Recherche avancée

Sur d’autres sites (4947)

• Multiple format changes in FFmpeg for thermal camera

  6 février 2023, par Greynol4

  I'm having trouble generating a command to process output from a uvc thermal camera's raw data so that it can be colorized and then output to a virtual device with the intention of streaming it over rtsp. This is on a raspberry pi 3B+ with 32bit bullseye.

  


  The original code that works perfectly for previewing it is :

  


  ffmpeg -input_format yuyv422 -video_size 256x384 -i /dev/video0 -vf 'crop=h=(ih/2):y=(ih/2)' -pix_fmt yuyv422 -f rawvideo - | ffplay -pixel_format gray16le -video_size 256x192 -f rawvideo -i - -vf 'normalize=smoothing=10, format=pix_fmts=rgb48, pseudocolor=p=inferno'


  


  Essentially what this is doing is taking the raw data, cutting the useful portion out, then piping it to ffplay where it is seen as 16bit grayscale (in this case gray16le), then it is normalized, formatted to 48 bit rgb and then a pseudocolor filter is applied.

  


  I haven't been able to get this to translate into ffmpeg-only because it throws codec errors or format errors or converts the 16bit to 10bit even though I need the 16bit. I have tried using v4l2loopback and two instances of ffmpeg in separate windows to see if I could figure out where the error was actually occuring but I suspect that is introducing more format issues that are distracting from the original problem. The closest I have been able to get is

  


  ffmpeg -input_format yuyv422 -video_size 256x384 -i /dev/video0 -vf 'crop=h=(ih/2):y=(ih/2)' -pix_fmt yuyv422 -f rawvideo /dev/video3

  


  Followed by

  


  ffmpeg -video_size 256x192 -i /dev/video3  -f rawvideo -pix_fmt gray16le -vf 'normalize=smoothing=10,format=pix_fmts=rgb48, pseudocolor=p=inferno' -f rawvideo -f v4l2 /dev/video4

  


  This results in a non colorized but somewhat useful image with certain temperatures showing as missing pixels as opposed to the command with ffplay where it shows a properly colorized stream without missing pixels.

  


  I'll include my configuration and log from the preview command but the log doesn't show errors unless I try to modify parameters and presumably mess up the syntax.

  


   ffmpeg -input_format yuyv422 -video_size 256x384 -i /dev/video0 -vf 'crop=h=(ih/2):y=(ih/2)' -pix_fmt yuyv422 -f rawvideo - | ffplay -pixel_format gray16le -video_size 256x192 -f rawvideo -i - -vf 'normalize=smoothing=10, format=pix_fmts=rgb48, pseudocolor=p=inferno'
ffplay version N-109758-gbdc76f467f Copyright (c) 2003-2023 the FFmpeg developers
  built with gcc 10 (Raspbian 10.2.1-6+rpi1)
  configuration: --prefix=/usr/local --enable-nonfree --enable-gpl --enable-hardcoded-tables --disable-ffprobe --disable-ffplay --enable-libx264 --enable-libx265 --enable-sdl --enable-sdl2 --enable-ffplay
  libavutil      57. 44.100 / 57. 44.100
  libavcodec     59. 63.100 / 59. 63.100
  libavformat    59. 38.100 / 59. 38.100
  libavdevice    59.  8.101 / 59.  8.101
  libavfilter     8. 56.100 /  8. 56.100
  libswscale      6.  8.112 /  6.  8.112
  libswresample   4.  9.100 /  4.  9.100
  libpostproc    56.  7.100 / 56.  7.100
ffmpeg version N-109758-gbdc76f467f Copyright (c) 2000-2023 the FFmpeg developers
  built with gcc 10 (Raspbian 10.2.1-6+rpi1)
  configuration: --prefix=/usr/local --enable-nonfree --enable-gpl --enable-hardcoded-tables --disable-ffprobe --disable-ffplay --enable-libx264 --enable-libx265 --enable-sdl --enable-sdl2 --enable-ffplay
  libavutil      57. 44.100 / 57. 44.100
  libavcodec     59. 63.100 / 59. 63.100
  libavformat    59. 38.100 / 59. 38.100
  libavdevice    59.  8.101 / 59.  8.101
  libavfilter     8. 56.100 /  8. 56.100
  libswscale      6.  8.112 /  6.  8.112
  libswresample   4.  9.100 /  4.  9.100
  libpostproc    56.  7.100 / 56.  7.100
Input #0, video4linux2,v4l2, from '/dev/video0':B sq=    0B f=0/0   
  Duration: N/A, start: 242.040935, bitrate: 39321 kb/s
  Stream #0:0: Video: rawvideo (YUY2 / 0x32595559), yuyv422, 256x384, 39321 kb/s, 25 fps, 25 tbr, 1000k tbn
Stream mapping:.000 fd=   0 aq=    0KB vq=    0KB sq=    0B f=0/0   
  Stream #0:0 -> #0:0 (rawvideo (native) -> rawvideo (native))
Press [q] to stop, [?] for help
Output #0, rawvideo, to 'pipe:':   0KB vq=    0KB sq=    0B f=0/0   
  Metadata:
    encoder         : Lavf59.38.100
  Stream #0:0: Video: rawvideo (YUY2 / 0x32595559), yuyv422(tv, progressive), 256x192, q=2-31, 19660 kb/s, 25 fps, 25 tbn
    Metadata:
      encoder         : Lavc59.63.100 rawvideo
frame=    0 fps=0.0 q=0.0 size=       0kB time=-577014:32:22.77 bitrate=  -0.0kbInput #0, rawvideo, from 'fd:':    0KB vq=    0KB sq=    0B f=0/0   
  Duration: N/A, start: 0.000000, bitrate: 19660 kb/s
  Stream #0:0: Video: rawvideo (Y1[0][16] / 0x10003159), gray16le, 256x192, 19660 kb/s, 25 tbr, 25 tbn
frame=   13 fps=0.0 q=-0.0 size=    1152kB time=00:00:00.52 bitrate=18148.4kbitsframe=   25 fps= 24 q=-0.0 size=    2304kB time=00:00:01.00 bitrate=18874.4kbitsframe=   39 fps= 25 q=-0.0 size=    3648kB time=00:00:01.56 bitrate=19156.7kbitsframe=   51 fps= 24 q=-0.0 size=    4800kB time=00:00:02.04 bitrate=19275.3kbitsframe=   64 fps= 24 q=-0.0 size=    6048kB time=00:00:02.56 bitrate=19353.6kbitsframe=   78 fps= 25 q=-0.0 size=    7392kB time=00:00:03.12 bitrate=19408.7kbits




