Recherche avancée
Autres articles (32)
-
La sauvegarde automatique de canaux SPIP
1er avril 2010, parDans le cadre de la mise en place d’une plateforme ouverte, il est important pour les hébergeurs de pouvoir disposer de sauvegardes assez régulières pour parer à tout problème éventuel.
Pour réaliser cette tâche on se base sur deux plugins SPIP : Saveauto qui permet une sauvegarde régulière de la base de donnée sous la forme d’un dump mysql (utilisable dans phpmyadmin) mes_fichiers_2 qui permet de réaliser une archive au format zip des données importantes du site (les documents, les éléments (...) -
Script d’installation automatique de MediaSPIP
25 avril 2011, parAfin de palier aux difficultés d’installation dues principalement aux dépendances logicielles coté serveur, un script d’installation "tout en un" en bash a été créé afin de faciliter cette étape sur un serveur doté d’une distribution Linux compatible.
Vous devez bénéficier d’un accès SSH à votre serveur et d’un compte "root" afin de l’utiliser, ce qui permettra d’installer les dépendances. Contactez votre hébergeur si vous ne disposez pas de cela.
La documentation de l’utilisation du script d’installation (...) -
Automated installation script of MediaSPIP
25 avril 2011, parTo overcome the difficulties mainly due to the installation of server side software dependencies, an "all-in-one" installation script written in bash was created to facilitate this step on a server with a compatible Linux distribution.
You must have access to your server via SSH and a root account to use it, which will install the dependencies. Contact your provider if you do not have that.
The documentation of the use of this installation script is available here.
The code of this (...)
Sur d’autres sites (5969)
-
ffmpeg output separate channel from an input with multiple channels
16 février 2017, par tiras muturii run this command to be able to stream a udp live stream to a http live stream that is playable using a mobile application that am building.
its just a stream with audio streams only.ffmpeg -i udp ://@localhost:1111 -map 0:a http://localhost:8090/feed1.ffm
Input #0, mpegts, from 'udp://@localhost:1111':
Duration: N/A, start: 54616.264622, bitrate: 768 kb/s
Program 1
Metadata:
service_name : Service 1
service_provider: TLK
Stream #0:0[0x101]: Audio: mp2 ([3][0][0][0] / 0x0003), 48000 Hz, stereo, s16p, 96 kb/s
Program 2
Metadata:
service_name : Service 2
service_provider: TLK
Stream #0:1[0x111]: Audio: mp2 ([3][0][0][0] / 0x0003), 48000 Hz, stereo, s16p, 96 kb/s
Program 3
Metadata:
service_name : Service 3
service_provider: TLK
Stream #0:2[0x121]: Audio: mp2 ([3][0][0][0] / 0x0003), 48000 Hz, stereo, s16p, 96 kb/s
Program 4
Metadata:
service_name : Service 4
service_provider: TLK
Stream #0:3[0x131]: Audio: mp2 ([3][0][0][0] / 0x0003), 48000 Hz, stereo, s16p, 96 kb/s
Program 5
Metadata:
service_name : Service 5
service_provider: TLK
Stream #0:4[0x141]: Audio: mp2 ([3][0][0][0] / 0x0003), 48000 Hz, stereo, s16p, 96 kb/s
Program 6
Metadata:
service_name : Service 6
service_provider: TLK
Stream #0:5[0x151]: Audio: mp2 ([3][0][0][0] / 0x0003), 48000 Hz, stereo, s16p, 96 kb/s
Program 7
Metadata:
service_name : Service 7
service_provider: TLK
Stream #0:6[0x161]: Audio: mp2 ([3][0][0][0] / 0x0003), 48000 Hz, stereo, s16p, 96 kb/s
Program 8
Metadata:
service_name : Service 1
service_provider: TLK
Stream #0:7[0x171]: Audio: mp2 ([3][0][0][0] / 0x0003), 48000 Hz, stereo, s16p, 96 kb/si get this output
Stream mapping:
Stream #0:0 -> #0:0 (mp2 (native) -> mp2 (native))
Stream #0:0 -> #0:1 (mp2 (native) -> mp2 (native))
Press [q] to stop, [?] for help
size= 100kB time=00:00:07.19 bitrate= 113.8kbits/s speed=3.01x
video:0kB audio:84kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 18.358242%i really want a way i can be able to map every input stream to have an output stream that can be accessed separately from the other like maybe if i need the first stream maybe i will just
ffplay http://localhost:8090/feed1.ffmand if i need the 7th stream i will just
ffplay http://localhost:8090/feed7.ffmPlease can someone help me crack this issue. FFmpeg dont have complex examples for my current situation.
