
Recherche avancée
Médias (1)
-
The Slip - Artworks
26 septembre 2011, par
Mis à jour : Septembre 2011
Langue : English
Type : Texte
Autres articles (9)
-
D’autres logiciels intéressants
12 avril 2011, parOn ne revendique pas d’être les seuls à faire ce que l’on fait ... et on ne revendique surtout pas d’être les meilleurs non plus ... Ce que l’on fait, on essaie juste de le faire bien, et de mieux en mieux...
La liste suivante correspond à des logiciels qui tendent peu ou prou à faire comme MediaSPIP ou que MediaSPIP tente peu ou prou à faire pareil, peu importe ...
On ne les connais pas, on ne les a pas essayé, mais vous pouvez peut être y jeter un coup d’oeil.
Videopress
Site Internet : (...) -
Sélection de projets utilisant MediaSPIP
29 avril 2011, parLes exemples cités ci-dessous sont des éléments représentatifs d’usages spécifiques de MediaSPIP pour certains projets.
Vous pensez avoir un site "remarquable" réalisé avec MediaSPIP ? Faites le nous savoir ici.
Ferme MediaSPIP @ Infini
L’Association Infini développe des activités d’accueil, de point d’accès internet, de formation, de conduite de projets innovants dans le domaine des Technologies de l’Information et de la Communication, et l’hébergement de sites. Elle joue en la matière un rôle unique (...) -
Other interesting software
13 avril 2011, parWe don’t claim to be the only ones doing what we do ... and especially not to assert claims to be the best either ... What we do, we just try to do it well and getting better ...
The following list represents softwares that tend to be more or less as MediaSPIP or that MediaSPIP tries more or less to do the same, whatever ...
We don’t know them, we didn’t try them, but you can take a peek.
Videopress
Website : http://videopress.com/
License : GNU/GPL v2
Source code : (...)
Sur d’autres sites (5521)
-
FFMPEG frames lost
4 juin 2018, par ST94I use ffmpeg to stream video from the source to destination. The workflow is as follows,
At the source using ffmpeg, I stream live feed from a webcam using tcp and also save a copy of the live video as mp4 file locally and the command I use is$ ffmpeg -hide_banner -f v4l2 -i /dev/video0 -filter:v "fps=30" -c:v libx264 -f mpegts tcp://hostname:port -c:v libx264 /path/to/.mp4file
`Input #0, video4linux2,v4l2, from '/dev/video0':
Duration: N/A, start: 272402.639303, bitrate: 147456 kb/s
Stream #0:0: Video: rawvideo (YUY2 / 0x32595559), yuyv422, 640x480, 147456 kb/s, 30 fps, 30 tbr, 1000k tbn, 1000k tbc
Stream mapping:
Stream #0:0 -> #0:0 (rawvideo (native) -> h264 (libx264))
Stream #0:0 -> #1:0 (rawvideo (native) -> h264 (libx264))
Press [q] to stop, [?] for help
No pixel format specified, yuv422p for H.264 encoding chosen.
Use -pix_fmt yuv420p for compatibility with outdated media players.
[libx264 @ 0x55e421ec9560] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 AVX2 LZCNT BMI2
[libx264 @ 0x55e421ec9560] profile High 4:2:2, level 3.0, 4:2:2 8-bit
Output #0, mpegts, to 'tcp://172.16.0.169:50000':
Metadata:
encoder : Lavf57.71.100
Stream #0:0: Video: h264 (libx264), yuv422p, 640x480, q=-1--1, 30 fps, 90k tbn, 30 tbc
Metadata:
encoder : Lavc57.89.100 libx264
Side data:
cpb: bitrate max/min/avg: 0/0/0 buffer size: 0 vbv_delay: -1
No pixel format specified, yuv422p for H.264 encoding chosen.
Use -pix_fmt yuv420p for compatibility with outdated media players.
