Recherche avancée

Sur d’autres sites (4971)

• ffmpeg filter_complex concat never completes

  10 juillet 2020, par seawolf

  I am trying to concatenate mp4 files into a single file. I am attempting to use the concat filter directly for reasons independent from this question (so -i list.txt is not a valid solution). All video files in question are between 4 and 20 minutes in length.

  


  What I am executing :

  


  % ffmpeg -i f01.mp4 -i f02.mp4 -filter_complex "[0:v][0:a][1:v][1:a]concat=n=2:v=1:a=1[v][a]" -map "[v]" -map "[a]" output.mp4


  


  This is my understanding of the form of this command from references such as FFmpeg Filters Documentation : concat and Concatenate Videos Together Using FFMPEG !.

  


  What happens :

  


  ffmpeg gives a lot of output as it checks the metadata for each stream and then begins processing. After a short duration (several seconds to a minute or so, seems to be prortional to the duration of the first video) I start seeing messages like this :

  


  More than 1000 frames duplicated
More than 10000 frames duplicated     512kB time=00:00:00.12 bitrate=32771.0kbits/s dup=33365 drop=0 speed=0.00449x
More than 100000 frames duplicated   1280kB time=00:00:00.17 bitrate=61442.1kbits/s dup=66730 drop=0 speed=0.00272x


  


  ... and then the process never completes. If I leave my computer running for 24 hours, ffmpeg is still using max available CPU (200-300%). The output file is 48 bytes in length.

  


  Note : the inputs are only a few minutes each, so individually re-encoding the inputs would take only a few minutes each.

  


  Note : if I change the command to use f01.mp4 for both source 0 and source 1, the command completes as expected in under 5 minutes :

  


  % # example that works:
% # note, however, that this just repeats the same source twice
% ffmpeg -i f01.mp4 -i f01.mp4 -filter_complex "[0:v][0:a][1:v][1:a]concat=n=2:v=1:a=1[v][a]" -map "[v]" -map "[a]" output.mp4


  


  Full output :

  


  Here is the complete output of a run in case it's helpful :

  