  


  I'd also like to use the correct option so it isn't scrolling though every frame in the log as well as links to resources for adapting a command to a script for beginners even though that's outside the purview of this question so any direction on those would be much appreciated.

  


• FFMPEG image to video showing blank video

  18 avril 2017, par Ravi Rupareliya

  Here is my command to create a video from multiple images.

  File f = new File(Environment.getExternalStorageDirectory() + "/abc.mp4");
  
  
  
  try {
  
      f.createNewFile();
  
      ffmpeg.execute(new String[]{"-y","-r","1/5","-i","" + "/" + "image%01d.jpg","-pix_fmt","yuv420p","-c:v","libx264","-crf","23","-s","640x480",f.getPath()}, listener);
  
  } catch (Exception e) {
  
      e.printStackTrace();
  
  }

  I have multiple images available at with having names like image1.jpg, image2.jpg etc etc.

  It is creating video file with some 100-200 KB but it showing blank images in VLC player.

  When i try to run it with Windows Media Player, it only runs if it is in repeat mode from player, otherwise it is not playing.

  Output in onSuccess()

  [ffmpeg version n3.0.1 Copyright (c) 2000-2016 the FFmpeg developers
  
  built with gcc 4.8 (GCC)
  
  configuration: --target-os=linux --cross-prefix=/home/vagrant/SourceCode/ffmpeg-android/toolchain-android/bin/i686-linux-android- --arch=x86 --cpu=i686 --enable-runtime-cpudetect --sysroot=/home/vagrant/SourceCode/ffmpeg-android/toolchain-android/sysroot --enable-pic --enable-libx264 --enable-libass --enable-libfreetype --enable-libfribidi --enable-libmp3lame --enable-fontconfig --enable-pthreads --disable-debug --disable-ffserver --enable-version3 --enable-hardcoded-tables --disable-ffplay --disable-ffprobe --enable-gpl --enable-yasm --disable-doc --disable-shared --enable-static --pkg-config=/home/vagrant/SourceCode/ffmpeg-android/ffmpeg-pkg-config --prefix=/home/vagrant/SourceCode/ffmpeg-android/build/x86 --extra-cflags='-I/home/vagrant/SourceCode/ffmpeg-android/toolchain-android/include -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -fno-strict-overflow -fstack-protector-all -march=i686' --extra-ldflags='-L/home/vagrant/SourceCode/ffmpeg-android/toolchain-android/lib -Wl,-z,relro -Wl,-z,now -pie' --extra-libs='-lpng -lexpat -lm' --extra-cxxflags=
  
  libavutil      55. 17.103 / 55. 17.103
  
  libavcodec     57. 24.102 / 57. 24.102
  
  libavformat    57. 25.100 / 57. 25.100
  
  libavdevice    57.  0.101 / 57.  0.101
  
  libavfilter     6. 31.100 /  6. 31.100
  
  libswscale      4.  0.100 /  4.  0.100
  
  libswresample   2.  0.101 /  2.  0.101
  
  libpostproc    54.  0.100 / 54.  0.100
  
  [mjpeg @ 0xb97270a0] Changing bps to 8
  
  Input #0, image2, from '/storage/emulated/0/Download/image%01d.jpg':
  
