Recherche avancée
Médias (16)
-
#7 Ambience
16 octobre 2011, par
Mis à jour : Juin 2015
Langue : English
Type : Audio
-
#6 Teaser Music
16 octobre 2011, par
Mis à jour : Février 2013
Langue : English
Type : Audio
-
#5 End Title
16 octobre 2011, par
Mis à jour : Février 2013
Langue : English
Type : Audio
-
#3 The Safest Place
16 octobre 2011, par
Mis à jour : Février 2013
Langue : English
Type : Audio
-
#4 Emo Creates
15 octobre 2011, par
Mis à jour : Février 2013
Langue : English
Type : Audio
-
#2 Typewriter Dance
15 octobre 2011, par
Mis à jour : Février 2013
Langue : English
Type : Audio
Autres articles (50)
-
Des sites réalisés avec MediaSPIP
2 mai 2011, parCette page présente quelques-uns des sites fonctionnant sous MediaSPIP.
Vous pouvez bien entendu ajouter le votre grâce au formulaire en bas de page. -
Les autorisations surchargées par les plugins
27 avril 2010, parMediaspip core
autoriser_auteur_modifier() afin que les visiteurs soient capables de modifier leurs informations sur la page d’auteurs -
Possibilité de déploiement en ferme
12 avril 2011, parMediaSPIP peut être installé comme une ferme, avec un seul "noyau" hébergé sur un serveur dédié et utilisé par une multitude de sites différents.
Cela permet, par exemple : de pouvoir partager les frais de mise en œuvre entre plusieurs projets / individus ; de pouvoir déployer rapidement une multitude de sites uniques ; d’éviter d’avoir à mettre l’ensemble des créations dans un fourre-tout numérique comme c’est le cas pour les grandes plate-formes tout public disséminées sur le (...)
Sur d’autres sites (4826)
-
iOS Build PJSIP with FFmpeg+libx264
22 février 2021, par MeonardoI have built the FFmpeg with libx264 into static libs, here is my directory tree.


