Recherche avancée

Sur d’autres sites (5296)

• all : Replace if (ARCH_FOO) checks by #if ARCH_FOO

  12 juin 2022, par Andreas Rheinhardt

  all : Replace if (ARCH_FOO) checks by #if ARCH_FOO
  This is more spec-compliant because it does not rely
  
  on dead-code elimination by the compiler. Especially
  
  MSVC has problems with this, as can be seen in
  
  https://ffmpeg.org/pipermail/ffmpeg-devel/2022-May/296373.html
  
  or
  
  https://ffmpeg.org/pipermail/ffmpeg-devel/2022-May/297022.html
  This commit does not eliminate every instance where we rely
  
  on dead code elimination : It only tackles branching to
  
  the initialization of arch-specific dsp code, not e.g. all
  
  uses of CONFIG_ and HAVE_ checks. But maybe it is already
  
  enough to compile FFmpeg with MSVC with whole-programm-optimizations
  
  enabled (if one does not disable too many components).
  Signed-off-by : Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
  

  • [DH] libavcodec/aacdec_template.c
  • [DH] libavcodec/aacenc.c
  • [DH] libavcodec/aacpsdsp_template.c
  • [DH] libavcodec/aacsbr_template.c
  • [DH] libavcodec/ac3dsp.c
  • [DH] libavcodec/acelp_filters.c
  • [DH] libavcodec/acelp_vectors.c
  • [DH] libavcodec/alacdsp.c
  • [DH] libavcodec/audiodsp.c
  • [DH] libavcodec/blockdsp.c
  • [DH] libavcodec/bswapdsp.c
  • [DH] libavcodec/cavsdsp.c
  • [DH] libavcodec/celp_filters.c
  • [DH] libavcodec/celp_math.c
  • [DH] libavcodec/cfhddsp.c
  • [DH] libavcodec/cfhdencdsp.c
  • [DH] libavcodec/dcadsp.c
  • [DH] libavcodec/dct.c
  • [DH] libavcodec/dirac_dwt.c
  • [DH] libavcodec/diracdsp.c
  • [DH] libavcodec/dnxhdenc.c
  • [DH] libavcodec/exrdsp.c
  • [DH] libavcodec/fdctdsp.c
  • [DH] libavcodec/fft_template.c
  • [DH] libavcodec/flacdsp.c
  • [DH] libavcodec/fmtconvert.c
  • [DH] libavcodec/g722dsp.c
  • [DH] libavcodec/h263dsp.c
  • [DH] libavcodec/h264chroma.c
  • [DH] libavcodec/h264dsp.c
  • [DH] libavcodec/h264pred.c
  • [DH] libavcodec/h264qpel.c
  • [DH] libavcodec/hevcdsp.c
  • [DH] libavcodec/hevcpred.c
  • [DH] libavcodec/hpeldsp.c
  • [DH] libavcodec/huffyuvdsp.c
  • [DH] libavcodec/huffyuvencdsp.c
  • [DH] libavcodec/idctdsp.c
  • [DH] libavcodec/iirfilter.c
  • [DH] libavcodec/jpeg2000dsp.c
  • [DH] libavcodec/lossless_audiodsp.c
  • [DH] libavcodec/lossless_videodsp.c
  • [DH] libavcodec/lossless_videoencdsp.c
  • [DH] libavcodec/lpc.c
  • [DH] libavcodec/mdct15.c
  • [DH] libavcodec/me_cmp.c
  • [DH] libavcodec/mlpdsp.c
  • [DH] libavcodec/mpegaudiodsp.c
  • [DH] libavcodec/mpegvideo.c
  • [DH] libavcodec/mpegvideo_enc.c
  • [DH] libavcodec/mpegvideodsp.c
  • [DH] libavcodec/mpegvideoencdsp.c
  • [DH] libavcodec/opus_pvq.c
  • [DH] libavcodec/opusdsp.c
  • [DH] libavcodec/pixblockdsp.c
  • [DH] libavcodec/pngdsp.c
  • [DH] libavcodec/proresdsp.c
  • [DH] libavcodec/qpeldsp.c
  • [DH] libavcodec/rdft.c
  • [DH] libavcodec/rv34dsp.c
  • [DH] libavcodec/rv40dsp.c
  • [DH] libavcodec/sbcdsp.c
  • [DH] libavcodec/sbrdsp_template.c
  • [DH] libavcodec/snow_dwt.c
  • [DH] libavcodec/svq1enc.c
  • [DH] libavcodec/synth_filter.c
  • [DH] libavcodec/takdsp.c
  • [DH] libavcodec/ttadsp.c
  • [DH] libavcodec/ttaencdsp.c
  • [DH] libavcodec/utvideodsp.c
  • [DH] libavcodec/v210dec_init.h
  • [DH] libavcodec/v210enc_init.h
  • [DH] libavcodec/vc1dsp.c
  • [DH] libavcodec/videodsp.c
  • [DH] libavcodec/vorbisdsp.c
  • [DH] libavcodec/vp3dsp.c
  • [DH] libavcodec/vp56dsp.c
  • [DH] libavcodec/vp8dsp.c
  • [DH] libavcodec/vp9dsp.c
  • [DH] libavcodec/wmv2dsp.c
  • [DH] libavcodec/x86/mdct15_init.c
  • [DH] libavcodec/xvididct.c
  • [DH] libavfilter/af_afirdsp.h
  • [DH] libavfilter/af_anlmdn.c
  • [DH] libavfilter/af_volume.c
  • [DH] libavfilter/avf_showcqt.c
  • [DH] libavfilter/colorspacedsp.c
  • [DH] libavfilter/scene_sad.c
  • [DH] libavfilter/vf_atadenoise.c
  • [DH] libavfilter/vf_blend_init.h
  • [DH] libavfilter/vf_bwdif.c
  • [DH] libavfilter/vf_eq.h
  • [DH] libavfilter/vf_framerate.c
  • [DH] libavfilter/vf_fspp.c
  • [DH] libavfilter/vf_gblur_init.h
  • [DH] libavfilter/vf_gradfun.c
  • [DH] libavfilter/vf_hflip_init.h
  • [DH] libavfilter/vf_hqdn3d.c
  • [DH] libavfilter/vf_idet.c
  • [DH] libavfilter/vf_limiter.c
  • [DH] libavfilter/vf_lut3d.c
  • [DH] libavfilter/vf_maskedclamp.c
  • [DH] libavfilter/vf_maskedmerge.c
  • [DH] libavfilter/vf_nlmeans_init.h
  • [DH] libavfilter/vf_noise.c
  • [DH] libavfilter/vf_overlay.c
  • [DH] libavfilter/vf_pp7.c
  • [DH] libavfilter/vf_psnr.c
  • [DH] libavfilter/vf_pullup.c
  • [DH] libavfilter/vf_removegrain.c
  • [DH] libavfilter/vf_spp.c
  • [DH] libavfilter/vf_ssim.c
  • [DH] libavfilter/vf_stereo3d.c
  • [DH] libavfilter/vf_threshold_init.h
  • [DH] libavfilter/vf_tinterlace.c
  • [DH] libavfilter/vf_transpose.c
  • [DH] libavfilter/vf_v360.c
  • [DH] libavfilter/vf_w3fdif.c
  • [DH] libavfilter/vf_yadif.c
  • [DH] libavutil/cpu.c
  • [DH] libavutil/fixed_dsp.c
  • [DH] libavutil/float_dsp.c
  • [DH] libavutil/lls.c
  • [DH] libswresample/audioconvert.c
  • [DH] libswresample/rematrix.c
  • [DH] libswresample/resample_dsp.c
  • [DH] libswscale/rgb2rgb.c
  • [DH] libswscale/swscale.c
  • [DH] libswscale/swscale_unscaled.c
  • [DH] libswscale/utils.c
  • [DH] libswscale/yuv2rgb.c

