Recherche avancée

Sur d’autres sites (7562)

• TCP connection refused with FFMPEG

  2 février 2017, par Samul

  OFFICIAL EDIT :

  I thank you so much for your help but I am still encountering problems.

  My ffserver.conf file is like this :

  # Port on which the server is listening. You must select a different
  
  # port from your standard HTTP web server if it is running on the same
  
  # computer.
  
  HTTPPort 8090
  
  
  
  # Address on which the server is bound. Only useful if you have
  
  # several network interfaces.
  
  HTTPBindAddress 0.0.0.0
  
  
  
  # Number of simultaneous HTTP connections that can be handled. It has
  
  # to be defined *before* the MaxClients parameter, since it defines the
  
  # MaxClients maximum limit.
  
  MaxHTTPConnections 2000
  
  
  
  # Number of simultaneous requests that can be handled. Since FFServer
  
  # is very fast, it is more likely that you will want to leave this high
  
  # and use MaxBandwidth, below.
  
  MaxClients 1000
  
  
  
  # This the maximum amount of kbit/sec that you are prepared to
  
  # consume when streaming to clients.
  
  MaxBandwidth 1000
  
  
  
  # Access log file (uses standard Apache log file format)
  
  # '-' is the standard output.
  
  CustomLog -
  
  
  
  ##################################################################
  
  # Definition of the live feeds. Each live feed contains one video
  
  # and/or audio sequence coming from an ffmpeg encoder or another
  
  # ffserver. This sequence may be encoded simultaneously with several
  
  # codecs at several resolutions.
  
  
  
  <feed>
  
  
  
  # You must use 'ffmpeg' to send a live feed to ffserver. In this
  
  # example, you can type:
  
  #
  
  # ffmpeg http://localhost:8090/feed1.ffm
  
  
  
  # ffserver can also do time shifting. It means that it can stream any
  
  # previously recorded live stream. The request should contain:
  
  # "http://xxxx?date=[YYYY-MM-DDT][[HH:]MM:]SS[.m...]".You must specify
  
  # a path where the feed is stored on disk. You also specify the
  
  # maximum size of the feed, where zero means unlimited. Default:
  
  # File=/tmp/feed_name.ffm FileMaxSize=5M
  
  File /tmp/feed1.ffm
  
  FileMaxSize 200K
  
  
  
  # You could specify
  
  # ReadOnlyFile /saved/specialvideo.ffm
  
  # This marks the file as readonly and it will not be deleted or updated.
  
  
  
  # Specify launch in order to start ffmpeg automatically.
  
  # First ffmpeg must be defined with an appropriate path if needed,
  
  # after that options can follow, but avoid adding the http:// field
  
  #Launch ffmpeg
  
  
  
  # Only allow connections from localhost to the feed.
  
  #ACL allow 127.0.0.1
  
  #ACL allow 189.34.0.158
  
  </feed>
  
  
  
  
  
  ##################################################################
  
  # Now you can define each stream which will be generated from the
  
  # original audio and video stream. Each format has a filename (here
  
  # 'test1.mpg'). FFServer will send this stream when answering a
  
  # request containing this filename.
  
  
  
  <stream>
  
  
  
  # coming from live feed 'feed1'
  
  Feed feed1.ffm
  
  
  
  # Format of the stream : you can choose among:
  
  # mpeg       : MPEG-1 multiplexed video and audio
  
  # mpegvideo  : only MPEG-1 video
  
  # mp2        : MPEG-2 audio (use AudioCodec to select layer 2 and 3 codec)
  
  # ogg        : Ogg format (Vorbis audio codec)
  
  # rm         : RealNetworks-compatible stream. Multiplexed audio and video.
  
  # ra         : RealNetworks-compatible stream. Audio only.
  
  # mpjpeg     : Multipart JPEG (works with Netscape without any plugin)
  
  # jpeg       : Generate a single JPEG image.
  
  # asf        : ASF compatible streaming (Windows Media Player format).
  
  # swf        : Macromedia Flash compatible stream
  
  # avi        : AVI format (MPEG-4 video, MPEG audio sound)
  
  Format mpeg
  
  
  
  # Bitrate for the audio stream. Codecs usually support only a few
  
  # different bitrates.
  
  AudioBitRate 32
  
  
  
  # Number of audio channels: 1 = mono, 2 = stereo
  
  AudioChannels 1
  
  
  
  # Sampling frequency for audio. When using low bitrates, you should
  
  # lower this frequency to 22050 or 11025. The supported frequencies
  
  # depend on the selected audio codec.
  
  AudioSampleRate 44100
  
  
  
  # Bitrate for the video stream
  
  VideoBitRate 64
  
  
  
  # Ratecontrol buffer size
  
  VideoBufferSize 40
  
  
  
  # Number of frames per second
  
  VideoFrameRate 3
  
  
  
  # Size of the video frame: WxH (default: 160x128)
  
  # The following abbreviations are defined: sqcif, qcif, cif, 4cif, qqvga,
  
  # qvga, vga, svga, xga, uxga, qxga, sxga, qsxga, hsxga, wvga, wxga, wsxga,
  
  # wuxga, woxga, wqsxga, wquxga, whsxga, whuxga, cga, ega, hd480, hd720,
  
  # hd1080
  
  VideoSize 160x128
  
  
  
  # Transmit only intra frames (useful for low bitrates, but kills frame rate).
  
  #VideoIntraOnly
  
  
  
  # If non-intra only, an intra frame is transmitted every VideoGopSize
  
  # frames. Video synchronization can only begin at an intra frame.
  
  VideoGopSize 12
  
  
  
  # More MPEG-4 parameters
  
  # VideoHighQuality
  
  # Video4MotionVector
  
  
  
  # Choose your codecs:
  
  #AudioCodec mp2
  
  #VideoCodec mpeg1video
  
  
  
  # Suppress audio
  
  #NoAudio
  
  
  
  # Suppress video
  
  #NoVideo
  
  
  
  #VideoQMin 3
  
  #VideoQMax 31
  
  
  
