
Recherche avancée
Autres articles (47)
-
Contribute to documentation
13 avril 2011Documentation is vital to the development of improved technical capabilities.
MediaSPIP welcomes documentation by users as well as developers - including : critique of existing features and functions articles contributed by developers, administrators, content producers and editors screenshots to illustrate the above translations of existing documentation into other languages
To contribute, register to the project users’ mailing (...) -
Selection of projects using MediaSPIP
2 mai 2011, parThe examples below are representative elements of MediaSPIP specific uses for specific projects.
MediaSPIP farm @ Infini
The non profit organizationInfini develops hospitality activities, internet access point, training, realizing innovative projects in the field of information and communication technologies and Communication, and hosting of websites. It plays a unique and prominent role in the Brest (France) area, at the national level, among the half-dozen such association. Its members (...) -
Use, discuss, criticize
13 avril 2011, parTalk to people directly involved in MediaSPIP’s development, or to people around you who could use MediaSPIP to share, enhance or develop their creative projects.
The bigger the community, the more MediaSPIP’s potential will be explored and the faster the software will evolve.
A discussion list is available for all exchanges between users.
Sur d’autres sites (6548)
-
webm to mp4 conversion using ffmpeg
2 décembre 2015, par Pavan KWhen I try to convert a webm file to mp4 the output is very very choppy and it appears as if many frames have been dropped by ffmpeg
I used the following commands to convert
ffmpeg -i movie.webm movie.mp4
ffmpeg -i movie.webm -vcodec libx264 movie.mp4
ffmpeg -i movie.webm -vcodec libx264 -qscale 0 movie.mp4All of them have the same problem. When I use ffprobe it seems to show the frames more or less properly.
UPDATE :
built on Jun 14 2013 14:31:50 with gcc 4.7 (Ubuntu/Linaro 4.7.2-2ubuntu1)
configuration: --prefix=/home/user2/ffmpeg_build --extra-cflags=-I/home/user2/ffmpeg_build/include --extra-ldflags=-L/home/pavan4/ffmpeg_build/lib --bindir=/home/pavan4/bin --extra-libs=-ldl --enable-gpl --enable-libass --enable-libfdk-aac --enable-libmp3lame --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libx264 --enable-nonfree --enable-x11grab
libavutil 52. 35.101 / 52. 35.101
libavcodec 55. 16.100 / 55. 16.100
libavformat 55. 8.102 / 55. 8.102
libavdevice 55. 2.100 / 55. 2.100
libavfilter 3. 77.101 / 3. 77.101
libswscale 2. 3.100 / 2. 3.100
libswresample 0. 17.102 / 0. 17.102
libpostproc 52. 3.100 / 52. 3.100
Hyper fast Audio and Video encoder
usage: ffmpeg [options] [[infile options] -i infile]... {[outfile options] outfile}...
Use -h to get full help or, even better, run 'man ffmpeg'
Input #0, matroska,webm, from '1.webm':
Duration: 00:00:10.64, start: 0.000000, bitrate: 5024 kb/s
Stream #0:0(eng): Video: vp8, yuv420p, 1280x720, SAR 1:1 DAR 16:9, 1k fps, 1k tbr, 1k tbn, 1k tbc (default)
[libx264 @ 0x1d966a0] using SAR=1/1
[libx264 @ 0x1d966a0] MB rate (3600000) > level limit (2073600)
[libx264 @ 0x1d966a0] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2
[libx264 @ 0x1d966a0] profile High, level 5.2
[libx264 @ 0x1d966a0] 264 - core 133 r2 a3ac64b - H.264/MPEG-4 AVC codec - Copyleft 2003-2013 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=12 lookahead_threads=2 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
Output #0, mp4, to '1_conv4.mp4':
Metadata:
encoder : Lavf55.8.102
Stream #0:0(eng): Video: h264 (libx264) ([33][0][0][0] / 0x0021), yuv420p, 1280x720 [SAR 1:1 DAR 16:9], q=-1--1, 16k tbn, 1k tbc (default)
Stream mapping:
Stream #0:0 -> #0:0 (vp8 -> libx264)
Press [q] to stop, [?] for help
frame= 168 fps=0.0 q=33.0 size= 62kB time=00:00:00.11 bitrate=4606.0kbits/frame= 293 fps=230 q=33.0 size= 138kB time=00:00:00.23 bitrate=4809.7kbits/
video:5620kB audio:0kB subtitle:0 global headers:0kB muxing overhead 2.212461%
[libx264 @ 0x1d966a0] frame I:46 Avg QP:18.50 size: 39849
[libx264 @ 0x1d966a0] frame P:2940 Avg QP:18.27 size: 1222
[libx264 @ 0x1d966a0] frame B:7651 Avg QP:17.68 size: 43
[libx264 @ 0x1d966a0] consecutive B-frames: 4.0% 0.2% 0.3% 95.5%
[libx264 @ 0x1d966a0] mb I I16..4: 19.9% 63.2% 16.9%
[libx264 @ 0x1d966a0] mb P I16..4: 0.2% 0.5% 0.1% P16..4: 3.9% 1.1% 0.6% 0.0% 0.0% skip:93.6%
[libx264 @ 0x1d966a0] mb B I16..4: 0.0% 0.0% 0.0% B16..8: 0.2% 0.0% 0.0% direct: 0.0% skip:99.8% L0:25.1% L1:74.9% BI: 0.0%
[libx264 @ 0x1d966a0] 8x8 transform intra:63.6% inter:75.9%
[libx264 @ 0x1d966a0] coded y,uvDC,uvAC intra: 61.5% 53.4% 24.4% inter: 0.5% 0.5% 0.0%
[libx264 @ 0x1d966a0] i16 v,h,dc,p: 52% 19% 19% 11%
[libx264 @ 0x1d966a0] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 32% 17% 13% 4% 6% 9% 5% 8% 6%
[libx264 @ 0x1d966a0] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 30% 18% 14% 5% 8% 10% 6% 6% 3%
[libx264 @ 0x1d966a0] i8c dc,h,v,p: 55% 17% 24% 4%
[libx264 @ 0x1d966a0] Weighted P-Frames: Y:0.0% UV:0.0%
[libx264 @ 0x1d966a0] ref P L0: 82.5% 13.2% 4.0% 0.3%
[libx264 @ 0x1d966a0] ref B L0: 60.2% 39.2% 0.6%
[libx264 @ 0x1d966a0] ref B L1: 98.5% 1.5%
[libx264 @ 0x1d966a0] kb/s:4327.77 -
webm to mp4 conversion using ffmpeg
25 juillet 2022, par Pavan KWhen I try to convert a webm file to mp4 the output is very very choppy and it appears as if many frames have been dropped by ffmpeg