this is my header information
ubuntu@ip-localhost:~$ \
ffmpeg -i udp://@localhost:4000 \
-map 0:a:0 http://localhost:8090/feed1.ffm
-map 0:a:1 http://localhost:8090/feed2.ffm
-map 0:a:2 http://localhost:8090/feed3.ffm
-map 0:a:3 http://localhost:8090/feed4.ffm
-map 0:a:4 http://localhost:8090/feed5.ffm
-map 0:a:5 http://localhost:8090/feed6.ffm
-map 0:a:6 http://localhost:8090/feed7.ffm
-map 0:a:7 http://localhost:8090/feed8.ffmffmpeg version 3.2.4-1 16.04.york0 Copyright (c) 2000-2017 the FFmpeg developers built with gcc 5.4.1 (Ubuntu 5.4.1-5ubuntu2 16.04.york1) 20170210
configuration : —prefix=/usr —extra-version=’1 16.04.york0’ — toolchain=hardened —libdir=/usr/lib/x86_64-linux-gnu —incdir=/usr/include/x86_64-linux-gnu —enable-gpl —disable-stripping —enable-avresample —enable-avisynth —enable-gnutls —enable-ladspa —enable-libass —enable-libbluray —enable-libbs2b —enable-libcaca —enable-libcdio —enable-libebur128 —enable-libflite —enable-libfontconfig —enable-libfreetype —enable-libfribidi —enable-libgme —enable-libgsm —enable-libmp3lame —enable-libopenjpeg —enable-libopenmpt —enable-libopus —enable-libpulse —enable-librubberband —enable-libshine —enable-libsnappy —enable-libsoxr —enable-libspeex —enable-libssh —enable-libtheora —enable-libtwolame —enable-libvorbis —enable-libvpx —enable-libwavpack —enable-libwebp —enable-libx265 —enable-libxvid —enable-libzmq —enable-libzvbi —enable-omx —enable-openal —enable-opengl —enable-sdl2 —enable-libdc1394 —enable-libiec61883 —enable-chromaprint —enable-frei0r —enable-libopencv —enable-libx264 —enable-shared
libavutil 55. 34.101 / 55. 34.101
libavcodec 57. 64.101 / 57. 64.101
libavformat 57. 56.101 / 57. 56.101
libavdevice 57. 1.100 / 57. 1.100
libavfilter 6. 65.100 / 6. 65.100
libavresample 3. 1. 0 / 3. 1. 0
libswscale 4. 2.100 / 4. 2.100
libswresample 2. 3.100 / 2. 3.100
libpostproc 54. 1.100 / 54. 1.100Input #0, mpegts, from 'udp://@localhost:1111':
Duration: N/A, start: 60047.944622, bitrate: 768 kb/s
Program 1
Metadata:
service_name : Service 1
service_provider: TKL
Stream #0:0[0x101]: Audio: mp2 ([3][0][0][0] / 0x0003), 48000 Hz, stereo, s16p, 96 kb/s
Program 2
Metadata:
service_name : Service 2
service_provider: TKL
Stream #0:1[0x111]: Audio: mp2 ([3][0][0][0] / 0x0003), 48000 Hz, stereo, s16p, 96 kb/s
Program 3
Metadata:
service_name : Service 3
service_provider: TKL
Stream #0:2[0x121]: Audio: mp2 ([3][0][0][0] / 0x0003), 48000 Hz, stereo, s16p, 96 kb/s
Program 4
Metadata:
service_name : Service 4
service_provider: TKL
Stream #0:3[0x131]: Audio: mp2 ([3][0][0][0] / 0x0003), 48000 Hz, stereo, s16p, 96 kb/s
Program 5
Metadata:
service_name : Service 5
service_provider: TKL
Stream #0:4[0x141]: Audio: mp2 ([3][0][0][0] / 0x0003), 48000 Hz, stereo, s16p, 96 kb/s
