Recherche avancée

Sur d’autres sites (7445)

• France rules Google Analytics non-compliant with GDPR

  11 février 2022, par Erin — Privacy

  Breaking news : The French Data Protection Agency, CNIL (Commission nationale de l’informatique et des libertés), has concluded that the use of Google Analytics is illegal under GDPR. The CNIL has begun issuing formal notices to website managers using Google Analytics.

  This follows the January 2022 Austrian Data Protection Authority’s decision to declare Google Analytics illegal to use under GDPR.

  Google Analytics GDPR breaches continue to spread through the EU

  Since the invalidation of the Privacy Shield framework, an agreement between the EU and US that allowed the transfer of data to certified US companies, the CNIL and other EU data protection authorities have received numerous complaints regarding data transfers collected during visits to websites using Google Analytics.

  "It’s interesting to see that the different European Data Protection Authorities all come to the same conclusion : the use of Google Analytics is illegal. There is a European task force and we assume that this action is coordinated and other authorities will decide similarly."

  About the CNIL’s decision

  In this model case, the CNIL has found that an unnamed website’s use of Google Analytics is non-compliant with GDPR because it had breached Article 44 which prohibits the transfer of personal data beyond the EU, unless the recipient country can prove adequate data protection. 

  Under the GDPR, personal data covers a range of identifiers including email address, race, gender, phone number to name a few, but the less obvious identifiers include IP addresses or cookie IDs, for instance. 

  The CNIL’s decision was based on the fact that the US does not meet GDPR sufficient levels of data protection as a result of US surveillance laws. Therefore, the unnamed website’s use of Google Analytics created risks for their website visitors when their personal data was exported to the US. 

  At the time of writing, it is unknown if the CNIL has issued a fine for the GDPR breach. However, the website manager of the unnamed website has been ordered by the CNIL to comply with the GDPR and, if necessary, stop using Google Analytics under the current conditions.

  "One thing we’re certain of is that these decisions will continue to roll out throughout the EU and potentially beyond.

  Other countries are imposing their own privacy regulations that closely mirror the GDPR like Brazil’s General Data Protection Law (LGPD), India’s Data Protection Bill, New Zealand’s Privacy Act and Canada’s Personal Information Protection and Electronic Documents Act (PIPEDA) to name a few.”

  The CNIL offers an evaluation programme to help website managers determine whether web analytics solutions are exempt from collecting data prior to users’ agreement to opt-in through consent screens. Matomo, for instance, is a leading Google Analytics alternative that has been recommended by CNIL and is exempt from tracking consent. 

  

  English translation : “This is why I anticipated this announcement, gradually moving the analytics of my sites to @matomo_org since several weeks !

  “The @CNIL believes that the use of @googleanalytics is a violation of #GDPR”

  Immediate action required for Google Analytics users

  The CNIL and other EU-based data protection authorities have made their stance on Google Analytics clear and inaction will likely result in fines, which under the GDPR, can be up to €20 million or 4% of the organisation’s global turnover – whichever is higher.

  Based on the CNIL’s formal notice to the model case’s website manager, Google Analytics users should take immediate action to remove any chances of personal data being transferred to the US or find a Google Analytics alternative that is GDPR compliant. 

  

  English translation : “The CNIL considers that the use of Google Analytics is a violation of the GDPR. I use @matomo_org and I welcome it *winking face* It will squeal tires among growthackers who are slaughtering. Opportunity to look at alternative tools”

  Ready to begin your journey to GDPR compliance with Matomo ? Start your 21-day free trial now (no credit card required) and take advantage of our Google Analytics importer so you don’t lose any of your historical data. 

  Try 21-day free Cloud trial

  What does this mean for Matomo users ?

  As the GDPR continues to evolve, our users can rest assured that Matomo will be at the forefront of these changes. With Matomo Cloud, all data is stored in the EU or in your country of choice when you self-host on your own servers with Matomo On-Premise.

