Recherche avancée

Sur d’autres sites (5317)

• Invalid data found in the last hls segment after transcoding

  28 février 2024, par GalaDOS

  When I use ffmpeg to transcode some pure audio flv files to hls segments, the last .ts segment contains some decoding errors. It seems that it happens when the last segment's duration is short enough (about 1.5 second).

  



  Here is my transcode command :

  



  ffmpeg -i 111.flv -c:a aac -b:a 128k -f hls -hls_time 10.00 -hls_list_size 9999 tmp.m3u8


  



  And output :

  



  ffmpeg version n4.0.1-5-gb5106c5 Copyright (c) 2000-2018 the FFmpeg developers
  built with gcc 4.8.5 (GCC) 20150623 (Red Hat 4.8.5-4)
  configuration: --prefix=/home/zx/ffmpeg_build --extra-cflags=-I/home/zx/ffmpeg_build/include --extra-ldflags='-L/home/zx/ffmpeg_build/lib -ldl' --bindir=/home/zx/bin --pkg-config-flags=--static --enable-gpl --enable-nonfree --enable-version3 --enable-libfdk_aac --enable-libfreetype --enable-libmp3lame --enable-libopus --enable-libvorbis --enable-libspeex --enable-libvpx --enable-libx264 --disable-shared --enable-static --disable-debug
  libavutil      56. 14.100 / 56. 14.100
  libavcodec     58. 18.100 / 58. 18.100
  libavformat    58. 12.100 / 58. 12.100
  libavdevice    58.  3.100 / 58.  3.100
  libavfilter     7. 16.100 /  7. 16.100
  libswscale      5.  1.100 /  5.  1.100
  libswresample   3.  1.100 /  3.  1.100
  libpostproc    55.  1.100 / 55.  1.100
Input #0, flv, from '111.flv':
  Metadata:
    major_brand     : M4A 
    minor_version   : 512
    compatible_brands: isomiso2
    date            : 2018-05-31 01:31
    encoder         : Lavf57.25.100
  Duration: 00:12:11.40, start: 0.000000, bitrate: 135 kb/s
    Stream #0:0: Audio: aac (LC), 48000 Hz, stereo, fltp, 128 kb/s
Stream mapping:
  Stream #0:0 -> #0:0 (aac (native) -> aac (native))
Press [q] to stop, [?] for help
[hls @ 0x25d4280] Opening 'tmp0.ts' for writing
[mpegts @ 0x26feb80] frame size not set
Output #0, hls, to 'tmp.m3u8':
  Metadata:
    major_brand     : M4A 
    minor_version   : 512
    compatible_brands: isomiso2
    date            : 2018-05-31 01:31
    encoder         : Lavf58.12.100
    Stream #0:0: Audio: aac (LC), 48000 Hz, stereo, fltp, 128 kb/s
    Metadata:
      encoder         : Lavc58.18.100 aac
[hls @ 0x25d4280] Opening 'tmp1.ts' for writing
[hls @ 0x25d4280] Opening 'tmp.m3u8.tmp' for writing
[hls @ 0x25d4280] Opening 'tmp2.ts' for writing
[hls @ 0x25d4280] Opening 'tmp.m3u8.tmp' for writing
[hls @ 0x25d4280] Opening 'tmp3.ts' for writing
[hls @ 0x25d4280] Opening 'tmp.m3u8.tmp' for writing
[hls @ 0x25d4280] Opening 'tmp4.ts' for writing
......
[hls @ 0x25d4280] Opening 'tmp71.ts' for writing
[hls @ 0x25d4280] Opening 'tmp.m3u8.tmp' for writing
[hls @ 0x25d4280] Opening 'tmp72.ts' for writingx    
[hls @ 0x25d4280] Opening 'tmp.m3u8.tmp' for writing
[hls @ 0x25d4280] Opening 'tmp73.ts' for writing
[hls @ 0x25d4280] Opening 'tmp.m3u8.tmp' for writing
[hls @ 0x25d4280] Opening 'tmp.m3u8.tmp' for writing
size=N/A time=00:12:11.39 bitrate=N/A speed=84.7x    
video:0kB audio:11421kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: unknown
[aac @ 0x25a0580] Qavg: 567.976


  



  After transcoding, the duration of the last segment in m3u8 file is 1.39 second :

  