Program 6
Metadata:
service_name : Service 6
service_provider: TKL
Stream #0:5[0x151]: Audio: mp2 ([3][0][0][0] / 0x0003), 48000 Hz, stereo, s16p, 96 kb/s
Program 7
Metadata:
service_name : Service 7
service_provider: TKL
Stream #0:6[0x161]: Audio: mp2 ([3][0][0][0] / 0x0003), 48000 Hz, stereo, s16p, 96 kb/s
Program 8
Metadata:
service_name : Service 8
service_provider: TKL
Stream #0:7[0x171]: Audio: mp2 ([3][0][0][0] / 0x0003), 48000 Hz, stereo, s16p, 96 kb/s
Output #0, ffm, to 'http://localhost:8090/feed1.ffm':
Metadata:
creation_time : now
encoder : Lavf57.56.101
Stream #0:0: Audio: mp2, 44100 Hz, mono, s16, 32 kb/s
Metadata:
encoder : Lavc57.64.101 mp2
Stream #0:1: Audio: mp2, 44100 Hz, stereo, s16, 64 kb/s
Metadata:
encoder : Lavc57.64.101 mp2
Output #1, ffm, to 'http://localhost:8090/feed2.ffm':
Metadata:
creation_time : now
encoder : Lavf57.56.101
Stream #1:0: Audio: mp2, 44100 Hz, stereo, s16, 64 kb/s
Metadata:
encoder : Lavc57.64.101 mp2
Output #2, ffm, to 'http://localhost:8090/feed3.ffm':
Metadata:
creation_time : now
encoder : Lavf57.56.101
Stream #2:0: Audio: mp2, 44100 Hz, stereo, s16, 64 kb/s
Metadata:
encoder : Lavc57.64.101 mp2
Output #3, ffm, to 'http://localhost:8090/feed4.ffm':
Metadata:
creation_time : now
encoder : Lavf57.56.101
Stream #3:0: Audio: mp2, 44100 Hz, stereo, s16, 64 kb/s
Metadata:
encoder : Lavc57.64.101 mp2
Output #4, ffm, to 'http://localhost:8090/feed5.ffm':
Metadata:
creation_time : now
encoder : Lavf57.56.101
Stream #4:0: Audio: mp2, 44100 Hz, stereo, s16, 64 kb/s
Metadata:
encoder : Lavc57.64.101 mp2
Output #5, ffm, to 'http://localhost:8090/feed6.ffm':
Metadata:
creation_time : now
encoder : Lavf57.56.101
Stream #5:0: Audio: mp2, 44100 Hz, stereo, s16, 64 kb/s
Metadata:
encoder : Lavc57.64.101 mp2
Output #6, ffm, to 'http://localhost:8090/feed7.ffm':
Metadata:
creation_time : now
encoder : Lavf57.56.101
Stream #6:0: Audio: mp2, 44100 Hz, stereo, s16, 64 kb/s
Metadata:
encoder : Lavc57.64.101 mp2
Output #7, ffm, to 'http://localhost:8090/feed8.ffm':
Metadata:
creation_time : now
encoder : Lavf57.56.101
Stream #7:0: Audio: mp2, 44100 Hz, stereo, s16, 64 kb/s
Metadata:
encoder : Lavc57.64.101 mp2
Stream mapping:
Stream #0:0 -> #0:0 (mp2 (native) -> mp2 (native))
Stream #0:0 -> #0:1 (mp2 (native) -> mp2 (native))
Stream #0:0 -> #1:0 (mp2 (native) -> mp2 (native))
Stream #0:0 -> #2:0 (mp2 (native) -> mp2 (native))
Stream #0:0 -> #3:0 (mp2 (native) -> mp2 (native))
Stream #0:0 -> #4:0 (mp2 (native) -> mp2 (native))
Stream #0:0 -> #5:0 (mp2 (native) -> mp2 (native))
Stream #0:0 -> #6:0 (mp2 (native) -> mp2 (native))
Stream #0:0 -> #7:0 (mp2 (native) -> mp2 (native))
Press [q] to stop, [?] for helpthats my full console.
