Recherche avancée

Sur d’autres sites (4249)

• libx264 encoder error in ffmpeg android build

  26 décembre 2013, par kerim yucel

  Right now, I have a ffmeg build script which recognizes libx264 and compiles succesfully. I have also compiled x264 and obtained libx264.a library. Both ffmpeg and libx264 are built from source. I can build ffmpeg without libx264 succesfully as well. Below you may find my script which tries to build ffmpeg with libx264.

  #!/bin/bash
  
  NDK=~/Android_NDK_r7b
  
  PLATFORM=$NDK/platforms/android-8/arch-arm/
  
  PREBUILT=$NDK/toolchains/arm-linux-androideabi-4.4.3/prebuilt/linux-x86
  
  alitan=~/x264/ndk7_build
  
  function build_one
  
  {
  
  ./configure --target-os=linux \
  
  --prefix=$PREFIX \
  
  --enable-cross-compile \
  
  --extra-libs="-lgcc " \
  
  --arch=arm \
  
  --cc=$PREBUILT/bin/arm-linux-androideabi-gcc \
  
  --cross-prefix=$PREBUILT/bin/arm-linux-androideabi- \
  
  --nm=$PREBUILT/bin/arm-linux-androideabi-nm \
  
  --sysroot=$PLATFORM \
  
  --extra-cflags=" -I$alitan/include" \
  
  --disable-shared \
  
  --enable-static \
  
  --extra-ldflags=" -L$alitan/lib " \
  
  --enable-version3 \
  
  --enable-gpl \
  
  --disable-doc \
  
  --disable-everything \
  
  --enable-libx264 \
  
  --enable-encoder=libx264 \
  
  $ADDITIONAL_CONFIGURE_FLAG
  
  
  
  make clean
  
  make -j4 install
  
  $PREBUILT/bin/arm-linux-androideabi-ar d libavcodec/libavcodec.a inverse.o
  
  $PREBUILT/bin/arm-linux-androideabi-ld -rpath-link=$PLATFORM/usr/lib -L$PLATFORM/usr/lib -soname libffmpeg.so -shared -nostdlib -z,noexecstack -Bsymbolic --whole-archive --no-undefined -o $PREFIX/libffmpeg.so libavcodec/libavcodec.a libavformat/libavformat.a libavutil/libavutil.a libswscale/libswscale.a -lc -lm -lz -ldl -llog --warn-once --dynamic-linker=/system/bin/linker $PREBUILT/lib/gcc/arm-linux-androideabi/4.4.3/libgcc.a
  
  }
  
  
  
  #arm v7vfpv3
  
  CPU=armv7-a
  
  OPTIMIZE_CFLAGS="-mfloat-abi=softfp -mfpu=vfpv3-d16 -marm -march=$CPU "
  
  PREFIX=./DONE/$CPU
  
  ADDITIONAL_CONFIGURE_FLAG=
  
  build_one

  Above script doesn't give me libx264.a in ffmpeg output builds.Several other scenarios are as follows.
  If I enable x264 encoder, I get undefined reference errors to some variables in x264.c (in libavcodec).
  If I enable shared in ffmpeg configure, I get an error which says it can't cd to my prefix directory (no permission issues by the way).

  I am using latest releases of ffmpeg and x264 (cloned the git today) and ndk 7. Ubuntu runs on VM, installed on Windows 7. For further details about my adventure of ffmpeg/x264 porting to Android, you may refer here.

  What should I do to use libx264 with ffmpeg ? I kept on trying this script with different configurations, removed all ffmpeg x264 folders and reinstalled them, but to no avail.

  Thanks a lot in advance.

