Recherche avancée

Sur d’autres sites (10163)

• Notes on Linux for Dreamcast

  23 février 2011, par Multimedia Mike — Sega Dreamcast, VP8

  I wanted to write down some notes about compiling Linux on Dreamcast (which I have yet to follow through to success). But before I do, allow me to follow up on my last post where I got Google’s libvpx library decoding VP8 video on the DC. Remember when I said the graphics hardware could only process variations of RGB color formats ? I was mistaken. Reading over some old documentation, I noticed that the DC’s PowerVR hardware can also handle packed YUV textures (UYVY, specifically) :

  
  
  

  The video looks pretty sharp in the small photo. Up close, less so, due to the low resolution and high quantization of the test vector combined with the naive chroma upscaling. For the curious, the grey box surrounding the image highlights the 256-square texture that the video frame gets plotted on. Texture dimensions have to be powers of 2.

  Notes on Linux for Dreamcast
  I’ve occasionally dabbled with Linux on my Dreamcast. There’s an ancient (circa 2001) distro based around a build of kernel 2.4.5 out there. But I wanted to try to get something more current compiled. Thus far, I have figured out how to cross compile kernels pretty handily but have been unsuccessful in making them run.

  Here are notes are the compilation portion :
  

  • kernel.org provides a very useful set of cross compiling toolchains
  • get the gcc 4.5.1 cross toolchain for SH-4 (the gcc 4.3.3 one won’t work because the binutils is too old ; it will fail to assemble certain instructions as described in this post)
  • working off of Linux kernel 2.6.37, edit the top-level Makefile ; find the ARCH and CROSS_COMPILE variables and set appropriately :

    ARCH ?= sh
    CROSS_COMPILE ?= /path/to/gcc-4.5.1-nolibc/sh4-linux/bin/sh4-linux-
    

  • $ make dreamcast_defconfig
  • $ make menuconfig ... if any changes to the default configuration are desired
  • manually edit arch/sh/Makefile, changing :

    cflags-$(CONFIG_CPU_SH4) := $(call cc-option,-m4,) \
            $(call cc-option,-mno-implicit-fp,-m4-nofpu)
    

    to :

    cflags-$(CONFIG_CPU_SH4) := $(call cc-option,-m4,) \
            $(call cc-option,-mno-implicit-fp)
    

    I.e., remove the '-m4-nofpu' option. According to the gcc man page, this will "Generate code for the SH4 without a floating-point unit." Why this is a default is a mystery since the DC’s SH-4 has an FPU and compilation fails when enabling this option.

  • On that note, I was always under the impression that the DC sported an SH-4 CPU with the model number SH7750. According to this LinuxSH wiki page as well as the Linux kernel help, it actually has an SH7091 variant. This photo of the physical DC hardware corroborates the model number.
  • $ make ... to build a Linux kernel for the Sega Dreamcast

  Running
  So I can compile the kernel but running the kernel (the resulting vmlinux ELF file) gives me trouble. The default kernel ELF file reports an entry point of 0x8c002000. Attempting to upload this through the serial uploading facility I have available to me triggers a system reset almost immediately, probably because that’s the same place that the bootloader calls home. I have attempted to alter the starting address via ’make menuconfig’ -> System type -> Memory management options -> Physical memory start address. This allows the upload to complete but it still does not run. It’s worth noting that the 2.4.5 vmlinux file from the old distribution can be executed when uploaded through the serial loader, and it begins at 0x8c210000.

• Announcing the first free software Blu-ray encoder

  25 avril 2010, par Dark Shikari — blu-ray, x264

  For many years it has been possible to make your own DVDs with free software tools. Over the course of the past decade, DVD creation evolved from the exclusive domain of the media publishing companies to something basically anyone could do on their home computer.

  But Blu-ray has yet to get that treatment. Despite the “format war” between Blu-ray and HD DVD ending over two years ago, free software has lagged behind. “Professional” tools for Blu-ray video encoding can cost as much as $100,000 and are often utter garbage. Here are two actual screenshots from real Blu-rays : I wish I was making this up.

  But today, things change. Today we take the first step towards a free software Blu-ray creation toolkit.

  Thanks to tireless work by Kieran Kunyha, Alex Giladi, Lamont Alston, and the Doom9 crowd, x264 can now produce Blu-ray-compliant video. Extra special thanks to The Criterion Collection for sponsoring the final compliance test to confirm x264′s Blu-ray compliance.