  % ffmpeg -i f01.mp4 -i f02.mp4 -filter_complex "[0:v][0:a][1:v][1:a]concat=n=2:v=1:a=1[v][a]" -map "[v]" -map "[a]" output.mp4
ffmpeg version 4.3 Copyright (c) 2000-2020 the FFmpeg developers
  built with Apple clang version 11.0.3 (clang-1103.0.32.62)
  configuration: --prefix=/usr/local/Cellar/ffmpeg/4.3_2 --enable-shared --enable-pthreads --enable-version3 --enable-avresample --cc=clang --host-cflags= --host-ldflags= --enable-ffplay --enable-gnutls --enable-gpl --enable-libaom --enable-libbluray --enable-libdav1d --enable-libmp3lame --enable-libopus --enable-librav1e --enable-librubberband --enable-libsnappy --enable-libsrt --enable-libtesseract --enable-libtheora --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxvid --enable-lzma --enable-libfontconfig --enable-libfreetype --enable-frei0r --enable-libass --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-librtmp --enable-libspeex --enable-libsoxr --enable-videotoolbox --disable-libjack --disable-indev=jack
  libavutil      56. 51.100 / 56. 51.100
  libavcodec     58. 91.100 / 58. 91.100
  libavformat    58. 45.100 / 58. 45.100
  libavdevice    58. 10.100 / 58. 10.100
  libavfilter     7. 85.100 /  7. 85.100
  libavresample   4.  0.  0 /  4.  0.  0
  libswscale      5.  7.100 /  5.  7.100
  libswresample   3.  7.100 /  3.  7.100
  libpostproc    55.  7.100 / 55.  7.100
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'f01.mp4':
  Metadata:
    major_brand     : mp42
    minor_version   : 512
    compatible_brands: isomiso2avc1mp41
    creation_time   : 2020-06-04T21:34:26.000000Z
    encoder         : HandBrake 1.3.2 2020050300
  Duration: 00:04:14.66, start: 0.000000, bitrate: 525 kb/s
    Stream #0:0(und): Video: h264 (Main) (avc1 / 0x31637661), yuv420p(tv, smpte170m/smpte170m/bt709), 708x478 [SAR 8:9 DAR 944:717], 366 kb/s, 29.97 fps, 29.97 tbr, 90k tbn, 180k tbc (default)
    Metadata:
      creation_time   : 2020-06-04T21:34:26.000000Z
      handler_name    : VideoHandler
    Stream #0:1(jpn): Audio: aac (LC) (mp4a / 0x6134706D), 48000 Hz, stereo, fltp, 149 kb/s (default)
    Metadata:
      creation_time   : 2020-06-04T21:34:26.000000Z
      handler_name    : Stereo
Input #1, mov,mp4,m4a,3gp,3g2,mj2, from 'f02.mp4':
  Metadata:
    major_brand     : mp42
    minor_version   : 512
    compatible_brands: isomiso2avc1mp41
    creation_time   : 2020-06-04T21:38:15.000000Z
    encoder         : HandBrake 1.3.2 2020050300
  Duration: 00:06:30.95, start: 0.000000, bitrate: 1328 kb/s
    Stream #1:0(und): Video: h264 (Main) (avc1 / 0x31637661), yuv420p(tv, smpte170m/smpte170m/bt709), 708x478 [SAR 8:9 DAR 944:717], 1179 kb/s, 29.97 fps, 30 tbr, 90k tbn, 180k tbc (default)
    Metadata:
      creation_time   : 2020-06-04T21:38:15.000000Z
      handler_name    : VideoHandler
    Stream #1:1(jpn): Audio: aac (LC) (mp4a / 0x6134706D), 48000 Hz, stereo, fltp, 140 kb/s (default)
    Metadata:
      creation_time   : 2020-06-04T21:38:15.000000Z
      handler_name    : Stereo
File 'output.mp4' already exists. Overwrite? [y/N] y
Stream mapping:
  Stream #0:0 (h264) -> concat:in0:v0
  Stream #0:1 (aac) -> concat:in0:a0
  Stream #1:0 (h264) -> concat:in1:v0
  Stream #1:1 (aac) -> concat:in1:a0
  concat:out:v0 -> Stream #0:0 (libx264)
  concat:out:a0 -> Stream #0:1 (aac)
Press [q] to stop, [?] for help
[mp4 @ 0x7ff130014000] Frame rate very high for a muxer not efficiently supporting it.
Please consider specifying a lower framerate, a different muxer or -vsync 2
[libx264 @ 0x7ff130021200] using SAR=8/9
[libx264 @ 0x7ff130021200] MB rate (1350000000) > level limit (16711680)
[libx264 @ 0x7ff130021200] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 BMI2 AVX2
[libx264 @ 0x7ff130021200] profile High, level 6.2, 4:2:0, 8-bit
[libx264 @ 0x7ff130021200] 264 - core 160 r3011 cde9a93 - H.264/MPEG-4 AVC codec - Copyleft 2003-2020 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=6 lookahead_threads=1 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
Output #0, mp4, to 'output.mp4':
  Metadata:
    major_brand     : mp42
    minor_version   : 512
    compatible_brands: isomiso2avc1mp41
    encoder         : Lavf58.45.100
    Stream #0:0: Video: h264 (libx264) (avc1 / 0x31637661), yuv420p(progressive), 708x478 [SAR 8:9 DAR 944:717], q=-1--1, 1000k tbn, 1000k tbc (default)
    Metadata:
      encoder         : Lavc58.91.100 libx264
    Side data:
      cpb: bitrate max/min/avg: 0/0/0 buffer size: 0 vbv_delay: N/A
    Stream #0:1: Audio: aac (LC) (mp4a / 0x6134706D), 48000 Hz, stereo, fltp, 128 kb/s (default)
    Metadata:
      encoder         : Lavc58.91.100 aac
More than 1000 frames duplicated
More than 10000 frames duplicated     512kB time=00:00:00.12 bitrate=32771.0kbits/s dup=33365 drop=0 speed=0.00449x
More than 100000 frames duplicated   1280kB time=00:00:00.17 bitrate=61442.1kbits/s dup=66730 drop=0 speed=0.00272x
frame=667333 fps=1079 q=33.0 size=   14848kB time=00:00:00.76 bitrate=158379.2kbits/s dup=667312 drop=0 speed=0.00124x


