Recherche avancée

Sur d’autres sites (6936)

• FFMPEG av_interleaved_write_frame() : Operation not permitted

  20 octobre 2014, par camslaz

  Ok I receiving a ’av_interleaved_write_frame() : Operation not permitted’ error while trying to encode an MOV file. Firstly I need to outline the conditions behind it.

  I am encoding 12 different files of different resolution sizes and format types via a PHP script that runs on cron. Basically it grabs a 250mb HD MOV file and encodes it in 4 different frame sizes as MOV, MP4 and WMV file types.

  Now the script takes over 10mins to run and encode each of the files for the 250mb input file. I am outputting the processing times and as soon as the time on the script hits 10mins FFMPEG crashes and returns "av_interleaved_write_frame() : Operation not permitted" for the current file being encoded and all other remaining files yet to be encoded.

  If the input videos is 150MB the total time the script runs for is under 10mins so it encodes all of the videos fine. Additionally if I run the FFMPEG command on the individual file that it fails on for the 250mb file it encodes the file with no issues.

  From doing to research on the error "av_interleaved_write_frame()" it seems it is related to timestamps of what I understand to be of the input file. But in saying that it doesn’t seem to be the case in my instance because I can encode the file with no problem if I do it individually.

  example ffmpeg command

  ffmpeg -i GVowbt3vsrXL.mov -s 1920x1080 -sameq -vf "unsharp" -y GVowbt3vsrXL_4.wmv

  Error output on the failed file at 10mins. Remember there is no issue with the command if I run it by itself it is only when the script hits 10mins.

  'output' =>
  
       array (
  
         0 => 'FFmpeg version SVN-r24545, Copyright (c) 2000-2010 the FFmpeg developers',
  
         1 => '  built on Aug 20 2010 23:32:02 with gcc 4.1.2 20080704 (Red Hat 4.1.2-48)',
  
         2 => '  configuration: --enable-shared --enable-gpl --enable-pthreads --enable-nonfree --cpu=opteron --extra-cflags=\'-O3 -march=opteron -mtune=opteron\' --enable-libmp3lame --enable-libx264 --enable-libxvid --enable-avfilter --enable-filter=movie --enable-avfilter-lavf --enable-swscale',
  
         3 => '  libavutil     50.23. 0 / 50.23. 0',
  
         4 => '  libavcore      0. 1. 0 /  0. 1. 0',
  
         5 => '  libavcodec    52.84. 1 / 52.84. 1',
  
         6 => '  libavformat   52.77. 0 / 52.77. 0',
  
         7 => '  libavdevice   52. 2. 0 / 52. 2. 0',
  
         8 => '  libavfilter    1.26. 1 /  1.26. 1',
  
         9 => '  libswscale     0.11. 0 /  0.11. 0',
  
         10 => 'Input #0, mov,mp4,m4a,3gp,3g2,mj2, from \'/home/hdfootage/public_html/process/VideoEncode/_tmpfiles/GVowbt3vsrXL/GVowbt3vsrXL.mov\':',
  
         11 => '  Metadata:',
  
         12 => '    major_brand     : qt',
  
         13 => '    minor_version   : 537199360',
  
         14 => '    compatible_brands: qt',
  
         15 => '  Duration: 00:00:20.00, start: 0.000000, bitrate: 110802 kb/s',
  
         16 => '    Stream #0.0(eng): Video: mjpeg, yuvj422p, 1920x1080 [PAR 72:72 DAR 16:9], 109386 kb/s, 25 fps, 25 tbr, 25 tbn, 25 tbc',
  
         17 => '    Stream #0.1(eng): Audio: pcm_s16be, 44100 Hz, 2 channels, s16, 1411 kb/s',
  
         18 => '[buffer @ 0xdcd0e0] w:1920 h:1080 pixfmt:yuvj422p',
  
         19 => '[unsharp @ 0xe00280] auto-inserting filter \'auto-inserted scaler 0\' between the filter \'src\' and the filter \'Filter 0 unsharp\'',
  
         20 => '[scale @ 0xe005b0] w:1920 h:1080 fmt:yuvj422p -> w:1920 h:1080 fmt:yuv420p flags:0xa0000004',
  
         21 => '[unsharp @ 0xe00280] effect:sharpen type:luma msize_x:5 msize_y:5 amount:1.00',
  
         22 => '[unsharp @ 0xe00280] effect:none type:chroma msize_x:0 msize_y:0 amount:0.00',
  