  EDIT
  Below is my x264 build script. It builds fine, gives me the static library and the headers.

  export ARM_ROOT=/home/mehmet/Android_NDK_r7b
  
  export ARM_INC=$ARM_ROOT/platforms/android-8/arch-arm/usr/include/
  
  export ARM_LIB=$ARM_ROOT/platforms/android-8/arch-arm/usr/lib/
  
  export ARM_TOOL=$ARM_ROOT/toolchains/arm-linux-androideabi-4.4.3/prebuilt/linux-x86
  
  export ARM_LIBO=$ARM_TOOL/lib/gcc/arm-linux-androideabi/4.4.3
  
  export PATH=$ARM_TOOL/bin:$PATH
  
  export PATH=$ARM_TOOL/arm-linux-androideabi/bin:$PATH
  
  export ARM_PRE=arm-linux-androideabi
  
  #tries to build for 4.4.3 toolchain
  
  
  
  ./configure --prefix=./ndk7_build \
  
  --disable-gpac \
  
  --extra-cflags=" -I$ARM_INC -fPIC -DANDROID -fpic -mthumb-interwork -ffunction-sections -funwind-tables -fstack-protector -fno-short-enums -D__ARM_ARCH_5__ -D__ARM_ARCH_5T__ -D__ARM_ARCH_5E__ -D__ARM_ARCH_5TE__ -Wno-psabi -march=armv5te -mtune=xscale -msoft-float -mthumb -Os -fomit-frame-pointer -fno-strict-aliasing -finline-limit=64 -DANDROID -Wa,--noexecstack -MMD -MP " \
  
  --extra-ldflags=" -nostdlib -Bdynamic -Wl,--no-undefined -Wl,-z,noexecstack -Wl,-z,nocopyreloc -Wl,-soname,/system/lib/libz.so -Wl,-rpath-link=$ARM_LIB,-dynamic-linker=/system/bin/linker -L$ARM_LIB -nostdlib $ARM_LIB/crtbegin_dynamic.o $ARM_LIB/crtend_android.o -lc -lm -ldl -lgcc " \
  
  --cross-prefix=${ARM_PRE}- \
  
  --disable-asm \
  
  --enable-static \
  
  --host=arm-linux \

  This is what happens on terminal when i enable libx264 encoder.

  STRIP   ffmpeg
  
  INSTALL install-progs-yes
  
  INSTALL ffmpeg
  
  INSTALL ffprobe
  
  libavcodec/libavcodec.a(libx264.o): In function `X264_frame':
  
  /home/mehmet/ffmpeg/libavcodec/libx264.c:158: undefined reference to `x264_picture_init'
  
  /home/mehmet/ffmpeg/libavcodec/libx264.c:178: undefined reference to `x264_encoder_reconfig'
  
  /home/mehmet/ffmpeg/libavcodec/libx264.c:189: undefined reference to `x264_encoder_encode'
  
  /home/mehmet/ffmpeg/libavcodec/libx264.c:195: undefined reference to `x264_encoder_delayed_frames'
  
  libavcodec/libavcodec.a(libx264.o): In function `encode_nals':
  
  /home/mehmet/ffmpeg/libavcodec/libx264.c:100: undefined reference to `x264_bit_depth'
  
  libavcodec/libavcodec.a(libx264.o): In function `X264_close':
  
  /home/mehmet/ffmpeg/libavcodec/libx264.c:230: undefined reference to `x264_encoder_close'
  
  libavcodec/libavcodec.a(libx264.o): In function `X264_init':
  
  /home/mehmet/ffmpeg/libavcodec/libx264.c:283: undefined reference to `x264_param_default'
  
  /home/mehmet/ffmpeg/libavcodec/libx264.c:291: undefined reference to `x264_param_default_preset'
  
  /home/mehmet/ffmpeg/libavcodec/libx264.c:313: undefined reference to `x264_param_parse'
  
  /home/mehmet/ffmpeg/libavcodec/libx264.c:448: undefined reference to `x264_param_apply_fastfirstpass'
  
  /home/mehmet/ffmpeg/libavcodec/libx264.c:451: undefined reference to `x264_param_apply_profile'
  
  /home/mehmet/ffmpeg/libavcodec/libx264.c:494: undefined reference to `x264_encoder_open_125'
  
  /home/mehmet/ffmpeg/libavcodec/libx264.c:505: undefined reference to `x264_encoder_headers'

• Yet another ffmpeg/libx264 issue

  26 décembre 2013, par kerim yucel

  My current situation is ; ffmpeg and libx264 has been compiled for Android, as shared and static libraries respectively. Since I have libx264.a and libffmpeg.so with me, only thing that remains is to link them and obtain a ffmpeg library that would allow me to proceed with my application. However, some questions remain unanswered. I am using Ubuntu with a virtual machine under Windows 7. I am using x264's last version, ffmpeg 0.10.4 release and NDK 7.