  # Set this to the number of seconds backwards in time to start. Note that
  
  # most players will buffer 5-10 seconds of video, and also you need to allow
  
  # for a keyframe to appear in the data stream.
  
  #Preroll 15
  
  
  
  # ACL:
  
  
  
  # You can allow ranges of addresses (or single addresses)
  
  #ACL ALLOW <first address="address"> <last address="address">
  
  
  
  # You can deny ranges of addresses (or single addresses)
  
  #ACL DENY <first address="address"> <last address="address">
  
  
  
  # You can repeat the ACL allow/deny as often as you like. It is on a per
  
  # stream basis. The first match defines the action. If there are no matches,
  
  # then the default is the inverse of the last ACL statement.
  
  #
  
  # Thus 'ACL allow localhost' only allows access from localhost.
  
  # 'ACL deny 1.0.0.0 1.255.255.255' would deny the whole of network 1 and
  
  # allow everybody else.
  
  
  
  </last></first></last></first></stream>
  
  
  
  
  
  ##################################################################
  
  # Example streams
  
  
  
  
  
  # Multipart JPEG
  
  
  
  #<stream>
  
  #Feed feed1.ffm
  
  #Format mpjpeg
  
  #VideoFrameRate 2
  
  #VideoIntraOnly
  
  #NoAudio
  
  #Strict -1
  
  #</stream>
  
  
  
  
  
  # Single JPEG
  
  
  
  #<stream>
  
  #Feed feed1.ffm
  
  #Format jpeg
  
  #VideoFrameRate 2
  
  #VideoIntraOnly
  
  ##VideoSize 352x240
  
  #NoAudio
  
  #Strict -1
  
  #</stream>
  
  
  
  
  
  # Flash
  
  
  
  #<stream>
  
  #Feed feed1.ffm
  
  #Format swf
  
  #VideoFrameRate 2
  
  #VideoIntraOnly
  
  #NoAudio
  
  #</stream>
  
  
  
  
  
  # ASF compatible
  
  
  
  <stream>
  
  Feed feed1.ffm
  
  Format asf
  
  VideoFrameRate 15
  
  VideoSize 352x240
  
  VideoBitRate 256
  
  VideoBufferSize 40
  
  VideoGopSize 30
  
  AudioBitRate 64
  
  StartSendOnKey
  
  </stream>
  
  
  
  
  
  # MP3 audio
  
  
  
  #<stream>
  
  #Feed feed1.ffm
  
  #Format mp2
  
  #AudioCodec mp3
  
  #AudioBitRate 64
  
  #AudioChannels 1
  
  #AudioSampleRate 44100
  
  #NoVideo
  
  #</stream>
  
  
  
  
  
  # Ogg Vorbis audio
  
  
  
  #<stream>
  
  #Feed feed1.ffm
  
  #Metadata title "Stream title"
  
  #AudioBitRate 64
  
  #AudioChannels 2
  
  #AudioSampleRate 44100
  
  #NoVideo
  
  #</stream>
  
  
  
  
  
  # Real with audio only at 32 kbits
  
  
  
  #<stream>
  
  #Feed feed1.ffm
  
  #Format rm
  
  #AudioBitRate 32
  
  #NoVideo
  
  #NoAudio
  
  #</stream>
  
  
  
  
  
  # Real with audio and video at 64 kbits
  
  
  
  #<stream>
  
  #Feed feed1.ffm
  
  #Format rm
  
  #AudioBitRate 32
  
  #VideoBitRate 128
  
  #VideoFrameRate 25
  
  #VideoGopSize 25
  
  #NoAudio
  
  #</stream>
  
  
  
  
  
  ##################################################################
  
  # A stream coming from a file: you only need to set the input
  
  # filename and optionally a new format. Supported conversions:
  
  #    AVI -> ASF
  
  
  
  #<stream>
  
  #File "/usr/local/httpd/htdocs/tlive.rm"
  
  #NoAudio
  
  #</stream>
  
  
  
  #<stream>
  
  #File "/usr/local/httpd/htdocs/test.asf"
  
  #NoAudio
  
  #Metadata author "Me"
  
  #Metadata copyright "Super MegaCorp"
  
  #Metadata title "Test stream from disk"
  
  #Metadata comment "Test comment"
  
  #</stream>
  
  
  
  
  
  ##################################################################
  
  # RTSP examples
  
  #
  
  # You can access this stream with the RTSP URL:
  
  #   rtsp://localhost:5454/test1-rtsp.mpg
  
  #
  
  # A non-standard RTSP redirector is also created. Its URL is:
  
  #   http://localhost:8090/test1-rtsp.rtsp
  
  
  
  #<stream>
  
  #Format rtp
  
  #File "/usr/local/httpd/htdocs/test1.mpg"
  
  #</stream>
  
  
  
  
  
  # Transcode an incoming live feed to another live feed,
  
  # using libx264 and video presets
  
  
  
  #<stream>
  
  #Format rtp
  
  #Feed feed1.ffm
  
  #VideoCodec libx264
  
  #VideoFrameRate 24
  
  #VideoBitRate 100
  
  #VideoSize 480x272
  
  #AVPresetVideo default
  
  #AVPresetVideo baseline
  
  #AVOptionVideo flags +global_header
  
  #
  
  #AudioCodec libfaac
  
  #AudioBitRate 32
  
  #AudioChannels 2
  
  #AudioSampleRate 22050
  
  #AVOptionAudio flags +global_header
  
  #</stream>
  
  
  
  ##################################################################
  
  # SDP/multicast examples
  
  #
  
  # If you want to send your stream in multicast, you must set the
  
  # multicast address with MulticastAddress. The port and the TTL can
  
  # also be set.
  
  #
  
  # An SDP file is automatically generated by ffserver by adding the
  
  # 'sdp' extension to the stream name (here
  
  # http://localhost:8090/test1-sdp.sdp). You should usually give this
  
  # file to your player to play the stream.
  
  #
  
  # The 'NoLoop' option can be used to avoid looping when the stream is
  
  # terminated.
  
  
  
  #<stream>
  
  #Format rtp
  
  #File "/usr/local/httpd/htdocs/test1.mpg"
  
  #MulticastAddress 224.124.0.1
  
  #MulticastPort 5000
  
  #MulticastTTL 16
  
  #NoLoop
  
  #</stream>
  
  
  
  
  
  ##################################################################
  
  # Special streams
  
  
  
  # Server status
  
  
  
  <stream>
  
  Format status
  
  
  
  # Only allow local people to get the status
  
  ACL allow localhost
  
  ACL allow 192.168.0.0 192.168.255.255
  
  
  
  #FaviconURL http://pond1.gladstonefamily.net:8080/favicon.ico
  
  </stream>
  
  
  
  
  
  # Redirect index.html to the appropriate site
  
  
  
  <redirect>
  
  URL http://www.ffmpeg.org/
  
  </redirect>

  I started my server and executed :

  ffserver -d -f /usr/share/doc/ffmpeg-2.6.8/ffserver.conf

  No error message and everything looks fine.

