
Recherche avancée
Autres articles (89)
-
Récupération d’informations sur le site maître à l’installation d’une instance
26 novembre 2010, parUtilité
Sur le site principal, une instance de mutualisation est définie par plusieurs choses : Les données dans la table spip_mutus ; Son logo ; Son auteur principal (id_admin dans la table spip_mutus correspondant à un id_auteur de la table spip_auteurs)qui sera le seul à pouvoir créer définitivement l’instance de mutualisation ;
Il peut donc être tout à fait judicieux de vouloir récupérer certaines de ces informations afin de compléter l’installation d’une instance pour, par exemple : récupérer le (...) -
Websites made with MediaSPIP
2 mai 2011, parThis page lists some websites based on MediaSPIP.
-
Possibilité de déploiement en ferme
12 avril 2011, parMediaSPIP peut être installé comme une ferme, avec un seul "noyau" hébergé sur un serveur dédié et utilisé par une multitude de sites différents.
Cela permet, par exemple : de pouvoir partager les frais de mise en œuvre entre plusieurs projets / individus ; de pouvoir déployer rapidement une multitude de sites uniques ; d’éviter d’avoir à mettre l’ensemble des créations dans un fourre-tout numérique comme c’est le cas pour les grandes plate-formes tout public disséminées sur le (...)
Sur d’autres sites (6271)
-
ffmpeg stops randomly with "No more output streams to write to, finishing" when reading rtsp stream [on hold]
7 juin 2016, par ImagineDragonBasically I am running the following ffmpeg command to read an h264 rtsp stream using hls muxer, under Ubuntu 14.04 64bit with i7 CPU and 8GB memory :
ffmpeg -v debug -i rtsp://172.16.11.247:554/live/ch00_0?token=hQttXvrjSPOcClQB -codec copy -flags -global_header -f hls -hls_time 5 -use_localtime 1 -hls_segment_filename '/home/eason/ffmpeg-test/%s.ts' '/home/eason/ffmpeg-test/live.m3u8'
ffmpeg version N-79139-gde1a0d4 Copyright (c) 2000-2016 the FFmpeg developers
built with gcc 4.8 (Ubuntu 4.8.4-2ubuntu1~14.04.1)
configuration: --extra-libs=-ldl --prefix=/opt/ffmpeg --mandir=/usr/share/man --enable-avresample --disable-debug --enable-nonfree --enable-gpl --enable-version3 --enable-libopencore-amrnb --enable-libopencore-amrwb --disable-decoder=amrnb --disable-decoder=amrwb --enable-libpulse --enable-libfreetype --enable-gnutls --enable-libx264 --enable-libx265 --enable-libfdk-aac --enable-libvorbis --enable-libmp3lame --enable-libopus --enable-libvpx --enable-libspeex --enable-libass --enable-avisynth --enable-libsoxr --enable-libxvid --enable-libvidstab
libavutil 55. 19.100 / 55. 19.100
libavcodec 57. 30.100 / 57. 30.100
libavformat 57. 29.101 / 57. 29.101
libavdevice 57. 0.101 / 57. 0.101
libavfilter 6. 40.102 / 6. 40.102
libavresample 3. 0. 0 / 3. 0. 0
libswscale 4. 0.100 / 4. 0.100
libswresample 2. 0.101 / 2. 0.101
libpostproc 54. 0.100 / 54. 0.100
Splitting the commandline.
Reading option '-v' ... matched as option 'v' (set logging level) with argument 'debug'.
Reading option '-re' ... matched as option 're' (read input at native frame rate) with argument '1'.
Reading option '-i' ... matched as input file with argument 'rtsp://172.16.11.247:554/live/ch00_0?token=hQttXvrjSPOcClQB'.
Reading option '-codec' ... matched as option 'codec' (codec name) with argument 'copy'.
Reading option '-flags' ... matched as AVOption 'flags' with argument '-global_header'.
Reading option '-f' ... matched as option 'f' (force format) with argument 'hls'.
Reading option '-hls_time' ... matched as AVOption 'hls_time' with argument '5'.
Reading option '-use_localtime' ... matched as AVOption 'use_localtime' with argument '1'.
Reading option '-hls_segment_filename' ... matched as AVOption 'hls_segment_filename' with argument '/home/eason/ffmpeg-test/%s.ts'.
