Recherche avancée
Autres articles (36)
-
Installation en mode ferme
4 février 2011, parLe mode ferme permet d’héberger plusieurs sites de type MediaSPIP en n’installant qu’une seule fois son noyau fonctionnel.
C’est la méthode que nous utilisons sur cette même plateforme.
L’utilisation en mode ferme nécessite de connaïtre un peu le mécanisme de SPIP contrairement à la version standalone qui ne nécessite pas réellement de connaissances spécifique puisque l’espace privé habituel de SPIP n’est plus utilisé.
Dans un premier temps, vous devez avoir installé les mêmes fichiers que l’installation (...) -
HTML5 audio and video support
13 avril 2011, parMediaSPIP uses HTML5 video and audio tags to play multimedia files, taking advantage of the latest W3C innovations supported by modern browsers.
The MediaSPIP player used has been created specifically for MediaSPIP and can be easily adapted to fit in with a specific theme.
For older browsers the Flowplayer flash fallback is used.
MediaSPIP allows for media playback on major mobile platforms with the above (...) -
Support audio et vidéo HTML5
10 avril 2011MediaSPIP utilise les balises HTML5 video et audio pour la lecture de documents multimedia en profitant des dernières innovations du W3C supportées par les navigateurs modernes.
Pour les navigateurs plus anciens, le lecteur flash Flowplayer est utilisé.
Le lecteur HTML5 utilisé a été spécifiquement créé pour MediaSPIP : il est complètement modifiable graphiquement pour correspondre à un thème choisi.
Ces technologies permettent de distribuer vidéo et son à la fois sur des ordinateurs conventionnels (...)
Sur d’autres sites (7143)
-
ffmpeg hls video recording timing inforamtion is inaccurate
27 juin 2018, par HarisI am recording the rtsp stream in HLS format which is working fine with below command.
~/bin/ffmpeg -i rtsp://10.0.7.39:554/media/live/1/1 -c:a aac -c:v copy -hls_list_size 65535 -hls_time 2 live.m3u8But when I check the the duration of each
tsfile withlive.m3u8file content the value is not accurate.Here is the live.m3u8
#EXTM3U
#EXT-X-VERSION:3
#EXT-X-TARGETDURATION:2
#EXT-X-MEDIA-SEQUENCE:0
#EXTINF:2.000000,
live0.ts
#EXTINF:2.000000,
live1.ts
#EXTINF:1.200000,
live2.ts
#EXTINF:2.500000,
live3.ts
#EXTINF:2.000000,
live4.ts
#EXTINF:2.600000,
live5.ts
#EXTINF:1.700000,
live6.ts
#EXT-X-ENDLISTAnd when I check the timing information of the ts file
live2.tsusing the command,~/bin/ffprobe -i live2.ts -show_entries format=duration -v quiet -of csv="p=0"I am getting the value
2.136000where as in m3u8 file it is1.20000.I have build the latest FFMPEG based on official guild https://trac.ffmpeg.org/wiki/CompilationGuide/Ubuntu.
OS : Ubuntu 12.04
ffmpeg Version
$~/bin//ffmpeg -version
ffmpeg version N-91369-g4ac88ba Copyright (c) 2000-2018 the FFmpeg developers
built with gcc 4.8 (Ubuntu 4.8.1-2ubuntu1~12.04)
configuration: --prefix=/home/haris/ffmpeg_build --pkg-config-flags=--static --extra-cflags=-I/home/haris/ffmpeg_build/include --extra-ldflags=-L/home/haris/ffmpeg_build/lib --extra-libs='-lpthread -lm' --bindir=/home/haris/bin --enable-gpl --enable-libaom --enable-libass --enable-libfdk-aac --enable-libfreetype --enable-libmp3lame --enable-libopus --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libx265 --enable-nonfree
libavutil 56. 18.102 / 56. 18.102
libavcodec 58. 20.104 / 58. 20.104
libavformat 58. 17.101 / 58. 17.101
libavdevice 58. 4.101 / 58. 4.101
libavfilter 7. 25.100 / 7. 25.100
libswscale 5. 2.100 / 5. 2.100
libswresample 3. 2.100 / 3. 2.100
libpostproc 55. 2.100 / 55. 2.100Note
If I tested the same command in Ubuntu 16.04 where ffmpeg installed with
apt-getevery thing works fine.Here is the ffmpeg details
$ ~/bin/ffmpeg -version
ffmpeg version 2.8.14-0ubuntu0.16.04.1 Copyright (c) 2000-2018 the FFmpeg developers
built with gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.9) 20160609
configuration: --prefix=/usr --extra-version=0ubuntu0.16.04.1 --build-suffix=-ffmpeg --toolchain=hardened --libdir=/usr/lib/x86_64-linux-gnu --incdir=/usr/include/x86_64-linux-gnu --cc=cc --cxx=g++ --enable-gpl --enable-shared --disable-stripping --disable-decoder=libopenjpeg --disable-decoder=libschroedinger --enable-avresample --enable-avisynth --enable-gnutls --enable-ladspa --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libmodplug --enable-libmp3lame --enable-libopenjpeg --enable-libopus --enable-libpulse --enable-librtmp --enable-libschroedinger --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxvid --enable-libzvbi --enable-openal --enable-opengl --enable-x11grab --enable-libdc1394 --enable-libiec61883 --enable-libzmq --enable-frei0r --enable-libx264 --enable-libopencv