./ffmpeg
├── include
│   ├── libavcodec
│   │   ├── ac3_parser.h
│   │   ├── adts_parser.h
│   │   ├── avcodec.h
│   │   ├── avdct.h
│   │   ├── avfft.h
│   │   ├── bsf.h
│   │   ├── codec.h
│   │   ├── codec_desc.h
│   │   ├── codec_id.h
│   │   ├── codec_par.h
│   │   ├── d3d11va.h
│   │   ├── dirac.h
│   │   ├── dv_profile.h
│   │   ├── dxva2.h
│   │   ├── jni.h
│   │   ├── mediacodec.h
│   │   ├── packet.h
│   │   ├── qsv.h
│   │   ├── vaapi.h
│   │   ├── vdpau.h
│   │   ├── version.h
│   │   ├── videotoolbox.h
│   │   ├── vorbis_parser.h
│   │   └── xvmc.h
│   ├── libavdevice
│   │   ├── avdevice.h
│   │   └── version.h
│   ├── libavfilter
│   │   ├── avfilter.h
│   │   ├── buffersink.h
│   │   ├── buffersrc.h
│   │   └── version.h
│   ├── libavformat
│   │   ├── avformat.h
│   │   ├── avio.h
│   │   └── version.h
│   ├── libavutil
│   │   ├── adler32.h
│   │   ├── aes.h
│   │   ├── aes_ctr.h
│   │   ├── attributes.h
│   │   ├── audio_fifo.h
│   │   ├── avassert.h
│   │   ├── avconfig.h
│   │   ├── avstring.h
│   │   ├── avutil.h
│   │   ├── base64.h
│   │   ├── blowfish.h
│   │   ├── bprint.h
│   │   ├── bswap.h
│   │   ├── buffer.h
│   │   ├── camellia.h
│   │   ├── cast5.h
│   │   ├── channel_layout.h
│   │   ├── common.h
│   │   ├── cpu.h
│   │   ├── crc.h
│   │   ├── des.h
│   │   ├── dict.h
│   │   ├── display.h
│   │   ├── dovi_meta.h
│   │   ├── downmix_info.h
│   │   ├── encryption_info.h
│   │   ├── error.h
│   │   ├── eval.h
│   │   ├── ffversion.h
│   │   ├── fifo.h
│   │   ├── file.h
│   │   ├── frame.h
│   │   ├── hash.h
│   │   ├── hdr_dynamic_metadata.h
│   │   ├── hmac.h
│   │   ├── hwcontext.h
│   │   ├── hwcontext_cuda.h
│   │   ├── hwcontext_d3d11va.h
│   │   ├── hwcontext_drm.h
│   │   ├── hwcontext_dxva2.h
│   │   ├── hwcontext_mediacodec.h
│   │   ├── hwcontext_opencl.h
│   │   ├── hwcontext_qsv.h
│   │   ├── hwcontext_vaapi.h
│   │   ├── hwcontext_vdpau.h
│   │   ├── hwcontext_videotoolbox.h
│   │   ├── hwcontext_vulkan.h
│   │   ├── imgutils.h
│   │   ├── intfloat.h
│   │   ├── intreadwrite.h
│   │   ├── lfg.h
│   │   ├── log.h
│   │   ├── lzo.h
│   │   ├── macros.h
│   │   ├── mastering_display_metadata.h
│   │   ├── mathematics.h
│   │   ├── md5.h
│   │   ├── mem.h
│   │   ├── motion_vector.h
│   │   ├── murmur3.h
│   │   ├── opt.h
│   │   ├── parseutils.h
│   │   ├── pixdesc.h
│   │   ├── pixelutils.h
│   │   ├── pixfmt.h
│   │   ├── random_seed.h
│   │   ├── rational.h
│   │   ├── rc4.h
│   │   ├── replaygain.h
│   │   ├── ripemd.h
│   │   ├── samplefmt.h
│   │   ├── sha.h
│   │   ├── sha512.h
│   │   ├── spherical.h
│   │   ├── stereo3d.h
│   │   ├── tea.h
│   │   ├── threadmessage.h
│   │   ├── time.h
│   │   ├── timecode.h
│   │   ├── timestamp.h
│   │   ├── tree.h
│   │   ├── twofish.h
│   │   ├── tx.h
│   │   ├── version.h
│   │   ├── video_enc_params.h
│   │   └── xtea.h
│   ├── libpostproc
│   │   ├── postprocess.h
│   │   └── version.h
│   ├── libswresample
│   │   ├── swresample.h
│   │   └── version.h
│   ├── libswscale
│   │   ├── swscale.h
│   │   └── version.h
│   └── libx264
│   ├── x264.h
│   └── x264_config.h
└── lib
 ├── libavcodec.a
 ├── libavdevice.a
 ├── libavfilter.a
 ├── libavformat.a
 ├── libavutil.a
 ├── libpostproc.a
 ├── libswresample.a
 ├── libswscale.a
 └── libx264.a


The final lib was created successfully, no error message in log file,
but when I import the lib to my Xcode Project,
the linker give me tons of errors(missing symbols like :
Undefined symbol: _pjsua_vid_codec_set_priority).
I found thepjsua_vid.ois very small(200Bytes) compare to my pjsip+openh264 build file(was 47KB), perhaps this is the reason cause the link error.

Here is my build log :
log_file


the build script I am using :


#!/bin/sh

# see http://stackoverflow.com/a/3915420/318790
function realpath { echo $(cd $(dirname "$1"); pwd)/$(basename "$1"); }
__FILE__=`realpath "$0"`
__DIR__=`dirname "${__FILE__}"`

# download
function download() {
 "${__DIR__}/download.sh" "$1" "$2" #--no-cache
}

BASE_DIR="$1"
PJSIP_URL="https://github.com/pjsip/pjproject/archive/2.10.zip"
#http://www.pjsip.org/release/2.8.0/pjproject-2.8.0.tar.bz2
PJSIP_DIR="$1/src"
LIB_PATHS=("pjlib/lib" \
 "pjlib-util/lib" \
 "pjmedia/lib" \
 "pjnath/lib" \
 "pjsip/lib" \
 "third_party/lib")