  ....
#EXTINF:9.984000,
tmp71.ts
#EXTINF:10.005333,
tmp72.ts
#EXTINF:1.386667,
tmp73.ts
#EXT-X-ENDLIST


  



  But when I use ffprobe to parse the last segment, I got an error :

  



  ffprobe -i tmp73.ts 
ffprobe version n4.0.1-5-gb5106c5 Copyright (c) 2007-2018 the FFmpeg developers
  built with gcc 4.8.5 (GCC) 20150623 (Red Hat 4.8.5-4)
  configuration: --prefix=/home/zx/ffmpeg_build --extra-cflags=-I/home/zx/ffmpeg_build/include --extra-ldflags='-L/home/zx/ffmpeg_build/lib -ldl' --bindir=/home/zx/bin --pkg-config-flags=--static --enable-gpl --enable-nonfree --enable-version3 --enable-libfdk_aac --enable-libfreetype --enable-libmp3lame --enable-libopus --enable-libvorbis --enable-libspeex --enable-libvpx --enable-libx264 --disable-shared --enable-static --disable-debug
  libavutil      56. 14.100 / 56. 14.100
  libavcodec     58. 18.100 / 58. 18.100
  libavformat    58. 12.100 / 58. 12.100
  libavdevice    58.  3.100 / 58.  3.100
  libavfilter     7. 16.100 /  7. 16.100
  libswscale      5.  1.100 /  5.  1.100
  libswresample   3.  1.100 /  3.  1.100
  libpostproc    55.  1.100 / 55.  1.100
tmp73.ts: Invalid data found when processing input


  



  The input flv :

  



  http://45.76.56.248/hls_transcode_fail.flv
md5sum: 4627bbb27bcb22c143ad4dfa47359650


  



  Since my statistic module relies on the output of ffprobe, this exception will cause the entire transcoding task to fail. My temporary solution is to skip the last segment which is too short in the statistics phase. But I need a more reasonable and robust way to fix or bypass this issue. Any suggestion will be appreciated.

  


• ffmpeg : video codec ansi not compatible with flv

  11 septembre 2018, par diatomym

  lets say i have 10 video files, encoded with the following command in ffmpeg

  ffmpeg -i input.mp4 -c:v libx264 -preset medium -maxrate 6000k -bufsize 6000k -vf "scale=1280:-1,format=yuv420p" -g 50 -c:a aac -b:a 128k -ac 2 -ar 44100 file.flv

  now that all files match in codec, what i want to do is stream all those files via RTMP. for that, I’ll need to create a concat list. i also want the stream to infinitely repeat those 10 files. to do all these things, I use this command :

  ffmpeg -threads 2 -re -fflags +genpts -stream_loop -1 -i mylist.txt -c copy -f flv rtmp://link.to/RTMP

  when doing that, I get the following error output :

   ffmpeg -threads 2 -re -fflags +genpts -stream_loop -1 -i mylist.txt -c copy -f flv rtmp://link.to/RTMP
  
  ffmpeg version 3.4.4-0ubuntu0.18.04.1 Copyright (c) 2000-2018 the FFmpeg developers
  
    built with gcc 7 (Ubuntu 7.3.0-16ubuntu3)
  
    configuration: --prefix=/usr --extra-version=0ubuntu0.18.04.1 --toolchain=hardened --libdir=/usr/lib/x86_64-linux-gnu --incdir=/usr/include/x86_64-linux-gnu --enable-gpl --disable-stripping --enable-avresample --enable-avisynth --enable-gnutls --enable-ladspa --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librubberband --enable-librsvg --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-omx --enable-openal --enable-opengl --enable-sdl2 --enable-libdc1394 --enable-libdrm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libopencv --enable-libx264 --enable-shared
  
    libavutil      55. 78.100 / 55. 78.100
  
    libavcodec     57.107.100 / 57.107.100
  
    libavformat    57. 83.100 / 57. 83.100
  
    libavdevice    57. 10.100 / 57. 10.100
  
    libavfilter     6.107.100 /  6.107.100
  
    libavresample   3.  7.  0 /  3.  7.  0
  
    libswscale      4.  8.100 /  4.  8.100
  
    libswresample   2.  9.100 /  2.  9.100
  
    libpostproc    54.  7.100 / 54.  7.100
  
  Input #0, tty, from 'mylist.txt':
  
    Duration: 00:00:00.24, bitrate: 40 kb/s
  
      Stream #0:0: Video: ansi, pal8, 640x400, 25 fps, 25 tbr, 25 tbn, 25 tbc
  
  [flv @ 0x560ec7662920] ***Video codec ansi not compatible with flv
  
  Could not write header for output file #0 (incorrect codec parameters ?): Function not implemented***
  
  Stream mapping:
  
    Stream #0:0 -> #0:0 (copy)

  ffmpeg is giving me the error

  Video codec ansi not compatible with flv
Could not write header for output file #0 (incorrect codec parameters ?): Function not implemented

  what am i doing wrong ? thanks for the help.

