Recherche avancée

Médias (17)

Mot : - Tags -/wired

Autres articles (58)

  • Installation en mode ferme

    4 février 2011, par

    Le mode ferme permet d’héberger plusieurs sites de type MediaSPIP en n’installant qu’une seule fois son noyau fonctionnel.
    C’est la méthode que nous utilisons sur cette même plateforme.
    L’utilisation en mode ferme nécessite de connaïtre un peu le mécanisme de SPIP contrairement à la version standalone qui ne nécessite pas réellement de connaissances spécifique puisque l’espace privé habituel de SPIP n’est plus utilisé.
    Dans un premier temps, vous devez avoir installé les mêmes fichiers que l’installation (...)

  • Websites made ​​with MediaSPIP

    2 mai 2011, par

    This page lists some websites based on MediaSPIP.

  • Possibilité de déploiement en ferme

    12 avril 2011, par

    MediaSPIP peut être installé comme une ferme, avec un seul "noyau" hébergé sur un serveur dédié et utilisé par une multitude de sites différents.
    Cela permet, par exemple : de pouvoir partager les frais de mise en œuvre entre plusieurs projets / individus ; de pouvoir déployer rapidement une multitude de sites uniques ; d’éviter d’avoir à mettre l’ensemble des créations dans un fourre-tout numérique comme c’est le cas pour les grandes plate-formes tout public disséminées sur le (...)

Sur d’autres sites (9050)

  • Can build & make video call with pjsip and ffmpeg

    10 mai 2023, par QViet

    I try to build PJSIP with ffmpeg with this config :

    


    i Follow those step :

    


      

    • build need lib and place in thirdparty folder name ffmpeg

      • 


    • setup link lib & header already.

      • 


    • run build with "$configure —with-ffmpeg="

      • 


    • config_site.h add :

      • 


    


    

    #define PJMEDIA_HAS_OPENH264_CODEC 1 
#define PJMEDIA_HAS_VIDEO 1 
#define PJMEDIA_VIDEO_DEV_HAS_FFMPEG 1 
#define PJMEDIA_HAS_FFMPEG_VID_CODEC 1 
#define PJMEDIA_HAS_FFMPEG 1 
#define PJMEDIA_HAS_FFMPEG_CODEC_H264 1 
#define PJMEDIA_HAS_LIBAVDEVICE 1 
#define PJMEDIA_HAS_OPENH264_CODEC 1


    


    


    I see have to enable PJMEDIA_HAS_OPENH264_CODEC , if not, can build success but when import will receive this error :

    


    Undefined symbol: _WelsCreateDecoder


    


    cause miss wels package exits in openh264 lib.

    


    The build with success after all with above config but in this :

    


       pj_status_t status = pjsua_vid_enum_codecs(videoCodecInfo, &videoCodecCount);


    


    the codec info just show 1 codec is "H264/97" -> is OpenH264 codec, i can't see ffmpeg here.
When im start call like normal, see log openh264 init call/ open camera .

    


    What i need step to using ffmpeg, i can see any docs about it

    


    can you help me ?

    


    ** this i log call stack :**

    


    2023-04-24 10:17:21.522976+0700 PSUAKitSample[83000:15642975] 💚 DEBUG   10:17:21.523 [SIPSample -[SIPSample startEndpointWithEndpointConfiguration:error:]:272] Creating new PSUASIP Endpoint instance.
10:17:21.525         os_core_unix.c !pjlib 2.13-dev for POSIX initialized
10:17:21.526         sip_endpoint.c  .Creating endpoint instance...
10:17:21.527                  pjlib  .select() I/O Queue created (0x1050a32c8)
10:17:21.527         sip_endpoint.c  .Module "mod-msg-print" registered
10:17:21.527        sip_transport.c  .Transport manager created.
10:17:21.527           pjsua_core.c  .PJSUA state changed: NULL --> CREATED
2023-04-24 10:17:21.528077+0700 PSUAKitSample[83000:15642817] 10:17:21.528         sip_endpoint.c  .Module "mod-pjsua-log" registered

2023-04-24 10:17:21.528204+0700 PSUAKitSample[83000:15642975] 💚 DEBUG   10:17:21.528 [SIPSample void logCallBack(int, const char *, int):1034]         sip_endpoint.c  .Module "mod-PSUA-log" registered
2023-04-24 10:17:21.529375+0700 PSUAKitSample[83000:15642817] 10:17:21.529         sip_endpoint.c  .Module "mod-tsx-layer" registered