OPENSSL_PREFIX=
FFMPEG_PREFIX=
OPENH264_PREFIX=
OPUS_PREFIX=
while [ "$#" -gt 0 ]; do
 case $1 in
 --with-openssl)
 if [ "$#" -gt 1 ]; then
 OPENSSL_PREFIX=$(python -c "import os,sys; print os.path.realpath(sys.argv[1])" "$2")
 shift 2
 continue
 else
 echo 'ERROR: Must specify a non-empty "--with-openssl PREFIX" argument.' >&2
 exit 1
 fi
 ;;
 --with-openh264)
 if [ "$#" -gt 1 ]; then
 OPENH264_PREFIX=$(python -c "import os,sys; print os.path.realpath(sys.argv[1])" "$2")
 shift 2
 continue
 else
 echo 'ERROR: Must specify a non-empty "--with-openh264 PREFIX" argument.' >&2
 exit 1
 fi
 ;;
 --with-ffmpeg)
 if [ "$#" -gt 1 ]; then
 FFMPEG_PREFIX=$(python -c "import os,sys; print os.path.realpath(sys.argv[1])" "$2")
 shift 2
 continue
 else
 echo 'ERROR: Must specify a non-empty "--with-ffmpeg PREFIX" argument.' >&2
 exit 1
 fi
 ;;
 --with-opus)
 if [ "$#" -gt 1 ]; then
 OPUS_PREFIX=$(python -c "import os,sys; print os.path.realpath(sys.argv[1])" "$2")
 shift 2
 continue
 else
 echo 'ERROR: Must specify a non-empty "--with-opus PREFIX" argument.' >&2
 exit 1
 fi
 ;;
 esac

 shift
done

function config_site() {
 SOURCE_DIR=$1
 PJSIP_CONFIG_PATH="${SOURCE_DIR}/pjlib/include/pj/config_site.h"
 HAS_VIDEO=

 echo "Creating config_site.h ..."

 if [ -f "${PJSIP_CONFIG_PATH}" ]; then
 rm "${PJSIP_CONFIG_PATH}"
 fi

 echo "#define PJ_CONFIG_IPHONE 1" >> "${PJSIP_CONFIG_PATH}"
 echo "#define PJ_HAS_IPV6 1" >> "${PJSIP_CONFIG_PATH}" # Enable IPV6
 if [[ ${OPENH264_PREFIX} ]]; then
 # echo "#define PJMEDIA_HAS_VID_TOOLBOX_CODEC 1" >> "${PJSIP_CONFIG_PATH}"
 # echo "#define PJMEDIA_HAS_OPENH264_CODEC 1" >> "${PJSIP_CONFIG_PATH}"
 echo "#define PJMEDIA_HAS_FFMPEG_VID_CODEC 1" >> "${PJSIP_CONFIG_PATH}"
 HAS_VIDEO=1
 fi
 if [[ ${HAS_VIDEO} ]]; then
 echo "#define PJMEDIA_HAS_VIDEO 1" >> "${PJSIP_CONFIG_PATH}"
 echo "#define PJMEDIA_VIDEO_DEV_HAS_OPENGL 1" >> "${PJSIP_CONFIG_PATH}"
 echo "#define PJMEDIA_VIDEO_DEV_HAS_OPENGL_ES 1" >> "${PJSIP_CONFIG_PATH}"
 echo "#define PJMEDIA_VIDEO_DEV_HAS_IOS_OPENGL 1" >> "${PJSIP_CONFIG_PATH}"
 echo "#include <opengles></opengles>ES3/glext.h>" >> "${PJSIP_CONFIG_PATH}"
 fi
 echo "#include <pj></pj>config_site_sample.h>" >> "${PJSIP_CONFIG_PATH}"
}

function clean_libs () {
 ARCH=${1}
 for SRC_DIR in ${LIB_PATHS[*]}; do
 DIR="${PJSIP_DIR}/${SRC_DIR}"
 if [ -d "${DIR}" ]; then
 rm -rf "${DIR}"/*
 fi

 DIR="${PJSIP_DIR}/${SRC_DIR}-${ARCH}"
 if [ -d "${DIR}" ]; then
 rm -rf "${DIR}"
 fi
 done
}

function copy_libs () {
 ARCH=${1}

 for SRC_DIR in ${LIB_PATHS[*]}; do
 SRC_DIR="${PJSIP_DIR}/${SRC_DIR}"
 DST_DIR="${SRC_DIR}-${ARCH}"
 if [ -d "${DST_DIR}" ]; then
 rm -rf "${DST_DIR}"
 fi
 cp -R "${SRC_DIR}" "${DST_DIR}"
 rm -rf "${SRC_DIR}"/* # delete files because this directory will be used for the final lipo output
 done
}

function _build() {
 pushd . > /dev/null
 cd ${PJSIP_DIR}

 ARCH=$1
 LOG=${BASE_DIR}/${ARCH}.log

 # configure
 CONFIGURE="./configure-iphone"
 if [[ ${OPENSSL_PREFIX} ]]; then
 CONFIGURE="${CONFIGURE} --with-ssl=${OPENSSL_PREFIX}"
 fi
 # if [[ ${OPENH264_PREFIX} ]]; then
 # CONFIGURE="${CONFIGURE} --with-openh264=${OPENH264_PREFIX}"
 # fi
 if [[ ${FFMPEG_PREFIX} ]]; then
 CONFIGURE="${CONFIGURE} --with-ffmpeg=${FFMPEG_PREFIX}"
 fi
 if [[ ${OPUS_PREFIX} ]]; then
 CONFIGURE="${CONFIGURE} --with-opus=${OPUS_PREFIX}"
 fi