  Conclusion

  Google is in the EU’s crosshairs and organisations that continue to use their tools will be the one’s left to clean up the mess – not Google. Now is the time to act. Search for a Google Analytics alternative and close your compliance gaps today. 

  Join over 1 million other websites using Matomo now. Give Matomo a try with a 21-day free trial – no credit card required. 

  Try 21-day free Cloud trial

  We’d like to also bring attention to the privacy-fighting efforts from noyb and Max Schrems, as this should not go unnoticed. noyb is an independent, non-profit organisation that relies on the support of individuals. Support privacy by supporting noyb – donate or become a member now. 

  Contact details for media :

  For quotes or interviews, please email marketing@matomo.org

• ffmpeg Hardware decoding/encoding transcoding

  21 juillet 2020, par Michael McConnell

  I am running FFmpeg from the command line as below...

  


  ffmpeg -hwaccel_output_format cuda -c:v h264_cuvid -i rtmp://127.0.0.1:1935/live/$name -vcodec h264_nvenc -acodec aac -b:v 768k -b:a 96k -vf "scale=852:trunc(ow/a/2)*2" -tune zerolatency -crf 27 -f flv rtmp://localhost:1935/show/$name_480 -vcodec h264_nvenc -acodec aac -b:v 1920k -b:a 128k -vf "scale=1280:trunc(ow/a/2)*2" -tune zerolatency -crf 27 -f flv rtmp://localhost:1935/show/$name_720 -c copy -f flv rtmp://localhost:1935/show/$name_src


  


  In theory, this should be decoding the source RTMP stream and then re-encoding to 480p and 720p (roughly) using the settings in the command, all on hardware. However, it seems that this is not the case as FFmpeg is still using roughly 50% CPU when running.

  


  the card being used is a Nvidia Quadro p2000

  


  ffmpeg has all of the options available :

  


  ffmpeg -hwaccels
ffmpeg version 4.2.2-1ubuntu1 Copyright (c) 2000-2019 the FFmpeg developers
  built with gcc 9 (Ubuntu 9.3.0-3ubuntu1)
  configuration: --prefix=/usr --extra-version=1ubuntu1 --toolchain=hardened --libdir=/usr/lib/x86_64-linux-gnu --incdir=/usr/include/x86_64-linux-gnu --arch=amd64 --enable-gpl --disable-stripping --enable-avresample --disable-filter=resample --enable-avisynth --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librsvg --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opencl --enable-opengl --enable-sdl2 --enable-libdc1394 --enable-libdrm --enable-libiec61883 --enable-nvenc --enable-chromaprint --enable-frei0r --enable-libx264 --enable-shared
  libavutil      56. 31.100 / 56. 31.100
  libavcodec     58. 54.100 / 58. 54.100
  libavformat    58. 29.100 / 58. 29.100
  libavdevice    58.  8.100 / 58.  8.100
  libavfilter     7. 57.100 /  7. 57.100
  libavresample   4.  0.  0 /  4.  0.  0
  libswscale      5.  5.100 /  5.  5.100
  libswresample   3.  5.100 /  3.  5.100
  libpostproc    55.  5.100 / 55.  5.100
Hardware acceleration methods:
vdpau
cuda
vaapi
drm
opencl
cuvid


  


  Output of -encoders

  


