Recherche avancée

Médias (1)

Mot : - Tags -/MediaSPIP 0.2

Autres articles (13)

  • Supporting all media types

    13 avril 2011, par

    Unlike most software and media-sharing platforms, MediaSPIP aims to manage as many different media types as possible. The following are just a few examples from an ever-expanding list of supported formats : images : png, gif, jpg, bmp and more audio : MP3, Ogg, Wav and more video : AVI, MP4, OGV, mpg, mov, wmv and more text, code and other data : OpenOffice, Microsoft Office (Word, PowerPoint, Excel), web (html, CSS), LaTeX, Google Earth and (...)

  • Automated installation script of MediaSPIP

    25 avril 2011, par

    To overcome the difficulties mainly due to the installation of server side software dependencies, an "all-in-one" installation script written in bash was created to facilitate this step on a server with a compatible Linux distribution.
    You must have access to your server via SSH and a root account to use it, which will install the dependencies. Contact your provider if you do not have that.
    The documentation of the use of this installation script is available here.
    The code of this (...)

  • Script d’installation automatique de MediaSPIP

    25 avril 2011, par

    Afin de palier aux difficultés d’installation dues principalement aux dépendances logicielles coté serveur, un script d’installation "tout en un" en bash a été créé afin de faciliter cette étape sur un serveur doté d’une distribution Linux compatible.
    Vous devez bénéficier d’un accès SSH à votre serveur et d’un compte "root" afin de l’utiliser, ce qui permettra d’installer les dépendances. Contactez votre hébergeur si vous ne disposez pas de cela.
    La documentation de l’utilisation du script d’installation (...)

Sur d’autres sites (5950)

  • FFMPEG G711ulaw Rhythmic Distortion [closed]

    8 juillet 2024, par nsd123

    I am using ffmpeg take audio in from my microphone, rtp stream it to a multicast address as g711ulaw audio, and then play that audio through various devices.

    


    In my network I have other workstations, as well as a digital telephone type device.
My workstations are using Windows.

    


    I am taking the microphone input with this ffmpeg command :
ffmpeg -f dshow -i audio="" -pcm_mulaw -ab 64k -ac 1 -ar 8000 -f rtp rtp :// : ?localaddr=

    


    This command transmits the microphone data successfully to other workstations on the network, where I can use ffplay or other means to listen to the rtp stream and hear clear audio.

    


    On the telephone device, when it gets converted to analog to play, it's picking up this strange, rhythmic burp/clicking/noise, like every time its getting information, its interpreting the header as voice data or something.

    


    The output of the ffmpeg command says the pcm_s16le codec is the native one, and seems to convert it just fine.

    


    Is there any kind of option I should be using in my ffmpeg command that sounds like it could resolve this issue ? Or does this kind of interference typically occur for a specific reason ?

    


    Its not the hardware, I've tested that (other audio able to play clearly).
I've tried a few other codecs to no success.
I've tried a few ffmpeg options, but there are so many options, they've just been successful stabs in the dark

    


  • How do I stream audio from a mic in a raspberry pi with FFmpeg ?

    23 mars 2024, par Ignacio

    I'm trying to follow this to stream audio from a mic in my raspberry pi.

    


    ignacio@pi-satellite-bigbedroom:~ $ ffmpeg -re -f pulse -ac 1 -i plughw:CARD=seeed2micvoicec,DEV=0 -f rtsp -rtsp_transport tcp rtsp://192.168.86.151:8554/live.stream
ffmpeg version 4.3.6-0+deb11u1+rpt5 Copyright (c) 2000-2023 the FFmpeg developers
  built with gcc 10 (Debian 10.2.1-6)
  configuration: --prefix=/usr --extra-version=0+deb11u1+rpt5 --toolchain=hardened --incdir=/usr/include/aarch64-linux-gnu --enable-gpl --disable-stripping --enable-avresample --disable-filter=resample --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libdav1d --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librabbitmq --enable-librsvg --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libsrt --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opencl --enable-opengl --enable-sdl2 --disable-mmal --enable-neon --enable-v4l2-request --enable-libudev --enable-epoxy --enable-sand --libdir=/usr/lib/aarch64-linux-gnu --arch=arm64 --enable-pocketsphinx --enable-libdc1394 --enable-libdrm --enable-vout-drm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --enable-shared
  libavutil      56. 51.100 / 56. 51.100
  libavcodec     58. 91.100 / 58. 91.100
  libavformat    58. 45.100 / 58. 45.100
  libavdevice    58. 10.100 / 58. 10.100
  libavfilter     7. 85.100 /  7. 85.100
  libavresample   4.  0.  0 /  4.  0.  0
  libswscale      5.  7.100 /  5.  7.100
  libswresample   3.  7.100 /  3.  7.100
  libpostproc    55.  7.100 / 55.  7.100
plughw:CARD=seeed2micvoicec,DEV=0: No such process


    


    I believe this shows the cards I have :