 # flags
 if [[ ! ${CFLAGS} ]]; then
 export CFLAGS=
 fi
 if [[ ! ${LDFLAGS} ]]; then
 export LDFLAGS=
 fi
 if [[ ${OPENSSL_PREFIX} ]]; then
 export CFLAGS="${CFLAGS} -I${OPENSSL_PREFIX}/include"
 export LDFLAGS="${LDFLAGS} -L${OPENSSL_PREFIX}/lib"
 fi
 # if [[ ${OPENH264_PREFIX} ]]; then
 # export CFLAGS="${CFLAGS} -I${OPENH264_PREFIX}/include"
 # export LDFLAGS="${LDFLAGS} -L${OPENH264_PREFIX}/lib"
 # fi
 if [[ ${FFMPEG_PREFIX} ]]; then
 export CFLAGS="${CFLAGS} -I${FFMPEG_PREFIX}/include"
 export LDFLAGS="${LDFLAGS} -L${FFMPEG_PREFIX}/lib"
 fi
 export LDFLAGS="${LDFLAGS} -lstdc++"

 echo "Building for ${ARCH}..."

 clean_libs ${ARCH}

 make distclean > ${LOG} 2>&1
 ARCH="-arch ${ARCH}" ${CONFIGURE} >> ${LOG} 2>&1
 make dep >> ${LOG} 2>&1
 make clean >> ${LOG}
 make lib >> ${LOG} 2>&1

 copy_libs ${ARCH}
}

# function armv7() {
# export DEVPATH="`xcrun -sdk iphoneos --show-sdk-platform-path`/Developer"
# export CFLAGS="-miphoneos-version-min=8.0"
# export LDFLAGS=
# _build "armv7"
# }
# function armv7s() {
# export DEVPATH="`xcrun -sdk iphoneos --show-sdk-platform-path`/Developer"
# export CFLAGS="-miphoneos-version-min=8.0"
# export LDFLAGS=
# _build "armv7s"
# }
function arm64() {
 export DEVPATH="`xcrun -sdk iphoneos --show-sdk-platform-path`/Developer"
 export CFLAGS="-miphoneos-version-min=8.0"
 export LDFLAGS=
 _build "arm64"
}
function i386() {
 export DEVPATH="`xcrun -sdk iphonesimulator --show-sdk-platform-path`/Developer"
 export CFLAGS="-O2 -m32 -mios-simulator-version-min=8.0"
 export LDFLAGS="-O2 -m32 -mios-simulator-version-min=8.0"
 _build "i386"
}
function x86_64() {
 export DEVPATH="`xcrun -sdk iphonesimulator --show-sdk-platform-path`/Developer"
 export CFLAGS="-O2 -m32 -mios-simulator-version-min=8.0"
 export LDFLAGS="-O2 -m32 -mios-simulator-version-min=8.0"
 _build "x86_64"
}

function lipo() {
 TMP=`mktemp -t lipo`
 echo "Lipo libs... (${TMP})"

 for LIB_DIR in ${LIB_PATHS[*]}; do # loop over libs
 DST_DIR="${PJSIP_DIR}/${LIB_DIR}"

 # use the first architecture to find all libraries
 PATTERN_DIR="${DST_DIR}-$1"
 for PATTERN_FILE in `ls -l1 "${PATTERN_DIR}"`; do
 OPTIONS=""

 # loop over all architectures and collect the current library
 for ARCH in "$@"; do
 FILE="${DST_DIR}-${ARCH}/${PATTERN_FILE/-$1-/-${ARCH}-}"
 if [ -e "${FILE}" ]; then
 OPTIONS="$OPTIONS -arch ${ARCH} ${FILE}"
 fi
 done

 if [ "$OPTIONS" != "" ]; then
 OUTPUT_PREFIX=$(dirname "${DST_DIR}")
 OUTPUT="${OUTPUT_PREFIX}/lib/${PATTERN_FILE/-$1-/-}"

 OPTIONS="${OPTIONS} -create -output ${OUTPUT}"
 echo "$OPTIONS" >> "${TMP}"
 fi
 done
 done

 while read LINE; do
 xcrun -sdk iphoneos lipo ${LINE}
 done < "${TMP}"
}

# download "${PJSIP_URL}" "${PJSIP_DIR}"
config_site "${PJSIP_DIR}"
arm64 && i386 && x86_64
lipo arm64 i386 x86_64


Thanks for any advice.