  After that I execute this (in your answer, I think you forgot the port number) :

  ffmpeg -i "rtsp://200.180.90.95:554/onvif1" -r 25 -s 640x480 -c:v libx264 -flags +global_header -f flv "http://45.79.207.38:8090/feed1.ffm"

  Then I get this log :

    libavutil      54. 20.100 / 54. 20.100
  
    libavcodec     56. 26.100 / 56. 26.100
  
    libavformat    56. 25.101 / 56. 25.101
  
    libavdevice    56.  4.100 / 56.  4.100
  
    libavfilter     5. 11.102 /  5. 11.102
  
    libavresample   2.  1.  0 /  2.  1.  0
  
    libswscale      3.  1.101 /  3.  1.101
  
    libswresample   1.  1.100 /  1.  1.100
  
    libpostproc    53.  3.100 / 53.  3.100
  
  [h264 @ 0x1a23580] RTP: missed 1 packets
  
  [pcm_alaw @ 0x1a24360] RTP: missed 2 packets
  
  [h264 @ 0x1a23580] RTP: missed 1 packets
  
  Invalid UE golomb code
  
  [h264 @ 0x1a23580] cbp too large (3199971767) at 76 33
  
  [h264 @ 0x1a23580] error while decoding MB 76 33
  
  [h264 @ 0x1a23580] Cannot use next picture in error concealment
  
  [h264 @ 0x1a23580] concealing 933 DC, 933 AC, 933 MV errors in P frame
  
  [h264 @ 0x1a23580] RTP: missed 1 packets
  
  [h264 @ 0x1a23580] cbp too large (62) at 50 24
  
  [h264 @ 0x1a23580] error while decoding MB 50 24
  
  [h264 @ 0x1a23580] Cannot use next picture in error concealment
  
  [h264 @ 0x1a23580] concealing 1679 DC, 1679 AC, 1679 MV errors in P frame
  
  [h264 @ 0x1a23580] RTP: missed 2 packets
  
  [h264 @ 0x1a23580] Cannot use next picture in error concealment
  
  [h264 @ 0x1a23580] concealing 1965 DC, 1965 AC, 1965 MV errors in P frame
  
  [pcm_alaw @ 0x1a24360] RTP: missed 1 packets
  
      Last message repeated 1 times
  
  [h264 @ 0x1a23580] RTP: missed 3 packets
  
  [h264 @ 0x1a23580] mb_type 49 in P slice too large at 74 25
  
  [h264 @ 0x1a23580] error while decoding MB 74 25
  
  [h264 @ 0x1a23580] Cannot use next picture in error concealment
  
  [h264 @ 0x1a23580] concealing 1575 DC, 1575 AC, 1575 MV errors in P frame
  
  [h264 @ 0x1a23580] RTP: missed 2 packets
  
  [h264 @ 0x1a23580] P sub_mb_type 29 out of range at 30 26
  
  [h264 @ 0x1a23580] error while decoding MB 30 26
  
  [h264 @ 0x1a23580] Cannot use next picture in error concealment
  
  [h264 @ 0x1a23580] concealing 1539 DC, 1539 AC, 1539 MV errors in P frame
  
  [h264 @ 0x1a23580] RTP: missed 1 packets
  
  [h264 @ 0x1a23580] out of range intra chroma pred mode at 72 29
  
  [h264 @ 0x1a23580] error while decoding MB 72 29
  
  [h264 @ 0x1a23580] Cannot use next picture in error concealment
  
  [h264 @ 0x1a23580] concealing 1257 DC, 1257 AC, 1257 MV errors in P frame
  
  [h264 @ 0x1a23580] RTP: missed 3 packets
  
  [h264 @ 0x1a23580] negative number of zero coeffs at 48 5
  
  [h264 @ 0x1a23580] error while decoding MB 48 5
  
  [h264 @ 0x1a23580] Cannot use next picture in error concealment
  
  [h264 @ 0x1a23580] concealing 3201 DC, 3201 AC, 3201 MV errors in P frame
  
  [pcm_alaw @ 0x1a24360] RTP: missed 1 packets
  
  [rtsp @ 0x1a20ee0] decoding for stream 0 failed
  
  Guessed Channel Layout for  Input Stream #0.1 : mono
  
  Input #0, rtsp, from 'rtsp://200.180.90.95:554/onvif1':
  
    Metadata:
  
      title           : H.264 Video, RtspServer_0.0.0.2
  
    Duration: N/A, start: 0.000000, bitrate: N/A
  
      Stream #0:0: Video: h264 (Baseline), yuv420p, 1280x720, 90k tbr, 90k tbn, 180k tbc
  
      Stream #0:1: Audio: pcm_alaw, 8000 Hz, 1 channels, s16, 64 kb/s
  
  [libx264 @ 0x1b728a0] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX AVX2 FMA3 LZCNT BMI2
  
  [libx264 @ 0x1b728a0] profile High, level 3.0
  
  [libx264 @ 0x1b728a0] 264 - core 142 r2495 6a301b6 - H.264/MPEG-4 AVC codec - Copyleft 2003-2014 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=1 lookahead_threads=1 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
  
  [flv @ 0x1a66300] FLV does not support sample rate 8000, choose from (44100, 22050, 11025)
  
  [flv @ 0x1a66300] Audio codec mp3 not compatible with flv
  
  Output #0, flv, to 'http://45.79.207.38:8090/feed1.ffm':
  