Reading option '/home/eason/ffmpeg-test/live.m3u8' ... matched as output file.
Finished splitting the commandline.
Parsing a group of options: global .
Applying option v (set logging level) with argument debug.
Successfully parsed a group of options.
Parsing a group of options: input file rtsp://172.16.11.247:554/live/ch00_0?token=hQttXvrjSPOcClQB.
Applying option re (read input at native frame rate) with argument 1.
Successfully parsed a group of options.
Opening an input file: rtsp://172.16.11.247:554/live/ch00_0?token=hQttXvrjSPOcClQB.
[tcp @ 0x29c4d60] No default whitelist set
[rtsp @ 0x29c2e20] SDP:
m=video 0 RTP/AVP 96
a=rtpmap:96 H264/90000
a=fmtp:96 packetization-mode=1;profile-level-id=640028;sprop-parameter-sets=Z2QAKKzoBQBbkA==,aO48sA==
a=control:trackID=0
m=audio 0 RTP/AVP 98
a=rtpmap:98 MPEG4-GENERIC/16000/1
a=fmtp:98 profile-level-id=1;mode=AAC-lbr;sizelength=13;indexlength=3;indexdeltalength=3;config=1408;cpresent=0;
a=control:trackID=1
[rtsp @ 0x29c2e20] video codec set to: h264
[rtsp @ 0x29c2e20] RTP Packetization Mode: 1
[rtsp @ 0x29c2e20] RTP Profile IDC: 64 Profile IOP: 0 Level: 28
[rtsp @ 0x29c2e20] Extradata set to 0x29c4ff0 (size: 22)
[rtsp @ 0x29c2e20] audio codec set to: aac
[rtsp @ 0x29c2e20] audio samplerate set to: 16000
[rtsp @ 0x29c2e20] audio channels set to: 1
[rtp @ 0x29c50a0] No default whitelist set
[udp @ 0x29c5200] No default whitelist set
[udp @ 0x29c5200] end receive buffer size reported is 131072
[udp @ 0x29d9480] No default whitelist set
[udp @ 0x29d9480] end receive buffer size reported is 131072
[rtsp @ 0x29c2e20] method SETUP failed: 461 Unsupported transport
[rtsp @ 0x29c2e20] CSeq: 3
[rtsp @ 0x29c2e20] setting jitter buffer size to 0
Last message repeated 1 times
[rtsp @ 0x29c2e20] hello state=0
[rtsp @ 0x29c2e20] All info found
[rtsp @ 0x29c2e20] rfps: 24.250000 0.018062
[rtsp @ 0x29c2e20] rfps: 24.333333 0.012911
[rtsp @ 0x29c2e20] rfps: 24.416667 0.008627
[rtsp @ 0x29c2e20] rfps: 24.500000 0.005207
Last message repeated 1 times
[rtsp @ 0x29c2e20] rfps: 24.583333 0.002653
Last message repeated 1 times
[rtsp @ 0x29c2e20] rfps: 24.666667 0.000965
Last message repeated 1 times
[rtsp @ 0x29c2e20] rfps: 24.750000 0.000142
Last message repeated 1 times
[rtsp @ 0x29c2e20] rfps: 24.833333 0.000185
Last message repeated 1 times
[rtsp @ 0x29c2e20] rfps: 24.916667 0.001093
Last message repeated 1 times
[rtsp @ 0x29c2e20] rfps: 25.000000 0.002867
Last message repeated 1 times
[rtsp @ 0x29c2e20] rfps: 25.083333 0.005507
Last message repeated 1 times
[rtsp @ 0x29c2e20] rfps: 25.166667 0.009011
[rtsp @ 0x29c2e20] rfps: 25.250000 0.013382
[rtsp @ 0x29c2e20] rfps: 25.333333 0.018618
[rtsp @ 0x29c2e20] rfps: 50.000000 0.011469
Input #0, rtsp, from 'rtsp://172.16.11.247:554/live/ch00_0?token=hQttXvrjSPOcClQB':
Duration: N/A, start: 0.000000, bitrate: N/A
Stream #0:0, 28, 1/90000: Video: h264 (High), 1 reference frame, yuv420p(left), 1280x720, 1/180000, 24.75 tbr, 90k tbn, 180k tbc
Stream #0:1, 23, 1/16000: Audio: aac (LC), 16000 Hz, mono, fltp
Successfully opened the file.