[libx264 @ 0x55e421ed5ea0] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 AVX2 LZCNT BMI2
[libx264 @ 0x55e421ed5ea0] profile High 4:2:2, level 3.0, 4:2:2 8-bit
[libx264 @ 0x55e421ed5ea0] 264 - core 148 r2795 aaa9aa8 - H.264/MPEG-4 AVC codec - Copyleft 2003-2017 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=12 lookahead_threads=2 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
Output #1, mp4, to '/path/to/tcp.mp4':
Metadata:
encoder : Lavf57.71.100
Stream #1:0: Video: h264 (libx264) ([33][0][0][0] / 0x0021), yuv422p, 640x480, q=-1--1, 30 fps, 15360 tbn, 30 tbc
Metadata:
encoder : Lavc57.89.100 libx264
Side data:
cpb: bitrate max/min/avg: 0/0/0 buffer size: 0 vbv_delay: -1
[sana@localhost ~]$ frame= 978 fps= 30 q=-1.0 Lq=-1.0 size= 5062kB time=00:00:32.53 bitrate=1274.6kbits/s dup=514 drop=0 speed=0.991x
video:9174kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: unknown
[libx264 @ 0x55e421ec9560] frame I:463 Avg QP:19.03 size: 9994
[libx264 @ 0x55e421ec9560] frame P:476 Avg QP:22.85 size: 137
[libx264 @ 0x55e421ec9560] frame B:39 Avg QP:23.33 size: 19
[libx264 @ 0x55e421ec9560] consecutive B-frames: 94.7% 0.0% 0.0% 5.3%
[libx264 @ 0x55e421ec9560] mb I I16..4: 60.4% 39.0% 0.5%
[libx264 @ 0x55e421ec9560] mb P I16..4: 0.2% 0.0% 0.0% P16..4: 4.2% 0.3% 0.5% 0.0% 0.0% skip:94.8%
[libx264 @ 0x55e421ec9560] mb B I16..4: 0.0% 0.0% 0.0% B16..8: 0.0% 0.0% 0.0% direct: 0.0% skip:100.0% L0:15.4% L1:84.6% BI: 0.0%
[libx264 @ 0x55e421ec9560] 8x8 transform intra:38.9% inter:100.0%
[libx264 @ 0x55e421ec9560] coded y,uvDC,uvAC intra: 34.9% 97.2% 83.8% inter: 0.0% 1.5% 0.0%
[libx264 @ 0x55e421ec9560] i16 v,h,dc,p: 0% 31% 0% 69%
[libx264 @ 0x55e421ec9560] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 3% 50% 16% 4% 2% 1% 6% 1% 17%
[libx264 @ 0x55e421ec9560] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 10% 52% 14% 4% 7% 3% 5% 1% 3%
[libx264 @ 0x55e421ec9560] i8c dc,h,v,p: 55% 12% 25% 8%
[libx264 @ 0x55e421ec9560] Weighted P-Frames: Y:0.2% UV:0.0%
[libx264 @ 0x55e421ec9560] ref P L0: 96.7% 0.5% 2.7% 0.1%
[libx264 @ 0x55e421ec9560] kb/s:1151.61
[libx264 @ 0x55e421ed5ea0] frame I:463 Avg QP:19.02 size: 10007
[libx264 @ 0x55e421ed5ea0] frame P:477 Avg QP:22.84 size: 140
[libx264 @ 0x55e421ed5ea0] frame B:39 Avg QP:23.33 size: 19
[libx264 @ 0x55e421ed5ea0] consecutive B-frames: 94.7% 0.0% 0.0% 5.3%
[libx264 @ 0x55e421ed5ea0] mb I I16..4: 60.4% 39.0% 0.5%
[libx264 @ 0x55e421ed5ea0] mb P I16..4: 0.3% 0.0% 0.0% P16..4: 4.2% 0.3% 0.5% 0.0% 0.0% skip:94.8%
[libx264 @ 0x55e421ed5ea0] mb B I16..4: 0.0% 0.0% 0.0% B16..8: 0.0% 0.0% 0.0% direct: 0.0% skip:100.0% L0:15.4% L1:84.6% BI: 0.0%
[libx264 @ 0x55e421ed5ea0] 8x8 transform intra:38.9% inter:100.0%
[libx264 @ 0x55e421ed5ea0] coded y,uvDC,uvAC intra: 35.0% 97.2% 84.0% inter: 0.0% 1.6% 0.0%
[libx264 @ 0x55e421ed5ea0] i16 v,h,dc,p: 0% 31% 0% 69%
[libx264 @ 0x55e421ed5ea0] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 3% 50% 16% 4% 2% 1% 6% 1% 17%
[libx264 @ 0x55e421ed5ea0] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 10% 52% 14% 4% 7% 3% 5% 1% 3%
[libx264 @ 0x55e421ed5ea0] i8c dc,h,v,p: 55% 12% 25% 8%
[libx264 @ 0x55e421ed5ea0] Weighted P-Frames: Y:0.2% UV:0.0%
[libx264 @ 0x55e421ed5ea0] ref P L0: 96.8% 0.5% 2.7% 0.1%
[libx264 @ 0x55e421ed5ea0] kb/s:1152.39`At the receiver, I take the tcp url as the input and output it to an mp4 file.