-
iOS Build PJSIP with FFmpeg+libx264
22 février 2021, par MeonardoI have built the FFmpeg with libx264 into static libs, here is my directory tree.


./ffmpeg
├── include
│   ├── libavcodec
│   │   ├── ac3_parser.h
│   │   ├── adts_parser.h
│   │   ├── avcodec.h
│   │   ├── avdct.h
│   │   ├── avfft.h
│   │   ├── bsf.h
│   │   ├── codec.h
│   │   ├── codec_desc.h
│   │   ├── codec_id.h
│   │   ├── codec_par.h
│   │   ├── d3d11va.h
│   │   ├── dirac.h
│   │   ├── dv_profile.h
│   │   ├── dxva2.h
│   │   ├── jni.h
│   │   ├── mediacodec.h
│   │   ├── packet.h
│   │   ├── qsv.h
│   │   ├── vaapi.h
│   │   ├── vdpau.h
│   │   ├── version.h
│   │   ├── videotoolbox.h
│   │   ├── vorbis_parser.h
│   │   └── xvmc.h
│   ├── libavdevice
│   │   ├── avdevice.h
│   │   └── version.h
│   ├── libavfilter
│   │   ├── avfilter.h
│   │   ├── buffersink.h
│   │   ├── buffersrc.h
│   │   └── version.h
│   ├── libavformat
│   │   ├── avformat.h
│   │   ├── avio.h
│   │   └── version.h
│   ├── libavutil
│   │   ├── adler32.h
│   │   ├── aes.h
│   │   ├── aes_ctr.h
│   │   ├── attributes.h
│   │   ├── audio_fifo.h
│   │   ├── avassert.h
│   │   ├── avconfig.h
│   │   ├── avstring.h
│   │   ├── avutil.h
│   │   ├── base64.h
│   │   ├── blowfish.h
│   │   ├── bprint.h
│   │   ├── bswap.h
│   │   ├── buffer.h
│   │   ├── camellia.h
│   │   ├── cast5.h
│   │   ├── channel_layout.h
│   │   ├── common.h
│   │   ├── cpu.h
│   │   ├── crc.h
│   │   ├── des.h
│   │   ├── dict.h
│   │   ├── display.h
│   │   ├── dovi_meta.h
│   │   ├── downmix_info.h
│   │   ├── encryption_info.h
│   │   ├── error.h
│   │   ├── eval.h
│   │   ├── ffversion.h
│   │   ├── fifo.h
│   │   ├── file.h
│   │   ├── frame.h
│   │   ├── hash.h
│   │   ├── hdr_dynamic_metadata.h
│   │   ├── hmac.h
│   │   ├── hwcontext.h
│   │   ├── hwcontext_cuda.h
│   │   ├── hwcontext_d3d11va.h
│   │   ├── hwcontext_drm.h
│   │   ├── hwcontext_dxva2.h
│   │   ├── hwcontext_mediacodec.h
│   │   ├── hwcontext_opencl.h
│   │   ├── hwcontext_qsv.h
│   │   ├── hwcontext_vaapi.h
│   │   ├── hwcontext_vdpau.h
│   │   ├── hwcontext_videotoolbox.h
│   │   ├── hwcontext_vulkan.h
│   │   ├── imgutils.h
│   │   ├── intfloat.h
│   │   ├── intreadwrite.h
│   │   ├── lfg.h
│   │   ├── log.h
│   │   ├── lzo.h
│   │   ├── macros.h
│   │   ├── mastering_display_metadata.h
│   │   ├── mathematics.h
│   │   ├── md5.h
│   │   ├── mem.h
│   │   ├── motion_vector.h
│   │   ├── murmur3.h
│   │   ├── opt.h
│   │   ├── parseutils.h
│   │   ├── pixdesc.h
│   │   ├── pixelutils.h
│   │   ├── pixfmt.h
│   │   ├── random_seed.h
│   │   ├── rational.h
│   │   ├── rc4.h
│   │   ├── replaygain.h
│   │   ├── ripemd.h
│   │   ├── samplefmt.h
│   │   ├── sha.h
│   │   ├── sha512.h
│   │   ├── spherical.h
│   │   ├── stereo3d.h
│   │   ├── tea.h
│   │   ├── threadmessage.h
│   │   ├── time.h
│   │   ├── timecode.h
│   │   ├── timestamp.h
│   │   ├── tree.h
│   │   ├── twofish.h
│   │   ├── tx.h
│   │   ├── version.h
│   │   ├── video_enc_params.h
│   │   └── xtea.h
│   ├── libpostproc
│   │   ├── postprocess.h
│   │   └── version.h
│   ├── libswresample
│   │   ├── swresample.h
│   │   └── version.h
│   ├── libswscale
│   │   ├── swscale.h
│   │   └── version.h
│   └── libx264
│   ├── x264.h
│   └── x264_config.h
└── lib
 ├── libavcodec.a
 ├── libavdevice.a
 ├── libavfilter.a
 ├── libavformat.a
 ├── libavutil.a
 ├── libpostproc.a
 ├── libswresample.a
 ├── libswscale.a
 └── libx264.a