I used the following commands to convert



ffmpeg -i movie.webm movie.mp4
ffmpeg -i movie.webm -vcodec libx264 movie.mp4
ffmpeg -i movie.webm -vcodec libx264 -qscale 0 movie.mp4




All of them have the same problem. When I use ffprobe it seems to show the frames more or less properly.



UPDATE :



built on Jun 14 2013 14:31:50 with gcc 4.7 (Ubuntu/Linaro 4.7.2-2ubuntu1)
 configuration: --prefix=/home/user2/ffmpeg_build --extra-cflags=-I/home/user2/ffmpeg_build/include --extra-ldflags=-L/home/pavan4/ffmpeg_build/lib --bindir=/home/pavan4/bin --extra-libs=-ldl --enable-gpl --enable-libass --enable-libfdk-aac --enable-libmp3lame --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libx264 --enable-nonfree --enable-x11grab
 libavutil 52. 35.101 / 52. 35.101
 libavcodec 55. 16.100 / 55. 16.100
 libavformat 55. 8.102 / 55. 8.102
 libavdevice 55. 2.100 / 55. 2.100
 libavfilter 3. 77.101 / 3. 77.101
 libswscale 2. 3.100 / 2. 3.100
 libswresample 0. 17.102 / 0. 17.102
 libpostproc 52. 3.100 / 52. 3.100
Hyper fast Audio and Video encoder
usage: ffmpeg [options] [[infile options] -i infile]... {[outfile options] outfile}...