    Metadata:
  
      title           : H.264 Video, RtspServer_0.0.0.2
  
      encoder         : Lavf56.25.101
  
      Stream #0:0: Video: h264 (libx264) ([7][0][0][0] / 0x0007), yuv420p, 640x480, q=-1--1, 25 fps, 1k tbn, 25 tbc
  
      Metadata:
  
        encoder         : Lavc56.26.100 libx264
  
      Stream #0:1: Audio: mp3 (libmp3lame) ([2][0][0][0] / 0x0002), 8000 Hz, mono, s16p
  
      Metadata:
  
        encoder         : Lavc56.26.100 libmp3lame
  
  Stream mapping:
  
    Stream #0:0 -> #0:0 (h264 (native) -> h264 (libx264))
  
    Stream #0:1 -> #0:1 (pcm_alaw (native) -> mp3 (libmp3lame))
  
  Could not write header for output file #0 (incorrect codec parameters ?): Function not implemented

  I am doing this in a clean install of CENTOS, no customization. Could you please helpe me ?

• I have an application in flask where it streams a camera using ffmpeg, the problem is that I can not display the video from the camera using the GPU [closed]

  17 janvier, par Ruben

  I'll put you in context, I am using flask (python) to display a camera in the browser to stream it, for this I use the following Python code :

  


  command = [
     'ffmpeg',
     '-loglevel', 'warning',
     '-rtsp_transport', 'tcp',
     '-i', self.config['url'],
     '-map', '0:v:0', # fuerzo que solo procese el video
     '-vf', f'fps={self.config["fps"]},scale=640:360:force_original_aspect_ratio=decrease',
     '-c:v', 'h264_nvenc', # especificamos que queremos tirar de la gpu de nvidia
     '-preset', 'p7', # ajusta para la maxima calidad/velocidad (p1 mas rapida pero peor calidad - p7 más lento pero mejor calidad)
     '-qp', self.config['quality'], # control de calidad del codificador (0 [mejor calidad] - 51 [peor calidad])
     '-pix_fmt', 'yuv444p', # se mete explicitamente el formato de pixeles
     '-color_range', 'pc',
     '-an', # desactiva el audio
     '-f', 'image2pipe',
     'pipe:1'
] 

self.process = subprocess.Popen(
   command,
   stdout=subprocess.PIPE,
   stderr=subprocess.PIPE,
   bufsize=10**8
)


  


  The problem is that it does not display the video streaming, but it connects correctly to the camera.

  


  On the other hand, It show me the following warnings, which may have something to do with the display, it's probably the second warning that has to do with the pixel format :

  


  DEBUG :main:FFmpeg [camera1] : Guessed Channel Layout for Input Stream #0.1 : mono
DEBUG :main:FFmpeg [camera1] : [swscaler @ 0x560f70b78680] deprecated pixel format used, make sure you did set range correctly

  


  The server has different encodes installed :

  


  DEV.LS h264 H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10 (decoders : h264 h264_v4l2m2m h264_qsv h264_cuvid ) (encoders : libx264 libx264rgb h264_nvenc h264_omx h264_qsv h264_v4l2m2m h264_vaapi nvenc nvenc_h264 )

  


  Y uso el h264_nvenc, tambien el servidor tiene soporte de aceleración de hardware con :

  


  libavutil 56. 70.100 / 56. 70.100
libavcodec 58.134.100 / 58.134.100
libavformat 58. 76.100 / 58. 76.100
libavdevice 58. 13.100 / 58. 13.100
libavfilter 7.110.100 / 7.110.100
libswscale 5. 9.100 / 5. 9.100
libswresample 3. 9.100 / 3. 9.100
libpostproc 55. 9.100 / 55. 9.100
Hardware acceleration methods :
vdpau
cuda
vaapi
qsv
drm
opencl

  


  Between them h264_nvenc uses cuda

  


  I expand a little on the information it provides me when using h264_nvenc :

  