  Duration: 00:00:00.08, start: 0.000000, bitrate: N/A
  
  Stream #0:0: Video: mjpeg, yuvj420p(pc, bt470bg/unknown/unknown), 464x317 [SAR 1:1 DAR 464:317], 25 tbr, 25 tbn, 25 tbc
  
  [swscaler @ 0xb9741480] deprecated pixel format used, make sure you did set range correctly
  
  [libx264 @ 0xb97287c0] using SAR=348/317
  
  [libx264 @ 0xb97287c0] using cpu capabilities: none!
  
  [libx264 @ 0xb97287c0] profile High, level 2.2
  
  [libx264 @ 0xb97287c0] 264 - core 148 - H.264/MPEG-4 AVC codec - Copyleft 2003-2015 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=6 lookahead_threads=1 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=1 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
  
  Output #0, mp4, to '/storage/emulated/0/abc.mp4':
  
  Metadata:
  
  encoder         : Lavf57.25.100
  
  Stream #0:0: Video: h264 (libx264) ([33][0][0][0] / 0x0021), yuv420p, 640x480 [SAR 348:317 DAR 464:317], q=-1--1, 0.20 fps, 16384 tbn, 0.20 tbc
  
  Metadata:
  
  encoder         : Lavc57.24.102 libx264
  
  Side data:
  
  unknown side data type 10 (24 bytes)
  
  Stream mapping:
  
  Stream #0:0 -> #0:0 (mjpeg (native) -> h264 (libx264))
  
  Press [q] to stop, [?] for help
  
  Input stream #0:0 frame changed from size:464x317 fmt:yuvj420p to size:313x470 fmt:yuvj420p
  
  [swscaler @ 0xb9752fc0] deprecated pixel format used, make sure you did set range correctly
  
  frame=    2 fps=0.0 q=-1.0 Lsize=      64kB time=00:00:10.00 bitrate=  52.4kbits/s speed=34.3x    
  
  video:63kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 1.310563%
  
  [libx264 @ 0xb97287c0] frame I:1     Avg QP:14.14  size: 23785
  
  [libx264 @ 0xb97287c0] frame P:1     Avg QP:17.01  size: 40246
  
  [libx264 @ 0xb97287c0] mb I  I16..4:  3.3% 82.2% 14.4%
  
  [libx264 @ 0xb97287c0] mb P  I16..4:  2.0% 88.1%  9.9%  P16..4:  0.0%  0.0%  0.0%  0.0%  0.0%    skip: 0.0%
  
  [libx264 @ 0xb97287c0] 8x8 transform intra:85.2%
  
  [libx264 @ 0xb97287c0] coded y,uvDC,uvAC intra: 93.3% 82.2% 71.0%
  
  [libx264 @ 0xb97287c0] i16 v,h,dc,p:  5%  3%  3% 89%
  
  [libx264 @ 0xb97287c0] i8 v,h,dc,ddl,ddr,vr,

• FFMPEG Steam Stream stop after a few min

  24 novembre 2022, par Fabian Boulegue

  I try set a video stream to STREAM via FFMPEG so far everything works fine but after a few min it just seem to timeout (at last the stream stops but ffmpeg still send everything)

  



  Here is the ffmpeg string

  



  OUTRES="1920x1080"
GOP="60"
GOPMIN="15"
THREADS="4"
CBR="2500k"
QUALITY="ultrafast"
VIDEO="rescue.mp4"
STREAM_KEY="steam_62879128_f5xxxxxxxca5b1c"
SERVER="rtmp://ingest-01-fra1.broadcast.steamcontent.com/app/"

ffmpeg -stream_loop -1 -i $VIDEO -f flv \
-vcodec libx264 -g  $GOP -keyint_min $GOPMIN -b:v $CBR -minrate $CBR -maxrate $CBR -pix_fmt yuv420p \
-s $OUTRES -flvflags no_duration_filesize -preset $QUALITY -tune film -acodec aac -threads $THREADS -strict normal \
-bufsize $CBR "$SERVER$STREAM_KEY"