-
Demultiplex UDP live stream to multiple single live stream outputs using FFMPEG & FFSERVE
17 février 2017, par tiras muturii have a problem with ffmpeg. i have an input live stream that has 8 inputs and i want to use ffmpeg to convert it from udp live steram to tcp livestream and then extract each of the 8 input stream differently.
i have been reading about the ffmpeg documentation at they havent provided a clear way of solving my problem.
am running
ffmpeg version 3.2.4-1~16.04.york0 Copyright (c) 2000-2017 the FFmpeg developers built with gcc 5.4.1 (Ubuntu 5.4.1-5ubuntu2~16.04.york1) 20170210 configuration: --prefix=/usr --extra-version='1~16.04.york0' --toolchain=hardened --libdir=/usr/lib/x86_64-linux-gnu --incdir=/usr/include/x86_64-linux-gnu --enable-gpl --disable-stripping --enable-avresample --enable-avisynth --enable-gnutls --enable-ladspa --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libebur128 --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libmp3lame --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-omx --enable-openal --enable-opengl --enable-sdl2 --enable-libdc1394 --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libopencv --enable-libx264 --enable-shared libavutil 55. 34.101 / 55. 34.101 libavcodec 57. 64.101 / 57. 64.101 libavformat 57. 56.101 / 57. 56.101 libavdevice 57. 1.100 / 57. 1.100 libavfilter 6. 65.100 / 6. 65.100 libavresample 3. 1. 0 / 3. 1. 0 libswscale 4. 2.100 / 4. 2.100 libswresample 2. 3.100 / 2. 3.100 libpostproc 54. 1.100 / 54. 1.100am running this command to help me split my input into multiple output that can be accessed differently.
ffmpeg \
-i udp://@localhost:4000 -loglevel debug \
-map 0:0 http://localhost:8090/feed1.ffm \
-map 0:1 http://localhost:8090/feed2.ffm \
-map 0:2 http://localhost:8090/feed3.ffm \
-map 0:3 http://localhost:8090/feed4.ffm \
-map 0:4 http://localhost:8090/feed5.ffm \
-map 0:5 http://localhost:8090/feed6.ffm \
-map 0:6 http://localhost:8090/feed7.ffm \
-map 0:7 http://localhost:8090/feed8.ffmthis is my full output
ubuntu@ip-172-31-40-57:~$ ffmpeg -i udp://@localhost:4000 -map 0:0 http://localhost:8090/feed1.ffm -map 0:1 http://localhost:8090/feed2.ffm -map 0:2 http://localhost:8090/feed3.ffm -map 0:3 http://localhost:8090/feed4.ffm -map 0:4 http://localhost:8090/feed5.ffm -map 0:5 http://localhost:8090/feed6.ffm -map 0:6 http://localhost:8090/feed7.ffm -map 0:7 http://localhost:8090/feed8.ffm
ffmpeg version 3.2.4-1~16.04.york0 Copyright (c) 2000-2017 the FFmpeg developers built with gcc 5.4.1 (Ubuntu 5.4.1-5ubuntu2~16.04.york1) 20170210 configuration: --prefix=/usr --extra-version='1~16.04.york0' --toolchain=hardened --libdir=/usr/lib/x86_64-linux-gnu --incdir=/usr/include/x86_64-linux-gnu --enable-gpl --disable-stripping --enable-avresample --enable-avisynth --enable-gnutls --enable-ladspa --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libebur128 --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libmp3lame --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-omx --enable-openal --enable-opengl --enable-sdl2 --enable-libdc1394 --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libopencv --enable-libx264 --enable-shared libavutil 55. 34.101 / 55. 34.101 libavcodec 57. 64.101 / 57. 64.101 libavformat 57. 56.101 / 57. 56.101 libavdevice 57. 1.100 / 57. 1.100 libavfilter 6. 65.100 / 6. 65.100 libavresample 3. 1. 0 / 3. 1. 0 libswscale 4. 2.100 / 4. 2.100 libswresample 2. 3.100 / 2. 3.100 libpostproc 54. 1.100 / 54. 1.100
Input #0, mpegts, from 'udp://@localhost:4000':
