<25;i++) {
fflush(stdout);
/* prepare a dummy image */
/* Y */
for(y=0;yheight;y++) {
for(x=0;xwidth;x++) {
picture->data[0][y * picture->linesize[0] + x] = x + y + i * 3;
}
}
/* Cb and Cr */
for(y=0;yheight/2;y++) {
for(x=0;xwidth/2;x++) {
picture->data[1][y * picture->linesize[1] + x] = 128 + y + i * 2;
picture->data[2][y * picture->linesize[2] + x] = 64 + x + i * 5;
}
}
/* encode the image */
out_size = avcodec_encode_video(c, outbuf, outbuf_size, picture);
printf("encoding frame %3d (size=%5d)\n", i, out_size);
fwrite(outbuf, 1, out_size, f);
}
/* get the delayed frames */
for(; out_size; i++) {
fflush(stdout);
out_size = avcodec_encode_video(c, outbuf, outbuf_size, NULL);
printf("write frame %3d (size=%5d)\n", i, out_size);
fwrite(outbuf, 1, out_size, f);
}
/* add sequence end code to have a real mpeg file */
outbuf[0] = 0x00;
outbuf[1] = 0x00;
outbuf[2] = 0x01;
outbuf[3] = 0xb7;
fwrite(outbuf, 1, 4, f);
fclose(f);
free(picture_buf);
free(outbuf);
avcodec_close(c);
av_free(c);
av_free(picture);
printf("\n");
}Thanks and Regards
Anish -
ffmpeg +libx264 iPhone -> 'avcodec_encode_video' return always 0 . please advice
2 janvier 2014, par isaiahav_register_all();AVCodec *codec ; AVCodecContext *c= NULL ; int out_size, size, outbuf_size ; //FILE *f ; uint8_t *outbuf ;printf("Video encoding\n") ;
/* find the mpeg video encoder */
codec =avcodec_find_encoder(CODEC_ID_H264) ;//avcodec_find_encoder_by_name("libx264") ; //avcodec_find_encoder(CODEC_ID_H264) ;//CODEC_ID_H264) ;
NSLog(@"codec = %i",codec) ;
if (!codec)
fprintf(stderr, "codec not found\n") ;
exit(1) ;
c= avcodec_alloc_context() ;/* put sample parameters */
c->bit_rate = 400000 ;
c->bit_rate_tolerance = 10 ;
c->me_method = 2 ;
/* resolution must be a multiple of two */
c->width = 352 ;//width ;//352 ;
c->height = 288 ;//height ;//288 ;
/* frames per second */
c->time_base= (AVRational)1,25 ;
c->gop_size = 10 ; /* emit one intra frame every ten frames */
//c->max_b_frames=1 ;
c->pix_fmt = PIX_FMT_YUV420P ;c ->me_range = 16 ;
c ->max_qdiff = 4 ;
c ->qmin = 10 ;
c ->qmax = 51 ;
c ->qcompress = 0.6f ;'avcodec_encode_video' is always 0 .
I guess that because 'non-strictly-monotonic PTS' warning, do you konw same situation ?
Syndiquer tout le site