$ffmpeg -hide_banner -i tcp://hostname:port?listen out.mp4 /path/to/.mp4
The output is
`Input #0, mpegts, from 'tcp://172.16.0.169:50000?listen':
Duration: N/A, start: 1.466667, bitrate: N/A
Program 1
Metadata:
service_name : Service01
service_provider: FFmpeg
Stream #0:0[0x100]: Video: h264 (High 4:2:2) ([27][0][0][0] / 0x001B), yuv422p(progressive), 640x480, 30 fps, 30 tbr, 90k tbn, 60 tbc
Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> h264 (libx264))
Press [q] to stop, [?] for help
No pixel format specified, yuv422p for H.264 encoding chosen.
Use -pix_fmt yuv420p for compatibility with outdated media players.
[libx264 @ 0x55c1d6bff0a0] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 AVX2 LZCNT BMI2
[libx264 @ 0x55c1d6bff0a0] profile High 4:2:2, level 3.0, 4:2:2 8-bit
[libx264 @ 0x55c1d6bff0a0] 264 - core 148 r2795 aaa9aa8 - H.264/MPEG-4 AVC codec - Copyleft 2003-2017 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=12 lookahead_threads=2 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
Output #0, mp4, to '/home/sana/Desktop/receiver_new_mp4/tcp2.mp4':
Metadata:
encoder : Lavf57.71.100
Stream #0:0: Video: h264 (libx264) ([33][0][0][0] / 0x0021), yuv422p, 640x480, q=-1--1, 30 fps, 15360 tbn, 30 tbc
Metadata:
encoder : Lavc57.89.100 libx264
Side data:
cpb: bitrate max/min/avg: 0/0/0 buffer size: 0 vbv_delay: -1
frame= 160 fps=0.0 q=26.0 size= 158kB time=00:00:03.36 bitrate= 384.5kbits/frame= 175 fps=168 q=26.0 size= 200kB time=00:00:03.86 bitrate= 424.8kbits/frame= 190 fps=119 q=26.0 size= 242kB time=00:00:04.36 bitrate= 453.3kbits/frame= 206 fps= 97 q=29.0 size= 292kB time=00:00:04.90 bitrate= 487.8kbits/frame= 222 fps= 84 q=29.0 size= 336kB time=00:00:05.43 bitrate= 506.5kbits/frame= 238 fps= 75 q=29.0 size= 378kB time=00:00:05.96 bitrate= 519.2kbits/frame= 254 fps= 68 q=29.0 size= 422kB time=00:00:06.50 bitrate= 531.6kbits/frame= 270 fps= 64 q=26.0 size= 457kB time=00:00:07.03 bitrate= 532.0kbits/frame= 286 fps= 60 q=29.0 size= 511kB time=00:00:07.56 bitrate= 552.8kbits/frame= 302 fps= 57 q=26.0 size= 562kB time=00:00:08.10 bitrate= 568.3kbits/frame= 318 fps= 54 q=26.0 size= 609kB time=00:00:08.63 bitrate= 577.9kbits/frame= 334 fps= 52 q=26.0 size= 674kB time=00:00:09.16 bitrate= 602.7kbits/frame= 350 fps= 51 q=29.0 size= 719kB time=00:00:09.70 bitrate= 606.8kbits/frame= 366 fps= 49 q=26.0 size= 770kB time=00:00:10.23 bitrate= 616.1kbits/frame= 382 fps= 48 q=29.0 size= 828kB time=00:00:10.76 bitrate= 630.3kbits/frame= 398 fps= 47 q=26.0 size= 872kB time=00:00:11.30 bitrate= 632.0kbits/frame= 414 fps= 46 q=26.0 size= 933kB time=00:00:11.83 