         23 => 'Output #0, asf, to \'/home/hdfootage/public_html/process/VideoEncode/_tmpfiles/GVowbt3vsrXL/GVowbt3vsrXL_4.wmv\':',
  
         24 => '  Metadata:',
  
         25 => '    WM/EncodingSettings: Lavf52.77.0',
  
         26 => '    Stream #0.0(eng): Video: msmpeg4, yuv420p, 1920x1080 [PAR 1:1 DAR 16:9], q=2-31, 200 kb/s, 1k tbn, 25 tbc',
  
         27 => '    Stream #0.1(eng): Audio: libmp3lame, 44100 Hz, 2 channels, s16, 64 kb/s',
  
         28 => 'Stream mapping:',
  
         29 => '  Stream #0.0 -> #0.0',
  
         30 => '  Stream #0.1 -> #0.1',
  
         31 => 'Press [q] to stop encoding',
  
         32 => '[msmpeg4 @ 0xdccb50] warning, clipping 1 dct coefficients to -127..127',

  Then it errors

  frame=   75 fps=  5 q=1.0 size=   12704kB time=2.90 bitrate=3588 6.0kbits av_interleaved_write_frame(): Operation not permitted',
  
       )

  Has any anybody encountered this sort of problem before ? It seems to be something to do with the timestamps but only because the script is running for a period longer then 10mins. It maybe related to PHP/Apache config but I don’t know if it is FFMPEG or if it is server config I need to be looking at.

• ffmpeg for android build - is it complete

  3 février 2015, par Robert Rowntree

  //EDIT save time and refer to the SF project . IMO, it may save a ton of work getting up to speed.....

  after more work on this issue :

  added a git project

  build is easier with custom toolchain installed so that you can invoke compiler the easy way

  sample stdout from ndk-build

  —
  originally used ubuntu 12.04 inside vmplayer on windows vista. IMO linux is better for builds than cygwin.

  I follow these instructions getting a indeterminant outcome in which the following conditions exist.

  build_android.sh seems to exit normally
  config.log has error where confirming gcc from crosstoolchain
  all the static libs are built ok
  (./libavfilter, ./libavcodec etc )
  ffmpeg.o is there and executes ok
  no ./android directory as per the prefix setting to config

  it looks like i can just push the binaries to my phone and test in a shell. If that’s ok then i can look to a jni wrapper for the static libs.

  But why didn’t the build write anything to —prefix=./android/armv7-a ??
  that path does not exist at the conclusion of the build

  Details :

  config log what was processed :

  FFMPEG_CONFIGURATION='--target-os=linux --prefix=./android/armv7-a 
  
  --enable-libvpx --enable-libvorbis --enable-pthreads --logfile=config.log
  
  --enable-cross-compile --extra-libs=-lgcc --arch=arm 
  
  --cc=/home/rob/src/android-ndk-r8/toolchains/arm-linux-androideabi-4.4.3/prebuilt/linux-x86/bin/arm-linux-androideabi-gcc 
  
  --cross-prefix=/home/rob/src/android-ndk-r8/toolchains/arm-linux-androideabi-4.4.3/prebuilt/linux-x86/bin/arm-linux-androideabi- 
  
  --nm=/home/rob/src/android-ndk-r8/toolchains/arm-linux-androideabi-4.4.3/prebuilt/linux-x86/bin/arm-linux-androideabi-nm 
  
  --sysroot=/home/rob/src/android-ndk-r8/platforms/android-14/arch-arm/ --extra-cflags='"'"' -O3 -fpic 
  
  -DANDROID -DHAVE_SYS_UIO_H=1 -Dipv6mr_interface=ipv6mr_ifindex -fasm -Wno-psabi -fno-short-enums 
  
  -fno-strict-aliasing -finline-limit=300 -mfloat-abi=softfp  -marm -march=armv7-a -mtune=cortex-a9 '"'"' 
  
  --disable-shared --enable-static --extra-ldflags='"'"'
  
  -Wl,-rpath-link=/home/rob/src/android-ndk-r8/platforms/android-14/arch-arm//usr/lib -L/home/rob/src/android-ndk-r8/platforms/android-14/arch-arm//usr/lib 
  
  -nostdlib -lc -lm -ldl -llog'"'"' 
  
