Recherche avancée

Sur d’autres sites (6642)

• How to concat videos with FFMPEG without a black frame in the middle

  21 juillet 2020, par david k

  I need to join two videos together programmatically, and FFMPEG seems to be working perfectly except it leaves a single black frame between the two joined videos.

  


  Based on this post, I'm guessing it's because the video and audio streams aren't exactly the same length (not sure why). Since I'm seeing a black flash, I'm guessing that the audio is slightly longer than the video, but I can't figure out how to remedy that. I'm fine losing a tiny piece of the audio at the end of the file.

  


  Can anyone help me "trim" the end of my audio stream so that it matches my video stream ? I need to be able to do this for many files, so I can't just hard-code a value into my command.

  


  I've attempted both of the methods that FFMPEG provides to concat, and both of them have this issue. I'd be fine with either approach, if I can get rid of the black frame.

  


  Transcode :

  


  ffmpeg -i video1.mp4 -i video2.mp4 -filter_complex \
  "[0:v][0:a][1:v][1:a] concat=n=2:v=1:a=1 [outv] [outa]" \
  -map "[outv]" -map "[outa]" output.mp4


  


  Re-wrap :

  


  ffmpeg -f concat -i files.txt -c copy output.mp4


  


  Here is the output of ffmpeg -i video1.mp4 -i video2.mp4 :

  


  ffmpeg version 4.2.2 Copyright (c) 2000-2019 the FFmpeg developers
  built with Apple clang version 11.0.0 (clang-1100.0.33.16)
  configuration: --prefix=/usr/local/Cellar/ffmpeg/4.2.2_1 --enable-shared --enable-pthreads --enable-version3 --enable-avresample --cc=clang --host-cflags='-I/Library/Java/JavaVirtualMachines/adoptopenjdk-13.0.1.jdk/Contents/Home/include -I/Library/Java/JavaVirtualMachines/adoptopenjdk-13.0.1.jdk/Contents/Home/include/darwin -fno-stack-check' --host-ldflags= --enable-ffplay --enable-gnutls --enable-gpl --enable-libaom --enable-libbluray --enable-libmp3lame --enable-libopus --enable-librubberband --enable-libsnappy --enable-libtesseract --enable-libtheora --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxvid --enable-lzma --enable-libfontconfig --enable-libfreetype --enable-frei0r --enable-libass --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-librtmp --enable-libspeex --enable-libsoxr --enable-videotoolbox --disable-libjack --disable-indev=jack
  libavutil      56. 31.100 / 56. 31.100
  libavcodec     58. 54.100 / 58. 54.100
  libavformat    58. 29.100 / 58. 29.100
  libavdevice    58.  8.100 / 58.  8.100
  libavfilter     7. 57.100 /  7. 57.100
  libavresample   4.  0.  0 /  4.  0.  0
  libswscale      5.  5.100 /  5.  5.100
  libswresample   3.  5.100 /  3.  5.100
  libpostproc    55.  5.100 / 55.  5.100
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'video1.mp4':
  Metadata:
    major_brand     : mp42
    minor_version   : 0
    compatible_brands: isommp42
    creation_time   : 2020-07-20T20:43:05.000000Z
  Duration: 00:00:09.88, start: 0.000000, bitrate: 1330 kb/s
    Stream #0:0(und): Audio: aac (LC) (mp4a / 0x6134706D), 32000 Hz, mono, fltp, 53 kb/s (default)
    Metadata:
      creation_time   : 2020-07-20T20:43:05.000000Z
      handler_name    : AAC audio
    Stream #0:1(und): Video: h264 (Baseline) (avc1 / 0x31637661), yuv420p, 1280x720, 1274 kb/s, 25 fps, 25 tbr, 30k tbn, 60k tbc (default)
    Metadata:
      creation_time   : 2020-07-20T20:43:05.000000Z
      handler_name    : H.264/AVC video
      encoder         : AVC Coding
Input #1, mov,mp4,m4a,3gp,3g2,mj2, from 'video2.mp4':
  Metadata:
    major_brand     : mp42
    minor_version   : 0
    compatible_brands: isommp42
    creation_time   : 2020-07-20T20:43:06.000000Z
  Duration: 00:00:11.68, start: 0.000000, bitrate: 1346 kb/s
    Stream #1:0(und): Audio: aac (LC) (mp4a / 0x6134706D), 32000 Hz, mono, fltp, 53 kb/s (default)
    Metadata:
      creation_time   : 2020-07-20T20:43:06.000000Z
      handler_name    : AAC audio
    Stream #1:1(und): Video: h264 (Baseline) (avc1 / 0x31637661), yuv420p, 1280x720, 1289 kb/s, 25 fps, 25 tbr, 30k tbn, 60k tbc (default)
    Metadata:
      creation_time   : 2020-07-20T20:43:06.000000Z
      handler_name    : H.264/AVC video
      encoder         : AVC Coding
At least one output file must be specified