bitrate= 645.9kbits/frame= 430 fps= 45 q=29.0 size= 987kB time=00:00:12.36 bitrate= 653.9kbits/frame= 446 fps= 44 q=26.0 size= 1033kB time=00:00:12.90 bitrate= 656.2kbits/frame= 462 fps= 43 q=29.0 size= 1098kB time=00:00:13.43 bitrate= 669.7kbits/frame= 478 fps= 43 q=29.0 size= 1132kB time=00:00:13.96 bitrate= 664.2kbits/frame= 548 fps= 47 q=-1.0 Lsize= 1536kB time=00:00:18.16 bitrate= 692.8kbits/s speed=1.56x
video:1531kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 0.377405%
[libx264 @ 0x55c1d6bff0a0] frame I:115 Avg QP:18.12 size: 8204
[libx264 @ 0x55c1d6bff0a0] frame P:203 Avg QP:21.62 size: 1893
[libx264 @ 0x55c1d6bff0a0] frame B:230 Avg QP:21.99 size: 1039
[libx264 @ 0x55c1d6bff0a0] consecutive B-frames: 41.1% 6.6% 7.1% 45.3%
[libx264 @ 0x55c1d6bff0a0] mb I I16..4: 67.6% 32.3% 0.1%
[libx264 @ 0x55c1d6bff0a0] mb P I16..4: 15.3% 3.1% 0.0% P16..4: 28.6% 2.8% 2.0% 0.0% 0.0% skip:48.3%
[libx264 @ 0x55c1d6bff0a0] mb B I16..4: 0.8% 0.3% 0.0% B16..8: 26.2% 0.4% 0.0% direct:13.5% skip:58.7% L0:65.0% L1:34.5% BI: 0.5%
[libx264 @ 0x55c1d6bff0a0] 8x8 transform intra:28.4% inter:100.0%
[libx264 @ 0x55c1d6bff0a0] coded y,uvDC,uvAC intra: 15.0% 89.4% 53.1% inter: 2.6% 28.7% 0.2%
[libx264 @ 0x55c1d6bff0a0] i16 v,h,dc,p: 2% 49% 1% 47%
[libx264 @ 0x55c1d6bff0a0] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 6% 57% 19% 2% 1% 1% 4% 1% 9%
[libx264 @ 0x55c1d6bff0a0] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 16% 59% 18% 1% 2% 1% 2% 0% 1%
[libx264 @ 0x55c1d6bff0a0] i8c dc,h,v,p: 52% 17% 27% 4%
[libx264 @ 0x55c1d6bff0a0] Weighted P-Frames: Y:17.7% UV:6.9%
[libx264 @ 0x55c1d6bff0a0] ref P L0: 68.7% 0.7% 18.3% 10.6% 1.7%
[libx264 @ 0x55c1d6bff0a0] ref B L0: 86.1% 10.6% 3.3%
[libx264 @ 0x55c1d6bff0a0] ref B L1: 96.6% 3.4%
[libx264 @ 0x55c1d6bff0a0] kb/s:686.10`From the ffmpeg processes running on both ends, if you notice the number of B frames at the receiver is more than the B frames at the sender. In other cases that I tried, the number of I as well as P frames are higher at the receiver than that at the sender.
Can anyone please tell me why is it so ? I am not able to figure out why. -
Displaying the current frame of a video after skipping using drawtext/start_number not evaluation any variables
30 mars 2017, par DJ QuardaboffI would like to display the current frame number on a video while playing it with ffplay. I have already seen this solution, but when I seek to any part of the video, the counter resets. There’s a variable,
start_number
, which the ffplay documentation says isThe starting frame number for the n/frame_num variable. The default value is "0".