  



  this is the ffmpeg output

  



    ffmpeg version 3.4.6-0ubuntu0.18.04.1 Copyright (c) 2000-2019 the FFmpeg developers
  built with gcc 7 (Ubuntu 7.3.0-16ubuntu3)
  configuration: --prefix=/usr --extra-version=0ubuntu0.18.04.1 --toolchain=hardened --libdir=/usr/lib/x86_64-linux-gnu --incdir=/usr/include/x86_64-linux-gnu --enable-gpl --disable-stripping --enable-avresample --enable-avisynth --enable-gnutls --enable-ladspa --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librubberband --enable-librsvg --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-omx --enable-openal --enable-opengl --enable-sdl2 --enable-libdc1394 --enable-libdrm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libopencv --enable-libx264 --enable-shared
  libavutil      55. 78.100 / 55. 78.100
  libavcodec     57.107.100 / 57.107.100
  libavformat    57. 83.100 / 57. 83.100
  libavdevice    57. 10.100 / 57. 10.100
  libavfilter     6.107.100 /  6.107.100
  libavresample   3.  7.  0 /  3.  7.  0
  libswscale      4.  8.100 /  4.  8.100
  libswresample   2.  9.100 /  2.  9.100
  libpostproc    54.  7.100 / 54.  7.100
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'rescue.mp4':
  Metadata:
    major_brand     : isom
    minor_version   : 512
    compatible_brands: isomiso2avc1mp41
    encoder         : Lavf57.83.100
  Duration: 00:44:48.08, start: 0.000000, bitrate: 2250 kb/s
    Stream #0:0(und): Video: h264 (High) (avc1 / 0x31637661), yuv420p(tv, bt709), 1920x1080 [SAR 1:1 DAR 16:9], 2114 kb/s, 30 fps, 30 tbr, 15360 tbn, 60 tbc (default)
    Metadata:
      handler_name    : VideoHandler
    Stream #0:1(eng): Audio: aac (LC) (mp4a / 0x6134706D), 44100 Hz, stereo, fltp, 127 kb/s (default)
    Metadata:
      handler_name    : SoundHandler
Stream mapping:
  Stream #0:0 -> #0:0 (h264 (native) -> h264 (libx264))
  Stream #0:1 -> #0:1 (aac (native) -> aac (native))
Press [q] to stop, [?] for help
[libx264 @ 0x55a3ddc7e520] using SAR=1/1
[libx264 @ 0x55a3ddc7e520] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX
[libx264 @ 0x55a3ddc7e520] profile Constrained Baseline, level 4.0
[libx264 @ 0x55a3ddc7e520] 264 - core 152 r2854 e9a5903 - H.264/MPEG-4 AVC codec - Copyleft 2003-2017 - http://www.videolan.org/x264.html - options: cabac=0 ref=1 deblock=0:-1:-1 analyse=0:0 me=dia subme=0 psy=1 psy_rd=1.00:0.15 mixed_ref=0 me_range=16 chroma_me=1 trellis=0 8x8dct=0 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=0 threads=4 lookahead_threads=1 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=0 weightp=0 keyint=60 keyint_min=15 scenecut=0 intra_refresh=0 rc_lookahead=0 rc=cbr mbtree=0 bitrate=2500 ratetol=1.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 vbv_maxrate=2500 vbv_bufsize=2500 nal_hrd=none filler=0 ip_ratio=1.40 aq=0
Output #0, flv, to 'rtmp://ingest-01-fra1.broadcast.steamcontent.com/app/steam_62879128_f5999013aeca5b1c':
  Metadata:
    major_brand     : isom
    minor_version   : 512
    compatible_brands: isomiso2avc1mp41
    encoder         : Lavf57.83.100
    Stream #0:0(und): Video: h264 (libx264) ([7][0][0][0] / 0x0007), yuv420p, 1920x1080 [SAR 1:1 DAR 16:9], q=-1--1, 2500 kb/s, 30 fps, 1k tbn, 30 tbc (default)
    Metadata:
      handler_name    : VideoHandler
      encoder         : Lavc57.107.100 libx264
    Side data:
      cpb: bitrate max/min/avg: 2500000/0/2500000 buffer size: 2500000 vbv_delay: -1
    Stream #0:1(eng): Audio: aac (LC) ([10][0][0][0] / 0x000A), 44100 Hz, stereo, fltp, 128 kb/s (default)
    Metadata:
      handler_name    : SoundHandler
      encoder         : Lavc57.107.100 aac
frame=  479 fps= 74 q=-1.0 Lsize=    4669kB time=00:00:16.13 bitrate=2370.2kbits/s speed=2.49x