Recherche avancée

Médias (91)

Autres articles (59)

  • Installation en mode ferme

    4 février 2011, par

    Le mode ferme permet d’héberger plusieurs sites de type MediaSPIP en n’installant qu’une seule fois son noyau fonctionnel.
    C’est la méthode que nous utilisons sur cette même plateforme.
    L’utilisation en mode ferme nécessite de connaïtre un peu le mécanisme de SPIP contrairement à la version standalone qui ne nécessite pas réellement de connaissances spécifique puisque l’espace privé habituel de SPIP n’est plus utilisé.
    Dans un premier temps, vous devez avoir installé les mêmes fichiers que l’installation (...)

  • Multilang : améliorer l’interface pour les blocs multilingues

    18 février 2011, par

    Multilang est un plugin supplémentaire qui n’est pas activé par défaut lors de l’initialisation de MediaSPIP.
    Après son activation, une préconfiguration est mise en place automatiquement par MediaSPIP init permettant à la nouvelle fonctionnalité d’être automatiquement opérationnelle. Il n’est donc pas obligatoire de passer par une étape de configuration pour cela.

  • HTML5 audio and video support

    13 avril 2011, par

    MediaSPIP uses HTML5 video and audio tags to play multimedia files, taking advantage of the latest W3C innovations supported by modern browsers.
    The MediaSPIP player used has been created specifically for MediaSPIP and can be easily adapted to fit in with a specific theme.
    For older browsers the Flowplayer flash fallback is used.
    MediaSPIP allows for media playback on major mobile platforms with the above (...)

Sur d’autres sites (10333)

  • How do I know ffmpeg-php is installed ?

    18 juillet 2014, par Rob Avery IV

    I just followed the instructions from this link on how to install ffmpeg-php on my dedicated server : http://www.ndchost.com/wiki/server-administration/install-ffmpeg

    At the bottom, it says to run the command php -i|grep ffmpeg and if it outputs the following lines then it is installed :

    ffmpegffmpeg support (ffmpeg-php) => enabled
    
ffmpeg-php version => 0.6.0
    
ffmpeg.allow_persistent => 0 => 0

    When I run it, it gives me this :

    ffmpeg
    
ffmpeg-php version => 0.6.0-svn
    
ffmpeg-php built on => Jul 18 2014 08:46:12
    
ffmpeg-php gd support  => enabled
    
ffmpeg libavcodec version => Lavc52.108.0
    
ffmpeg libavformat version => Lavf52.93.0
    
ffmpeg swscaler version => SwS0.12.0
    
ffmpeg.allow_persistent => 0 => 0
    
ffmpeg.show_warnings => 0 => 0
    
PWD => /usr/local/src/ffmpeg-php-0.6.0
    
_SERVER["PWD"] => /usr/local/src/ffmpeg-php-0.6.0
    
_ENV["PWD"] => /usr/local/src/ffmpeg-php-0.6.0

    I got 2/3 lines, but the one is not character-for-character the same.

    Is ffmpegffmpeg support (ffmpeg-php) => enabled the same as ffmpegffmpeg support (ffmpeg-php) => enabled in this context ?

    EDIT :
    Running this command ffmpeg -version gives me this result :

    FFmpeg version SVN-r26402, Copyright (c) 2000-2011 the FFmpeg developers
    
  built on Jul 18 2014 08:41:45 with gcc 4.4.7 20120313 (Red Hat 4.4.7-3)
    
  configuration: --enable-libmp3lame --disable-mmx --enable-shared
    
  libavutil     50.36. 0 / 50.36. 0
    
  libavcore      0.16. 1 /  0.16. 1
    
  libavcodec    52.108. 0 / 52.108. 0
    
  libavformat   52.93. 0 / 52.93. 0
    
  libavdevice   52. 2. 3 / 52. 2. 3
    
  libavfilter    1.74. 0 /  1.74. 0
    
  libswscale     0.12. 0 /  0.12. 0
    
FFmpeg SVN-r26402
    
libavutil     50.36. 0 / 50.36. 0
    
libavcore      0.16. 1 /  0.16. 1
    
libavcodec    52.108. 0 / 52.108. 0
    
libavformat   52.93. 0 / 52.93. 0
    
libavdevice   52. 2. 3 / 52. 2. 3
    
libavfilter    1.74. 0 /  1.74. 0
    
libswscale     0.12. 0 /  0.12. 0

  • Cannot get JACK Audio/Netjack working over LAN

    23 juin 2020, par James

    I'm trying to stream low latency audio between 2 raspberry pis. Both gstreamer and ffmpeg induce 2+ second delays for me.

    



    I've played around with Jack Audio and locally on a single pi it seems promising. I can route mic input to a speaker locally and it is almost instantaneous.

    



    However, I have been having trouble getting it to route between devices using Netjack.

    



    # ON SERVER
jackd -P70 -p16 -t2000 -dalsa -dhw:1 -p128 -n3 -r44100 -s 

# ON CLIENT
jackd -v -R -P70 -dnetone -i1 -o1 -I0 -O0  -r44100 -p128 -n3

# ON SERVER
jack_netsource -H < ip address of client >
jack_lsp # list availible connection ports

>system:capture_1
>system:playback_1
>system:playback_2
>netjack:capture_1
>netjack:capture_2
>netjack:capture_3
>netjack:playback_1
>netjack:playback_2
>netjack:playback_3

jack_connect system:capture_1 system:playback_1 # this works
jack_connect system:capture_1 netjack:playback_1 # this doesn't work :(


    



    Most of the launch options I pulled from here http://wiki.linuxaudio.org/wiki/raspberrypi#using_jack. I'll be honest I don't really know what they do.

