Recherche avancée

Sur d’autres sites (6575)

• "Error opening input" error when running ffmpeg via shell script

  15 octobre 2024, par Roni Yaniv

  I'm on a macbook running sonoma 14.7.

  


  I have the following ffmpeg command which runs just fine by itself in the same folder of the files I need to modify :

  


  ffmpeg -i "water-stream-90fps.mp4" -vf "drawtext=text='Frame\: %{frame_num}': start_number=1: x=(w-text_w): y=(h-text_h):fontsize=(h*10/100):fontcolor=yellow,drawtext=text='%{pts\:hms}':x=0:y=0:fontsize=(h*10/100):fontcolor=yellow" "water-stream-90fps-with-markers.mp4"

  


  However, when I try to use it in a shell script by running ./add_markers.sh in the same folder, I get an error.

  


  This is the add_markers.sh script :

  


  #!/bin/bash

# Replace '/path/to/your/folder' with the actual path to your folder
folder=$(pwd)

# Replace 'ffmpeg -i input.mp4 -vf scale=640:480 output.mp4' with your desired FFmpeg command
ffmpeg_command="ffmpeg -i input.mp4 -vf \"drawtext=text='Frame\: %{frame_num}': start_number=1: x=(w-text_w): y=(h-text_h):fontsize=(h*10/100):fontcolor=yellow,drawtext=text='%{pts\:hms}':x=0:y=0:fontsize=(h*10/100):fontcolor=yellow\" output.mp4"

echo "$ffmpeg_command"

# Loop through all files in the folder and execute the FFmpeg command

for file in "$folder"/*; do
    filename=$(basename "${file%.*}") #get only the first part of the file name without path or extension

    # Replace 'input.mp4' with the current filename and 'output.mp4' with the new filename. 
    # Added double quotes to manage filenames with spaces.
    new_command="${ffmpeg_command//input.mp4/\"$filename.mp4\"}"
    new_command="${new_command//output.mp4/\"$filename-with-markers.mp4\"}"

    echo "Running $new_command"

    $new_command

done


  


  This is the error I get (for one of the files, same error for all of them) :

  


  Running ffmpeg -i "water-stream-90fps.mp4" -vf "drawtext=text='Frame\: %{frame_num}': start_number=1: x=(w-text_w): y=(h-text_h):fontsize=(h*10/100):fontcolor=yellow,drawtext=text='%{pts\:hms}':x=0:y=0:fontsize=(h*10/100):fontcolor=yellow" "water-stream-90fps-with-markers.mp4"
ffmpeg version 7.0 Copyright (c) 2000-2024 the FFmpeg developers
  built with Apple clang version 15.0.0 (clang-1500.3.9.4)
  configuration: --prefix=/opt/homebrew/Cellar/ffmpeg/7.0 --enable-shared --enable-pthreads --enable-version3 --cc=clang --host-cflags= --host-ldflags='-Wl,-ld_classic' --enable-ffplay --enable-gnutls --enable-gpl --enable-libaom --enable-libaribb24 --enable-libbluray --enable-libdav1d --enable-libharfbuzz --enable-libjxl --enable-libmp3lame --enable-libopus --enable-librav1e --enable-librist --enable-librubberband --enable-libsnappy --enable-libsrt --enable-libssh --enable-libsvtav1 --enable-libtesseract --enable-libtheora --enable-libvidstab --enable-libvmaf --enable-libvorbis --enable-libvpx --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxml2 --enable-libxvid --enable-lzma --enable-libfontconfig --enable-libfreetype --enable-frei0r --enable-libass --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libopenvino --enable-libspeex --enable-libsoxr --enable-libzmq --enable-libzimg --disable-libjack --disable-indev=jack --enable-videotoolbox --enable-audiotoolbox --enable-neon
  libavutil      59.  8.100 / 59.  8.100
  libavcodec     61.  3.100 / 61.  3.100
  libavformat    61.  1.100 / 61.  1.100
  libavdevice    61.  1.100 / 61.  1.100
  libavfilter    10.  1.100 / 10.  1.100
  libswscale      8.  1.100 /  8.  1.100
  libswresample   5.  1.100 /  5.  1.100
  libpostproc    58.  1.100 / 58.  1.100
[in#0 @ 0x6000015bc300] Error opening input: No such file or directory
Error opening input file "water-stream-90fps.mp4".
Error opening input files: No such file or directory


  


  I tried all kinds of things but my brain is starting to swell. Any guidance/help would be appreciated.