2023-04-24 10:17:21.529477+0700 PSUAKitSample[83000:15642975] 💚 DEBUG   10:17:21.529 [SIPSample void logCallBack(int, const char *, int):1034]         sip_endpoint.c  .Module "mod-tsx-layer" registered
2023-04-24 10:17:21.529491+0700 PSUAKitSample[83000:15642817] 10:17:21.529         sip_endpoint.c  .Module "mod-stateful-util" registered

2023-04-24 10:17:21.529592+0700 PSUAKitSample[83000:15642975] 💚 DEBUG   10:17:21.530 [SIPSample void logCallBack(int, const char *, int):1034]         sip_endpoint.c  .Module "mod-stateful-util" registered
2023-04-24 10:17:21.529895+0700 PSUAKitSample[83000:15642817] 10:17:21.529         sip_endpoint.c  .Module "mod-ua" registered

2023-04-24 10:17:21.530024+0700 PSUAKitSample[83000:15642975] 💚 DEBUG   10:17:21.530 [SIPSample void logCallBack(int, const char *, int):1034]         sip_endpoint.c  .Module "mod-ua" registered
2023-04-24 10:17:21.530068+0700 PSUAKitSample[83000:15642817] 10:17:21.530         sip_endpoint.c  .Module "mod-100rel" registered

2023-04-24 10:17:21.530181+0700 PSUAKitSample[83000:15642817] 10:17:21.530         sip_endpoint.c  .Module "mod-pjsua" registered

2023-04-24 10:17:21.530217+0700 PSUAKitSample[83000:15642975] 💚 DEBUG   10:17:21.530 [SIPSample void logCallBack(int, const char *, int):1034]         sip_endpoint.c  .Module "mod-100rel" registered
2023-04-24 10:17:21.530283+0700 PSUAKitSample[83000:15642975] 💚 DEBUG   10:17:21.530 [SIPSample void logCallBack(int, const char *, int):1034]         sip_endpoint.c  .Module "mod-PSUA" registered
2023-04-24 10:17:21.530865+0700 PSUAKitSample[83000:15642817] 10:17:21.530         sip_endpoint.c  .Module "mod-invite" registered

2023-04-24 10:17:21.530970+0700 PSUAKitSample[83000:15642975] 💚 DEBUG   10:17:21.531 [SIPSample void logCallBack(int, const char *, int):1034]         sip_endpoint.c  .Module "mod-invite" registered
2023-04-24 10:17:21.677206+0700 PSUAKitSample[83000:15642817] 10:17:21.677        coreaudio_dev.c  .. dev_id 0: iPhone IO device  (in=1, out=1) 8000Hz

2023-04-24 10:17:21.677497+0700 PSUAKitSample[83000:15642975] 💚 DEBUG   10:17:21.677 [SIPSample void logCallBack(int, const char *, int):1034]        coreaudio_dev.c  .. dev_id 0: iPhone IO device  (in=1, out=1) 8000Hz
2023-04-24 10:17:21.677588+0700 PSUAKitSample[83000:15642817] 10:17:21.677        coreaudio_dev.c  ..core audio initialized

2023-04-24 10:17:21.677804+0700 PSUAKitSample[83000:15642975] 💚 DEBUG   10:17:21.678 [SIPSample void logCallBack(int, const char *, int):1034]        coreaudio_dev.c  ..core audio initialized
2023-04-24 10:17:21.678538+0700 PSUAKitSample[83000:15642817] 10:17:21.678                  pjlib  ..select() I/O Queue created (0x1060684a8)

2023-04-24 10:17:21.678743+0700 PSUAKitSample[83000:15642975] 💚 DEBUG   10:17:21.679 [SIPSample void logCallBack(int, const char *, int):1034]                  pjlib  ..select() I/O Queue created (0x1060684a8)
2023-04-24 10:17:21.683380+0700 PSUAKitSample[83000:15642817] 10:17:21.683            pjsua_vid.c  ..Initializing video subsystem..