libavutil 54. 31.100 / 54. 31.100
libavcodec 56. 60.100 / 56. 60.100
libavformat 56. 40.101 / 56. 40.101
libavdevice 56. 4.100 / 56. 4.100
libavfilter 5. 40.101 / 5. 40.101
libavresample 2. 1. 0 / 2. 1. 0
libswscale 3. 1.101 / 3. 1.101
libswresample 1. 2.101 / 1. 2.101
libpostproc 53. 3.100 / 53. 3.100What could be the cause, any help will be appreciated.
-
ffmpeg hls video recording timing information is inaccurate
28 juin 2018, par HarisI am recording the rtsp stream in HLS format which is working fine with below command.
~/bin/ffmpeg -i rtsp://10.0.7.39:554/media/live/1/1 -c:a aac -c:v copy -hls_list_size 65535 -hls_time 2 live.m3u8But when I check the duration of each
tsfile withlive.m3u8file content the value is not accurate.Here is the live.m3u8
#EXTM3U
#EXT-X-VERSION:3
#EXT-X-TARGETDURATION:2
#EXT-X-MEDIA-SEQUENCE:0
#EXTINF:2.000000,
live0.ts
#EXTINF:2.000000,
live1.ts
#EXTINF:1.200000,
live2.ts
#EXTINF:2.500000,
live3.ts
#EXTINF:2.000000,
live4.ts
#EXTINF:2.600000,
live5.ts
#EXTINF:1.700000,
live6.ts
#EXT-X-ENDLISTAnd when I check the timing information of the ts file
live2.tsusing the command,~/bin/ffprobe -i live2.ts -show_entries format=duration -v quiet -of csv="p=0"I am getting the value
2.136000where as in m3u8 file it is1.20000.I have build the latest FFMPEG based on official guild https://trac.ffmpeg.org/wiki/CompilationGuide/Ubuntu.
OS : Ubuntu 12.04
ffmpeg Version
$~/bin//ffmpeg -version
ffmpeg version N-91369-g4ac88ba Copyright (c) 2000-2018 the FFmpeg developers
built with gcc 4.8 (Ubuntu 4.8.1-2ubuntu1~12.04)
configuration: --prefix=/home/haris/ffmpeg_build --pkg-config-flags=--static --extra-cflags=-I/home/haris/ffmpeg_build/include --extra-ldflags=-L/home/haris/ffmpeg_build/lib --extra-libs='-lpthread -lm' --bindir=/home/haris/bin --enable-gpl --enable-libaom --enable-libass --enable-libfdk-aac --enable-libfreetype --enable-libmp3lame --enable-libopus --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libx265 --enable-nonfree
libavutil 56. 18.102 / 56. 18.102
libavcodec 58. 20.104 / 58. 20.104
libavformat 58. 17.101 / 58. 17.101
libavdevice 58. 4.101 / 58. 4.101
libavfilter 7. 25.100 / 7. 25.100
libswscale 5. 2.100 / 5. 2.100
libswresample 3. 2.100 / 3. 2.100
libpostproc 55. 2.100 / 55. 2.100Note
If I tested the same command in Ubuntu 16.04 where ffmpeg installed with
apt-getevery thing works fine.Here is the ffmpeg details
$ ~/bin/ffmpeg -version
ffmpeg version 2.8.14-0ubuntu0.16.04.1 Copyright (c) 2000-2018 the FFmpeg developers
built with gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.9) 20160609
configuration: --prefix=/usr --extra-version=0ubuntu0.16.04.1 --build-suffix=-ffmpeg --toolchain=hardened --libdir=/usr/lib/x86_64-linux-gnu --incdir=/usr/include/x86_64-linux-gnu --cc=cc --cxx=g++ --enable-gpl --enable-shared --disable-stripping --disable-decoder=libopenjpeg --disable-decoder=libschroedinger --enable-avresample --enable-avisynth --enable-gnutls --enable-ladspa --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libmodplug --enable-libmp3lame --enable-libopenjpeg --enable-libopus --enable-libpulse --enable-librtmp --enable-libschroedinger --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxvid --enable-libzvbi --enable-openal --enable-opengl --enable-x11grab --enable-libdc1394 --enable-libiec61883 --enable-libzmq --enable-frei0r --enable-libx264 --enable-libopencv
libavutil 54. 31.100 / 54. 31.100
libavcodec 56. 60.100 / 56. 60.100
libavformat 56. 40.101 / 56. 40.101
libavdevice 56. 4.100 / 56. 4.100
libavfilter 5. 40.101 / 5. 40.101
libavresample 2. 1. 0 / 2. 1. 0
libswscale 3. 1.101 / 3. 1.101
libswresample 1. 2.101 / 1. 2.101
libpostproc 53. 3.100 / 53. 3.100What could be the cause, any help will be appreciated.
-
How parse and decode H264 file with libav/ffmpeg ?
12 août 2022, par isrepeatAccording to official documentations I try decode my
test.mp4withAV_CODEC_ID_H264.