  ffmpeg -encoders |grep nvenc
ffmpeg version 4.2.2-1ubuntu1 Copyright (c) 2000-2019 the FFmpeg developers
  built with gcc 9 (Ubuntu 9.3.0-3ubuntu1)
  configuration: --prefix=/usr --extra-version=1ubuntu1 --toolchain=hardened --libdir=/usr/lib/x86_64-linux-gnu --incdir=/usr/include/x86_64-linux-gnu --arch=amd64 --enable-gpl --disable-stripping --enable-avresample --disable-filter=resample --enable-avisynth --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librsvg --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opencl --enable-opengl --enable-sdl2 --enable-libdc1394 --enable-libdrm --enable-libiec61883 --enable-nvenc --enable-chromaprint --enable-frei0r --enable-libx264 --enable-shared
  libavutil      56. 31.100 / 56. 31.100
  libavcodec     58. 54.100 / 58. 54.100
  libavformat    58. 29.100 / 58. 29.100
  libavdevice    58.  8.100 / 58.  8.100
  libavfilter     7. 57.100 /  7. 57.100
  libavresample   4.  0.  0 /  4.  0.  0
  libswscale      5.  5.100 /  5.  5.100
  libswresample   3.  5.100 /  3.  5.100
  libpostproc    55.  5.100 / 55.  5.100
 V..... h264_nvenc           NVIDIA NVENC H.264 encoder (codec h264)
 V..... nvenc                NVIDIA NVENC H.264 encoder (codec h264)
 V..... nvenc_h264           NVIDIA NVENC H.264 encoder (codec h264)
 V..... nvenc_hevc           NVIDIA NVENC hevc encoder (codec hevc)
 V..... hevc_nvenc           NVIDIA NVENC hevc encoder (codec hevc)


  


  Output of decoders :

  


  ffmpeg -decoders |grep cuvid
ffmpeg version 4.2.2-1ubuntu1 Copyright (c) 2000-2019 the FFmpeg developers
  built with gcc 9 (Ubuntu 9.3.0-3ubuntu1)
  configuration: --prefix=/usr --extra-version=1ubuntu1 --toolchain=hardened --libdir=/usr/lib/x86_64-linux-gnu --incdir=/usr/include/x86_64-linux-gnu --arch=amd64 --enable-gpl --disable-stripping --enable-avresample --disable-filter=resample --enable-avisynth --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librsvg --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opencl --enable-opengl --enable-sdl2 --enable-libdc1394 --enable-libdrm --enable-libiec61883 --enable-nvenc --enable-chromaprint --enable-frei0r --enable-libx264 --enable-shared
  libavutil      56. 31.100 / 56. 31.100
  libavcodec     58. 54.100 / 58. 54.100
  libavformat    58. 29.100 / 58. 29.100
  libavdevice    58.  8.100 / 58.  8.100
  libavfilter     7. 57.100 /  7. 57.100
  libavresample   4.  0.  0 /  4.  0.  0
  libswscale      5.  5.100 /  5.  5.100
  libswresample   3.  5.100 /  3.  5.100
  libpostproc    55.  5.100 / 55.  5.100
 V..... h264_cuvid           Nvidia CUVID H264 decoder (codec h264)
 V..... hevc_cuvid           Nvidia CUVID HEVC decoder (codec hevc)
 V..... mjpeg_cuvid          Nvidia CUVID MJPEG decoder (codec mjpeg)
 V..... mpeg1_cuvid          Nvidia CUVID MPEG1VIDEO decoder (codec mpeg1video)
 V..... mpeg2_cuvid          Nvidia CUVID MPEG2VIDEO decoder (codec mpeg2video)
 V..... mpeg4_cuvid          Nvidia CUVID MPEG4 decoder (codec mpeg4)
 V..... vc1_cuvid            Nvidia CUVID VC1 decoder (codec vc1)
 V..... vp8_cuvid            Nvidia CUVID VP8 decoder (codec vp8)
 V..... vp9_cuvid            Nvidia CUVID VP9 decoder (codec vp9)


  


  Could the CPU utilization be correlated to the audio transcoding or would that be handled in hardware as well ?

  


  Any ideas ?

  


• What is White Label Analytics ? Everything You Need to Know

  6 février 2024, par Erin

  Reports are a core part of a marketing agency’s offering. It’s how you build trust with clients by highlighting your efforts and demonstrating your results. 

  But all too often, those reports deliver a jarring and incohesive experience. The culprit ? The logos, colours and names of third-party brands your agency uses to deliver work and create the reports. 

  Luckily, there’s a way to make sure your reports elevate your agency’s stature ; not undermine it. 

  By white labelling your tools, you can deliver a clear and cohesive brand experience — one that strengthens the client relationship rather than diminishing it. 