  I have tried to adjust flags (extracf and extrald) in order to include libx264 to ffmpeg compilation process as well, however I keep failing. Below you may find my build script for ffmpeg and the errors I have encountered.

  NDK=~/Android_NDK_r7b 
  
  PLATFORM=$NDK/platforms/android-8/arch-arm/ 
  
  PREBUILT=$NDK/toolchains/arm-linux-androideabi-4.4.3/prebuilt/linux-x86 
  
  x264=/usr/local 
  
  #x264v2=~/x264 
  
  function build_one 
  
  { 
  
  ./configure --target-os=linux \ 
  
      --prefix=$PREFIX \ 
  
      --enable-cross-compile \ 
  
      --extra-libs="-lgcc" \ 
  
      --arch=arm \ 
  
      --cc=$PREBUILT/bin/arm-linux-androideabi-gcc \ 
  
      --cross-prefix=$PREBUILT/bin/arm-linux-androideabi- \ 
  
      --nm=$PREBUILT/bin/arm-linux-androideabi-nm \ 
  
      --sysroot=$PLATFORM \ 
  
     # --extra-cflags=" -O3 -fpic -DANDROID -DHAVE_SYS_UIO_H=1 -Dipv6mr_interface=ipv6mr_ifindex -fasm -Wno-psabi -fno-short-enums -fno-strict-aliasing -finline-limit=300 $OPTIMIZE_CFLAGS " \ 
  
      --extra-cflags="-I$x264/include" \ 
  
      --enable-shared \ 
  
      --enable-static \ 
  
      #--extra-ldflags="-Wl,-rpath-link=$PLATFORM/usr/lib  -L$PLATFORM/usr/lib -nostdlib -lc -lm -ldl -llog" \ 
  
      --extra-ldflags="-L$x264/lib" \ 
  
     --disable-everything \ 
  
     # --enable-demuxer=mov \ 
  
     # --enable-demuxer=h264 \ 
  
     # --disable-ffplay \ 
  
      --enable-gpl \ 
  
      --enable-libx264 \ 
  
     # --enable-protocol=file \ 
  
     # --enable-avformat \ 
  
     # --enable-avcodec \ 
  
     # --enable-encoder=libx264 \ 
  
     # --enable-decoder=rawvideo \ 
  
     #--enable-decoder=mjpeg \ 
  
     # --enable-decoder=h263 \ 
  
     # --enable-decoder=mpeg4 \ 
  
     # --enable-encoder=h264 \ 
  
     # --disable-network \ 
  
      #--enable-zlib \ 
  
     # --disable-avfilter \ 
  
      #--disable-avdevice \ 
  
      $ADDITIONAL_CONFIGURE_FLAG 
  
  
  
  make clean 
  
  make  -j4 install 
  
  $PREBUILT/bin/arm-linux-androideabi-ar d libavcodec/libavcodec.a inverse.o 
  
  $PREBUILT/bin/arm-linux-androideabi-ld -rpath-link=$PLATFORM/usr/lib -L$PLATFORM/usr/lib  -soname libffmpeg.so -shared -nostdlib  -z,noexecstack -Bsymbolic --whole-archive --no-undefined -o $PREFIX/libffmpeg.so libavcodec/libavcodec.a libavformat/libavformat.a libavutil/libavutil.a libswscale/libswscale.a -lc -lm -lz -ldl -llog  --warn-once  --dynamic-linker=/system/bin/linker $PREBUILT/lib/gcc/arm-linux-androideabi/4.4.3/libgcc.a 
  
  } 
  
  
  
  #arm v7vfpv3 
  
  CPU=armv7-a 
  
  OPTIMIZE_CFLAGS="-mfloat-abi=softfp -mfpu=vfpv3-d16 -marm -march=$CPU " 
  
  PREFIX=./androidIncludeTrialsNDK7/$CPU 
  
  ADDITIONAL_CONFIGURE_FLAG= 
  
  build_one 

  If I basically delete the lines extracf and extrald flags and use other ones (commented outs), it works fine except libx264 not found error. Otherwise, I get the following erros.