The final lib was created successfully, no error message in log file,
but when I import the lib to my Xcode Project,
the linker give me tons of errors(missing symbols like :
Undefined symbol: _pjsua_vid_codec_set_priority).
I found thepjsua_vid.ois very small(200Bytes) compare to my pjsip+openh264 build file(was 47KB), perhaps this is the reason cause the link error.

Here is my build log :
log_file


the build script I am using :


#!/bin/sh

# see http://stackoverflow.com/a/3915420/318790
function realpath { echo $(cd $(dirname "$1"); pwd)/$(basename "$1"); }
__FILE__=`realpath "$0"`
__DIR__=`dirname "${__FILE__}"`

# download
function download() {
 "${__DIR__}/download.sh" "$1" "$2" #--no-cache
}

BASE_DIR="$1"
PJSIP_URL="https://github.com/pjsip/pjproject/archive/2.10.zip"
#http://www.pjsip.org/release/2.8.0/pjproject-2.8.0.tar.bz2
PJSIP_DIR="$1/src"
LIB_PATHS=("pjlib/lib" \
 "pjlib-util/lib" \
 "pjmedia/lib" \
 "pjnath/lib" \
 "pjsip/lib" \
 "third_party/lib")

OPENSSL_PREFIX=
FFMPEG_PREFIX=
OPENH264_PREFIX=
OPUS_PREFIX=
while [ "$#" -gt 0 ]; do
 case $1 in
 --with-openssl)
 if [ "$#" -gt 1 ]; then
 OPENSSL_PREFIX=$(python -c "import os,sys; print os.path.realpath(sys.argv[1])" "$2")
 shift 2
 continue
 else
 echo 'ERROR: Must specify a non-empty "--with-openssl PREFIX" argument.' >&2
 exit 1
 fi
 ;;
 --with-openh264)
 if [ "$#" -gt 1 ]; then
 OPENH264_PREFIX=$(python -c "import os,sys; print os.path.realpath(sys.argv[1])" "$2")
 shift 2
 continue
 else
 echo 'ERROR: Must specify a non-empty "--with-openh264 PREFIX" argument.' >&2
 exit 1
 fi
 ;;
 --with-ffmpeg)
 if [ "$#" -gt 1 ]; then
 FFMPEG_PREFIX=$(python -c "import os,sys; print os.path.realpath(sys.argv[1])" "$2")
 shift 2
 continue
 else
 echo 'ERROR: Must specify a non-empty "--with-ffmpeg PREFIX" argument.' >&2
 exit 1
 fi
 ;;
 --with-opus)
 if [ "$#" -gt 1 ]; then
 OPUS_PREFIX=$(python -c "import os,sys; print os.path.realpath(sys.argv[1])" "$2")
 shift 2
 continue
 else
 echo 'ERROR: Must specify a non-empty "--with-opus PREFIX" argument.' >&2
 exit 1
 fi
 ;;
 esac

 shift
done

function config_site() {
 SOURCE_DIR=$1
 PJSIP_CONFIG_PATH="${SOURCE_DIR}/pjlib/include/pj/config_site.h"
 HAS_VIDEO=

 echo "Creating config_site.h ..."