  


• To all Matomo plugin developers : Matomo 4 is coming, make your plugin compatible now

  6 août 2020, par Matomo Core Team — Development

  We’re planning to release the first beta of Matomo 4 in a few weeks. For making it easy for Matomo users to be able to upgrade to this beta, it would be great if as many plugins on the Marketplace as possible would be already updated and compatible with Matomo 4. Then many users would be able to upgrade to the first beta without any issues.

  Presumably, as you put your plugin on our Marketplace, you want people to use it. Making your plugin compatible with Matomo 4 helps ensure that people will be able to find and keep using your plugin. If your plugin is not compatible with Matomo 4, your plugin will be automatically deactivated. We’ll be happy to help you achieve compatibility should there be any issue.

  How do I upgrade my Matomo to Matomo 4 ?

  If you have installed your Matomo development environment through git you can simply checkout the Matomo 4 branch “4.x-dev” by executing these commands :

  • git checkout 4.x-dev 
  • composer install

  Alternatively, you can also download the latest version directly from GitHub as a zip file and run composer install afterwards. 

  How do I upgrade my plugin to Matomo 4 ?

  • We recommend you create a new branch for your plugin that supports Matomo 4. For example a branch named “4.x-dev“. This way you will be able to make changes to your plugin for Matomo 3 and Matomo 4 and release separate versions.
  • Check out our migration guide from Matomo 3 to Matomo 4 and the list of all breaking changes.
  • Release a new version of your plugin in GitHub as usual.

  While there were many breaking changes in Matomo 4, most of our Platform APIs remain unchanged, and almost all changes are for rarely used APIs. Often to make your plugin compatible it will just be a matter of adjusting the “plugin.json” file (as mentioned in the migration guide).

  You can find all developer documentation on our developer zone which has already been updated for Matomo 4.

  How do I know my plugin changes were released successfully ?

  If you have configured an email address within your “plugin.json” file, then you will receive a confirmation or an error email within a few minutes. Alternatively, you can also check out your plugin page on the Marketplace directly. If the plugin release was successful, you will see additional links below the download button showing which versions your plugin is compatible with.

  

  How can I downgrade to Matomo 3 or switch between Matomo 3 and Matomo 4 ?

  To downgrade from Matomo 4 to Matomo 3 :

  • check out the “3.x-dev” branch 
  • run a composer install as usual. 
  • run the SQL statements from this downgrade guide to restore the previous MySQL schema.

  When will the final Matomo 4 release be available ?

  We estimate the final stable Matomo 4.0.0 release will be released in approx. 3 months.

  What’s new in Matomo 4 ?

  We don’t have a summary of the changes available just yet but you can see all closed issues within this release here.

  Any questions or need help ? 

  If you have any questions, or experience any problems during the migration don’t hesitate to get in touch with us. We’ll be happy to help get your plugin compatible and the update published. If you find any undocumented breaking change or find any step during the migration process not clear, please let us know as well.

  Thank you for contributing a plugin to the Marketplace and making Matomo better. We really appreciate your work !

• ffmpeg vaapi hardware acceleration with some videos not working

  15 juillet 2020, par Maisen1886

  I have a problem with transcoding various videos on my Synology NAS. Some videos work, some do not.

  


  ffmpeg command :

  


  sudo /volume1/@appstore/VideoStation/bin/ffmpeg -y -hwaccel vaapi -vaapi_device /dev/dri/renderD128 -i '/path/to/my/video/IMG_8647.MOV' -vf hwupload,scale_vaapi=w=640:h=-1:format=nv12 -c:v h264_vaapi -b:v 2M -movflags +faststart 'path/to/output4.mp4'


  


  After i enter the command above, i get following error output :

