Recherche avancée

Sur d’autres sites (5437)

• Cannot duplicate virtual camera on Orange Pi 5B [closed]

  21 janvier 2024, par Denis Kotov

  I have faced with the issue that I cannot duplicate virtual camera for SkyDroid 5.8GHz OTG Receiver on Orange Pi 5B :

  


  orangepi@orangepi-desktop:~$ gst-launch-1.0 v4l2src device=/dev/video0 ! xvimagesink device=/dev/video2

Setting pipeline to PAUSED ...
ERROR: from element /GstPipeline:pipeline0/GstXvImageSink:xvimagesink0: Could not initialise Xv output
Additional debug info:
../sys/xvimage/xvimagesink.c(1806): gst_xv_image_sink_open (): /GstPipeline:pipeline0/GstXvImageSink:xvimagesink0:
Could not open display (null)
ERROR: pipeline doesn't want to preroll.
Failed to set pipeline to PAUSED.
Setting pipeline to NULL ...
Freeing pipeline ...

orangepi@orangepi-desktop:~$ gst-launch-1.0 v4l2src device=/dev/video0 ! v4l2sink device=/dev/video2

Setting pipeline to PAUSED ...
ERROR: from element /GstPipeline:pipeline0/GstV4l2Sink:v4l2sink0: Cannot identify device '/dev/video2'.
Additional debug info:
../sys/v4l2/v4l2_calls.c(608): gst_v4l2_open (): /GstPipeline:pipeline0/GstV4l2Sink:v4l2sink0:
system error: No such file or directory
ERROR: pipeline doesn't want to preroll.
Failed to set pipeline to PAUSED.
Setting pipeline to NULL ...
Freeing pipeline ...


  


  Also I tried to duplicate video camera using ffmpeg :

  


  orangepi@orangepi-desktop:~$ sudo ffmpeg -f video4linux2 -i /dev/video0 -codec copy -f v4l2 /dev/video2

ffmpeg version 6.0-5+git230804.e243e8d001~j1 Copyright (c) 2000-2023 the FFmpeg developers
  built with gcc 11 (Ubuntu 11.4.0-1ubuntu1~22.04)
  configuration: --prefix=/usr --extra-version='5+git230804.e243e8d001~j1' --toolchain=hardened --libdir=/usr/lib/aarch64-linux-gnu --incdir=/usr/include/aarch64-linux-gnu --arch=arm64 --enable-gpl --disable-stripping --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libdav1d --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libglslang --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librabbitmq --enable-librist --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libsrt --enable-libssh --enable-libsvtav1 --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzimg --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opencl --enable-opengl --enable-version3 --enable-rkmpp --enable-sdl2 --disable-sndio --enable-pocketsphinx --enable-librsvg --enable-libdc1394 --enable-libdrm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --enable-libplacebo --enable-shared
  libavutil      58.  2.100 / 58.  2.100
  libavcodec     60.  3.100 / 60.  3.100
  libavformat    60.  3.100 / 60.  3.100
  libavdevice    60.  1.100 / 60.  1.100
  libavfilter     9.  3.100 /  9.  3.100
  libswscale      7.  1.100 /  7.  1.100
  libswresample   4. 10.100 /  4. 10.100
  libpostproc    57.  1.100 / 57.  1.100
[mjpeg @ 0xaaab04104190] EOI missing, emulating
Input #0, video4linux2,v4l2, from '/dev/video0':
  Duration: N/A, start: 3317.330868, bitrate: N/A
  Stream #0:0: Video: mjpeg (Baseline), yuvj422p(pc, bt470bg/unknown/unknown), 640x480, 30 fps, 30 tbr, 1000k tbn
[video4linux2,v4l2 @ 0xaaab04105750] Unable to open V4L2 device '/dev/video2'
[out#0/video4linux2,v4l2 @ 0xaaab040b9200] Could not write header (incorrect codec parameters ?): No such file or directory
[vost#0:0/copy @ 0xaaab04107640] Error initializing output stream: 
Stream mapping:
  Stream #0:0 -> #0:0 (copy)
    Last message repeated 1 times
[video4linux2,v4l2 @ 0xaaab041039d0] Some buffers are still owned by the caller on close.
ioctl(VIDIOC_QBUF): Bad file descriptor


  


  But it also did not work ...

  


  The reason I want it, because I try to have additional processing using OpenCV but the camera is opened by another application, and it is not possible to similtuniuously open camera in 2 applications at the same time ...

  


  Have somebody faced with similar issue ?