  


• ffmpeg unable to get duration/bitrate of remote gif

  17 février, par Peter Xia

  I'm trying to get the duration of a gif.

  


  The command ffmpeg -i https://cdn.7tv.app/emote/01F6MZGCNG000255K4X1K7NTHR/4x.gif

  


  gives
Duration: N/A, start: 0.000000, bitrate: N/A

  


  However if i download the file and pass it in
ffmpeg -i 4x.gif

  


  it gives :
Duration: 00:00:07.92, start: 0.000000, bitrate: 1225 kb/s

  


  The issue seems limited only to gifs on 7tv site.

  


  

  • It works for other sites. (example : ffmpeg -i https://c.tenor.com/ULCY5B996-oAAAAd/tenor.gif).

  


  • It also works for other encodings of that image (exmaple ffmpeg -i https://cdn.7tv.app/emote/01F6MZGCNG000255K4X1K7NTHR/4x.avif)

  


  


  Here is the HTTP response header from 7tv site of that gif :

  


  HTTP/2 200 
content-type: image/gif
content-length: 1213725
x-7tv-cache-hits: 37527
x-7tv-cache: hit
age: 228365
cache-control: public, max-age=604800, s-maxage=86400, immutable
alt-svc: h3=":443"; ma=2592000
x-7tv-cdn-pod: cdn-ssprq
x-7tv-cdn-node: cdn-1
server: SevenTV
vary: origin, access-control-request-method, access-control-request-headers
access-control-allow-origin: *
access-control-expose-headers: *
date: Sun, 16 Feb 2025 20:47:28 GMT


  


  Can someone help me understand ? Something spcecific to this site is causing ffmpeg to behave differently ?

  


• Moviepy is unable to load video

  20 octobre 2024, par Alex

  Using python 3.11.10 and moviepy 1.0.3 on ubuntu 24.04.1 (in a VirtualBox 7.1.3 on windows 10) I have problems to load a video clip. The test code is just

  


  from moviepy.editor import VideoFileClip
clip = VideoFileClip("testvideo.ts")


  


  but the error is

  


