Recherche avancée
Médias (91)
-
999,999
26 septembre 2011, par
Mis à jour : Septembre 2011
Langue : English
Type : Audio
-
The Slip - Artworks
26 septembre 2011, par
Mis à jour : Septembre 2011
Langue : English
Type : Texte
-
Demon seed (wav version)
26 septembre 2011, par
Mis à jour : Avril 2013
Langue : English
Type : Audio
-
The four of us are dying (wav version)
26 septembre 2011, par
Mis à jour : Avril 2013
Langue : English
Type : Audio
-
Corona radiata (wav version)
26 septembre 2011, par
Mis à jour : Avril 2013
Langue : English
Type : Audio
-
Lights in the sky (wav version)
26 septembre 2011, par
Mis à jour : Avril 2013
Langue : English
Type : Audio
Autres articles (48)
-
HTML5 audio and video support
13 avril 2011, parMediaSPIP uses HTML5 video and audio tags to play multimedia files, taking advantage of the latest W3C innovations supported by modern browsers.
The MediaSPIP player used has been created specifically for MediaSPIP and can be easily adapted to fit in with a specific theme.
For older browsers the Flowplayer flash fallback is used.
MediaSPIP allows for media playback on major mobile platforms with the above (...) -
Support audio et vidéo HTML5
10 avril 2011MediaSPIP utilise les balises HTML5 video et audio pour la lecture de documents multimedia en profitant des dernières innovations du W3C supportées par les navigateurs modernes.
Pour les navigateurs plus anciens, le lecteur flash Flowplayer est utilisé.
Le lecteur HTML5 utilisé a été spécifiquement créé pour MediaSPIP : il est complètement modifiable graphiquement pour correspondre à un thème choisi.
Ces technologies permettent de distribuer vidéo et son à la fois sur des ordinateurs conventionnels (...) -
Librairies et binaires spécifiques au traitement vidéo et sonore
31 janvier 2010, parLes logiciels et librairies suivantes sont utilisées par SPIPmotion d’une manière ou d’une autre.
Binaires obligatoires FFMpeg : encodeur principal, permet de transcoder presque tous les types de fichiers vidéo et sonores dans les formats lisibles sur Internet. CF ce tutoriel pour son installation ; Oggz-tools : outils d’inspection de fichiers ogg ; Mediainfo : récupération d’informations depuis la plupart des formats vidéos et sonores ;
Binaires complémentaires et facultatifs flvtool2 : (...)
Sur d’autres sites (5738)
-
libavformat/libavcodec providing invalid container header
14 décembre 2017, par seanr8I’m using libavcodec to encode a stream to h264 and libavformat to store it in an mp4. The resulting container has an invalid header that can be played in VLC, but not any other player.
I’ve found that using the mp4 container and the "mpeg4" codec produces a valid mp4 file, but using libx265 (HEVC) or the libx264 codec produces invalid mp4s.
I can use
ffmpeg -i invalid.mp4 -vcodec copy valid.mp4and I get a file of almost the exact same size, but in a valid container.Examples of these files are here : Broken file and
Repaied file [use the download links in the upper right to examine]I used a hex editor to see the differences in the headers of the two files and the invalid one is 1 byte smaller than the valid one.
The code I’m using to open the container and codec and to write the header is here :
AVOutputFormat *container_format;
AVFormatContext *container_format_context;
AVStream *video_stream;
int ret;
/* allocate the output media context */
avformat_alloc_output_context2(&container_format_context, NULL, NULL, out_file);
if (!container_format_context) {
log(INFO, "Unable to determine container format from filename, exiting\n");
exit(1);
}
else {
log(INFO, "Using container %s\n", container_format_context->oformat->name);
}
if (!container_format_context) {
log(ERROR, "Could not build container format context. Encoding failed.");
exit(1);
}
container_format = container_format_context->oformat;
/* Pull codec based on name */
AVCodec* codec = avcodec_find_encoder_by_name(codec_name);
if (codec == NULL) {
log(ERROR, "Failed to locate codec \"%s\".",
codec_name);
exit(1);
}
/* create stream */
video_stream = NULL;
video_stream = avformat_new_stream(container_format_context, codec);