  ./buildnew.sh: line 35: --extra-cflags=-I/usr/local/include: No such file or directory 
  
  ./buildnew.sh: line 38: --extra-ldflags=-L/usr/local/lib: No such file or directory 
  
  ./buildnew.sh: line 40: --disable-everything: command not found 
  
  ./buildnew.sh: line 44: --enable-gpl: command not found 

  The compilation process ends with the following.

  make: *** [libavdevice/v4l.o] Error 1 
  
  make: *** Waiting for unfinished jobs.... 
  
  /home/mehmet/Android_NDK_r7b/toolchains/arm-linux-androideabi-4.4.3/prebuilt/linux-x86/bin/arm-linux-androideabi-ar: creating libavcodec/libavcodec.a 
  
  /home/mehmet/Android_NDK_r7b/toolchains/arm-linux-androideabi-4.4.3/prebuilt/linux-x86/bin/arm-linux-androideabi-ld: cannot open output file ./androidIncludeTrialsNDK7/armv7-a/libffmpeg.so: No such file or directory 

  I have x264 installed in my directory /home/mehmet/x264 and I also check whereis x264.a, it shows me as /usr/local/lib. I have tried changing the path $x264 to point out to home/mehmet/x264 folder, but I get the same error.

  Lastly, if I enable both extracf and extrald flags ( both commented ones and the used ones) . I get the same error mentioned above. I am afraid I am doing a simple typo here, but can`t see it and it is driving me crazy. Thanks a lot for your help.

  Best.

  EDIT

  I have deleted the comments and now obtain the following.

  ./buildnew.sh: 4: ./buildnew.sh: function: not found
  
  ERROR: libx264 not found

  Above error is observed from the terminal when I run the script. It build upto some point and finishes the process with the following error.

  libavcodec/libavcodec.a(libx264.o): In function `X264_frame':
  
  /home/mehmet/ffmpeg-0.10.4/libavcodec/libx264.c:159: undefined reference to `x264_picture_init'
  
  /home/mehmet/ffmpeg-0.10.4/libavcodec/libx264.c:179: undefined reference to `x264_encoder_reconfig'
  
  /home/mehmet/ffmpeg-0.10.4/libavcodec/libx264.c:191: undefined reference to `x264_encoder_encode'
  
  /home/mehmet/ffmpeg-0.10.4/libavcodec/libx264.c:197: undefined reference to `x264_encoder_delayed_frames'
  
  libavcodec/libavcodec.a(libx264.o): In function `encode_nals':
  
  /home/mehmet/ffmpeg-0.10.4/libavcodec/libx264.c:196: undefined reference to `x264_bit_depth'
  
  libavcodec/libavcodec.a(libx264.o): In function `X264_close':
  
  /home/mehmet/ffmpeg-0.10.4/libavcodec/libx264.c:231: undefined reference to `x264_encoder_close'
  
  libavcodec/libavcodec.a(libx264.o): In function `X264_init':
  
  /home/mehmet/ffmpeg-0.10.4/libavcodec/libx264.c:284: undefined reference to `x264_param_default'
  
  /home/mehmet/ffmpeg-0.10.4/libavcodec/libx264.c:292: undefined reference to `x264_param_default_preset'
  
  /home/mehmet/ffmpeg-0.10.4/libavcodec/libx264.c:305: undefined reference to `x264_param_parse'
  
  /home/mehmet/ffmpeg-0.10.4/libavcodec/libx264.c:502: undefined reference to `x264_param_apply_fastfirstpass'
  
  /home/mehmet/ffmpeg-0.10.4/libavcodec/libx264.c:505: undefined reference to `x264_param_apply_profile'
  
  /home/mehmet/ffmpeg-0.10.4/libavcodec/libx264.c:544: undefined reference to `x264_encoder_open_125'
  
  /home/mehmet/ffmpeg-0.10.4/libavcodec/libx264.c:554: undefined reference to `x264_encoder_headers'
  
  ./buildnew.sh: 51: ./buildnew.sh: build_one: not found

• Yet another ffmpeg/libx264 issue

  26 décembre 2013, par kerim yucel

  My current situation is ; ffmpeg and libx264 has been compiled for Android, as shared and static libraries respectively. Since I have libx264.a and libffmpeg.so with me, only thing that remains is to link them and obtain a ffmpeg library that would allow me to proceed with my application. However, some questions remain unanswered. I am using Ubuntu with a virtual machine under Windows 7. I am using x264’s last version, ffmpeg 0.10.4 release and NDK 7.