  Encoder h264_nvenc [NVIDIA NVENC H.264 encoder]:&#xA;    General capabilities: dr1 delay hardware&#xA;    Threading capabilities: none&#xA;    Supported hardware devices: cuda cuda&#xA;    Supported pixel formats: yuv420p nv12 p010le yuv444p p016le yuv444p16le bgr0 rgb0 cuda&#xA;h264_nvenc AVOptions:&#xA;  -preset            <int>        E..V....... Set the encoding preset (from 0 to 18) (default p4)&#xA;     default         0            E..V.......&#xA;     slow            1            E..V....... hq 2 passes&#xA;     medium          2            E..V....... hq 1 pass&#xA;     fast            3            E..V....... hp 1 pass&#xA;     hp              4            E..V.......&#xA;     hq              5            E..V.......&#xA;     bd              6            E..V.......&#xA;     ll              7            E..V....... low latency&#xA;     llhq            8            E..V....... low latency hq&#xA;     llhp            9            E..V....... low latency hp&#xA;     lossless        10           E..V.......&#xA;     losslesshp      11           E..V.......&#xA;     p1              12           E..V....... fastest (lowest quality)&#xA;     p2              13           E..V....... faster (lower quality)&#xA;     p3              14           E..V....... fast (low quality)&#xA;     p4              15           E..V....... medium (default)&#xA;     p5              16           E..V....... slow (good quality)&#xA;     p6              17           E..V....... slower (better quality)&#xA;     p7              18           E..V....... slowest (best quality)&#xA;  -tune              <int>        E..V....... Set the encoding tuning info (from 1 to 4) (default hq)&#xA;     hq              1            E..V....... High quality&#xA;     ll              2            E..V....... Low latency&#xA;     ull             3            E..V....... Ultra low latency&#xA;     lossless        4            E..V....... Lossless&#xA;  -profile           <int>        E..V....... Set the encoding profile (from 0 to 3) (default main)&#xA;     baseline        0            E..V.......&#xA;     main            1            E..V.......&#xA;     high            2            E..V.......&#xA;     high444p        3            E..V.......&#xA;  -level             <int>        E..V....... Set the encoding level restriction (from 0 to 62) (default auto)&#xA;     auto            0            E..V.......&#xA;     1               10           E..V.......&#xA;     1.0             10           E..V.......&#xA;     1b              9            E..V.......&#xA;     1.0b            9            E..V.......&#xA;     1.1             11           E..V.......&#xA;     1.2             12           E..V.......&#xA;     1.3             13           E..V.......&#xA;     2               20           E..V.......&#xA;     2.0             20           E..V.......&#xA;     2.1             21           E..V.......&#xA;     2.2             22           E..V.......&#xA;     3               30           E..V.......&#xA;     3.0             30           E..V.......&#xA;     3.1             31           E..V.......&#xA;     3.2             32           E..V.......&#xA;     4               40           E..V.......&#xA;     4.0             40           E..V.......&#xA;     4.1             41           E..V.......&#xA;     4.2             42           E..V.......&#xA;     5               50           E..V.......&#xA;     5.0             50           E..V.......&#xA;     5.1             51           E..V.......&#xA;     5.2             52           E..V.......&#xA;     6.0             60           E..V.......&#xA;     6.1             61           E..V.......&#xA;     6.2             62           E..V.......&#xA;  -rc                <int>        E..V....... Override the preset rate-control (from -1 to INT_MAX) (default -1)&#xA;     constqp         0            E..V....... Constant QP mode&#xA;     vbr             1            E..V....... Variable bitrate mode&#xA;     cbr             2            E..V....... Constant bitrate mode&#xA;     vbr_minqp       8388612      E..V....... Variable bitrate mode with MinQP (deprecated)&#xA;     ll_2pass_quality 8388616      E..V....... Multi-pass optimized for image quality (deprecated)&#xA;     ll_2pass_size   8388624      E..V....... Multi-pass optimized for constant frame size (deprecated)&#xA;     vbr_2pass       8388640      E..V....... Multi-pass variable bitrate mode (deprecated)&#xA;     cbr_ld_hq       8388616      E..V....... Constant bitrate low delay high quality mode&#xA;     cbr_hq          8388624      E..V....... Constant bitrate high quality mode&#xA;     vbr_hq          8388640      E..V....... Variable bitrate high quality mode&#xA;  -rc-lookahead      <int>        E..V....... Number of frames to look ahead for rate-control (from 0 to INT_MAX) (default 0)&#xA;  -surfaces          <int>        E..V....... Number of concurrent surfaces (from 0 to 64) (default 0)&#xA;  -cbr               <boolean>    E..V....... Use cbr encoding mode (default false)&#xA;  -2pass             <boolean>    E..V....... Use 2pass encoding mode (default auto)&#xA;  -gpu               <int>        E..V....... Selects which NVENC capable GPU to use. First GPU is 0, second is 1, and so on. (from -2 to INT_MAX) (default any)&#xA;     any             -1           E..V....... Pick the first device available&#xA;     list            -2           E..V....... List the available devices&#xA;  -delay             <int>        E..V....... Delay frame output by the given amount of frames (from 0 to INT_MAX) (default INT_MAX)&#xA;  -no-scenecut       <boolean>    E..V....... When lookahead is enabled, set this to 1 to disable adaptive I-frame insertion at scene cuts (default false)&#xA;  -forced-idr        <boolean>    E..V....... If forcing keyframes, force them as IDR frames. (default false)&#xA;  -b_adapt           <boolean>    E..V....... When lookahead is enabled, set this to 0 to disable adaptive B-frame decision (default true)&#xA;  -spatial-aq        <boolean>    E..V....... set to 1 to enable Spatial AQ (default false)&#xA;  -spatial_aq        <boolean>    E..V....... set to 1 to enable Spatial AQ (default false)&#xA;  -temporal-aq       <boolean>    E..V....... set to 1 to enable Temporal AQ (default false)&#xA;  -temporal_aq       <boolean>    E..V....... set to 1 to enable Temporal AQ (default false)&#xA;  -zerolatency       <boolean>    E..V....... Set 1 to indicate zero latency operation (no reordering delay) (default false)&#xA;  -nonref_p          <boolean>    E..V....... Set this to 1 to enable automatic insertion of non-reference P-frames (default false)&#xA;  -strict_gop        <boolean>    E..V....... Set 1 to minimize GOP-to-GOP rate fluctuations (default false)&#xA;  -aq-strength       <int>        E..V....... When Spatial AQ is enabled, this field is used to specify AQ strength. AQ strength scale is from 1 (low) - 15 (aggressive) (from 1 to 15) (default 8)&#xA;  -cq                <float>      E..V....... Set target quality level (0 to 51, 0 means automatic) for constant quality mode in VBR rate control (from 0 to 51) (default 0)&#xA;  -aud               <boolean>    E..V....... Use access unit delimiters (default false)&#xA;  -bluray-compat     <boolean>    E..V....... Bluray compatibility workarounds (default false)&#xA;  -init_qpP          <int>        E..V....... Initial QP value for P frame (from -1 to 51) (default -1)&#xA;  -init_qpB          <int>        E..V....... Initial QP value for B frame (from -1 to 51) (default -1)&#xA;  -init_qpI          <int>        E..V....... Initial QP value for I frame (from -1 to 51) (default -1)&#xA;  -qp                <int>        E..V....... Constant quantization parameter rate control method (from -1 to 51) (default -1)&#xA;  -weighted_pred     <int>        E..V....... Set 1 to enable weighted prediction (from 0 to 1) (default 0)&#xA;  -coder             <int>        E..V....... Coder type (from -1 to 2) (default default)&#xA;     default         -1           E..V.......&#xA;     auto            0            E..V.......&#xA;     cabac           1            E..V.......&#xA;     cavlc           2            E..V.......&#xA;     ac              1            E..V.......&#xA;     vlc             2            E..V.......&#xA;  -b_ref_mode        <int>        E..V....... Use B frames as references (from 0 to 2) (default disabled)&#xA;     disabled        0            E..V....... B frames will not be used for reference&#xA;     each            1            E..V....... Each B frame will be used for reference&#xA;     middle          2            E..V....... Only (number of B frames)/2 will be used for reference&#xA;  -a53cc             <boolean>    E..V....... Use A53 Closed Captions (if available) (default true)&#xA;  -dpb_size          <int>        E..V....... Specifies the DPB size used for encoding (0 means automatic) (from 0 to INT_MAX) (default 0)&#xA;  -multipass         <int>        E..V....... Set the multipass encoding (from 0 to 2) (default disabled)&#xA;     disabled        0            E..V....... Single Pass&#xA;     qres            1            E..V....... Two Pass encoding is enabled where first Pass is quarter resolution&#xA;     fullres         2            E..V....... Two Pass encoding is enabled where first Pass is full resolution&#xA;  -ldkfs             <int>        E..V....... Low delay key frame scale; Specifies the Scene Change frame size increase allowed in case of single frame VBV and CBR (from 0 to 255) (default 0)&#xA;</int></int></int></boolean></int></int></int></int></int></int></int></boolean></boolean></float></int></boolean></boolean></boolean></boolean></boolean></boolean></boolean></boolean></boolean></boolean></int></int></boolean></boolean></int></int></int></int></int></int></int>