if (!video_stream) {
log(ERROR, "Could not allocate encoder stream. Cannot continue.\n");
exit(1);
}
video_stream->id = container_format_context->nb_streams - 1;
video_stream->time_base = video_stream->codec->time_base = (AVRational) { 1, 25};
av_dump_format(container_format_context, 0, out_file, 1);
/* Retrieve encoding context */
AVCodecContext* avcodec_context = video_stream->codec;
if (avcodec_context == NULL) {
log(ERROR, "Failed to allocate context for "
"codec \"%s\".", codec_name);
exit(1);
}
/* Init context with encoding parameters */
avcodec_context->bit_rate = bitrate;
avcodec_context->width = width;
avcodec_context->height = height;
avcodec_context->gop_size = 10;
avcodec_context->max_b_frames = 1;
avcodec_context->qmax = 31;
avcodec_context->qmin = 2;
avcodec_context->pix_fmt = AV_PIX_FMT_YUV420P;
av_dump_format(container_format_context, 0, out_file, 1);
/* Open codec for use */
if (avcodec_open2(avcodec_context, codec, NULL) < 0) {
log(ERROR, "Failed to open codec \"%s\".", codec_name);
exit(1);
}
/* Allocate corresponding frame */
AVFrame* frame = av_frame_alloc();
if (frame == NULL) {
exit(1);
}
/* Copy necessary data for frame from avcodec_context */
frame->format = avcodec_context->pix_fmt;
frame->width = avcodec_context->width;
frame->height = avcodec_context->height;
/* Allocate actual backing data for frame */
if (av_image_alloc(frame->data, frame->linesize, frame->width,
frame->height, frame->format, 32) < 0) {
exit(1);
}
/* open the output file, if the container needs it */
if (!(container_format->flags & AVFMT_NOFILE)) {
ret = avio_open(&container_format_context->pb, out_file, AVIO_FLAG_WRITE);
if (ret < 0) {
log(ERROR, "Error occurred while opening output file: %s\n",
av_err2str(ret));
exit(1);
}
}
/* write the stream header, if needed */
ret = avformat_write_header(container_format_context, NULL);
if (ret < 0) {
log(ERROR, "Error occurred while writing output file header: %s\n",
av_err2str(ret));
}The code to encode a frame is here :
/* Init video packet */
AVPacket packet;
av_init_packet(&packet);
/* Request that encoder allocate data for packet */
packet.data = NULL;
packet.size = 0;
/* Write frame to video */
int got_data;
if (avcodec_encode_video2(avcontext, &packet, frame, &got_data) < 0) {
log(WARNING, "Error encoding frame #%" PRId64,
video_struct->next_pts);
return -1;
}
/* Write corresponding data to file */
if (got_data) {
if (packet.pts != AV_NOPTS_VALUE) {
packet.pts = av_rescale_q(packet.pts, video_struct->output_stream->codec->time_base, video_struct->output_stream->time_base);
}
if (packet.dts != AV_NOPTS_VALUE) {
packet.dts = av_rescale_q(packet.dts, video_struct->output_stream->codec->time_base, video_struct->output_stream->time_base);
}
write_packet(video_struct, &packet, packet.size);
av_packet_unref(&packet);
}And the code to write the packet to the video stream :
static int write_packet(video_struct* video, void* data, int size) {
int ret;
/* use AVStream is not null, otherwise write to output fd */
AVPacket *pkt = (AVPacket*) data;
pkt->stream_index = video->output_stream->index;
ret = av_interleaved_write_frame(video->container_format_context, pkt);
if (ret != 0) {
return -1;
}
/* Data was written successfully */
return ret;
} -
libavformat/libavcodec providing invalid container header
14 décembre 2017, par seanr8I’m using libavcodec to encode a stream to h264 and libavformat to store it in an mp4. The resulting container has an invalid header that can be played in VLC, but not any other player.
I’ve found that using the mp4 container and the "mpeg4" codec produces a valid mp4 file, but using libx265 (HEVC) or the libx264 codec produces invalid mp4s.
I can use
ffmpeg -i invalid.mp4 -vcodec copy valid.mp4and I get a file of almost the exact same size, but in a valid container.Examples of these files are here : Broken file and
Repaied file [use the download links in the upper right to examine]I used a hex editor to see the differences in the headers of the two files and the invalid one is 1 byte smaller than the valid one.