• How to send ffmpeg AVPacket through WebRTC (using libdatachannel)

  14 novembre 2022, par mike

  I'm encoding a video frame with the ffmpeg libraries, generating an AVPacket with compressed data.

  


  Thanks to some recent advice here on S/O, I am trying to send that frame over a network using the WebRTC library libdatachannel, specifically by adapting the example here :

  


  https://github.com/paullouisageneau/libdatachannel/tree/master/examples/streamer

  


  I am seeing problems inside h264rtppacketizer.cpp (part of the library, not the example) which are almost certainly to do with how I'm providing the sample data.
(I don't think that this is anything to do with libdatachannel specifically, it will be an issue with what I'm sending)

  


  The example code reads each encoded frame from a file, and populates a sample by setting the content of the file to the contents of the file :

  


  sample = *reinterpret_cast *>(&fileContents);

  


  sample is just a std::vector<byte>;</byte>

  


  I have naively copied the contents of an AVPacket->data pointer into the sample vector :

  


  sample.resize(pkt->size);
memcpy(sample.data(), pkt->data, pkt->size * sizeof(std::byte));    


  


  but the packetizer is falling over when trying to get length values out of that data.
Specifically, in the following code, the first iteration gets a length of 1, but the second, looking up index 5, gives 1119887324. This is way too big for my data, which is only 3526 bytes (the whole frame is a single colour so likely to be small once encoded) :

  


  while (index &lt; message->size()) {&#xA;assert(index &#x2B; 4 &lt; message->size());&#xA;auto lengthPtr = (uint32_t *)(message->data() &#x2B; index);&#xA;uint32_t length = ntohl(*lengthPtr);&#xA;auto naluStartIndex = index &#x2B; 4;&#xA;auto naluEndIndex = naluStartIndex &#x2B; length;&#xA;assert(naluEndIndex &lt;= message->size());    &#xA;        &#xA;auto begin = message->begin() &#x2B; naluStartIndex;&#xA;auto end = message->begin() &#x2B; naluEndIndex;&#xA;nalus->push_back(std::make_shared<nalunit>(begin, end));&#xA;index = naluEndIndex;&#xA;}&#xA;</nalunit>