Of course I can do this with
av_read_frame(), but how do it withav_parser_parse2()?

The problem occurs at
avcodec_send_packet(...)atdecode_nal_units(...)atff_h2645_packet_split(...)[h264dec.c]

extern "C" {
#include <libavcodec></libavcodec>avcodec.h>
#include <libavformat></libavformat>avformat.h>
}

//#define INBUF_SIZE 4096
#define INBUF_SIZE 256000

void decode(AVCodecContext* dec_ctx, AVFrame* frame, AVPacket* pkt, const char* filename);

int main(int argc, char** argv)
{
 const char* filename;
 const AVCodec* codec;
 AVFormatContext* formatCtx = NULL;
 AVCodecParserContext* parser;
 AVCodecContext* c = NULL;
 AVStream* videoStream = NULL;
 FILE* f;
 AVFrame* frame;
 uint8_t inbuf[INBUF_SIZE + AV_INPUT_BUFFER_PADDING_SIZE];
 uint8_t* data;
 size_t data_size;
 int ret;
 AVPacket* pkt;

 filename = "D:\\test.mp4";

 //if (avformat_open_input(&formatCtx, filename, nullptr, nullptr) < 0) {
 // throw std::exception("Could not open source file");
 //}

 //if (avformat_find_stream_info(formatCtx, nullptr) < 0) {
 // throw std::exception("Could not find stream information");
 //}