Parsing a group of options: output file /home/eason/ffmpeg-test/live.m3u8.
Applying option codec (codec name) with argument copy.
Applying option f (force format) with argument hls.
Successfully parsed a group of options.
Opening an output file: /home/eason/ffmpeg-test/live.m3u8.
Successfully opened the file.
[file @ 0x2cae180] Setting default whitelist 'file,crypto'
[mpegts @ 0x29f7ce0] muxrate VBR, pcr every 9000 pkts, sdt every 2147483647, pat/pmt every 2147483647 pkts
Output #0, hls, to '/home/eason/ffmpeg-test/live.m3u8':
Metadata:
encoder : Lavf57.29.101
Stream #0:0, 0, 1/90000: Video: h264, 1 reference frame, yuv420p(left), 1280x720 (0x0), 1/90000, q=2-31, 24.75 tbr, 90k tbn, 90k tbc
Stream #0:1, 0, 1/90000: Audio: aac (LC), 16000 Hz, mono
Stream mapping:
Stream #0:0 -> #0:0 (copy)
Stream #0:1 -> #0:1 (copy)
Press [q] to stop, [?] for help
cur_dts is invalid (this is harmless if it occurs once at the start per stream)
Last message repeated 103 times
[hls @ 0x2a0fc00] Timestamps are unset in a packet for stream 0. This is deprecated and will stop working in the future. Fix your code to set the timestamps properly
[AVIOContext @ 0x2c998c0] Statistics: 0 seeks, 155 writeouts=N/A speed=1.01x
[file @ 0x2ba60e0] Setting default whitelist 'file,crypto'
[file @ 0x2ca9fc0] Setting default whitelist 'file,crypto'
[hls @ 0x2a0fc00] EXT-X-MEDIA-SEQUENCE:0
[AVIOContext @ 0x2caa080] Statistics: 0 seeks, 1 writeouts
[AVIOContext @ 0x2c99480] Statistics: 0 seeks, 103 writeouts=N/A speed= 1x
[file @ 0x2ba60e0] Setting default whitelist 'file,crypto'
[file @ 0x2c97c60] Setting default whitelist 'file,crypto'
[hls @ 0x2a0fc00] EXT-X-MEDIA-SEQUENCE:0
[AVIOContext @ 0x2c97d20] Statistics: 0 seeks, 1 writeouts
[AVIOContext @ 0x2c99480] Statistics: 0 seeks, 104 writeouts=N/A speed= 1x
[file @ 0x2ba60e0] Setting default whitelist 'file,crypto'
[file @ 0x2c99680] Setting default whitelist 'file,crypto'
[hls @ 0x2a0fc00] EXT-X-MEDIA-SEQUENCE:0
[AVIOContext @ 0x2c99820] Statistics: 0 seeks, 1 writeouts
[AVIOContext @ 0x2c99480] Statistics: 0 seeks, 28 writeoutse=N/A speed= 1x
[file @ 0x29c50c0] Setting default whitelist 'file,crypto'
[file @ 0x2ba60e0] Setting default whitelist 'file,crypto'
[hls @ 0x2a0fc00] EXT-X-MEDIA-SEQUENCE:0
[AVIOContext @ 0x29c2ce0] Statistics: 0 seeks, 1 writeouts
[AVIOContext @ 0x2c99480] Statistics: 0 seeks, 111 writeouts=N/A speed= 1x
[file @ 0x2c97d40] Setting default whitelist 'file,crypto'
[file @ 0x2a134e0] Setting default whitelist 'file,crypto'
[hls @ 0x2a0fc00] EXT-X-MEDIA-SEQUENCE:0
[AVIOContext @ 0x2a11000] Statistics: 0 seeks, 1 writeouts
[AVIOContext @ 0x2c99480] Statistics: 0 seeks, 105 writeouts=N/A speed= 1x
[file @ 0x29c50c0] Setting default whitelist 'file,crypto'
[file @ 0x2a10c00] Setting default whitelist 'file,crypto'
[hls @ 0x2a0fc00] EXT-X-MEDIA-SEQUENCE:1
[AVIOContext @ 0x2a10cc0] Statistics: 0 seeks, 1 writeouts
[AVIOContext @ 0x2c99480] Statistics: 0 seeks, 103 writeouts=N/A speed= 1x
[file @ 0x29c50c0] Setting default whitelist 'file,crypto'
[file @ 0x2c99480] Setting default whitelist 'file,crypto'
.......repeat........