  I have tried to adjust flags (extracf and extrald) in order to include libx264 to ffmpeg compilation process as well, however I keep failing. Below you may find my build script for ffmpeg and the errors I have encountered.

  NDK=~/Android_NDK_r7b 
  
  PLATFORM=$NDK/platforms/android-8/arch-arm/ 
  
  PREBUILT=$NDK/toolchains/arm-linux-androideabi-4.4.3/prebuilt/linux-x86 
  
  x264=/usr/local 
  
  #x264v2=~/x264 
  
  function build_one 
  
  { 
  
  ./configure --target-os=linux \ 
  
      --prefix=$PREFIX \ 
  
      --enable-cross-compile \ 
  
      --extra-libs="-lgcc" \ 
  
      --arch=arm \ 
  
      --cc=$PREBUILT/bin/arm-linux-androideabi-gcc \ 
  
      --cross-prefix=$PREBUILT/bin/arm-linux-androideabi- \ 
  
      --nm=$PREBUILT/bin/arm-linux-androideabi-nm \ 
  
      --sysroot=$PLATFORM \ 
  
     # --extra-cflags=" -O3 -fpic -DANDROID -DHAVE_SYS_UIO_H=1 -Dipv6mr_interface=ipv6mr_ifindex -fasm -Wno-psabi -fno-short-enums -fno-strict-aliasing -finline-limit=300 $OPTIMIZE_CFLAGS " \ 
  
      --extra-cflags="-I$x264/include" \ 
  
      --enable-shared \ 
  
      --enable-static \ 
  
      #--extra-ldflags="-Wl,-rpath-link=$PLATFORM/usr/lib  -L$PLATFORM/usr/lib -nostdlib -lc -lm -ldl -llog" \ 
  
      --extra-ldflags="-L$x264/lib" \ 
  
     --disable-everything \ 
  
     # --enable-demuxer=mov \ 
  
     # --enable-demuxer=h264 \ 
  
     # --disable-ffplay \ 
  
      --enable-gpl \ 
  
      --enable-libx264 \ 
  
     # --enable-protocol=file \ 
  
     # --enable-avformat \ 
  
     # --enable-avcodec \ 
  
     # --enable-encoder=libx264 \ 
  
     # --enable-decoder=rawvideo \ 
  
     #--enable-decoder=mjpeg \ 
  
     # --enable-decoder=h263 \ 
  
     # --enable-decoder=mpeg4 \ 
  
     # --enable-encoder=h264 \ 
  
     # --disable-network \ 
  
      #--enable-zlib \ 
  
     # --disable-avfilter \ 
  
      #--disable-avdevice \ 
  
      $ADDITIONAL_CONFIGURE_FLAG 
  
  
  
  make clean 
  
  make  -j4 install 
  
  $PREBUILT/bin/arm-linux-androideabi-ar d libavcodec/libavcodec.a inverse.o 
  
  $PREBUILT/bin/arm-linux-androideabi-ld -rpath-link=$PLATFORM/usr/lib -L$PLATFORM/usr/lib  -soname libffmpeg.so -shared -nostdlib  -z,noexecstack -Bsymbolic --whole-archive --no-undefined -o $PREFIX/libffmpeg.so libavcodec/libavcodec.a libavformat/libavformat.a libavutil/libavutil.a libswscale/libswscale.a -lc -lm -lz -ldl -llog  --warn-once  --dynamic-linker=/system/bin/linker $PREBUILT/lib/gcc/arm-linux-androideabi/4.4.3/libgcc.a 
  
  } 
  
  
  
  #arm v7vfpv3 
  
  CPU=armv7-a 
  
  OPTIMIZE_CFLAGS="-mfloat-abi=softfp -mfpu=vfpv3-d16 -marm -march=$CPU " 
  
  PREFIX=./androidIncludeTrialsNDK7/$CPU 
  
  ADDITIONAL_CONFIGURE_FLAG= 
  
  build_one 

  If I basically delete the lines extracf and extrald flags and use other ones (commented outs), it works fine except libx264 not found error. Otherwise, I get the following erros.