 if [ -f "${PJSIP_CONFIG_PATH}" ]; then
 rm "${PJSIP_CONFIG_PATH}"
 fi

 echo "#define PJ_CONFIG_IPHONE 1" >> "${PJSIP_CONFIG_PATH}"
 echo "#define PJ_HAS_IPV6 1" >> "${PJSIP_CONFIG_PATH}" # Enable IPV6
 if [[ ${OPENH264_PREFIX} ]]; then
 # echo "#define PJMEDIA_HAS_VID_TOOLBOX_CODEC 1" >> "${PJSIP_CONFIG_PATH}"
 # echo "#define PJMEDIA_HAS_OPENH264_CODEC 1" >> "${PJSIP_CONFIG_PATH}"
 echo "#define PJMEDIA_HAS_FFMPEG_VID_CODEC 1" >> "${PJSIP_CONFIG_PATH}"
 HAS_VIDEO=1
 fi
 if [[ ${HAS_VIDEO} ]]; then
 echo "#define PJMEDIA_HAS_VIDEO 1" >> "${PJSIP_CONFIG_PATH}"
 echo "#define PJMEDIA_VIDEO_DEV_HAS_OPENGL 1" >> "${PJSIP_CONFIG_PATH}"
 echo "#define PJMEDIA_VIDEO_DEV_HAS_OPENGL_ES 1" >> "${PJSIP_CONFIG_PATH}"
 echo "#define PJMEDIA_VIDEO_DEV_HAS_IOS_OPENGL 1" >> "${PJSIP_CONFIG_PATH}"
 echo "#include <opengles></opengles>ES3/glext.h>" >> "${PJSIP_CONFIG_PATH}"
 fi
 echo "#include <pj></pj>config_site_sample.h>" >> "${PJSIP_CONFIG_PATH}"
}

function clean_libs () {
 ARCH=${1}
 for SRC_DIR in ${LIB_PATHS[*]}; do
 DIR="${PJSIP_DIR}/${SRC_DIR}"
 if [ -d "${DIR}" ]; then
 rm -rf "${DIR}"/*
 fi

 DIR="${PJSIP_DIR}/${SRC_DIR}-${ARCH}"
 if [ -d "${DIR}" ]; then
 rm -rf "${DIR}"
 fi
 done
}

function copy_libs () {
 ARCH=${1}

 for SRC_DIR in ${LIB_PATHS[*]}; do
 SRC_DIR="${PJSIP_DIR}/${SRC_DIR}"
 DST_DIR="${SRC_DIR}-${ARCH}"
 if [ -d "${DST_DIR}" ]; then
 rm -rf "${DST_DIR}"
 fi
 cp -R "${SRC_DIR}" "${DST_DIR}"
 rm -rf "${SRC_DIR}"/* # delete files because this directory will be used for the final lipo output
 done
}

function _build() {
 pushd . > /dev/null
 cd ${PJSIP_DIR}

 ARCH=$1
 LOG=${BASE_DIR}/${ARCH}.log

 # configure
 CONFIGURE="./configure-iphone"
 if [[ ${OPENSSL_PREFIX} ]]; then
 CONFIGURE="${CONFIGURE} --with-ssl=${OPENSSL_PREFIX}"
 fi
 # if [[ ${OPENH264_PREFIX} ]]; then
 # CONFIGURE="${CONFIGURE} --with-openh264=${OPENH264_PREFIX}"
 # fi
 if [[ ${FFMPEG_PREFIX} ]]; then
 CONFIGURE="${CONFIGURE} --with-ffmpeg=${FFMPEG_PREFIX}"
 fi
 if [[ ${OPUS_PREFIX} ]]; then
 CONFIGURE="${CONFIGURE} --with-opus=${OPUS_PREFIX}"
 fi