Use -h to get full help or, even better, run 'man ffmpeg'

Input #0, matroska,webm, from '1.webm':
 Duration: 00:00:10.64, start: 0.000000, bitrate: 5024 kb/s
 Stream #0:0(eng): Video: vp8, yuv420p, 1280x720, SAR 1:1 DAR 16:9, 1k fps, 1k tbr, 1k tbn, 1k tbc (default)
[libx264 @ 0x1d966a0] using SAR=1/1
[libx264 @ 0x1d966a0] MB rate (3600000) > level limit (2073600)
[libx264 @ 0x1d966a0] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2
[libx264 @ 0x1d966a0] profile High, level 5.2
[libx264 @ 0x1d966a0] 264 - core 133 r2 a3ac64b - H.264/MPEG-4 AVC codec - Copyleft 2003-2013 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=12 lookahead_threads=2 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
Output #0, mp4, to '1_conv4.mp4':
 Metadata:
 encoder : Lavf55.8.102
 Stream #0:0(eng): Video: h264 (libx264) ([33][0][0][0] / 0x0021), yuv420p, 1280x720 [SAR 1:1 DAR 16:9], q=-1--1, 16k tbn, 1k tbc (default)
Stream mapping:
Stream #0:0 -> #0:0 (vp8 -> libx264)
Press [q] to stop, [?] for help
frame= 168 fps=0.0 q=33.0 size= 62kB time=00:00:00.11 bitrate=4606.0kbits/frame= 293 fps=230 q=33.0 size= 138kB time=00:00:00.23 bitrate=4809.7kbits/

video:5620kB audio:0kB subtitle:0 global headers:0kB muxing overhead 2.212461%
[libx264 @ 0x1d966a0] frame I:46 Avg QP:18.50 size: 39849
[libx264 @ 0x1d966a0] frame P:2940 Avg QP:18.27 size: 1222
[libx264 @ 0x1d966a0] frame B:7651 Avg QP:17.68 size: 43
[libx264 @ 0x1d966a0] consecutive B-frames: 4.0% 0.2% 0.3% 95.5%
[libx264 @ 0x1d966a0] mb I I16..4: 19.9% 63.2% 16.9%
[libx264 @ 0x1d966a0] mb P I16..4: 0.2% 0.5% 0.1% P16..4: 3.9% 1.1% 0.6% 0.0% 0.0% skip:93.6%
[libx264 @ 0x1d966a0] mb B I16..4: 0.0% 0.0% 0.0% B16..8: 0.2% 0.0% 0.0% direct: 0.0% skip:99.8% L0:25.1% L1:74.9% BI: 0.0%
[libx264 @ 0x1d966a0] 8x8 transform intra:63.6% inter:75.9%
[libx264 @ 0x1d966a0] coded y,uvDC,uvAC intra: 61.5% 53.4% 24.4% inter: 0.5% 0.5% 0.0%
[libx264 @ 0x1d966a0] i16 v,h,dc,p: 52% 19% 19% 11%
[libx264 @ 0x1d966a0] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 32% 17% 13% 4% 6% 9% 5% 8% 6%
[libx264 @ 0x1d966a0] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 30% 18% 14% 5% 8% 10% 6% 6% 3%
[libx264 @ 0x1d966a0] i8c dc,h,v,p: 55% 17% 24% 4%
[libx264 @ 0x1d966a0] Weighted P-Frames: Y:0.0% UV:0.0%
[libx264 @ 0x1d966a0] ref P L0: 82.5% 13.2% 4.0% 0.3%
[libx264 @ 0x1d966a0] ref B L0: 60.2% 39.2% 0.6%
[libx264 @ 0x1d966a0] ref B L1: 98.5% 1.5%
[libx264 @ 0x1d966a0] kb/s:4327.77



-
webm to mp4 conversion using ffmpeg
25 juillet 2022, par Pavan KWhen I try to convert a webm file to mp4 the output is very very choppy and it appears as if many frames have been dropped by ffmpeg



I used the following commands to convert



ffmpeg -i movie.webm movie.mp4
ffmpeg -i movie.webm -vcodec libx264 movie.mp4
ffmpeg -i movie.webm -vcodec libx264 -qscale 0 movie.mp4




All of them have the same problem. When I use ffprobe it seems to show the frames more or less properly.