  With x264′s powerful compression, as demonstrated by the incredibly popular BD-Rebuilder Blu-ray backup software, it’s quite possible to author Blu-ray disks on DVD9s (dual-layer DVDs) or even DVD5s (single-layer DVDs) with a reasonable level of quality. With a free software encoder and less need for an expensive Blu-ray burner, we are one step closer to putting HD optical media creation in the hands of the everyday user.

  To celebrate this achievement, we are making available for download a demo Blu-ray encoded with x264, containing entirely free content !

  On this Blu-ray are the Open Movie Project films Big Buck Bunny and Elephant’s Dream, available under a Creative Commons license. Additionally, Microsoft has graciously provided about 6 minutes of lossless HD video and audio (from part of a documentary project) under a very liberal license. This footage rounds out the Blu-ray by adding some difficult live-action content in addition to the relatively compressible CGI footage from the Open Movie Project. Finally, we used this sound sample, available under a Creative Commons license.

  You may notice that the Blu-ray image is only just over 2GB. This is intentional ; we have encoded all the content on the disk at appropriate bitrates to be playable from an ordinary 4.7GB DVD. This should make it far easier to burn a copy of the Blu-ray, since Blu-ray burners and writable media are still relatively rare. Most Blu-ray players will treat a DVD containing Blu-ray data as a normal Blu-ray disc. A few, such as the Playstation 3, will not, but you can still play it as a data disc.

  Finally, note that (in accordance with the Blu-ray spec) the disc image file uses the UDF 2.5 filesystem, which may be incompatible with some older virtual drive and DVD burning applications. You’ll also need to play it on an actual Blu-ray player if you want to get the menus and such working correctly. If you’re looking to play it on a PC, a free trial of Arcsoft TMT is available here.

  What are you waiting for ? Grab a copy today !

  UPDATE : Here is an AVCHD-compliant version of the above, which should work better when burned on a DVD-5 instead of a BD-R. (mirror)
  

  What’s left before we have a fully free software Blu-ray creation toolkit ? Audio is already dealt with ; AC3 audio (aka Dolby Digital), the format used in DVD, is still supported by Blu-ray, and there are many free software AC3 encoders. The primary missing application is a free software Blu-ray authoring tool, to combine the video and audio streams to create a Blu-ray file structure with the menus, chapters, and so forth that we have all come to expect. But the hardest part is dealt with : we can now create compatible video and audio streams.

  In the meantime, x264 can be used to create streams to be authored using Blu-Print, Scenarist, Encore or other commercial authoring tools.

  More detailed documentation on the new Blu-ray support and how to use it can be found in the official commit message. Do keep in mind that you have to export to raw H.264 (not MKV or MP4) or else the buffering information will be slightly incorrect. Finally, also note that the encoding settings given as an example are not a good choice for general-purpose encoding : they are intentionally crippled by Blu-ray restrictions, which will significantly reduce compression for ordinary non-Blu-ray encoding.

  In addition to Blu-ray support, the aforementioned commit comes with a lot of fun extras :

  x264 now has native variable-framerate ratecontrol, which makes sure your encodes get a correct target bitrate and proper limiting of maximum bitrate even if the duration of every frame is different and the “framerate” is completely unknown. This helps a lot when encoding from variable-framerate container formats such as FLV and WMV, along with variable-framerate content such as anime.

  x264 now supports pulldown (telecine) in much the same fashion as it is handled in MPEG-2. The calling application can pass in flags representing how to display a frame, allowing easy transcoding from MPEG-2 sources with pulldown, such as broadcast television. The x264 commandline app contains some examples of these (such as the common 3:2 pulldown pattern).

  x264 now also exports HRD timing information, which is critical for compliant transport stream muxing. There is currently an active project to write a fully DVB-compatible free software TS muxer that will be able to interface with x264 for a seamless free software broadcast system. It will likely also be possible to repurpose this muxer as part of a free software Blu-ray authoring package.

  All of this is now available in the latest x264.

  http://mirror05.x264.nl/Dark/bluray%20fail.png

• Bash Script to convert all flv file in a directory to mp3

  11 août 2014, par UnbrandedTech

  This is my code so far.

  #!/bin/bash
  
  #James Kenaley
  
  #Flv to Mp3 directory converter
  
  
  
  find /home/downloads -iname "*.flv" | \
  
  while read I;
  
  do
  
      `ffmpeg -i ${I} -acodec copy  ${I/%.flv/.mp3}`
  
      echo "$I has been converted"
  
  done

  but its picking up white spaces in the names of the flv files and throws a error saying its not in the directory. how do make it use the whole file name and not the just the first word before the space ?