2023-04-24 10:17:21.683585+0700 PSUAKitSample[83000:15642975] 💚 DEBUG   10:17:21.683 [SIPSample void logCallBack(int, const char *, int):1034]            PSUA_vid.c  ..Initializing video subsystem..
2023-04-24 10:17:21.684058+0700 PSUAKitSample[83000:15642817] 10:17:21.684             vid_conf.c  ...Created video conference bridge with 32 ports

2023-04-24 10:17:21.684260+0700 PSUAKitSample[83000:15642975] 💚 DEBUG   10:17:21.684 [SIPSample void logCallBack(int, const char *, int):1034]             vid_conf.c  ...Created video conference bridge with 32 ports
2023-04-24 10:17:21.684983+0700 PSUAKitSample[83000:15642817] 10:17:21.684           openh264.cpp  ...OpenH264 codec initialized

2023-04-24 10:17:21.685168+0700 PSUAKitSample[83000:15642975] 💚 DEBUG   10:17:21.685 [SIPSample void logCallBack(int, const char *, int):1034]           openh264.cpp  ...OpenH264 codec initialized
2023-04-24 10:17:21.685237+0700 PSUAKitSample[83000:15642817] 10:17:21.685           opengl_dev.c  ...OpenGL device initialized

2023-04-24 10:17:21.685370+0700 PSUAKitSample[83000:15642975] 💚 DEBUG   10:17:21.685 [SIPSample void logCallBack(int, const char *, int):1034]           opengl_dev.c  ...OpenGL device initialized
2023-04-24 10:17:21.715616+0700 PSUAKitSample[83000:15642817] 10:17:21.715           darwin_dev.m  ...Darwin video initialized with 5 devices:

2023-04-24 10:17:21.715796+0700 PSUAKitSample[83000:15642975] 💚 DEBUG   10:17:21.716 [SIPSample void logCallBack(int, const char *, int):1034]           darwin_dev.m  ...Darwin video initialized with 5 devices:
2023-04-24 10:17:21.715812+0700 PSUAKitSample[83000:15642817] 10:17:21.715           darwin_dev.m  ... 0: [Renderer] iOS - UIView

2023-04-24 10:17:21.715917+0700 PSUAKitSample[83000:15642975] 💚 DEBUG   10:17:21.716 [SIPSample void logCallBack(int, const char *, int):1034]           darwin_dev.m  ... 0: [Renderer] iOS - UIView
2023-04-24 10:17:21.715921+0700 PSUAKitSample[83000:15642817] 10:17:21.715           darwin_dev.m  ... 1: [Capturer] AVF - Front Camera

2023-04-24 10:17:21.716006+0700 PSUAKitSample[83000:15642975] 💚 DEBUG   10:17:21.716 [SIPSample void logCallBack(int, const char *, int):1034]           darwin_dev.m  ... 1: [Capturer] AVF - Front Camera
2023-04-24 10:17:21.716033+0700 PSUAKitSample[83000:15642817] 10:17:21.716           darwin_dev.m  ... 2: [Capturer] AVF - Back Camera

2023-04-24 10:17:21.716137+0700 PSUAKitSample[83000:15642817] 10:17:21.716           darwin_dev.m  ... 3: [Capturer] AVF - Back Dual Camera

2023-04-24 10:17:21.716152+0700 PSUAKitSample[83000:15642975] 💚 DEBUG   10:17:21.716 [SIPSample void logCallBack(int, const char *, int):1034]           darwin_dev.m  ... 2: [Capturer] AVF - Back Camera
2023-04-24 10:17:21.716218+0700 PSUAKitSample[83000:15642975] 💚 DEBUG   10:17:21.716 [SIPSample void logCallBack(int, const char *, int):1034]           darwin_dev.m  ... 3: [Capturer] AVF - Back Dual Camera
2023-04-24 10:17:21.716247+0700 PSUAKitSample[83000:15642817] 10:17:21.716           darwin_dev.m  ... 4: [Capturer] AVF - Back Telephoto Camera

2023-04-24 10:17:21.716375+0700 PSUAKitSample[83000:15642975] 💚 DEBUG   10:17:21.716 [SIPSample void logCallBack(int, const char *, int):1034]           darwin_dev.m  ... 4: [Capturer] AVF - Back Telephoto Camera
2023-04-24 10:17:21.716409+0700 PSUAKitSample[83000:15642817] 10:17:21.716         colorbar_dev.c  ...Colorbar video src initialized with 2 device(s):