  


  If anyone has some idea or needs more information to help me, I would appreciate it.

  


• using ffmpeg as multiple downloads

  26 avril 2013, par user2321982

  well guys, I'm having problems with my application.
  well I'll explain more, I'm using the plugin uploader uploads multiple videos and I'm using the ffmpeg extension to my php version.

  <code class="echappe-js">&lt;script type=&quot;text/javascript&quot;&gt;<br />
  
  // Convert divs to queue widgets when the DOM is ready<br />
  
  $(function() {<br />
  
      $(&quot;#uploader&quot;).pluploadQueue({<br />
  
          // General settings<br />
  
          runtimes : &amp;#39;gears,flash,silverlight,browserplus,html5&amp;#39;,<br />
  
          url : &amp;#39;upload.php?id=&amp;lt;?= $login_usuario; ?&gt;&amp;amp;name=&amp;lt;?= $name_user; ?&gt;&amp;#39;,<br />
  
          flash_swf_url : &amp;#39;plugins/plupload/plupload.flash.swf&amp;#39;,<br />
  
          containers: &amp;#39;plupload&amp;#39;,<br />
  
          multipart: true,<br />
  
          urlstream_upload: true,<br />
  
          multipart_params:{directory:&amp;#39;uploads&amp;#39;},<br />
  
          multi_selection: true,<br />
  
  <br />
  
          max_file_size : &amp;#39;500mb&amp;#39;,<br />
  
          chunk_size : &amp;#39;1mb&amp;#39;,<br />
  
          unique_names : true,<br />
  
  <br />
  
          // Specify what files to browse for<br />
  
          filters : [<br />
  
              {title : &quot;Video Files&quot;, extensions : &quot;avi,mpg,wmv,flv,3gp,mpeg,mpeg4,mpg4,mp4&quot;}<br />
  
          ],<br />
  
          // Silverlight settings<br />
  
          silverlight_xap_url : &amp;#39;plugins/plupload/plupload.silverlight.xap&amp;#39;<br />
  
      });<br />
  
  <br />
  
      uploader.ini();<br />
  
  <br />
  
   // Client side form validation<br />
  
          $(&amp;#39;form&amp;#39;).submit(function(e) {<br />
  
              var uploader = $(&amp;#39;#uploader&amp;#39;).plupload(&amp;#39;getUploader&amp;#39;);<br />
  
  <br />
  
              // Files in queue upload them first<br />
  
              if (uploader.files.length &gt; 0) {<br />
  
                  // When all files are uploaded submit form<br />
  
                  uploader.bind(&amp;#39;StateChanged&amp;#39;, function() {<br />
  
                      if (uploader.files.length === (uploader.total.uploaded + uploader.total.failed)) {<br />
  
                          $(&amp;#39;form&amp;#39;)[0].submit();<br />
  
                      }<br />
  
                  });<br />
  
  <br />
  
                  uploader.start();<br />
  
              } else<br />
  
                  alert(&amp;#39;You must at least upload one file.&amp;#39;);<br />
  
  <br />
  
              return false;<br />
  
          });<br />
  
      });<br />
  
  &lt;/script&gt;
  
                              
  You browser doesn't have Flash, Silverlight, Gears, BrowserPlus or HTML5 support.
  
  
  

  well he calls javascript in a php file, in case it will upload the videos.

  what I want is to get the length, resolution, file size and take a screenshot of the video randomly, so far so good, the problem is that it only works with only one upload at a time.
  When sending more than one he does the procedure with ffmpeg, besides the most is not taking a screenshot of the video.
  below is my code

  <?php
  
  ini_set('max_execution_time', 300); //300 seconds = 5 minutes
  
  if (!extension_loaded ('ffmpeg') ) exit ( 'ffmpeg não foi carregado!' );
  
  // HTTP headers for no cache etc
  
  header("Expires: Mon, 26 Jul 1997 05:00:00 GMT");
  
  header("Last-Modified: " . gmdate("D, d M Y H:i:s") . " GMT");
  
  header("Cache-Control: no-store, no-cache, must-revalidate");
  
  header("Cache-Control: post-check=0, pre-check=0", false);
  
  header("Pragma: no-cache");
  
  
  
  include("includes/seguranca.php");
  
  include("includes/classes/class.mysql.php");
  
  include("includes/funcoes/sql_inject.php");
  
  
  
  $id_user = anti_injection($_GET['id']);
  
  session_start();
  
  
  
  // Settings
  
  //$targetDir = ini_get("upload_tmp_dir") . DIRECTORY_SEPARATOR . "plupload";
  
  $targetDir = 'uploads/';
  
  
  
  //$cleanupTargetDir = false; // Remove old files
  
  //$maxFileAge = 60 * 60; // Temp file age in seconds
  
  
  
  // 5 minutes execution time
  
  @set_time_limit(5 * 60);
  
  
  
  // Uncomment this one to fake upload time
  
  // usleep(5000);
  
  
  
  // Get parameters
  
  $chunk = isset($_REQUEST["chunk"]) ? $_REQUEST["chunk"] : 0;
  