    



    The client jackd output shows messages like

    



    Jack: data not valid
Jack: data not valid
Jack: JackSocketServerChannel::Execute : fPollTable i = 1 fd = 6
Jack: JackRequest::Notification
Jack: JackEngine::ClientNotify: no callback for notification = 3
Jack: JackEngine::ClientNotify: no callback for notification = 3
netxruns... duration: 139ms
Jack: JackSocketServerChannel::Execute : fPollTable i = 1 fd = 6
Jack: JackRequest::Notification
Jack: JackEngine::ClientNotify: no callback for notification = 3
Jack: JackEngine::ClientNotify: no callback for notification = 3


    



    And the server jack_netsource output looks like

    



    current latency 114
current latency 20
current latency 27
current latency 29
current latency 48
current latency 23
current latency 33
current latency 28
current latency 41
current latency 84
current latency 44


    



    and the server jackd output looks like

    



    JackAudioDriver::ProcessGraphAsyncMaster: Process error
JackAudioDriver::ProcessGraphAsyncMaster: Process error
JackAudioDriver::ProcessGraphAsyncMaster: Process error
JackAudioDriver::ProcessGraphAsyncMaster: Process error
JackEngine::XRun: client = netjack was not finished, state = Triggered
JackAudioDriver::ProcessGraphAsyncMaster: Process error
JackAudioDriver::ProcessGraphAsyncMaster: Process error
JackEngine::XRun: client = netjack was not finished, state = Triggered
JackEngine::XRun: client = netjack was not finished, state = Triggered


    



    I believe the -dnetone flag indicates to use Netjack2. Netjack 1, which I've tried with the -dnet flag results in a single Not Connected message from jack_netsource and :

    



    Jack: CatchHost fd = 5 err = Resource temporarily unavailable
Jack: CatchHost fd = 5 err = Resource temporarily unavailable
Jack: CatchHost fd = 5 err = Resource temporarily unavailable
Jack: CatchHost fd = 5 err = Resource temporarily unavailable
Jack: CatchHost fd = 5 err = Resource temporarily unavailable
Jack: JackSocketServerChannel::Execute : fPollTable i = 1 fd = 6


    



    from the client jackd.

    


  • Cannot get JACK Audio/Netjack working over LAN

    19 septembre 2016, par James

    I’m trying to stream low latency audio between 2 raspberry pis. Both gstreamer and ffmpeg induce 2+ second delays for me.

    I’ve played around with Jack Audio and locally on a single pi it seems promising. I can route mic input to a speaker locally and it is almost instantaneous.

    However, I have been having trouble getting it to route between devices using Netjack.

    # ON SERVER
    
jackd -P70 -p16 -t2000 -dalsa -dhw:1 -p128 -n3 -r44100 -s 
    

    
# ON CLIENT
    
jackd -v -R -P70 -dnetone -i1 -o1 -I0 -O0  -r44100 -p128 -n3
    

    
# ON SERVER
    
jack_netsource -H < ip address of client >
    
jack_lsp # list availible connection ports
    

    
>system:capture_1
    
>system:playback_1
    
>system:playback_2
    
>netjack:capture_1
    
>netjack:capture_2
    
>netjack:capture_3
    
>netjack:playback_1
    
>netjack:playback_2
    
>netjack:playback_3
    

    
jack_connect system:capture_1 system:playback_1 # this works
    
jack_connect system:capture_1 netjack:playback_1 # this doesn't work :(

    Most of the launch options I pulled from here http://wiki.linuxaudio.org/wiki/raspberrypi#using_jack. I’ll be honest I don’t really know what they do.

    The client jackd output shows messages like

    Jack: data not valid
    
Jack: data not valid
    
Jack: JackSocketServerChannel::Execute : fPollTable i = 1 fd = 6
    
Jack: JackRequest::Notification
    
Jack: JackEngine::ClientNotify: no callback for notification = 3
    
Jack: JackEngine::ClientNotify: no callback for notification = 3
    
netxruns... duration: 139ms
    
Jack: JackSocketServerChannel::Execute : fPollTable i = 1 fd = 6
    
Jack: JackRequest::Notification
    
Jack: JackEngine::ClientNotify: no callback for notification = 3
    
Jack: JackEngine::ClientNotify: no callback for notification = 3

    And the server jack_netsource output looks like

    current latency 114
    
current latency 20
    
current latency 27
    
current latency 29
    
current latency 48
    
current latency 23
    
current latency 33
    
current latency 28
    
current latency 41
    
current latency 84
    
current latency 44

    and the server jackd output looks like

    JackAudioDriver::ProcessGraphAsyncMaster: Process error
    
JackAudioDriver::ProcessGraphAsyncMaster: Process error
    
JackAudioDriver::ProcessGraphAsyncMaster: Process error
    
JackAudioDriver::ProcessGraphAsyncMaster: Process error
    
JackEngine::XRun: client = netjack was not finished, state = Triggered
    
JackAudioDriver::ProcessGraphAsyncMaster: Process error
    
JackAudioDriver::ProcessGraphAsyncMaster: Process error
    
JackEngine::XRun: client = netjack was not finished, state = Triggered
    
JackEngine::XRun: client = netjack was not finished, state = Triggered

    I believe the -dnetone flag indicates to use Netjack2. Netjack 1, which I’ve tried with the -dnet flag results in a single Not Connected message from jack_netsource and :

    Jack: CatchHost fd = 5 err = Resource temporarily unavailable
    
Jack: CatchHost fd = 5 err = Resource temporarily unavailable
    
Jack: CatchHost fd = 5 err = Resource temporarily unavailable
    
Jack: CatchHost fd = 5 err = Resource temporarily unavailable
    
Jack: CatchHost fd = 5 err = Resource temporarily unavailable
    
Jack: JackSocketServerChannel::Execute : fPollTable i = 1 fd = 6

    from the client jackd.

Navigation