2023-04-24 10:17:21.716673+0700 PSUAKitSample[83000:15642817] 10:17:21.716         colorbar_dev.c  ... 0: Colorbar generator

2023-04-24 10:17:21.716764+0700 PSUAKitSample[83000:15642975] 💚 DEBUG   10:17:21.717 [SIPSample void logCallBack(int, const char *, int):1034]         colorbar_dev.c  ...Colorbar video src initialized with 2 device(s):
2023-04-24 10:17:21.716918+0700 PSUAKitSample[83000:15642817] 10:17:21.716         colorbar_dev.c  ... 1: Colorbar-active

2023-04-24 10:17:21.716938+0700 PSUAKitSample[83000:15642975] 💚 DEBUG   10:17:21.717 [SIPSample void logCallBack(int, const char *, int):1034]         colorbar_dev.c  ... 0: Colorbar generator
2023-04-24 10:17:21.717192+0700 PSUAKitSample[83000:15642975] 💚 DEBUG   10:17:21.717 [SIPSample void logCallBack(int, const char *, int):1034]         colorbar_dev.c  ... 1: Colorbar-active
2023-04-24 10:17:21.717528+0700 PSUAKitSample[83000:15642817] 10:17:21.717         sip_endpoint.c  .Module "mod-evsub" registered

2023-04-24 10:17:21.717645+0700 PSUAKitSample[83000:15642975] 💚 DEBUG   10:17:21.718 [SIPSample void logCallBack(int, const char *, int):1034]         sip_endpoint.c  .Module "mod-evsub" registered
2023-04-24 10:17:21.717710+0700 PSUAKitSample[83000:15642817] 10:17:21.717         sip_endpoint.c  .Module "mod-presence" registered


    


  • Failed setup for format dxva2_vld : hwaccel initialisation returned error

    13 juin 2023, par james

    My program is a video player based on ffmpeg implementation, enabling d3d11va and dxva2 hardware acceleration to decode video frames, play most of the video is normal, only a small part of the video will report this error, ffmpeg printed log as follows :
I:2023-06-13 15:34:53 ms:887:No decoder device for codec found
I:2023-06-13 15:34:53 ms:887:Failed setup for format dxva2_vld : hwaccel initialisation returned error.
I:2023-06-13 15:34:53 ms:888:Format dxva2_vld not usable, retrying get_format() without it.
I:2023-06-13 15:34:53 ms:888:decode_slice_header error
I:2023-06-13 15:34:53 ms:888:no frame !

    


    If ffplay is used and d3d11va and dxva2 hardware acceleration is not enabled, the video can be played normally, and the printed video information is as follows :
PS D :\msys64\home\wangj\ffmpeg-4.4.1\buildout\bin> .\ffplay.exe -i D :\Desktop\13132023061300012_1_C1_34.mp4
ffplay version 4.4.1 Copyright (c) 2003-2021 the FFmpeg developers
configuration : —prefix=./buildout —arch=x86 —toolchain=msvc —enable-shared —disable-debug —enable-sdl2 —enable-dxva2 —enable-d3d11va
libavutil 56. 70.100 / 56. 70.100
libavcodec 58.134.100 / 58.134.100
libavformat 58. 76.100 / 58. 76.100
libavdevice 58. 13.100 / 58. 13.100
libavfilter 7.110.100 / 7.110.100
libswscale 5. 9.100 / 5. 9.100
libswresample 3. 9.100 / 3. 9.100
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'D :\Desktop\13132023061300012_1_C1_34.mp4' :
Metadata :
major_brand : isom
minor_version : 512
compatible_brands : isomiso2avc1mp41
encoder : Lavf56.38.102
Duration : 00:00:44.00, start : 0.000000, bitrate : 1706 kb/s
Stream #0:0(und) : Video : h264 (Baseline) (avc1 / 0x31637661), yuv420p, 1920x1080, 1705 kb/s, 25 fps, 25 tbr, 90k tbn, 50 tbc (default)
Metadata :
handler_name : VideoHandler
vendor_id : [0][0][0][0]

    


    Is this pixel format not supported by d3d11va and dxva2 ? What can I do to get ffplay to play this video file with hardware acceleration ?