Duration: N/A, start: 14580.980000, bitrate: 768 kb/s
Program 1
Metadata:
service_name : STREAM1
service_provider: RAL
Stream #0:0[0x101]: Audio: mp2 ([3][0][0][0] / 0x0003), 48000 Hz, stereo, s16p, 96 kb/s
Program 2
Metadata:
service_name : STREAM2
service_provider: RAL
Stream #0:1[0x111]: Audio: mp2 ([3][0][0][0] / 0x0003), 48000 Hz, stereo, s16p, 96 kb/s
Program 3
Metadata:
service_name : STREAM3
service_provider: RAL
Stream #0:2[0x121]: Audio: mp2 ([3][0][0][0] / 0x0003), 48000 Hz, stereo, s16p, 96 kb/s
Program 4
Metadata:
service_name : STREAM4
service_provider: RAL
Stream #0:3[0x131]: Audio: mp2 ([3][0][0][0] / 0x0003), 48000 Hz, stereo, s16p, 96 kb/s
Program 5
Metadata:
service_name : STREAM5
service_provider: RAL
Stream #0:4[0x141]: Audio: mp2 ([3][0][0][0] / 0x0003), 48000 Hz, stereo, s16p, 96 kb/s
Program 6
Metadata:
service_name : STREAM6
service_provider: RAL
Stream #0:5[0x151]: Audio: mp2 ([3][0][0][0] / 0x0003), 48000 Hz, stereo, s16p, 96 kb/s
Program 7
Metadata:
service_name : STREAM7
service_provider: RAL
Stream #0:6[0x161]: Audio: mp2 ([3][0][0][0] / 0x0003), 48000 Hz, stereo, s16p, 96 kb/s
Program 8
Metadata:
service_name : STREAM8
service_provider: RAL
Stream #0:7[0x171]: Audio: mp2 ([3][0][0][0] / 0x0003), 48000 Hz, stereo, s16p, 96 kb/s
Output #0, ffm, to 'http://localhost:8090/feed1.ffm':
Metadata:
creation_time : now
encoder : Lavf57.56.101
Stream #0:0: Audio: mp2, 44100 Hz, stereo, s16, 64 kb/s
Metadata:
encoder : Lavc57.64.101 mp2
Output #1, ffm, to 'http://localhost:8090/feed2.ffm':
Metadata:
creation_time : now
encoder : Lavf57.56.101
Stream #1:0: Audio: mp2, 44100 Hz, stereo, s16, 64 kb/s
Metadata:
encoder : Lavc57.64.101 mp2
Output #2, ffm, to 'http://localhost:8090/feed3.ffm':
Metadata:
creation_time : now
encoder : Lavf57.56.101
Stream #2:0: Audio: mp2, 44100 Hz, stereo, s16, 64 kb/s
Metadata:
encoder : Lavc57.64.101 mp2
Output #3, ffm, to 'http://localhost:8090/feed4.ffm':
Metadata:
creation_time : now
encoder : Lavf57.56.101
Stream #3:0: Audio: mp2, 44100 Hz, stereo, s16, 64 kb/s
Metadata:
encoder : Lavc57.64.101 mp2
Output #4, ffm, to 'http://localhost:8090/feed5.ffm':
Metadata:
creation_time : now
encoder : Lavf57.56.101
Stream #4:0: Audio: mp2, 44100 Hz, stereo, s16, 64 kb/s
Metadata:
encoder : Lavc57.64.101 mp2
Output #5, ffm, to 'http://localhost:8090/feed6.ffm':
Metadata:
creation_time : now
encoder : Lavf57.56.101
Stream #5:0: Audio: mp2, 44100 Hz, stereo, s16, 64 kb/s
Metadata:
encoder : Lavc57.64.101 mp2
Output #6, ffm, to 'http://localhost:8090/feed7.ffm':
Metadata:
creation_time : now
encoder : Lavf57.56.101
Stream #6:0: Audio: mp2, 44100 Hz, stereo, s16, 64 kb/s
Metadata:
encoder : Lavc57.64.101 mp2
Output #7, ffm, to 'http://localhost:8090/feed8.ffm':
Metadata:
creation_time : now
encoder : Lavf57.56.101
Stream #7:0: Audio: mp2, 44100 Hz, stereo, s16, 64 kb/s
Metadata:
encoder : Lavc57.64.101 mp2
Stream mapping:
Stream #0:0 -> #0:0 (mp2 (native) -> mp2 (native))
Stream #0:0 -> #1:0 (mp2 (native) -> mp2 (native))
Stream #0:0 -> #2:0 (mp2 (native) -> mp2 (native))
Stream #0:0 -> #3:0 (mp2 (native) -> mp2 (native))
Stream #0:0 -> #4:0 (mp2 (native) -> mp2 (native))
Stream #0:0 -> #5:0 (mp2 (native) -> mp2 (native))
Stream #0:0 -> #6:0 (mp2 (native) -> mp2 (native))
Stream #0:0 -> #7:0 (mp2 (native) -> mp2 (native))
Press [q] to stop, [?] for help
size= 72kB time=00:00:07.66 bitrate= 76.9kbits/s speed=2.68x
video:0kB audio:480kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: unknown
Exiting normally, received signal 2.these are my live feeds.