  --disable-everything --enable-demuxer=mov --enable-demuxer=h264 
  
  --disable-ffplay --enable-protocol=file 
  
  --enable-avformat --enable-avcodec --enable-decoder=rawvideo 
  
  --enable-decoder=mjpeg --enable-decoder=h263 --enable-decoder=mpeg4 
  
  --enable-decoder=h264 --enable-parser=h264 --disable-network --enable-zlib --disable-avfilter --disable-avdevice'

  tail of config log contains error on compiler check

  zmbv_test='yes'
  
  zmbv_test_deps='zlib'
  
  WARNING: /home/rob/src/android-ndk-r8/toolchains/arm-linux-androideabi-4.4.3/prebuilt/linux-x86/bin/arm-linux-androideabi-pkg-config not found, library detection may fail.
  
  mktemp -u XXXXXX
  
  Yd2A0h
  
  WARNING: Unknown C compiler /home/rob/src/android-ndk-r8/toolchains/arm-linux-androideabi-4.4.3/prebuilt/linux-x86/bin/arm-linux-androideabi-gcc, unable to select optimal CFLAGS
  
  check_ld cc
  
  check_cc
  
  BEGIN /tmp/ffconf.m9Kg3cqt.c
  
      1   int main(void){ return 0; }
  
  END /tmp/ffconf.m9Kg3cqt.c
  
  /home/rob/src/android-ndk-r8/toolchains/arm-linux-androideabi-4.4.3/prebuilt/linux-x86/bin/arm-linux-androideabi-gcc -O3 -fpic -DANDROID -DHAVE_SYS_UIO_H=1 -Dipv6mr_interface=ipv6mr_ifindex -fasm -Wno-psabi -fno-short-enums -fno-strict-aliasing -finline-limit=300 -mfloat-abi=softfp -marm -march=armv7-a -mtune=cortex-a9 -c -o /tmp/ffconf.tO2EIBz5.o /tmp/ffconf.m9Kg3cqt.c
  
  ./configure: 640: ./configure: /home/rob/src/android-ndk-r8/toolchains/arm-linux-androideabi-4.4.3/prebuilt/linux-x86/bin/arm-linux-androideabi-gcc: not found
  
  C compiler test failed.

  tail of build_android.sh stdout looks OK

  libavutil/opt.c: In function ‘av_find_opt’:
  
  libavutil/opt.c:41:5: warning: ‘av_next_option’ is deprecated (declared at libavutil/opt.h:347) [-Wdeprecated-declarations]
  
  CC  libavutil/pixdesc.o
  
  libavutil/opt.c: In function ‘av_opt_set_defaults’:
  
  libavutil/opt.c:601:5: warning: ‘av_opt_set_defaults2’ is deprecated (declared at libavutil/opt.h:370) [-Wdeprecated-declarations]
  