    


    ignacio@pi-satellite-bigbedroom:~ $ pactl list sources
Source #0
    State: SUSPENDED
    Name: alsa_output.platform-bcm2835_audio.analog-stereo.monitor
    Description: Monitor of Built-in Audio Analog Stereo
    Driver: module-alsa-card.c
    Sample Specification: s16le 2ch 44100Hz
    Channel Map: front-left,front-right
    Owner Module: 4
    Mute: no
    Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
            balance 0.00
    Base Volume: 65536 / 100% / 0.00 dB
    Monitor of Sink: alsa_output.platform-bcm2835_audio.analog-stereo
    Latency: 0 usec, configured 0 usec
    Flags: DECIBEL_VOLUME LATENCY 
    Properties:
        device.description = "Monitor of Built-in Audio Analog Stereo"
        device.class = "monitor"
        alsa.card = "0"
        alsa.card_name = "bcm2835 Headphones"
        alsa.long_card_name = "bcm2835 Headphones"
        alsa.driver_name = "snd_bcm2835"
        device.bus_path = "platform-bcm2835_audio"
        sysfs.path = "/devices/platform/soc/3f00b840.mailbox/bcm2835_audio/sound/card0"
        device.form_factor = "internal"
        device.string = "0"
        module-udev-detect.discovered = "1"
        device.icon_name = "audio-card"
    Formats:
        pcm

Source #1
    State: IDLE
    Name: alsa_output.platform-soc_sound.stereo-fallback.monitor
    Description: Monitor of Built-in Audio Stereo
    Driver: module-alsa-card.c
    Sample Specification: s16le 2ch 44100Hz
    Channel Map: front-left,front-right
    Owner Module: 12
    Mute: no
    Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
            balance 0.00
    Base Volume: 65536 / 100% / 0.00 dB
    Monitor of Sink: alsa_output.platform-soc_sound.stereo-fallback
    Latency: 0 usec, configured 2000000 usec
    Flags: DECIBEL_VOLUME LATENCY 
    Properties:
        device.description = "Monitor of Built-in Audio Stereo"
        device.class = "monitor"
        alsa.card = "2"
        alsa.card_name = "seeed-2mic-voicecard"
        alsa.long_card_name = "seeed-2mic-voicecard"
        alsa.driver_name = "snd_soc_simple_card"
        device.bus_path = "platform-soc:sound"
        sysfs.path = "/devices/platform/soc/soc:sound/sound/card2"
        device.form_factor = "internal"
        device.string = "2"
        module-udev-detect.discovered = "1"
        device.icon_name = "audio-card"
    Formats:
        pcm

Source #2
    State: RUNNING
    Name: alsa_input.platform-soc_sound.stereo-fallback
    Description: Built-in Audio Stereo
    Driver: module-alsa-card.c
    Sample Specification: s16le 2ch 44100Hz
    Channel Map: front-left,front-right
    Owner Module: 12
    Mute: no
    Volume: front-left: 32845 /  50% / -18.00 dB,   front-right: 32845 /  50% / -18.00 dB
            balance 0.00
    Base Volume: 20724 /  32% / -30.00 dB
    Monitor of Sink: n/a
    Latency: 688 usec, configured 10000 usec
    Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY 
    Properties:
        alsa.resolution_bits = "16"
        device.api = "alsa"
        device.class = "sound"
        alsa.class = "generic"
        alsa.subclass = "generic-mix"
        alsa.name = "bcm2835-i2s-wm8960-hifi wm8960-hifi-0"
        alsa.id = "bcm2835-i2s-wm8960-hifi wm8960-hifi-0"
        alsa.subdevice = "0"
        alsa.subdevice_name = "subdevice #0"
        alsa.device = "0"
        alsa.card = "2"
        alsa.card_name = "seeed-2mic-voicecard"
        alsa.long_card_name = "seeed-2mic-voicecard"
        alsa.driver_name = "snd_soc_simple_card"
        device.bus_path = "platform-soc:sound"
        sysfs.path = "/devices/platform/soc/soc:sound/sound/card2"
        device.form_factor = "internal"
        device.string = "hw:2"
        device.buffering.buffer_size = "352800"
        device.buffering.fragment_size = "176400"
        device.access_mode = "mmap+timer"
        device.profile.name = "stereo-fallback"
        device.profile.description = "Stereo"
        device.description = "Built-in Audio Stereo"
        module-udev-detect.discovered = "1"
        device.icon_name = "audio-card"
    Ports:
        analog-input: Analog Input (type: Analog, priority: 10000, availability unknown)
    Active Port: analog-input
    Formats:
        pcm


    


    I want to use the mic from the seeed-2mic-voicecard.

    


    Thanks for the help

    


  • avcodec/decode : Set KEY flag+pict_type generically for intra-only codecs

    9 mai 2024, par Andreas Rheinhardt
    avcodec/decode : Set KEY flag+pict_type generically for intra-only codecs

    This commit is the analog of 3f11eac75741888c7b2b6f93c458766f2613bab5
    
for decoding : It sets the AV_FRAME_FLAG_KEY and (for video decoders)
    
also pict_type to AV_PICTURE_TYPE_I. It furthermore stops setting
    
audio frames as always being key frames — it is wrong for e.g.
    
TrueHD/MLP. The latter also affects TAK and DFPWM.
    

    The change already improves output for several decoders where
    
it has been forgotten to set e.g. pict_type like speedhq, wnv1
    
or tiff. The latter is the reason for the change to the exif-image-tiff
    
FATE test reference file.
    

    Signed-off-by : Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
    • [DH] libavcodec/decode.c
    • [DH] libavcodec/pthread_frame.c
    • [DH] tests/ref/fate/exif-image-tiff

Navigation