<feed>
File /tmp/feed2.ffm
FileMaxSize 64M
ACL allow 127.0.0.1
</feed>
<feed>
File /tmp/feed3.ffm
FileMaxSize 64M
ACL allow 127.0.0.1
</feed>
<feed>
File /tmp/feed4.ffm
FileMaxSize 64M
ACL allow 127.0.0.1
</feed>these are my stream
MP3 audio
<stream>
Feed feed1.ffm
Format mp2
#AudioCodec mp3
AudioBitRate 64
AudioChannels 2
AudioSampleRate 44100
NoVideo
</stream>
<stream>
Feed feed2.ffm
Format mp2
#AudioCodec mp3
AudioBitRate 64
AudioChannels 2
AudioSampleRate 44100
NoVideo
</stream>
<stream>
Feed feed3.ffm
Format mp2
#AudioCodec mp3
AudioBitRate 64
AudioChannels 2
AudioSampleRate 44100
NoVideo
</stream> -
WebM live streaming via DASH
23 février 2017, par ewackI am following the instructions here to try to make WebM live streaming via DASH. My input is from an Axis camera and it is streaming as h264 encoding. I am using node to spin up the ffmpeg processes. I am able to create the .hdr file and the .chk files. The .mpd file is even created but it’s empty and I get an error saying :
Could not write header for output file #0 (incorrect codec parameters ?): Operation not permittedStream mapping: Stream #0:0 -> #0:0 (copy)Here’s all of my code :
var express = require('express');
spawn = require('child_process').spawn;
var app = express();
app.use(express.static(__dirname + '/public'));
app.listen(8080);
console.log("Running on Port 8080");
var ffmpeg1 = spawn('ffmpeg', [
'-y',
//video
'-i', 'rtsp://admin:password@192.168.1.54:554/axis-media/media.amp?videocodec=h264&resolution=1280x720',
'-map', '0:0',
'-pix_fmt', 'yuv420p',
'-color_range', '2',
'-c:v', 'libvpx-vp9',
'-s', '1280x720',
'-keyint_min', '25',
'-g', '25',
// //VP9_LIVE_PARAMS
'-speed', '6',
'-tile-columns', '4',
'-frame-parallel', '1',
'-threads', '8',
'-static-thresh', '0',
'-max-intra-rate', '300',
'-deadline', 'realtime',
'-lag-in-frames', '0',
'-error-resilient', '1',
'-f', 'webm_chunk',
'-header', 'public/glass_360.hdr',
'-chunk_start_index', '1',
'public/glass_360_%d.chk',
]);
setTimeout(()=> {
var ffmpeg2 = spawn('ffmpeg', [
'-y',
'-f', 'webm_dash_manifest',
'-live', '1',
'-i', 'public/glass_360.hdr',
'-c', 'copy',
'-map', '0',
'-r', '25',
'-framerate', '25',
'-f', 'webm_dash_manifest',
'-live', '1',
'-adaptation_sets', '"id=0,streams=0"',
'-chunk_start_index', '1',
'-chunk_duration_ms', '2000',
'-time_shift_buffer_depth', '7200',
'-minimum_update_period', '7200',
'public/glass_live_manifest.mpd'
]);
ffmpeg2.stdout.on('data',
function (data) {
console.log('ff2std: ' + data);
}
);
ffmpeg2.stderr.on('data',
function (data) {
console.log('ff2err: ' + data);
}
);
}, 5000);
ffmpeg1.stdout.on('data',
function (data) {
console.log('ff1std: ' + data);
}
);
ffmpeg1.stderr.on('data',
function (data) {
console.log('ff1err: ' + data);
}