  


• ffmpeg - store desired output to python variable

  15 janvier 2024, par Chris P

  If i run : ffmpeg -list_devices true -f dshow -i dummy i get :

  


  ffmpeg version 2023-01-30-git-2d202985b7-full_build-www.gyan.dev Copyright (c) 2000-2023 the FFmpeg developers
  built with gcc 12.2.0 (Rev10, Built by MSYS2 project)
  configuration: --enable-gpl --enable-version3 --enable-static --disable-w32threads --disable-autodetect --enable-fontconfig --enable-iconv --enable-gnutls --enable-libxml2 --enable-gmp --enable-bzlib --enable-lzma --enable-libsnappy --enable-zlib --enable-librist --enable-libsrt --enable-libssh --enable-libzmq --enable-avisynth --enable-libbluray --enable-libcaca --enable-sdl2 --enable-libaribb24 --enable-libdav1d --enable-libdavs2 --enable-libuavs3d --enable-libzvbi --enable-librav1e --enable-libsvtav1 --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxavs2 --enable-libxvid --enable-libaom --enable-libjxl --enable-libopenjpeg --enable-libvpx --enable-mediafoundation --enable-libass --enable-frei0r --enable-libfreetype --enable-libfribidi --enable-liblensfun --enable-libvidstab --enable-libvmaf --enable-libzimg --enable-amf --enable-cuda-llvm --enable-cuvid --enable-ffnvcodec --enable-nvdec --enable-nvenc --enable-d3d11va --enable-dxva2 --enable-libvpl --enable-libshaderc --enable-vulkan --enable-libplacebo --enable-opencl --enable-libcdio --enable-libgme --enable-libmodplug --enable-libopenmpt --enable-libopencore-amrwb --enable-libmp3lame --enable-libshine --enable-libtheora --enable-libtwolame --enable-libvo-amrwbenc --enable-libilbc --enable-libgsm --enable-libopencore-amrnb --enable-libopus --enable-libspeex --enable-libvorbis --enable-ladspa --enable-libbs2b --enable-libflite --enable-libmysofa --enable-librubberband --enable-libsoxr --enable-chromaprint
  libavutil      57. 44.100 / 57. 44.100
  libavcodec     59. 59.100 / 59. 59.100
  libavformat    59. 36.100 / 59. 36.100
  libavdevice    59.  8.101 / 59.  8.101
  libavfilter     8. 56.100 /  8. 56.100
  libswscale      6.  8.112 /  6.  8.112
  libswresample   4.  9.100 /  4.  9.100
  libpostproc    56.  7.100 / 56.  7.100
[dshow @ 00000236357d0480] "HP True Vision HD Camera" (video)
[dshow @ 00000236357d0480]   Alternative name "@device_pnp_\\?\usb#vid_04f2&pid_b6ab&mi_00#6&763f234&2&0000#{65e8773d-8f56-11d0-a3b9-00a0c9223196}\global"
[dshow @ 00000236357d0480] "Microphone Array (Intel® Smart Sound Technology for Digital Microphones)" (audio)
[dshow @ 00000236357d0480]   Alternative name "@device_cm_{33D9A762-90C8-11D0-BD43-00A0C911CE86}\wave_{E8824DE9-F848-47F1-BB2A-EB24E11050FC}"
dummy: Immediate exit requested


  


  From this output i want to store : "HP True Vision HD Camera" (first video output) in a python variable.

  


  Is this possible ?

  


  I am trying

  


  import subprocess
ffmpeg_command = ["ffmpeg", "-list_devices", "true","-f", "dshow", "-i", "dummy"]
pipe = subprocess.run(ffmpeg_command,stdout=subprocess.PIPE,stderr=subprocess.PIPE,bufsize=10**8)
output = pipe.stdout
lines = output.splitlines()
for line in lines:
    if line.startswith("[dshow @"):
        if "(video)" in line:
            camera_info = line.split("\"")[1]
            print(camera_info)


  


• ffmpeg - converting one audio track of a multi-track mp4

  30 décembre 2023, par Shaun.M

  I'm having a few mp4 with two audio tracks,
an english one in aac and a french one in dts.

  


  Now I want to convert only the french dts to eac3 with a single ffmpeg command.

  


  I use

  


  ffmpeg -hide_banner -i input.mp4 ^
             -map_metadata -1 ^
             -map 0:0 -c:v copy ^
             -map 0:1 -c:a copy ^
             -map 0:2 -c:a eac3 -b:a 1536k ^
             -metadata:s:a:0 language=eng ^
             -metadata:s:a:0 title="Stereo" ^
             -metadata:s:a:1 language=fra ^
             -metadata:s:a:1 title="Stereo" ^
output.mp4


  


  This works quite nice, but it converts both audio tracks to eac3, instead of leaving the first one untouched ...
What's wrong in the command ?

  


  (ffmpeg version 2023-12-23-git-f5f414d9c4-full_build-www.gyan.dev under Windows 10)