  In this article, we explain what white label analytics tools are, why it’s important to white label your analytics solution and how you can do it using Matomo. 

  What is white label analytics ?

  White labelling is the process of redesigning a product or service using your company’s brand. The term comes from the act of putting a white label on a product that covers the original branding and allows the reseller to personalise the product.

  White label analytics, then, is a way to customise your analytics software with your agency’s logo and colours. When you white label your analytics, you ensure your reports, dashboards and interface provide a consistent and familiar user experience.

  

  The alternative is to provide your clients with an analytics report containing the logo and branding of your analytics software provider — whether that’s Google Analytics, Matomo, or another tool. 

  For some clients, it can create a confusing experience that takes attention away from your agency’s results.

  Why white label analytics is important

  There are plenty of reasons to white label your analytics tool, from improving your client’s experience to generating additional revenue. Here are four of the most important benefits to know :

  

  Improve the client experience

  You want your clients to have a seamless user experience with your agency’s brand, whether they visit your website, log into their client portal, or read one of your reports. 

  By white labelling your analytics platform, you can give your clients a visually appealing experience that stays in line with the rest of your branding and doesn’t leave them confused about who they are interacting with or which company is providing the service they pay for. 

  This is especially important if your agency uses other third-party tools like a client portal or productivity platform that also allows for custom branding. 

  Strengthen client relationships

  When you use white labelling to remove solution providers’ logos, you ensure your brand gets all of the credit for the hard work you’ve been doing. This can strengthen the agency-client relationship and reaffirm the importance of your agency. 

  But, white labelling allows you to tell a better story through your reports and increases the perceived value you offer. There are no other brands, logos, or names to confuse the narrative or detract from your key points — or to stop the client from understanding just how much value you provide. 

  Save time and increase productivity 

  White labelling your analytics platform can save your team a significant amount of time when creating client reports. 

  There’s no need to carefully screenshot graphs to add them to your own branded report. You can simply email clients a report using your white labelled analytics platform, assuring them of a seamlessly branded experience.

  The upshot is that your team can spend more time on billable work, improving the value they deliver to existing clients or opening up capacity to take on even more work. 

  Increase monetisation opportunities

  Whether you are an agency or consultant, white labelling an analytics solution gives you the opportunity to package and sell analytics as part of your own services. This can open up new revenue streams, help you to diversify your income, and reach a wider audience.

  The beauty of a white label offering is that there is no allusion to the company providing the underlying service.

  The most important elements of an analytics platform to white label 

  A white label analytics solution should offer a broad range of customisation options that range from surface-level branding to functional elements like tracking codes. 

  Below we take a look at the top components you should be able to customise with your chosen platform. 

  Logo and Favicon

  The logo is the first thing clients will see when they open up their analytics platform or look at your reports. It should make your services instantly recognisable, which is why it’s so jarring when clients read a report with another company’s brand slapped on every chart. 

  This should be the very first thing you change since it will be on almost every page and report your client views. Don’t stop there, however. If you send clients web-based reports, you’ll also want to change the platform’s favicon — the small logo you see next to your website in a browser. 

  Customising both your logo and favicon is easy with Matomo. 

  Just head to Administration, then General Settings and click Use a custom Logo under Brand settings.

  

  Upload your brand, click Save, and it will automatically populate your brand in place of the Matomo logo across the platform, just like in the image above.

  Brand name

  Most analytics platforms will mention their brand names repeatedly across the site, so it’s important to change these, too.

  Otherwise, you risk clients reading your analytics reports in detail or playing around with your platform’s settings and getting confused when another seemingly unrelated name keeps popping up. 

  Again, this is easily done with Matomo’s White Label plugin. 

  Head to Administration, then General Settings. Scroll to the bottom of the page to find WhiteLabel settings.

  Enter your brand or product name in the first box and click Save. 

  

  Just like your logo, this will replace every instance of Matomo’s brand name with your own.

  Brand colours

  Changing your analytics platform’s colours to match your own is almost as important as swapping out the logo. 