UPDATE :



built on Jun 14 2013 14:31:50 with gcc 4.7 (Ubuntu/Linaro 4.7.2-2ubuntu1)
 configuration: --prefix=/home/user2/ffmpeg_build --extra-cflags=-I/home/user2/ffmpeg_build/include --extra-ldflags=-L/home/pavan4/ffmpeg_build/lib --bindir=/home/pavan4/bin --extra-libs=-ldl --enable-gpl --enable-libass --enable-libfdk-aac --enable-libmp3lame --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libx264 --enable-nonfree --enable-x11grab
 libavutil 52. 35.101 / 52. 35.101
 libavcodec 55. 16.100 / 55. 16.100
 libavformat 55. 8.102 / 55. 8.102
 libavdevice 55. 2.100 / 55. 2.100
 libavfilter 3. 77.101 / 3. 77.101
 libswscale 2. 3.100 / 2. 3.100
 libswresample 0. 17.102 / 0. 17.102
 libpostproc 52. 3.100 / 52. 3.100
Hyper fast Audio and Video encoder
usage: ffmpeg [options] [[infile options] -i infile]... {[outfile options] outfile}...

Use -h to get full help or, even better, run 'man ffmpeg'

Input #0, matroska,webm, from '1.webm':
 Duration: 00:00:10.64, start: 0.000000, bitrate: 5024 kb/s
 Stream #0:0(eng): Video: vp8, yuv420p, 1280x720, SAR 1:1 DAR 16:9, 1k fps, 1k tbr, 1k tbn, 1k tbc (default)
[libx264 @ 0x1d966a0] using SAR=1/1
[libx264 @ 0x1d966a0] MB rate (3600000) > level limit (2073600)
[libx264 @ 0x1d966a0] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2
[libx264 @ 0x1d966a0] profile High, level 5.2
[libx264 @ 0x1d966a0] 264 - core 133 r2 a3ac64b - H.264/MPEG-4 AVC codec - Copyleft 2003-2013 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=12 lookahead_threads=2 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
Output #0, mp4, to '1_conv4.mp4':
 Metadata:
 encoder : Lavf55.8.102
 Stream #0:0(eng): Video: h264 (libx264) ([33][0][0][0] / 0x0021), yuv420p, 1280x720 [SAR 1:1 DAR 16:9], q=-1--1, 16k tbn, 1k tbc (default)
Stream mapping:
Stream #0:0 -> #0:0 (vp8 -> libx264)
Press [q] to stop, [?] for help
frame= 168 fps=0.0 q=33.0 size= 62kB time=00:00:00.11 bitrate=4606.0kbits/frame= 293 fps=230 q=33.0 size= 138kB time=00:00:00.23 bitrate=4809.7kbits/

video:5620kB audio:0kB subtitle:0 global headers:0kB muxing overhead 2.212461%
[libx264 @ 0x1d966a0] frame I:46 Avg QP:18.50 size: 39849
[libx264 @ 0x1d966a0] frame P:2940 Avg QP:18.27 size: 1222
[libx264 @ 0x1d966a0] frame B:7651 Avg QP:17.68 size: 43
[libx264 @ 0x1d966a0] consecutive B-frames: 4.0% 0.2% 0.3% 95.5%
[libx264 @ 0x1d966a0] mb I I16..4: 19.9% 63.2% 16.9%
[libx264 @ 0x1d966a0] mb P I16..4: 0.2% 0.5% 0.1% P16..4: 3.9% 1.1% 0.6% 0.0% 0.0% skip:93.6%
[libx264 @ 0x1d966a0] mb B I16..4: 0.0% 0.0% 0.0% B16..8: 0.2% 0.0% 0.0% direct: 0.0% skip:99.8% L0:25.1% L1:74.9% BI: 0.0%
[libx264 @ 0x1d966a0] 8x8 transform intra:63.6% inter:75.9%
[libx264 @ 0x1d966a0] coded y,uvDC,uvAC intra: 61.5% 53.4% 24.4% inter: 0.5% 0.5% 0.0%
[libx264 @ 0x1d966a0] i16 v,h,dc,p: 52% 19% 19% 11%
[libx264 @ 0x1d966a0] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 32% 17% 13% 4% 6% 9% 5% 8% 6%
[libx264 @ 0x1d966a0] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 30% 18% 14% 5% 8% 10% 6% 6% 3%
[libx264 @ 0x1d966a0] i8c dc,h,v,p: 55% 17% 24% 4%
[libx264 @ 0x1d966a0] Weighted P-Frames: Y:0.0% UV:0.0%
[libx264 @ 0x1d966a0] ref P L0: 82.5% 13.2% 4.0% 0.3%
[libx264 @ 0x1d966a0] ref B L0: 60.2% 39.2% 0.6%
[libx264 @ 0x1d966a0] ref B L1: 98.5% 1.5%
[libx264 @ 0x1d966a0] kb/s:4327.77