  $chunks = isset($_REQUEST["chunks"]) ? $_REQUEST["chunks"] : 0;
  
  $fileName = isset($_REQUEST["name"]) ? $_REQUEST["name"] : '';
  
  
  
  // Clean the fileName for security reasons
  
  $fileName = preg_replace('/[^\w\._]+/', '', $fileName);
  
  
  
  // Make sure the fileName is unique but only if chunking is disabled
  
  if ($chunks < 2 && file_exists($targetDir . DIRECTORY_SEPARATOR . $fileName)) {
  
      $ext = strrpos($fileName, '.');
  
      $fileName_a = substr($fileName, 0, $ext);
  
      $fileName_b = substr($fileName, $ext);
  
  
  
      $count = 1;
  
      while (file_exists($targetDir . DIRECTORY_SEPARATOR . $fileName_a . '_' . $count . $fileName_b))
  
          $count++;
  
  
  
      $fileName = $fileName_a . '_' . $count . $fileName_b;
  
  
  
  
  
  }
  
  
  
  // Create target dir
  
  if (!file_exists($targetDir))
  
      @mkdir($targetDir);
  
  
  
  // Look for the content type header
  
  if (isset($_SERVER["HTTP_CONTENT_TYPE"]))
  
      $contentType = $_SERVER["HTTP_CONTENT_TYPE"];
  
  
  
  if (isset($_SERVER["CONTENT_TYPE"]))
  
      $contentType = $_SERVER["CONTENT_TYPE"];
  
  
  
  // Handle non multipart uploads older WebKit versions didn't support multipart in HTML5
  
  if (strpos($contentType, "multipart") !== false) {
  
      if (isset($_FILES['file']['tmp_name']) && is_uploaded_file($_FILES['file']['tmp_name'])) {
  
  
  
  
  
          // Open temp file
  
          $out = fopen($targetDir . DIRECTORY_SEPARATOR . $fileName, $chunk == 0 ? "wb" : "ab");
  
          if ($out) {
  
              // Read binary input stream and append it to temp file
  
              $in = fopen($_FILES['file']['tmp_name'], "rb");
  
  
  
              if ($in) {
  
                  while ($buff = fread($in, 4096))
  
                      fwrite($out, $buff);
  
              } else
  
                  die('{"jsonrpc" : "2.0", "error" : {"code": 101, "message": "Failed to open input stream."}, "id" : "id"}');
  
              fclose($in);
  
              fclose($out);
  
              @unlink($_FILES['file']['tmp_name']);
  
  
  
  
  
  
  
          } else
  
              die('{"jsonrpc" : "2.0", "error" : {"code": 102, "message": "Failed to open output stream."}, "id" : "id"}');
  
      } else
  
          die('{"jsonrpc" : "2.0", "error" : {"code": 103, "message": "Failed to move uploaded file."}, "id" : "id"}');
  
  } else {
  
      // Open temp file
  
      $out = fopen($targetDir . DIRECTORY_SEPARATOR . $fileName, $chunk == 0 ? "wb" : "ab");
  
      if ($out) {
  
          // Read binary input stream and append it to temp file
  
          $in = fopen("php://input", "rb");
  
  
  
          if ($in) {
  
              while ($buff = fread($in, 4096))
  
                  fwrite($out, $buff);
  
          } else
  
              die('{"jsonrpc" : "2.0", "error" : {"code": 101, "message": "Failed to open input stream."}, "id" : "id"}');
  
  
  
          fclose($in);
  
          fclose($out);
  
      } else
  
          die('{"jsonrpc" : "2.0", "error" : {"code": 102, "message": "Failed to open output stream."}, "id" : "id"}');
  
  }
  
  $photoName = $_FILES['file']['name'];
  
  
  
  $exploded_photoName = explode('.', $photoName);
  
  
  
  $user_id = $_SESSION['SESS_MEMBER_ID'];
  
  
  
  if(!isset($_SESSION[$photoName])) {
  
  
  
      $_SESSION[$photoName] = '1';
  
  }
  
  
  
  if($chunk==1){
  
  
  
  $movie_file = realpath("/uploads/".$fileName);
  
  
  
  // instancia a classe ffmpeg_movie para pegarmos as informações que queremos o vídeo
  
  $movie = new ffmpeg_movie($movie_file);
  
  // pegamos a duranção do video em segundos
  
  $duration = round ( $movie->getDuration() , 0 );
  
  // recebemos o número de frames do vídeo
  
  $totalFrames = $movie->getFrameCount();
  
  // recebemos a altura do vídeo em pixels
  
  $height = $movie->getFrameHeight ();
  
  // recebemos a largura do vídeo em pixels
  
  $width = $movie->getFrameWidth ();
  
  
  
  $thumbnailOf = $movie->getFrameRate() * 5;
  
  
  
  $thumbnailOf = round ( $movie->getFrameCount() / 2 );
  
  
  
  // precisamos criar uma imagem GD para o ffmpeg-php trabalhar nela
  
  $image = imagecreatetruecolor ($width,$height ) ;
  
  // criamos a instancia do frame com a classe ffmpeg_frame
  
  $frame = new ffmpeg_frame ($image);
  
  // escolhemos o frame que queremos salvar como jpeg
  
  $thumbnailOf = rand (1,$movie->getFrameCount());
  
  // recebe o frame
  
  $frame = $movie->getFrame ( $thumbnailOf );
  
  // converte para uma imagem GD
  
  $image = $frame->toGDImage ();
  
  
  
  $size = filesize("uploads/".$fileName);
  
  
  
  $valuea = rand(0,100);
  
  $valueb = rand(0,100);
  
  $valuec = rand(0,10);
  
  
  
  $nome = @md5(date('now') * $valuea - $valueb / $valuec);
  
  
  
  $dir = realpath("uploads/snapshots/$nome.jpg");
  
  //salva no HD.
  
  imagejpeg($image, $dir, 100);
  
  
  
  
  
  $resolu = $width."x".$height;
  
  
  
      mysql_query("INSERT INTO video 
  
  (poster_id,duration,video,titulo,resolucao,tamanho) 
  
      VALUES
  
  ('$id_user','$duration','$fileName','$exploded_photoName[0]','$resolu','$size')") or die(mysql_error());
  
  
  
  }
  
  // Return JSON-RPC response
  
  die('{"jsonrpc" : "2.0", "result" : null, "id" : "id"}');
  
  
  
  ?>

  I did another method not so effective to do what I want but it only works if I open the page individually.