  


  ffmpeg version 3.3.7 Copyright (c) 2000-2019 the FFmpeg developers
  built with gcc 4.9.3 (crosstool-NG 1.20.0) 20150311 (prerelease)
  configuration: --prefix=/usr/pkg --incdir='${prefix}/include/ffmpeg' --arch=i686 --target-os=linux --cross-prefix=/usr/local/x86_64-pc-linux-gnu/bin/x86_64-pc-linux-gnu- --enable-cross-compile --enable-optimizations --enable-pic --enable-gpl --enable-version3 --enable-nonfree --enable-encoders --enable-pthreads --disable-muxer=image2 --disable-muxer=image2pipe --disable-swscale-alpha --disable-ffplay --disable-ffserver --disable-doc --disable-devices --disable-bzlib --disable-altivec --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libmp3lame --disable-decoder=amrnb --disable-encoder=zmbv --disable-encoder=dca --disable-decoder=dca --disable-encoder=ac3 --disable-encoder=ac3_fixed --disable-encoder=eac3 --disable-decoder=eac3 --disable-encoder=truehd --disable-decoder=truehd --extra-cflags=-I/usr/local/x86_64-pc-linux-gnu/x86_64-pc-linux-gnu/sys-root/usr/pkg/include --extra-ldflags=-L/usr/local/x86_64-pc-linux-gnu/x86_64-pc-linux-gnu/sys-root/usr/pkg/lib --cc=/usr/local/x86_64-pc-linux-gnu/bin/x86_64-pc-linux-gnu-ccache-gcc --enable-shared --disable-static --enable-yasm --enable-libx264 --enable-vaapi --enable-encoder=h264_vaapi --enable-encoder=libx264
  libavutil      55. 58.100 / 55. 58.100
  libavcodec     57. 89.100 / 57. 89.100
  libavformat    57. 71.100 / 57. 71.100
  libavdevice    57.  6.100 / 57.  6.100
  libavfilter     6. 82.100 /  6. 82.100
  libswscale      4.  6.100 /  4.  6.100
  libswresample   2.  7.100 /  2.  7.100
  libpostproc    54.  5.100 / 54.  5.100
libva info: VA-API version 1.1.0
libva info: va_getDriverName() returns 0
libva info: Trying to open /var/packages/VideoStation/target/lib/libva/dri/i965_drv_video.so
libva info: Found init function __vaDriverInit_1_1
libva info: va_openDriver() returns 0
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from '/volume1/homes/maisen20/Drive/iPhone Medien Neu/2020/06/Videos/2020-06-28_19-25-54_IMG_8647.MOV':
  Metadata:
    major_brand     : qt  
    minor_version   : 0
    compatible_brands: qt  
    creation_time   : 2020-06-28T17:25:54.000000Z
    com.apple.quicktime.location.ISO6709: +47.1156+009.0640+430.715/
    com.apple.quicktime.make: Apple
    com.apple.quicktime.model: iPhone X
    com.apple.quicktime.software: 13.5.1
    com.apple.quicktime.creationdate: 2020-06-28T19:25:54+0200
  Duration: 00:00:25.10, start: 0.000000, bitrate: 50256 kb/s
    Stream #0:0(und): Video: hevc (Main) (hvc1 / 0x31637668), yuv420p(tv, bt709), 3840x2160, 50115 kb/s, 60.01 fps, 60 tbr, 600 tbn, 600 tbc (default)
    Metadata:
      rotate          : 90
      creation_time   : 2020-06-28T17:25:54.000000Z
      handler_name    : Core Media Data Handler
      encoder         : HEVC
    Side data:
      displaymatrix: rotation of -90.00 degrees
    Stream #0:1(und): Audio: aac (LC) (mp4a / 0x6134706D), 44100 Hz, mono, fltp, 98 kb/s (default)
    Metadata:
      creation_time   : 2020-06-28T17:25:54.000000Z
      handler_name    : Core Media Data Handler
    Stream #0:2(und): Data: none (mebx / 0x7862656D), 26 kb/s (default)
    Metadata:
      creation_time   : 2020-06-28T17:25:54.000000Z
      handler_name    : Core Media Data Handler
    Stream #0:3(und): Data: none (mebx / 0x7862656D), 0 kb/s (default)
    Metadata:
      creation_time   : 2020-06-28T17:25:54.000000Z
      handler_name    : Core Media Data Handler
Stream mapping:
  Stream #0:0 -> #0:0 (hevc (native) -> h264 (h264_vaapi))
  Stream #0:1 -> #0:1 (aac (native) -> aac (native))
Press [q] to stop, [?] for help
Impossible to convert between the formats supported by the filter 'graph 0 input from stream 0:0' and the filter 'auto_scaler_0'
Error reinitializing filters!
Failed to inject frame into filter network: Function not implemented
Error while processing the decoded data for stream #0:0


  


  Unfortunately I do not know that much about transcoding videos. Does anyone know what the problem here could be ?

  


  Without hardware support (without -hwaccel_output_format vaapi) it works.

  


  thanks a lot !