The code I’m using to open the container and codec and to write the header is here :
AVOutputFormat *container_format;
AVFormatContext *container_format_context;
AVStream *video_stream;
int ret;
/* allocate the output media context */
avformat_alloc_output_context2(&container_format_context, NULL, NULL, out_file);
if (!container_format_context) {
log(INFO, "Unable to determine container format from filename, exiting\n");
exit(1);
}
else {
log(INFO, "Using container %s\n", container_format_context->oformat->name);
}
if (!container_format_context) {
log(ERROR, "Could not build container format context. Encoding failed.");
exit(1);
}
container_format = container_format_context->oformat;
/* Pull codec based on name */
AVCodec* codec = avcodec_find_encoder_by_name(codec_name);
if (codec == NULL) {
log(ERROR, "Failed to locate codec \"%s\".",
codec_name);
exit(1);
}
/* create stream */
video_stream = NULL;
video_stream = avformat_new_stream(container_format_context, codec);
if (!video_stream) {
log(ERROR, "Could not allocate encoder stream. Cannot continue.\n");
exit(1);
}
video_stream->id = container_format_context->nb_streams - 1;
video_stream->time_base = video_stream->codec->time_base = (AVRational) { 1, 25};
av_dump_format(container_format_context, 0, out_file, 1);
/* Retrieve encoding context */
AVCodecContext* avcodec_context = video_stream->codec;
if (avcodec_context == NULL) {
log(ERROR, "Failed to allocate context for "
"codec \"%s\".", codec_name);
exit(1);
}
/* Init context with encoding parameters */
avcodec_context->bit_rate = bitrate;
avcodec_context->width = width;
avcodec_context->height = height;
avcodec_context->gop_size = 10;
avcodec_context->max_b_frames = 1;
avcodec_context->qmax = 31;
avcodec_context->qmin = 2;
avcodec_context->pix_fmt = AV_PIX_FMT_YUV420P;
av_dump_format(container_format_context, 0, out_file, 1);
/* Open codec for use */
if (avcodec_open2(avcodec_context, codec, NULL) < 0) {
log(ERROR, "Failed to open codec \"%s\".", codec_name);
exit(1);
}
/* Allocate corresponding frame */
AVFrame* frame = av_frame_alloc();
if (frame == NULL) {
exit(1);
}
/* Copy necessary data for frame from avcodec_context */
frame->format = avcodec_context->pix_fmt;
frame->width = avcodec_context->width;
frame->height = avcodec_context->height;
/* Allocate actual backing data for frame */
if (av_image_alloc(frame->data, frame->linesize, frame->width,
frame->height, frame->format, 32) < 0) {
exit(1);
}
/* open the output file, if the container needs it */
if (!(container_format->flags & AVFMT_NOFILE)) {
ret = avio_open(&container_format_context->pb, out_file, AVIO_FLAG_WRITE);
if (ret < 0) {
log(ERROR, "Error occurred while opening output file: %s\n",
av_err2str(ret));
exit(1);
}
}
/* write the stream header, if needed */
ret = avformat_write_header(container_format_context, NULL);
if (ret < 0) {
log(ERROR, "Error occurred while writing output file header: %s\n",
av_err2str(ret));
}The code to encode a frame is here :
/* Init video packet */
AVPacket packet;
av_init_packet(&packet);
/* Request that encoder allocate data for packet */
packet.data = NULL;
packet.size = 0;
/* Write frame to video */
int got_data;
if (avcodec_encode_video2(avcontext, &packet, frame, &got_data) < 0) {
log(WARNING, "Error encoding frame #%" PRId64,
video_struct->next_pts);
return -1;
}
/* Write corresponding data to file */
if (got_data) {
if (packet.pts != AV_NOPTS_VALUE) {
packet.pts = av_rescale_q(packet.pts, video_struct->output_stream->codec->time_base, video_struct->output_stream->time_base);
}
if (packet.dts != AV_NOPTS_VALUE) {
packet.dts = av_rescale_q(packet.dts, video_struct->output_stream->codec->time_base, video_struct->output_stream->time_base);
}
write_packet(video_struct, &packet, packet.size);
av_packet_unref(&packet);
}And the code to write the packet to the video stream :
static int write_packet(video_struct* video, void* data, int size) {
int ret;
/* use AVStream is not null, otherwise write to output fd */
AVPacket *pkt = (AVPacket*) data;
pkt->stream_index = video->output_stream->index;
ret = av_interleaved_write_frame(video->container_format_context, pkt);
if (ret != 0) {
return -1;
}
/* Data was written successfully */
return ret;
} -
Seeking in Libav / FFMPEG a DASH stream
23 janvier 2018, par Glen RhodesRecently, the functionality for playing DASH format files (mpd) was added to Libav. I’m trying to determine the best way to seek forward in the stream.
When I use av_seek_frame, it does go to the correct time, but there’s a considerable delay which makes me think it’s not properly jumping to a segment / byte offset in the HTTP request, but rather just downloading with all its might until it arrives at the correct timestamp.
int ret = av_seek_frame(is->pFormatCtx, stream_index, seek_target, is->seek_flags);When I use avformat_seek_file, it only seems to go forward several seconds before just continuing to play. So if I start playback, and then seek to 50 seconds, it will jump to something like 12. If I do the same seek again, it’ll jump further ahead, but still not 50.. however if it eventually gets to 50, then I do avformat_seek_file, it will successfully jump back to 50 no problem. So it’s like it tries, and gives up.
int ret = avformat_seek_file(is->pFormatCtx, stream_index, INT64_MIN, tm, INT64_MAX, 0);Does anyone know how seeking is managed in the Libav dash playback ?
Syndiquer tout le site