 # flags
 if [[ ! ${CFLAGS} ]]; then
 export CFLAGS=
 fi
 if [[ ! ${LDFLAGS} ]]; then
 export LDFLAGS=
 fi
 if [[ ${OPENSSL_PREFIX} ]]; then
 export CFLAGS="${CFLAGS} -I${OPENSSL_PREFIX}/include"
 export LDFLAGS="${LDFLAGS} -L${OPENSSL_PREFIX}/lib"
 fi
 # if [[ ${OPENH264_PREFIX} ]]; then
 # export CFLAGS="${CFLAGS} -I${OPENH264_PREFIX}/include"
 # export LDFLAGS="${LDFLAGS} -L${OPENH264_PREFIX}/lib"
 # fi
 if [[ ${FFMPEG_PREFIX} ]]; then
 export CFLAGS="${CFLAGS} -I${FFMPEG_PREFIX}/include"
 export LDFLAGS="${LDFLAGS} -L${FFMPEG_PREFIX}/lib"
 fi
 export LDFLAGS="${LDFLAGS} -lstdc++"

 echo "Building for ${ARCH}..."

 clean_libs ${ARCH}

 make distclean > ${LOG} 2>&1
 ARCH="-arch ${ARCH}" ${CONFIGURE} >> ${LOG} 2>&1
 make dep >> ${LOG} 2>&1
 make clean >> ${LOG}
 make lib >> ${LOG} 2>&1

 copy_libs ${ARCH}
}

# function armv7() {
# export DEVPATH="`xcrun -sdk iphoneos --show-sdk-platform-path`/Developer"
# export CFLAGS="-miphoneos-version-min=8.0"
# export LDFLAGS=
# _build "armv7"
# }
# function armv7s() {
# export DEVPATH="`xcrun -sdk iphoneos --show-sdk-platform-path`/Developer"
# export CFLAGS="-miphoneos-version-min=8.0"
# export LDFLAGS=
# _build "armv7s"
# }
function arm64() {
 export DEVPATH="`xcrun -sdk iphoneos --show-sdk-platform-path`/Developer"
 export CFLAGS="-miphoneos-version-min=8.0"
 export LDFLAGS=
 _build "arm64"
}
function i386() {
 export DEVPATH="`xcrun -sdk iphonesimulator --show-sdk-platform-path`/Developer"
 export CFLAGS="-O2 -m32 -mios-simulator-version-min=8.0"
 export LDFLAGS="-O2 -m32 -mios-simulator-version-min=8.0"
 _build "i386"
}
function x86_64() {
 export DEVPATH="`xcrun -sdk iphonesimulator --show-sdk-platform-path`/Developer"
 export CFLAGS="-O2 -m32 -mios-simulator-version-min=8.0"
 export LDFLAGS="-O2 -m32 -mios-simulator-version-min=8.0"
 _build "x86_64"
}

function lipo() {
 TMP=`mktemp -t lipo`
 echo "Lipo libs... (${TMP})"

 for LIB_DIR in ${LIB_PATHS[*]}; do # loop over libs
 DST_DIR="${PJSIP_DIR}/${LIB_DIR}"

 # use the first architecture to find all libraries
 PATTERN_DIR="${DST_DIR}-$1"
 for PATTERN_FILE in `ls -l1 "${PATTERN_DIR}"`; do
 OPTIONS=""

 # loop over all architectures and collect the current library
 for ARCH in "$@"; do
 FILE="${DST_DIR}-${ARCH}/${PATTERN_FILE/-$1-/-${ARCH}-}"
 if [ -e "${FILE}" ]; then
 OPTIONS="$OPTIONS -arch ${ARCH} ${FILE}"
 fi
 done

 if [ "$OPTIONS" != "" ]; then
 OUTPUT_PREFIX=$(dirname "${DST_DIR}")
 OUTPUT="${OUTPUT_PREFIX}/lib/${PATTERN_FILE/-$1-/-}"

 OPTIONS="${OPTIONS} -create -output ${OUTPUT}"
 echo "$OPTIONS" >> "${TMP}"
 fi
 done
 done

 while read LINE; do
 xcrun -sdk iphoneos lipo ${LINE}
 done < "${TMP}"
}

# download "${PJSIP_URL}" "${PJSIP_DIR}"
config_site "${PJSIP_DIR}"
arm64 && i386 && x86_64
lipo arm64 i386 x86_64


Thanks for any advice.


-
Download Instagram Livestreams [closed]
19 décembre 2020, par UnixCoonI've been looking for what Instagram livestreams can download for a long time. I can only record you via screen recording on my iPhone. But I would much rather just download it with my computer.


I've tried a lot, but I can't get the video address where a live stream is playing. I know that it is possible to download a YouTube livestream, for example, with ffmpeg.


Maybe any of you know how I download Instagram livestreams ? I would be very, very happy.


I am grateful for every answer
Greetings UnixCoon


Syndiquer tout le site