  


• libav ffmpeg - streaming from both a mkv and input stream

  20 janvier 2020, par kealist

  I am trying to use ffmpeg libraries in C# with AutoGen bindings. The overall issue is that I am taking a collection of sources, some streams, and some .mkv containing recordings of a stream. As for now, they are all h264 and only video. For input streams, I am able to adjust the packets and broad cast them and that works fine, but any time I try to call av_interleaved_write_frame with packets from the MKV file, I get the error Error occurred: Invalid data found when processing input.

  Here is the main loop, where the error happens for mkv files. Is there an extra step ?

  /* read all packets */
  
  while (true)
  
  {
  
      if ((ret = ffmpeg.av_read_frame(ifmt_ctx, &packet)) < 0)
  
      {
  
          Console.WriteLine("Unable to read packet");
  
          break;
  
      }
  
      stream_index = (uint)packet.stream_index;
  
      type = ifmt_ctx->streams[packet.stream_index]->codecpar->codec_type;
  
      Console.WriteLine($"Demuxer gave frame of stream_index %{stream_index}");
  
  
  
  
  
      /* remux this frame without reencoding */
  
      ffmpeg.av_packet_rescale_ts(&packet,
  
          ifmt_ctx->streams[stream_index]->time_base,
  
          ofmt_ctx->streams[stream_index]->time_base);
  
  
  
      if (packet.stream_index < 0)
  
      {
  
          Console.WriteLine("Packet stream error");
  
      }
  
  
  
  
  
  
  
      ret = ffmpeg.av_write_frame(ofmt_ctx, &packet);
  
      if (ret < 0)
  
      {
  
          goto end;
  
      }
  
      else
  
      {
  
          ffmpeg.av_packet_unref(&packet);
  
      }
  
  }

  Anything need to be different for MKV files ?

  I get some contradictory error output where it claims it is annex b but also isn’t :

  [AVBSFContext @ 00000220eb657080] The input looks like it is Annex B already
  
  Automatically inserted bitstream filter 'h264_mp4toannexb'; args=''
  
  [mpegts @ 00000220ebace300] H.264 bitstream malformed, no startcode found, use the video bitstream filter 'h264_mp4toannexb' to fix it ('-bsf:v h264_mp4toannexb' option with ffmpeg)

  Verbose output from ffplay from an MKV file :

  ffplay version git-2020-01-13-7225479 Copyright (c) 2003-2020 the FFmpeg developers
  
    built with gcc 9.2.1 (GCC) 20200111
  
    configuration: --enable-gpl --enable-version3 --enable-sdl2 --enable-fontconfig --enable-gnutls --enable-iconv --enable-libass --enable-libdav1d --enable-libbluray --enable-libfreetype --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libopus --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libtheora --enable-libtwolame --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxml2 --enable-libzimg --enable-lzma --enable-zlib --enable-gmp --enable-libvidstab --enable-libvorbis --enable-libvo-amrwbenc --enable-libmysofa --enable-libspeex --enable-libxvid --enable-libaom --enable-libmfx --enable-ffnvcodec --enable-cuvid --enable-d3d11va --enable-nvenc --enable-nvdec --enable-dxva2 --enable-avisynth --enable-libopenmpt --enable-amf
  
    libavutil      56. 38.100 / 56. 38.100
  
    libavcodec     58. 65.103 / 58. 65.103
  
    libavformat    58. 35.102 / 58. 35.102
  
    libavdevice    58.  9.103 / 58.  9.103
  
    libavfilter     7. 71.100 /  7. 71.100
  
    libswscale      5.  6.100 /  5.  6.100
  
    libswresample   3.  6.100 /  3.  6.100
  
    libpostproc    55.  6.100 / 55.  6.100
  
  Initialized direct3d renderer.
  