);Here is all of my output :
Running on Port 8080
ff1err: ffmpeg version 3.2.4 Copyright (c) 2000-2017 the FFmpeg developers
built with Apple LLVM version 6.0 (clang-600.0.57) (based on LLVM 3.5svn)
configuration: --prefix=/usr/local/Cellar/ffmpeg/3.2.4 --enable-shared --enable-pthreads --enable-gpl --enable-version3 --enable-hardcoded-tables --enable-avresample --cc=clang --host-cflags= --host-ldflags= --enable-ffplay --enable-frei0r --enable-libass --enable-libfdk-aac --enable-libfreetype --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopus --enable-librtmp --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libxvid --enable-opencl --disable-lzma --enable-libopenjpeg --disable-decoder=jpeg2000 --extra-cflags=-I/usr/local/Cellar/openjpeg/2.1.2/include/openjpeg-2.1 --enable-nonfree --enable-vda
ff1err: libavutil 55. 34.101 / 55. 34.101
libavcodec 57. 64.101 / 57. 64.101
libavformat 57. 56.101 / 57. 56.101
libavdevice 57. 1.100 / 57. 1.100
libavfilter 6. 65.100 / 6. 65.100
libavresample 3. 1. 0 / 3. 1. 0
libswscale 4. 2.100 / 4. 2.100
libswresample 2. 3.100 / 2. 3.100
libpostproc 54. 1.100 / 54. 1.100
ff1err: Input #0, rtsp, from 'rtsp://admin:password@192.168.1.54:554/axis-media/media.amp?videocodec=h264&resolution=1280x720':
Metadata:
title : Session streamed with GStreamer
comment : rtsp-server
Duration: N/A, start: 0.033344
ff1err: , bitrate: N/A
Stream #0:0: Video: h264 (Main), yuvj420p(pc, bt709, progressive), 1280x720 [SAR 1:1 DAR 16:9], 30 fps, 30 tbr, 90k tbn, 180k tbc
ff1err: [swscaler @ 0x7f8df281bc00] deprecated pixel format used, make sure you did set range correctly
ff1err: [libvpx-vp9 @ 0x7f8df2800600] v1.6.1
ff1err: Output #0, webm_chunk, to 'public/glass_360_%d.chk':
Metadata:
title : Session streamed with GStreamer
comment : rtsp-server
encoder : Lavf57.56.101
ff1err: Stream #0:0: Video: vp9 (libvpx-vp9), yuv420p(pc), 1280x720 [SAR 1:1 DAR 16:9], q=-1--1, 200 kb/s, 25 fps, 1k tbn, 25 tbc
Metadata:
encoder : Lavc57.64.101 libvpx-vp9
Side data:
cpb: bitrate max/min/avg: 0/0/0 buffer size: 0 vbv_delay: -1
Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> vp9 (libvpx-vp9))
Press [q] to stop, [?] for help
ff1err: frame= 10 fps=0.0 q=0.0 size=N/A time=00:00:00.36 bitrate=N/A speed=0.71x
ff1err: frame= 25 fps= 25 q=0.0 size=N/A time=00:00:00.96 bitrate=N/A speed=0.946x
ff1err: frame= 40 fps= 26 q=0.0 size=N/A time=00:00:01.56 bitrate=N/A speed=1.03x
ff1err: frame= 55 fps= 27 q=0.0 size=N/A time=00:00:02.16 bitrate=N/A speed=1.07x
ff1err: frame= 70 fps= 28 q=0.0 size=N/A time=00:00:02.76 bitrate=N/A speed=1.09x
ff1err: frame= 85 fps= 28 q=0.0 size=N/A time=00:00:03.36 bitrate=N/A speed=1.11x
ff2err: ffmpeg version 3.2.4 Copyright (c) 2000-2017 the FFmpeg developers