• FFMPEG failing in AWS Lambda

  18 février 2019, par Zaid Amir

  I am trying to create a transcoding function for short videos. The function is hosted on AWS Lambda. The problem is that AWS lambda seems to be missing something that FFMPEG requires, at least according to Amazon.

  I contacted Amazon earlier and this is their response to the issue :

  We found that the FFMPEG operations require at least libx264 and an
  acc library, both of which will have dependencies of their own. To
  troubleshoot the issue it will involve diving deeper into the full
  dependency chain. We can see that it works in the Amazon Linux
  environment however, the environment is similar but not identical to
  the lambda environment. There can be some dependencies that exist in
  Amazon Linux but not in lambda environment as Lambda runs on the
  container. Here, as FFmpeg is a third party software, diving deeper
  into the dependency chain and verifying the version compatibilities is
  very hard to do. Unfortunately going further, this is bound to go into
  architecture and code support which is out of AWS Support scope 1. I
  hope you understand our limitations. However should FFmpeg support
  have any questions specific to the Lambda platform, please do let us
  know and we will be happy to assist. We will be in better position to
  investigate further once you receive an update from the FFmpeg support
  suggesting an issue from Lambda end.

  Upon AWS suggestion, I contacted FFMPEG on the developers mailing list, my message was rejected with the reason being that its more suited to ffmpeg users mailing list than developers. I sent an email to ’ffmpeg-user@ffmpeg.org’ a week ago and did not get any response yet.

  I then went and built a dynamically linked ffmpeg version making sure to package all libraries, checked ddl on each one, then made a small lambda function that looped over all binaries and ddled each one of them, compared that to the output I got from Amazon Linux and the same dependencies/versions exists on both lambda and the AWS Linux instance yet ffmpeg still fails on lambda.

  You can find a detailed log file here : https://www.datafilehost.com/d/6e5e21bb

  And this is a sample of the errors I’m getting, repeated across the entire log file :

  2018-08-14T12:27:10.874Z [h264 @ 0x65c2fc0] concealing 2628 DC, 2628
  AC, 2628 MV errors in P frame

  2018-08-14T12:27:10.874Z [aac @ 0x65d2f00] channel element 2.11 is not
  allocated

  2018-08-14T12:27:10.874Z Error while decoding stream #0:1 : Invalid
  data found when processing input

  2018-08-14T12:27:10.874Z [h264 @ 0x67e86c0] Invalid NAL unit size
  (108085662 > 1649).

  2018-08-14T12:27:10.874Z [h264 @ 0x67e86c0] Error splitting the input
  into NAL units.

  2018-08-14T12:27:10.874Z [aac @ 0x65d2f00] channel element 2.0 is not
  allocated

  2018-08-14T12:27:10.874Z Error while decoding stream #0:1 : Invalid
  data found when processing input

  2018-08-14T12:27:10.874Z [h264 @ 0x68189c0] Invalid NAL unit size
  (71106974 > 1085).

  2018-08-14T12:27:10.874Z [h264 @ 0x68189c0] Error splitting the input
  into NAL units.

  2018-08-14T12:27:10.874Z [aac @ 0x65d2f00] Pulse tool not allowed in
  eight short sequence.

  This log is generated when trying to perform an HLS transcoding on this file : https://www.datafilehost.com/d/999a4492

  Note that the issue is not related to that file alone nor is it related to HLS, its general and happen on all videos and any ffmpeg command that tries to seek the stream, even tried extracting a single frame from a video using the simplest form possible for example : ffmpeg -ss 00:00:02 -I file.mp4 -vframes 1 -y output.jpg also fails with the same errors in the log file.

  Not sure how to debug this further. Tried enabling debug logs with ‘-loglevel debug’ but did not give me any extra info. Any help or suggestions