  Traceback (most recent call last):&#xA;  File "/home/alex/.cache/pypoetry/virtualenvs/pypdzug-WqasAXAr-py3.11/lib/python3.11/site-packages/moviepy/video/io/ffmpeg_reader.py", line 285, in ffmpeg_parse_infos&#xA;    line = [l for l in lines if keyword in l][index]&#xA;           ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^&#xA;IndexError: list index out of range&#xA;&#xA;During handling of the above exception, another exception occurred:&#xA;&#xA;Traceback (most recent call last):&#xA;  File "/home/alex/Repos/pypdzug/tester.py", line 5, in <module>&#xA;    clip = VideoFileClip("testvideo.ts")&#xA;           ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^&#xA;  File "/home/alex/.cache/pypoetry/virtualenvs/pypdzug-WqasAXAr-py3.11/lib/python3.11/site-packages/moviepy/video/io/VideoFileClip.py", line 88, in __init__&#xA;    self.reader = FFMPEG_VideoReader(filename, pix_fmt=pix_fmt,&#xA;                  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^&#xA;  File "/home/alex/.cache/pypoetry/virtualenvs/pypdzug-WqasAXAr-py3.11/lib/python3.11/site-packages/moviepy/video/io/ffmpeg_reader.py", line 35, in __init__&#xA;    infos = ffmpeg_parse_infos(filename, print_infos, check_duration,&#xA;            ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^&#xA;  File "/home/alex/.cache/pypoetry/virtualenvs/pypdzug-WqasAXAr-py3.11/lib/python3.11/site-packages/moviepy/video/io/ffmpeg_reader.py", line 289, in ffmpeg_parse_infos&#xA;    raise IOError(("MoviePy error: failed to read the duration of file %s.\n"&#xA;OSError: MoviePy error: failed to read the duration of file testvideo.ts.&#xA;Here are the file infos returned by ffmpeg:&#xA;&#xA;ffmpeg version 4.2.2-static https://johnvansickle.com/ffmpeg/  Copyright (c) 2000-2019 the FFmpeg developers&#xA;  built with gcc 8 (Debian 8.3.0-6)&#xA;  configuration: --enable-gpl --enable-version3 --enable-static --disable-debug --disable-ffplay --disable-indev=sndio --disable-outdev=sndio --cc=gcc --enable-fontconfig --enable-frei0r --enable-gnutls --enable-gmp --enable-libgme --enable-gray --enable-libaom --enable-libfribidi --enable-libass --enable-libvmaf --enable-libfreetype --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-librubberband --enable-libsoxr --enable-libspeex --enable-libsrt --enable-libvorbis --enable-libopus --enable-libtheora --enable-libvidstab --enable-libvo-amrwbenc --enable-libvpx --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxml2 --enable-libdav1d --enable-libxvid --enable-libzvbi --enable-libzimg&#xA;  libavutil      56. 31.100 / 56. 31.100&#xA;  libavcodec     58. 54.100 / 58. 54.100&#xA;  libavformat    58. 29.100 / 58. 29.100&#xA;  libavdevice    58.  8.100 / 58.  8.100&#xA;  libavfilter     7. 57.100 /  7. 57.100&#xA;  libswscale      5.  5.100 /  5.  5.100&#xA;  libswresample   3.  5.100 /  3.  5.100&#xA;  libpostproc    55.  5.100 / 55.  5.100&#xA;</module>

  


  It says it failed to read the duration of the file, but the file plays properly (with mplayer) and ffmpeg -i testvideo.ts returns

  


  ffmpeg version 6.1.1-3ubuntu5 Copyright (c) 2000-2023 the FFmpeg developers
  built with gcc 13 (Ubuntu 13.2.0-23ubuntu3)
  configuration: --prefix=/usr --extra-version=3ubuntu5 --toolchain=hardened --libdir=/usr/lib/x86_64-linux-gnu --incdir=/usr/include/x86_64-linux-gnu --arch=amd64 --enable-gpl --disable-stripping --disable-omx --enable-gnutls --enable-libaom --enable-libass --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libdav1d --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libglslang --enable-libgme --enable-libgsm --enable-libharfbuzz --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzimg --enable-openal --enable-opencl --enable-opengl --disable-sndio --enable-libvpl --disable-libmfx --enable-libdc1394 --enable-libdrm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-ladspa --enable-libbluray --enable-libjack --enable-libpulse --enable-librabbitmq --enable-librist --enable-libsrt --enable-libssh --enable-libsvtav1 --enable-libx264 --enable-libzmq --enable-libzvbi --enable-lv2 --enable-sdl2 --enable-libplacebo --enable-librav1e --enable-pocketsphinx --enable-librsvg --enable-libjxl --enable-shared
  libavutil      58. 29.100 / 58. 29.100
  libavcodec     60. 31.102 / 60. 31.102
  libavformat    60. 16.100 / 60. 16.100
  libavdevice    60.  3.100 / 60.  3.100
  libavfilter     9. 12.100 /  9. 12.100
  libswscale      7.  5.100 /  7.  5.100
  libswresample   4. 12.100 /  4. 12.100
  libpostproc    57.  3.100 / 57.  3.100
Input #0, mpegts, from 'testvideo.ts':
  Duration: 00:10:10.13, start: 0.133333, bitrate: 3256 kb/s
  Program 1 
    Metadata:
      service_name    : 2024-10-04 11:49:49.917
      service_provider: gvos-6.0
  Stream #0:0[0x100]: Video: h264 (High) ([27][0][0][0] / 0x001B), yuv420p(progressive), 1920x1080, 15 fps, 15 tbr, 90k tbn


  


  Here the duration is clearly given to be 10 minutes and 10.13 seconds. So what could be the cause of this error/issue ?