  CC  libavutil/random_seed.o
  
  CC  libavutil/rational.o
  
  CC  libavutil/rc4.o
  
  CC  libavutil/samplefmt.o
  
  CC  libavutil/sha.o
  
  CC  libavutil/timecode.o
  
  CC  libavutil/tree.o
  
  CC  libavutil/utils.o
  
  CC  libavutil/x86/cpu.o
  
  INSTALL libavdevice/avdevice.h
  
  INSTALL presets/libvpx-1080p50_60.ffpreset
  
  INSTALL presets/libvpx-1080p.ffpreset
  
  INSTALL presets/libvpx-360p.ffpreset
  
  INSTALL presets/libvpx-720p50_60.ffpreset
  
  INSTALL presets/libvpx-720p.ffpreset
  
  INSTALL presets/libx264-ipod320.ffpreset
  
  INSTALL presets/libx264-ipod640.ffpreset
  
  INSTALL doc/ffprobe.xsd
  
  INSTALL libavdevice/libavdevice.pc
  
  INSTALL libavfilter/asrc_abuffer.h
  
  INSTALL libavfilter/avcodec.h
  
  INSTALL libavfilter/avfilter.h
  
  INSTALL libavfilter/avfiltergraph.h
  
  INSTALL libavfilter/buffersink.h
  
  INSTALL libavfilter/version.h
  
  INSTALL libavfilter/vsrc_buffer.h
  
  INSTALL libavfilter/libavfilter.pc
  
  INSTALL libavformat/avformat.h
  
  INSTALL libavformat/avio.h
  
  INSTALL libavformat/version.h
  
  INSTALL libavformat/libavformat.pc
  
  INSTALL libavresample/avresample.h
  
  INSTALL libavresample/version.h
  
  INSTALL libavresample/libavresample.pc
  
  INSTALL libavcodec/avcodec.h
  
  INSTALL libavcodec/avfft.h
  
  INSTALL libavcodec/dxva2.h
  
  INSTALL libavcodec/vaapi.h
  
  INSTALL libavcodec/vda.h
  
  INSTALL libavcodec/vdpau.h
  
  INSTALL libavcodec/version.h
  
  INSTALL libavcodec/xvmc.h
  
  INSTALL libavcodec/libavcodec.pc
  
  INSTALL libswresample/libswresample.pc
  
  INSTALL libswresample/swresample.h
  
  INSTALL libswscale/swscale.h
  
  INSTALL libswscale/libswscale.pc
  
  INSTALL libavutil/adler32.h
  
  INSTALL libavutil/aes.h
  
  INSTALL libavutil/attributes.h
  
  INSTALL libavutil/audio_fifo.h
  
  INSTALL libavutil/audioconvert.h
  
  INSTALL libavutil/avassert.h
  
  INSTALL libavutil/avstring.h
  
  INSTALL libavutil/avutil.h
  
  INSTALL libavutil/base64.h
  
  INSTALL libavutil/bprint.h
  
  INSTALL libavutil/bswap.h
  
  INSTALL libavutil/common.h
  
  INSTALL libavutil/cpu.h
  
  INSTALL libavutil/crc.h
  
  INSTALL libavutil/error.h
  
  INSTALL libavutil/eval.h
  
  INSTALL libavutil/fifo.h
  
  INSTALL libavutil/file.h
  
  INSTALL libavutil/imgutils.h
  
  INSTALL libavutil/intfloat.h
  
  INSTALL libavutil/intfloat_readwrite.h
  
  INSTALL libavutil/intreadwrite.h
  
  INSTALL libavutil/lfg.h
  
  INSTALL libavutil/log.h
  
  INSTALL libavutil/lzo.h
  
  INSTALL libavutil/mathematics.h
  
  INSTALL libavutil/md5.h
  
  INSTALL libavutil/mem.h
  
  INSTALL libavutil/dict.h
  
  INSTALL libavutil/opt.h
  
  INSTALL libavutil/parseutils.h
  
  INSTALL libavutil/pixdesc.h
  
  INSTALL libavutil/pixfmt.h
  
  INSTALL libavutil/random_seed.h
  
  INSTALL libavutil/rational.h
  
  INSTALL libavutil/samplefmt.h
  
  INSTALL libavutil/sha.h
  
  INSTALL libavutil/timecode.h
  
  INSTALL libavutil/timestamp.h
  
  INSTALL libavutil/avconfig.h
  
  INSTALL libavutil/libavutil.pc
  
  AR  libavdevice/libavdevice.a
  
  AR  libavfilter/libavfilter.a
  
  AR  libavformat/libavformat.a
  
  AR  libavresample/libavresample.a
  
  AR  libavcodec/libavcodec.a
  
  AR  libswresample/libswresample.a
  
  AR  libswscale/libswscale.a
  
  AR  libavutil/libavutil.a
  
  INSTALL libavdevice/libavdevice.a
  
  INSTALL libavfilter/libavfilter.a
  
  INSTALL libavresample/libavresample.a
  
  INSTALL libswresample/libswresample.a
  
  INSTALL libswscale/libswscale.a
  
  INSTALL libavutil/libavutil.a
  
  INSTALL libavformat/libavformat.a
  
  LD  ffmpeg_g
  
  INSTALL libavcodec/libavcodec.a
  
  CP  ffmpeg
  
  STRIP   ffmpeg
  
  INSTALL install-progs-yes
  
  INSTALL ffmpeg

• nobody can't exec ffmpeg command

  9 octobre 2013, par joaner

  I'm try to get the tag info from media file use ffmpeg. It work fine on system user xiaoai.

  // it should output the info, but nothing
  
  exec("/usr/bin/ffmpeg -i /home/xiaoai/music/Roar.mp3", $say, $code);
  
  var_dump($code); // code is 1, I know it's a error: Catchall for general errors.

  So I think about permission, my script run as nobody. I give the mp3 file 777 permission, /usr/bin/ffmpeg 777, and user change to nobody. but still not work.

  I must use this ffmpeg, this is only way for aac as i know, mp3, m4a, ogg. Please tell me how to do or other way.