It seems that n is set to that when starting the video or seeking between I-frames. I thought setting this variable to%{floor(t*60)}
would solve my problem, but after running this :ffplay -i "video.mp4" -vf drawtext="fontsize=30:box=1:boxcolor=white:fontcolor=black:fontfile=/Windows/Fonts/arial.ttf:start_number=floor(t*60):text=%{n}"
I got the following console output :
ffplay version N-84679-gd65b595 Copyright (c) 2003-2017 the FFmpeg developers
built with gcc 6.3.0 (GCC)
configuration: --enable-gpl --enable-version3 --enable-cuda --enable-cuvid --enable-d3d11va --enable-dxva2 --enable-libmfx --enable-nvenc --enable-avisynth --enable-bzlib --enable-fontconfig --enable-frei0r --enable-gnutls --enable-iconv --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libfreetype --enable-libgme --enable-libgsm --enable-libilbc --enable-libmodplug --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenh264 --enable-libopenjpeg --enable-libopus --enable-librtmp --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvo-amrwbenc --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxavs --enable-libxvid --enable-libzimg --enable-lzma --enable-zlib
libavutil 55. 51.100 / 55. 51.100
libavcodec 57. 86.103 / 57. 86.103
libavformat 57. 67.100 / 57. 67.100
libavdevice 57. 3.101 / 57. 3.101
libavfilter 6. 78.100 / 6. 78.100
libswscale 4. 3.101 / 4. 3.101
libswresample 2. 4.100 / 2. 4.100
libpostproc 54. 2.100 / 54. 2.100
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'video.mp4':= 0B f=0/0
Metadata:
major_brand : isom
minor_version : 512
compatible_brands: isomiso2avc1mp41
creation_time : 2017-03-30T02:49:20.000000Z
encoder : Open Broadcaster Software v0.659b
Duration: 00:05:36.85, start: 0.000000, bitrate: 72636 kb/s
Stream #0:0(eng): Audio: aac (LC) (mp4a / 0x6134706D), 44100 Hz, stereo, fltp, 162 kb/s (default)
Metadata:
creation_time : 2017-03-30T02:49:20.000000Z
handler_name : Sound Media Handler
Stream #0:1(und): Video: h264 (Constrained Baseline) (avc1 / 0x31637661), yuv420p(tv, bt709/bt709/iec61966-2-1), 2560x1440, 72465 kb/s, 60 fps, 60 tbr, 1k tbn, 120 tbc (default)
Metadata:
creation_time : 2017-03-30T02:49:20.000000Z
handler_name : Video Media Handler
encoder : AVC Coding
[drawtext @ 00000000122770e0] [Eval @ 0000000008f3eb60] Undefined constant or missing '(' in 't*60)'
[drawtext @ 00000000122770e0] Unable to parse option value "floor(t*60)"
[drawtext @ 00000000122770e0] [Eval @ 0000000008f3ebd0] Undefined constant or missing '(' in 't*60)'
[drawtext @ 00000000122770e0] Unable to parse option value "floor(t*60)"
[drawtext @ 00000000122770e0] Error setting option start_number to value floor(t*60).
[Parsed_drawtext_0 @ 000000000263eca0] Error applying options to the filter.
Error initializing filter 'drawtext' with args 'fontsize=30:box=1:boxcolor=white:fontcolor=black:fontfile=/Windows/Fonts/arial.ttf:start_number=floor(t*60):text=%{n}'
0.01 A-V: nan fd= 0 aq= 22KB vq= 5866KB sq= 0B f=0/0In fact, any variable in
start_number
’s assignment invokes this error. I don’t know if I have the correct syntax, but does this mean it doesn’t evaluate expressions ? Or maybe it doesn’t accept variables for some reason ?After that downer I tried just setting the text to
%{t}
, which played the video, but repeatedly gave this error and had no text in the top left corner :[Parsed_drawtext_0 @ 0000000003e54ea0] %{t} is not known 0B f=0/0
So does the current time variable just not work in drawtext ?
Is there another way to write the current frame on the video or even on the console window ?Using Windows 10 Enterprise and the latest build of ffplay for windows at this time.
-
ffmpeg streaming to youtube slow
1er avril 2017, par boygiandiI’m trying to send a video file to youtube as livestreaming. The stream command look like this
ffmpeg -re -i "/tmp/4745.mkv" -acodec aac -pix_fmt yuv420p -bufsize 6000k -vb 400k -maxrate 1500k -deinterlace -vcodec libx264 -preset fast -g 60 -r 30 -crf 1 -f flv "rtmp ://...."
The last line of output log look like this
[ sh : 2017-04-01 7:19:54 ]size= 242706kB time=00:21:08.11 bitrate=1567.9kbits/s speed=0.882x
As I understand, the speed=0.882x mean it send data to youtube slower than expected ( 1x mean streaming fine, lower mean buffering ). I tried to change some params of ffmpeg command, like change -preset fast to superfast, ultrafast : it faster but quality very bad and I still can’t control the out put speed. Sometime it’s 1x, sometime lower.
Note that I run more than 1 ffmpeg instants at the same time, it may problem of CPU, RAM or Network, I checked them all.- CPU 40% ( top command )
- RAM used 3Gb/7Gb
- Network upload Avg : 8.45 MBit/s ( Max Upload : 70.76 Mbit/s - speedtest )
So I don’t know what’s problem. Anyone can help ?