  Failure to do so could mean the charts and graphs you add to your client reports could cause confusion. 

  You can also use Matomo’s WhiteLabel settings to change the platform’s background and font colours. 

  Just enter a new header background and font colour using hexadecimal values.

  

  This change will also apply to automated email reports. 

  Custom tracking

  Tracking requests and links are an overlooked element of analytics when it comes to white labelling. Most people wouldn’t think twice about them, but they are an easy way for someone in the know to identify which platform you are using. 

  With Matomo’s White Label plugin, it’s possible to customise every request Matomo makes to your clients’ websites. 

  If left unbranded, tracking requests contain the following references : matomo.js and matomo.php. 

  By clicking the Whitelabel tracking endpoint box on the WhiteLabel settings page, those references will be replaced with js/tracker.js and js/tracker.php

  You’ll need to update your tracking code to reflect these changes, otherwise, requests will still contain Matomo branding. 

  Try Matomo for Free

  Get the web insights you need, without compromising data accuracy.

  Start for free

  No credit card required

  Links

  Finally, you’ll want to remove any links to any additional content offered by the analytics company. These are usually included to improve the user experience, but they are best removed if you are letting clients access your platform. 

  With Matomo, you can remove all links by clicking the relevant box in WhiteLabel settings. 

  You can also use the Show Marketplace only to Super Users checkbox to limit the visibility of Matomo’s Marketplace to everyone bar Super Users.

  Can you white label Google Analytics ?

  In a word : no. 

  Google Analytics might be the most popular analytics platform, but it comes up short if you want to customise its appearance. 

  This can be a particular problem for agencies that need to stand out from competitors offering the same generic reports. You can add more context, detail and graphs to your analytics reports, of course. But you’ll never be able to create completely custom, brand-cohesive reports using Google Analytics. 

  3 analytics platforms you can white label

  While you can’t white label Google Analytics, there are several web analytics providers that do offer a white labelling service. Here are three of the best :

  Matomo

  As you’ve already seen, Matomo is the ideal web analytics platform if you want to let your own brand shine through. Matomo lets you personalise the entire dashboard and all of your reports. That includes :

  • Adding your brand logo and favicon
  • Changing the font and background colours 
  • Removing third-party links
  • Tracking using custom URLs 
  • Develop your own custom theme

  Matomo offers a 21-day free trial (no credit card required). If you want to get remove the Matomo branding, you need the White Label plugin, which starts at just $179 per year after a free trial.

  Try Matomo for Free

  Get the web insights you need, without compromising data accuracy.

  Start for free

  No credit card required

  Clicky

  Clicky is a simple, privacy-focused web analytics platform with a white label offering. Like Matomo, you can add your logo and change the platform’s colours. 

  Clicky offers a seven-day free trial and charges a $99 setup fee, with prices starting from $49 and rising to $399. 

  Plausible 

  Plausible is another privacy-focused Google Analytics alternative that offers white labelling. The difference here is that it’s pretty complex to set up. 

  Rather than customising Plausible’s platform, for instance, you need to embed its dashboard into your own user interface. If you want to create your own custom dashboard, you’ll need to use an API. 

  Plausible offers a 30-day free trial.

  Leverage white label analytics today with Matomo

  Don’t put up with confusing unbranded clients a moment longer. White label your analytics platform so the next time you sit down to share insights with your clients, they’ll only see one brand : yours.

  Matomo makes it quick and easy to customise the look of your analytics platform and all of the reports you generate. If you already use Matomo, try the White Label plugin free for 30 days.

  If not, try Matomo with a free 21-day trial. No credit card required. 

  Try Matomo for Free

  21 day free trial. No credit card required.

  
  

  Your email address
  

  Your website address
  

  Your Analytics subdomain will be .matomo.cloud (change)

  Choose your analytics subdomain
  

  .matomo.cloud

  I accept the terms and conditions and data processing agreement (DPA)

  
  Your information will be used to create an account on our cloud service. For more information please consult our privacy policy.
  
  
  

  Start improving your websites now