  I removed the code from ffmpeg extension and put an include to that page.

  <?
  
  ini_set('max_execution_time', 300); //300 seconds = 5 minutes
  
  if (!extension_loaded ('ffmpeg') ) exit ( 'ffmpeg não foi carregado!' );
  
  
  
  include("includes/seguranca.php");
  
  include("includes/classes/class.mysql.php");
  
  include("includes/funcoes/sql_inject.php");
  
  
  
  $id_user = @anti_injection($_GET['id']);
  
  
  
  class process{
  
      public $videos;
  
      public $target;
  
      public $id_vid;
  
  
  
  public function screen(){
  
  
  
  $videos = $this->videos;
  
  $target = $this->target;
  
  
  
  $movie_file = realpath($videos);
  
  // instancia a classe ffmpeg_movie para pegarmos as informações que queremos o vídeo
  
  $movie = new ffmpeg_movie($movie_file);
  
  $totalFrames = $movie->getFrameCount();
  
  $thumbnailOf = $movie->getFrameRate() * 5;
  
  $thumbnailOf = round ( $movie->getFrameCount() / 2 );
  
  
  
  // criamos a instancia do frame com a classe ffmpeg_frame
  
  $frame = new ffmpeg_frame ( $image );
  
  // escolhemos o frame que queremos salvar como jpeg
  
  
  
  $thumbnailOf = rand (1,$movie->getFrameCount());
  
  // recebe o frame
  
  $frame = $movie->getFrame ( $thumbnailOf );
  
  // converte para uma imagem GD
  
  $image = $frame->toGDImage ();
  
  $valuea = rand(0,100);
  
  $valueb = rand(0,100);
  
  $valuec = rand(0,10);
  
  
  
  $nome = @md5(date('now') * $valuea - $valueb / $valuec);
  
  
  
  $dir = $target."snapshots/".$nome.".jpeg";
  
  //salva no HD.
  
  imagejpeg($image,$dir, 100);
  
  
  
  $q = new Query;
  
  $q  ->update('video')
  
      ->set(
  
          array(
  
             'screen'=>$nome.".jpeg"
  
          )
  
      )
  
          ->where_equal_to(
  
                  array(
  
                          'id_video'=>$this->id_vid
  
                  )
  
          )
  
          ->limit(1)
  
  
  
      ->run();
  
  
  
  }
  
  
  
  
  
  public function duration(){
  
  
  
  $videos = $this->videos;    
  
  $movie_file = realpath($videos);
  
  // instancia a classe ffmpeg_movie para pegarmos as informações que queremos o vídeo
  
  $movie = new ffmpeg_movie($movie_file);
  
  // pegamos a duranção do video em segundos
  
  $duration = round ( $movie->getDuration() , 0 );
  
  
  
  $q = new Query;
  
  $q  ->update('video')
  
      ->set(
  
          array(
  
             'duration'=>$duration
  
          )
  
      )
  
          ->where_equal_to(
  
                  array(
  
                          'id_video'=>$this->id_vid
  
                  )
  
          )
  
          ->limit(1)
  
  
  
      ->run();
  
  }
  
  
  
  
  
  public function resolution(){
  
  
  
  $videos = $this->videos;    
  
  $movie_file = realpath($videos);
  
  // instancia a classe ffmpeg_movie para pegarmos as informações que queremos o vídeo
  
  $movie = new ffmpeg_movie($movie_file);
  
  // recebemos a altura do vídeo em pixels
  
  $height = $movie->getFrameHeight ();
  
  // recebemos a largura do vídeo em pixels
  
  $width = $movie->getFrameWidth ();
  
  $resolucao =  $width."x".$height;
  
  
  
  
  
  $q = new Query;
  
  $q  ->update('video')
  
      ->set(
  
          array(
  
             'resolucao'=>$resolucao
  
          )
  
      )
  
      ->where_equal_to(
  
                  array(
  
                          'id_video'=>$this->id_vid
  
                  )
  
          )
  
          ->limit(1)
  
  
  
      ->run();
  
  }
  
  
  
  final public function checar($a){
  
  
  
  $q = new Query;
  
  $q  ->update('video')
  
      ->set(
  
          array(
  
             'process'=>$a
  
          )
  
      )
  
      ->where_equal_to(
  
                  array(
  
                          'id_video'=>$this->id_vid
  
                  )
  
          )
  
          ->limit(1)
  
  
  
      ->run();
  
  
  
  }
  
  
  
  }
  
  
  
  $q=new Query;
  
  $q->select(
  
                  array(
  
                          'id_video',
  
                          'video',
  
                          'dir',
  
                          'screen',
  
                          'poster_id',
  
                          'resolucao',
  
                          'duration'
  
                  )
  
          )
  
          ->from('video')
  
  
  
  
  
  
  
          ->run();
  
  if($q){
  
          $users=$q->get_selected();
  
          foreach($users as $user){
  
           $c = new process;
  
  
  
           $c->videos = $user['video'];
  
           $c->target = $user['dir'];
  
           $c->id_vid = $user['id_video'];
  
  
  
          if(($user['screen'] == 'NULL') or ($user['duration'] == 'NULL') or ($user['resolucao'] == 'NULL')){
  
                  $c->checar(0);
  
  
  
                  if($user['screen'] == 'NULL'){      
  
                  $c->screen();
  
                  }
  
  
  
                  if($user['duration'] == 'NULL'){
  
                  $c->duration(); 
  
                  }
  
  
  
                  if($user['resolucao'] == 'NULL'){
  
                  $c->resolution();   
  
                  }
  
  
  
          }else{
  
  
  
          $c->checar(1);
  
  
  
          }
  
  
  
          }
  
  }
  
  else{
  
          echo 'Sorry, no users found.';
  
  }
  
  
  
  
  
  
  
  ?>