[hls @ 0x2a0fc00] EXT-X-MEDIA-SEQUENCE:71
[AVIOContext @ 0x2c97fa0] Statistics: 0 seeks, 1 writeouts
[rtsp @ 0x29c2e20] Too short data for FU-A H264 RTP packette=N/A speed= 1x
[AVIOContext @ 0x2ba60e0] Statistics: 0 seeks, 103 writeouts=N/A speed= 1x
[file @ 0x2c97b20] Setting default whitelist 'file,crypto'
[file @ 0x2c97c60] Setting default whitelist 'file,crypto'
[hls @ 0x2a0fc00] EXT-X-MEDIA-SEQUENCE:72
[AVIOContext @ 0x2c99480] Statistics: 0 seeks, 1 writeouts
[AVIOContext @ 0x2ba60e0] Statistics: 0 seeks, 156 writeouts=N/A speed= 1x
[file @ 0x2c99480] Setting default whitelist 'file,crypto'
[file @ 0x2cab600] Setting default whitelist 'file,crypto'
[hls @ 0x2a0fc00] EXT-X-MEDIA-SEQUENCE:73
[AVIOContext @ 0x2cab6c0] Statistics: 0 seeks, 1 writeouts
[AVIOContext @ 0x2ba60e0] Statistics: 0 seeks, 104 writeouts=N/A speed= 1x
[file @ 0x2cadc00] Setting default whitelist 'file,crypto'
[file @ 0x2c99480] Setting default whitelist 'file,crypto'
[hls @ 0x2a0fc00] EXT-X-MEDIA-SEQUENCE:74
[AVIOContext @ 0x29c2ce0] Statistics: 0 seeks, 1 writeouts
[AVIOContext @ 0x2ba60e0] Statistics: 0 seeks, 103 writeouts=N/A speed= 1x
[file @ 0x2a13540] Setting default whitelist 'file,crypto'
[file @ 0x2cab680] Setting default whitelist 'file,crypto'
[hls @ 0x2a0fc00] EXT-X-MEDIA-SEQUENCE:75
[AVIOContext @ 0x2c99480] Statistics: 0 seeks, 1 writeouts
No more output streams to write to, finishing.:46.09 bitrate=N/A speed=0.993x
[AVIOContext @ 0x2ba60e0] Statistics: 0 seeks, 138 writeouts
[file @ 0x29c50c0] Setting default whitelist 'file,crypto'
[hls @ 0x2a0fc00] EXT-X-MEDIA-SEQUENCE:76
[AVIOContext @ 0x2ba60e0] Statistics: 0 seeks, 1 writeouts
frame= 8423 fps= 21 q=-1.0 Lsize=N/A time=00:06:46.09 bitrate=N/A speed=0.993x
video:37031kB audio:1586kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: unknown
Input file #0 (rtsp://172.16.11.247:554/live/ch00_0?token=hQttXvrjSPOcClQB):
Input stream #0:0 (video): 8423 packets read (37919815 bytes);
Input stream #0:1 (audio): 6345 packets read (1624337 bytes);
Total: 14768 packets (39544152 bytes) demuxed
Output file #0 (/home/eason/ffmpeg-test/live.m3u8):
Output stream #0:0 (video): 8423 packets muxed (37919815 bytes);
Output stream #0:1 (audio): 6345 packets muxed (1624337 bytes);
Total: 14768 packets (39544152 bytes) muxed
0 frames successfully decoded, 0 decoding errorsThe problem is that ffmpeg exits randomly after 5 to 20 minutes. The RTSP is a live stream so stopping every 5 minute is really not acceptable. In the ffmpeg log I can’t see any noticeable error except "No more output streams to write to, finishing." near the end. Can someone shed some light upon this ? How can I make ffmpeg run without stopping ? Thanks
-
Streaming H.264 over UDP using FFmpeg, and "dimensions not set" error
3 septembre 2015, par Baris DemirayI’m trying to stream H.264 over UDP with no luck so far. Here is a minimal code that you can reproduce the problem.