  


  Here is a dump of

  


  uint32_t length = ntohl(*lengthPtr);


  


  for the first few elements of the message (*lengthPtr in parentheses) :

  


  [2022-03-29 15:12:01.182] [info] index 0: 1  (16777216)
[2022-03-29 15:12:01.183] [info] index 1: 359  (1728118784)
[2022-03-29 15:12:01.184] [info] index 2: 91970  (1114046720)
[2022-03-29 15:12:01.186] [info] index 3: 23544512  (3225577217)
[2022-03-29 15:12:01.186] [info] index 4: 1732427807  (532693607)
[2022-03-29 15:12:01.187] [info] index 5: 1119887324  (3693068354)
[2022-03-29 15:12:01.188] [info] index 6: 3223313413  (98312128)
[2022-03-29 15:12:01.188] [info] index 7: 534512896  (384031)
[2022-03-29 15:12:01.188] [info] index 8: 3691315291  (1526728156)
[2022-03-29 15:12:01.189] [info] index 9: 83909537  (2707095557)
[2022-03-29 15:12:01.189] [info] index 10: 6004992  (10574592)
[2022-03-29 15:12:01.190] [info] index 11: 1537277952  (41307)
[2022-03-29 15:12:01.190] [info] index 12: 2701131779  (50331809)
[2022-03-29 15:12:01.192] [info] index 13: 768  (196608)


  


  (I know I should post a complete sample, I am working on it)

  


  


  • I am fairly sure I am just missing something basic. E.g. am I supposed to do something with the AVPacket side_data, does AVPacket have or miss some header info ?

    


  


  • If I just fwrite the pkt->data for a single frame to disk, I can read the codec information with ffprobe :

    


  


  


  Input #0, h264, from 'encodedOut.h264':
Duration: N/A, bitrate: N/A
Stream #0:0: Video: h264 (Constrained Baseline), yuv420p(progressive), 1280x720, 30 tbr, 1200k tbn


  


  Update : This issue is solved by changing the H264RtpPacketizer separator setting from H264RtpPacketizer::Separator::Length to H264RtpPacketizer::Separator::LongStartSequence, many thanks to author of libdatachannel paullouisageneau (see answer below)

  


  I have issues related to settings for the libx264 encoder, but can happily encode with h264_nvenc and h264_mf

  


• How to suppress `ffmpeg` output logging when using H.265 codec in quiet mode

  5 avril 2022, par user223364

  When I run :-

  


  ffmpeg -v quiet -i "${INPUT}" -c:v libx265 -crf 23 "${OUTPUT}"


  


  I'm still getting output from the command even though the loglevel is set to silent (see the example of the output below)

  


  x265 [info]: HEVC encoder version 3.5+20-17839cc0d
x265 [info]: build info [Mac OS X][clang 11.0.0][64 bit] 8bit+10bit+12bit
x265 [info]: using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX
x265 [info]: Main profile, Level-3 (Main tier)
x265 [info]: Thread pool created using 4 threads
x265 [info]: Slices                              : 1
x265 [info]: frame threads / pool features       : 2 / wpp(9 rows)
x265 [warning]: Source height < 720p; disabling lookahead-slices
x265 [info]: Coding QT: max CU size, min CU size : 64 / 8
x265 [info]: Residual QT: max TU size, max depth : 32 / 1 inter / 1 intra
x265 [info]: ME / range / subpel / merge         : hex / 57 / 2 / 3
x265 [info]: Keyframe min / max / scenecut / bias  : 25 / 250 / 40 / 5.00
x265 [info]: Lookahead / bframes / badapt        : 20 / 4 / 2
x265 [info]: b-pyramid / weightp / weightb       : 1 / 1 / 0
x265 [info]: References / ref-limit  cu / depth  : 3 / off / on
x265 [info]: AQ: mode / str / qg-size / cu-tree  : 2 / 1.0 / 32 / 1
x265 [info]: Rate Control / qCompress            : CRF-23.0 / 0.60
x265 [info]: tools: rd=3 psy-rd=2.00 early-skip rskip mode=1 signhide tmvp
x265 [info]: tools: b-intra strong-intra-smoothing deblock sao


  


  I'm using v5 of ffmpeg

  


  ffmpeg version 5.0-tessus  https://evermeet.cx/ffmpeg/  Copyright (c) 2000-2022 the FFmpeg developers
  built with Apple clang version 11.0.0 (clang-1100.0.33.17)


  


  How do I get ffmpeg to be really quiet ?