    


    When d3d11va and dxva2 hardware acceleration is enabled, most of the videos that can be played also have yuv420p pixel format, why can't this video be played？

    


  • problem in making HLS using ffmpeg problem

    24 juin 2023, par AMZ

    I have a function do run in background and create m3u8 for some videos : (I is running in background and updating some fields in django).

    


    def convert_to_hls(episode):
    # Set the output directory for HLS files
output_dir = os.path.join(settings.MEDIA_ROOT, 'hls')
os.makedirs(output_dir, exist_ok=True)

# Set the input video file path
input_file_path = episode.videoFile.path

# Set the output filename and path for the HLS playlist
# filename = os.path.splitext(os.path.basename(input_file_path))[0]
characters = string.ascii_letters + string.digits
filename = ''.join(random.choice(characters) for _ in range(45))
playlist_path = os.path.join(output_dir, f'{filename}.m3u8')

# Set the output path for the HLS segments
segments_path = os.path.join(output_dir, f'{filename}_%05d.ts')

# Construct the ffmpeg command for HLS conversion
command = [
    'ffmpeg',
    '-i', input_file_path,
    '-c:v', 'libx264',
    '-crf', '23',
    '-preset', 'medium',
    '-c:a', 'aac',
    '-b:a', '128k',
    '-f', 'hls',
    '-hls_time', '10',
    '-hls_list_size', '0',
    '-hls_segment_filename', segments_path,
    playlist_path
]
# Execute the ffmpeg command
subprocess.run(command, check=True)

episode.hls_created = True
episode.hls_url = playlist_path.replace("/home/debian/project","")
episode.save()

return True


    


    this code works well for most of my videos but for some .mp4 files gets :

    


    [Fri Jun 23 17:05:47.511095 2023] [wsgi:error] [pid 19975:tid 140289048565504] Exception in thread Thread-1:
[Fri Jun 23 17:05:47.511198 2023] [wsgi:error] [pid 19975:tid 140289048565504] Traceback (most recent call last):
[Fri Jun 23 17:05:47.511244 2023] [wsgi:error] [pid 19975:tid 140289048565504]   File "/opt/bitnami/python/lib/python3.8/threading.py", line 932, in _bootstrap_inner
[Fri Jun 23 17:05:47.512078 2023] [wsgi:error] [pid 19975:tid 140289048565504]     self.run()
[Fri Jun 23 17:05:47.512124 2023] [wsgi:error] [pid 19975:tid 140289048565504]   File "/opt/bitnami/python/lib/python3.8/threading.py", line 870, in run
[Fri Jun 23 17:05:47.512707 2023] [wsgi:error] [pid 19975:tid 140289048565504]     self._target(*self._args, **self._kwargs)
[Fri Jun 23 17:05:47.512748 2023] [wsgi:error] [pid 19975:tid 140289048565504]   File "/home/debian/project/twapp/views/episode_backgrounds.py", line 41, in convert_to_hls
[Fri Jun 23 17:05:47.512950 2023] [wsgi:error] [pid 19975:tid 140289048565504]     subprocess.run(command, check=True)
[Fri Jun 23 17:05:47.512989 2023] [wsgi:error] [pid 19975:tid 140289048565504]   File "/opt/bitnami/python/lib/python3.8/subprocess.py", line 516, in run
[Fri Jun 23 17:05:47.513500 2023] [wsgi:error] [pid 19975:tid 140289048565504]     raise CalledProcessError(retcode, process.args,
[Fri Jun 23 17:05:47.513657 2023] [wsgi:error] [pid 19975:tid 140289048565504] subprocess.CalledProcessError: Command '['ffmpeg', '-i', '/home/debian/project/media/videos/introduction_to_raster_qBhrnAx.mp4', '-c:v', 'libx264', '-crf', '23', '-preset', 'medium', '-c:a', 'aac', '-b:a', '128k', '-f', 'hls', '-hls_time', '10', '-hls_list_size', '0', '-hls_segment_filename', '/home/debian/project/media/hls/ZN3fsJVEfTDEc8MFb5DrP7Y34JFNLj0hfWnGRZAwFdjuG_%05d.ts', '/home/debian/project/media/hls/ZN3fsJVEfTDEc8MFb5DrP7Y34JFNLj0hfWnGRZAwFdjuG.m3u8']' returned non-zero exit status 1.


    


    Also it does not work for .MOV files.

    


Navigation