To compile,
g++ -o test -lavcodec -lavformat -lavutil test.cpp
Extra information, I start
ffplay
as follows. Currently it’s of no use.ffplay -i udp://127.0.0.1:8554/live.sdp
Output of my code (see
avio_open()
call),[libx264 @ 0x6a26c0] using mv_range_thread = 24
[libx264 @ 0x6a26c0] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.1 Cache64
[libx264 @ 0x6a26c0] profile High, level 3.1
Output #0, h264, to 'udp://127.0.0.1:8554/live.sdp':
Stream #0:0, 0, 0/0: Video: h264 (libx264), -1 reference frame, none, q=-1--1
[h264 @ 0x6a2020] dimensions not set
Cannot write header to stream: SuccessAnd the code,
extern "C" {
#include <libavcodec></libavcodec>avcodec.h>
#include <libavformat></libavformat>avformat.h>
#include <libavutil></libavutil>avutil.h>
}
#include <iostream>
using namespace std;
int main() {
AVCodecContext* m_codecContext;
AVCodec* m_codec;
AVFormatContext* m_formatContext;
AVStream* m_stream;
unsigned m_outWidth = 768;
unsigned m_outHeight = 608;
av_register_all();
avcodec_register_all();
avformat_network_init();
int errorStatus = 0;
char errorLog[128] = { 0 };
av_log_set_level(AV_LOG_TRACE);
string m_output("udp://127.0.0.1:8554/live.sdp");
if (avformat_alloc_output_context2(&m_formatContext, NULL, "h264", m_output.c_str()) < 0) {
cerr << "Cannot allocate output context: "
<< av_make_error_string(errorLog, 128, errorStatus) << endl;
return -1;
}
AVOutputFormat *m_outputFormat = m_formatContext->oformat;
m_codec = avcodec_find_encoder(AV_CODEC_ID_H264);
if (!m_codec) {
cerr << "Cannot find an encoder: "
<< av_make_error_string(errorLog, 128, errorStatus) << endl;
return -1;
}
m_codecContext = avcodec_alloc_context3(m_codec);
if (!m_codecContext) {
cerr << "Cannot allocate a codec context: "
<< av_make_error_string(errorLog, 128, errorStatus) << endl;
return -1;
}
m_codecContext->pix_fmt = AV_PIX_FMT_YUV420P;
m_codecContext->width = m_outWidth;
m_codecContext->height = m_outHeight;
if (avcodec_open2(m_codecContext, m_codec, NULL) < 0) {
cerr << "Cannot open codec: "
<< av_make_error_string(errorLog, 128, errorStatus) << endl;
return -1;
}
m_stream = avformat_new_stream(m_formatContext, m_codec);
if (!m_stream) {
cerr << "Cannot create a new stream: "
<< av_make_error_string(errorLog, 128, errorStatus) << endl;
return -1;
}
av_dump_format(m_formatContext, 0, m_output.c_str(), 1);
if ((errorStatus = avio_open(&m_formatContext->pb, m_output.c_str(), AVIO_FLAG_WRITE)) < 0) {
cerr << "Cannot open output: "
<< av_make_error_string(errorLog, 128, errorStatus) << endl;
return -1;
}
if (avformat_write_header(m_formatContext, NULL) < 0) {
cerr << "Cannot write header to stream: "
<< av_make_error_string(errorLog, 128, errorStatus) << endl;
return -1;
}
cout << "All done." << endl;
return 0;
}
</iostream>For those who has even more time to spare on my problem, when I change
m_output
tortsp://127.0.0.1:8554/live.sdp
, andffplay
command toffplay -rtsp_flags listen -i rtsp://127.0.0.1:8554/live.sdp
I get the error,[libx264 @ 0x1e056c0] using mv_range_thread = 24
[libx264 @ 0x1e056c0] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.1 Cache64
[libx264 @ 0x1e056c0] profile High, level 3.1
Output #0, h264, to 'rtsp://127.0.0.1:8554/live.sdp':
Stream #0:0, 0, 0/0: Video: h264 (libx264), -1 reference frame, none, q=-1--1
Cannot open output: Protocol not foundAm I naive to expect that streaming protocol will be changed like this ?
-
Set protocol-level metadata in AVFormatContext any time a packet is read.
1er août 2014, par Andrew Stone