built with Apple LLVM version 6.0 (clang-600.0.57) (based on LLVM 3.5svn)
configuration: --prefix=/usr/local/Cellar/ffmpeg/3.2.4 --enable-shared --enable-pthreads --enable-gpl --enable-version3 --enable-hardcoded-tables --enable-avresample --cc=clang --host-cflags= --host-ldflags= --enable-ffplay --enable-frei0r --enable-libass --enable-libfdk-aac --enable-libfreetype --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopus --enable-librtmp --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libxvid --enable-opencl --disable-lzma --enable-libopenjpeg --disable-decoder=jpeg2000 --extra-cflags=-I/usr/local/Cellar/openjpeg/2.1.2/include/openjpeg-2.1 --enable-nonfree --enable-vda
ff2err: libavutil 55. 34.101 / 55. 34.101
libavcodec 57. 64.101 / 57. 64.101
libavformat 57. 56.101 / 57. 56.101
libavdevice 57. 1.100 / 57. 1.100
libavfilter 6. 65.100 / 6. 65.100
libavresample 3. 1. 0 / 3. 1. 0
libswscale 4. 2.100 / 4. 2.100
libswresample 2. 3.100 / 2. 3.100
libpostproc 54. 1.100 / 54. 1.100
ff2err: [webm_dash_manifest @ 0x7fbc5b80b400] Could not find codec parameters for stream 0 (Video: vp9, none, 1280x720): unspecified pixel format
Consider increasing the value for the 'analyzeduration' and 'probesize' options
ff2err: Input #0, webm_dash_manifest, from 'public/glass_360.hdr':
Metadata:
title : Session streamed with GStreamer
encoder : Lavf57.56.101
Duration: N/A, bitrate: N/A
Stream #0:0: Video: vp9, none, 1280x720
ff2err: , SAR 1:1 DAR 16:9, 25 fps, 25 tbr, 1k tbn, 1k tbc (default)
Metadata:
webm_dash_manifest_file_name: glass_360.hdr
webm_dash_manifest_track_number: 1
ff2err: Could not write header for output file #0 (incorrect codec parameters ?): Operation not permittedStream mapping:
Stream #0:0 -> #0:0 (copy)
ff2err: Last message repeated 1 times
ff1err: frame= 101 fps= 29 q=0.0 size=N/A time=00:00:04.00 bitrate=N/A speed=1.13x
ff1err: frame= 116 fps= 29 q=0.0 size=N/A time=00:00:04.60 bitrate=N/A speed=1.14x
ff1err: frame= 131 fps= 29 q=0.0 size=N/A time=00:00:05.20 bitrate=N/A speed=1.15x
ff1err: frame= 146 fps= 29 q=0.0 size=N/A time=00:00:05.80 bitrate=N/A speed=1.15x
ff1err: frame= 161 fps= 29 q=0.0 size=N/A time=00:00:06.40 bitrate=N/A speed=1.15x
ff1err: frame= 177 fps= 29 q=0.0 size=N/A time=00:00:07.04 bitrate=N/A speed=1.16x
ff1err: frame= 192 fps= 29 q=0.0 size=N/A time=00:00:07.64 bitrate=N/A speed=1.16x
ff1err: frame= 207 fps= 29 q=0.0 size=N/A time=00:00:08.24 bitrate=N/A speed=1.16x
ff1err: frame= 222 fps= 29 q=0.0 size=N/A time=00:00:08.84 bitrate=N/A speed=1.17x
ff1err: frame= 237 fps= 29 q=0.0 size=N/A time=00:00:09.44 bitrate=N/A speed=1.17x
ff1err: frame= 252 fps= 29 q=0.0 size=N/A time=00:00:10.04 bitrate=N/A speed=1.17xWhy is ffmpeg creating an empty .mpd file ?
Syndiquer tout le site