 //videoStream = formatCtx->streams[0];



 pkt = av_packet_alloc();
 if (!pkt)
 exit(1);

 /* set end of buffer to 0 (this ensures that no overreading happens for damaged MPEG streams) */
 memset(inbuf + INBUF_SIZE, 0, AV_INPUT_BUFFER_PADDING_SIZE);

 /* find the MPEG-1 video decoder */
 //codec = avcodec_find_decoder(AV_CODEC_ID_MPEG1VIDEO);
 codec = avcodec_find_decoder(AV_CODEC_ID_H264);
 if (!codec) {
 fprintf(stderr, "Codec not found\n");
 exit(1);
 }

 parser = av_parser_init(codec->id);
 if (!parser) {
 fprintf(stderr, "parser not found\n");
 exit(1);
 }

 parser->flags = PARSER_FLAG_COMPLETE_FRAMES;

 c = avcodec_alloc_context3(codec);
 if (!c) {
 fprintf(stderr, "Could not allocate video codec context\n");
 exit(1);
 }

 /* For some codecs, such as msmpeg4 and mpeg4, width and height
 MUST be initialized there because this information is not
 available in the bitstream. */

 //avcodec_parameters_to_context(c, videoStream->codecpar);

 /* open it */
 if (avcodec_open2(c, codec, NULL) < 0) {
 fprintf(stderr, "Could not open codec\n");
 exit(1);
 }

 f = fopen(filename, "rb");
 if (!f) {
 fprintf(stderr, "Could not open %s\n", filename);
 exit(1);
 }

 frame = av_frame_alloc();
 if (!frame) {
 fprintf(stderr, "Could not allocate video frame\n");
 exit(1);
 }

 // ---- Use parser to get packets ----
 while (!feof(f)) {
 /* read raw data from the input file */
 data_size = fread(inbuf, 1, INBUF_SIZE, f);
 if (!data_size)
 break;

 /* use the parser to split the data into frames */
 data = inbuf;
 while (data_size > 0) {
 ret = av_parser_parse2(parser, c, &pkt->data, &pkt->size, data, data_size, AV_NOPTS_VALUE, AV_NOPTS_VALUE, 0);
 if (ret < 0) {
 fprintf(stderr, "Error while parsing\n");
 exit(1);
 }
 data += ret;
 data_size -= ret;

 if (pkt->size)
 decode(c, frame, pkt, outfilename);
 }
 }

 // ---- Use FormatContext to get packets ----
 // while (av_read_frame(fmt_ctx, pkt) == 0)
 // {
 // if (pkt->stream_index == AVMEDIA_TYPE_VIDEO) {
 // if (pkt->size > 0)
 // decode(cdc_ctx, frame, pkt, fp_out);
 // }
 // }

 /* flush the decoder */
 decode(c, frame, NULL, outfilename);

 fclose(f);

 av_parser_close(parser);
 avcodec_free_context(&c);
 av_frame_free(&frame);
 av_packet_free(&pkt);

 return 0;
}

void decode(AVCodecContext* dec_ctx, AVFrame* frame, AVPacket* pkt, const char* filename)
{
 char buf[1024];
 int ret;

 ret = avcodec_send_packet(dec_ctx, pkt);
 if (ret < 0) {
 char buff[255]{ 0 };
 std::string strError = av_make_error_string(buff, 255, ret);
 fprintf(stderr, "Error sending a packet for decoding\n");
 exit(1);
 }

 while (ret >= 0) {
 ret = avcodec_receive_frame(dec_ctx, frame);
 if (ret == AVERROR(EAGAIN) || ret == AVERROR_EOF)
 return;
 else if (ret < 0) {
 fprintf(stderr, "Error during decoding\n");
 exit(1);
 }

 printf("saving frame %3d\n", dec_ctx->frame_number);
 fflush(stdout);
 /* the picture is allocated by the decoder. no need to
 free it */
 // handle frame ...
 }
}


Syndiquer tout le site