  ./buildnew.sh: line 35: --extra-cflags=-I/usr/local/include: No such file or directory 
  
  ./buildnew.sh: line 38: --extra-ldflags=-L/usr/local/lib: No such file or directory 
  
  ./buildnew.sh: line 40: --disable-everything: command not found 
  
  ./buildnew.sh: line 44: --enable-gpl: command not found 

  The compilation process ends with the following.

  make: *** [libavdevice/v4l.o] Error 1 
  
  make: *** Waiting for unfinished jobs.... 
  
  /home/mehmet/Android_NDK_r7b/toolchains/arm-linux-androideabi-4.4.3/prebuilt/linux-x86/bin/arm-linux-androideabi-ar: creating libavcodec/libavcodec.a 
  
  /home/mehmet/Android_NDK_r7b/toolchains/arm-linux-androideabi-4.4.3/prebuilt/linux-x86/bin/arm-linux-androideabi-ld: cannot open output file ./androidIncludeTrialsNDK7/armv7-a/libffmpeg.so: No such file or directory 

  I have x264 installed in my directory /home/mehmet/x264 and I also check whereis x264.a, it shows me as /usr/local/lib. I have tried changing the path $x264 to point out to home/mehmet/x264 folder, but I get the same error.

  Lastly, if I enable both extracf and extrald flags ( both commented ones and the used ones) . I get the same error mentioned above. I am afraid I am doing a simple typo here, but can`t see it and it is driving me crazy. Thanks a lot for your help.

  Best.

  EDIT

  I have deleted the comments and now obtain the following.

  ./buildnew.sh: 4: ./buildnew.sh: function: not found
  
  ERROR: libx264 not found

  Above error is observed from the terminal when I run the script. It build upto some point and finishes the process with the following error.

  libavcodec/libavcodec.a(libx264.o): In function `X264_frame':
  
  /home/mehmet/ffmpeg-0.10.4/libavcodec/libx264.c:159: undefined reference to `x264_picture_init'
  
  /home/mehmet/ffmpeg-0.10.4/libavcodec/libx264.c:179: undefined reference to `x264_encoder_reconfig'
  
  /home/mehmet/ffmpeg-0.10.4/libavcodec/libx264.c:191: undefined reference to `x264_encoder_encode'
  
  /home/mehmet/ffmpeg-0.10.4/libavcodec/libx264.c:197: undefined reference to `x264_encoder_delayed_frames'
  
  libavcodec/libavcodec.a(libx264.o): In function `encode_nals':
  
  /home/mehmet/ffmpeg-0.10.4/libavcodec/libx264.c:196: undefined reference to `x264_bit_depth'
  
  libavcodec/libavcodec.a(libx264.o): In function `X264_close':
  
  /home/mehmet/ffmpeg-0.10.4/libavcodec/libx264.c:231: undefined reference to `x264_encoder_close'
  
  libavcodec/libavcodec.a(libx264.o): In function `X264_init':
  
  /home/mehmet/ffmpeg-0.10.4/libavcodec/libx264.c:284: undefined reference to `x264_param_default'
  
  /home/mehmet/ffmpeg-0.10.4/libavcodec/libx264.c:292: undefined reference to `x264_param_default_preset'
  
  /home/mehmet/ffmpeg-0.10.4/libavcodec/libx264.c:305: undefined reference to `x264_param_parse'
  
  /home/mehmet/ffmpeg-0.10.4/libavcodec/libx264.c:502: undefined reference to `x264_param_apply_fastfirstpass'
  
  /home/mehmet/ffmpeg-0.10.4/libavcodec/libx264.c:505: undefined reference to `x264_param_apply_profile'
  
  /home/mehmet/ffmpeg-0.10.4/libavcodec/libx264.c:544: undefined reference to `x264_encoder_open_125'
  
  /home/mehmet/ffmpeg-0.10.4/libavcodec/libx264.c:554: undefined reference to `x264_encoder_headers'
  
  ./buildnew.sh: 51: ./buildnew.sh: build_one: not found