  [h264 @ 00000165ed18d140] Reinit context to 640x480, pix_fmt: yuv444p
  
  Input #0, matroska,webm, from '.\webcam_14_Test1.mkv':   0B f=0/0
  
    Metadata:
  
      ENCODER         : Lavf58.12.100
  
    Duration: 00:00:39.30, start: 0.000000, bitrate: 1943 kb/s
  
      Stream #0:0: Video: h264 (High 4:4:4 Predictive), 1 reference frame, yuv444p(progressive, left), 640x480 [SAR 1:1 DAR 4:3], 1k fps, 30 tbr, 1k tbn, 60 tbc (default)
  
      Metadata:
  
        DURATION        : 00:00:39.299000000
  
  [h264 @ 00000165f424e200] Reinit context to 640x480, pix_fmt: yuv444p
  
  [ffplay_buffer @ 00000165f52ea840] w:640 h:480 pixfmt:yuv444p tb:1/1000 fr:30/1 sar:1/1
  
  [auto_scaler_0 @ 00000165ed1d2c80] w:iw h:ih flags:'bicubic' interl:0
  
  [ffplay_buffersink @ 00000165f424ef00] auto-inserting filter 'auto_scaler_0' between the filter 'ffplay_buffer' and the filter 'ffplay_buffersink'
  
  [auto_scaler_0 @ 00000165ed1d2c80] w:640 h:480 fmt:yuv444p sar:1/1 -> w:640 h:480 fmt:yuv420p sar:1/1 flags:0x4
  
  Created 640x480 texture with SDL_PIXELFORMAT_IYUV.
  
  [AVIOContext @ 00000165ed179a40] Statistics: 9547965 bytes read, 0 seeks

• Unable to load FFMPEG library "java.lang.UnsatisfiedLinkError : dlopen failed :"

  25 janvier 2020, par Vicky

  I am trying to build and run old ffmpeg project which, it was in eclipse and now i am trying to run it from Android studio, but app crash displaying below error.

  2020-01-25 11:57:52.621 26360-26360/org.lance.ffplayer E/AndroidRuntime: FATAL EXCEPTION: main
  
  Process: org.lance.ffplayer, PID: 26360
  
  java.lang.UnsatisfiedLinkError: dlopen failed: library "./obj/local/armeabi/libffmpeg.so" not found
  
      at java.lang.Runtime.loadLibrary0(Runtime.java:1016)
  
      at java.lang.System.loadLibrary(System.java:1669)
  
      at org.lance.ffplayer.FFmpeg.<clinit>(FFmpeg.java:17)
  
      at org.lance.ffplayer.FFmpeg.getInstance(FFmpeg.java:87)
  
      at org.lance.ffplayer.FileBrowser.<init>(FileBrowser.java:41)
  
      at org.lance.ffplayer.UIActivity.onCreate(UIActivity.java:39)
  
      at android.app.Activity.performCreate(Activity.java:7327)
  
      at android.app.Activity.performCreate(Activity.java:7318)
  
      at android.app.Instrumentation.callActivityOnCreate(Instrumentation.java:1275)
  
      at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:3101)
  
      at android.app.ActivityThread.handleLaunchActivity(ActivityThread.java:3264)
  
      at android.app.servertransaction.LaunchActivityItem.execute(LaunchActivityItem.java:78)
  
      at android.app.servertransaction.TransactionExecutor.executeCallbacks(TransactionExecutor.java:108)
  
      at android.app.servertransaction.TransactionExecutor.execute(TransactionExecutor.java:68)
  
      at android.app.ActivityThread$H.handleMessage(ActivityThread.java:1955)
  
      at android.os.Handler.dispatchMessage(Handler.java:106)
  
      at android.os.Looper.loop(Looper.java:214)
  
      at android.app.ActivityThread.main(ActivityThread.java:7078)
  
      at java.lang.reflect.Method.invoke(Native Method)
  
      at com.android.internal.os.RuntimeInit$MethodAndArgsCaller.run(RuntimeInit.java:494)
  
      at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:974)
  
  </init></clinit>

  Below are configuration of my project,

  Android studio configuration image link - 1

  Android studio configuration image link - 2

  I have spent my entire day to solve this issue but everything failed. Anybody has idea about what i am missing and doing wrong ?
  Thanks in advance.