Recherche avancée

Sur d’autres sites (12166)

• Problems compiling ffmpeg on windows using cygwin

  26 mai 2014, par Papajohn000

  I’ve been having a lot of trouble recently compiling ffmpeg on windows. I’m currently using the cgywin terminal to run the code. I’ve tried following many of the most popular tutorials on the web but I can’t seem to get it to work. I’m currently using this tutorial as a guide http://www.roman10.net/how-to-build-ffmpeg-for-android/

  Where I’m at :

  I’ve created a bash script

  #!/bin/bash
  
  
  
  NDK=C:/Users/jrblain/Development/adt-bundle-windows-x86_64-20130514/android-ndk-r9
  
  PLATFORM=$NDK/platforms/android-8/arch-arm/
  
  PREBUILT=$NDK/toolchains/arm-linux-androideabi-4.6/prebuilt/windows-x86_64
  
  function build_one
  
  {
  
  ./configure --target-os=linux \
  
      --prefix=$PREFIX \
  
      --enable-cross-compile \
  
      --extra-libs="-lgcc" \
  
      --arch=arm \
  
      --cc=$PREBUILT/bin/arm-linux-androideabi-gcc \
  
      --cross-prefix=$PREBUILT/bin/arm-linux-androideabi- \
  
      --nm=$PREBUILT/bin/arm-linux-androideabi-nm \
  
      --sysroot=$PLATFORM \
  
      --extra-cflags=" -O3 -fpic -DANDROID -DHAVE_SYS_UIO_H=1 -Dipv6mr_interface=ipv6mr_ifindex -fasm -Wno-psabi -fno-short-enums -fno-strict-aliasing -finline-limit=300 $OPTIMIZE_CFLAGS " \
  
      --disable-shared \
  
      --enable-static \
  
      --extra-ldflags="-Wl,-rpath-link=$PLATFORM/usr/lib -L$PLATFORM/usr/lib -nostdlib -lc -lm -ldl -llog" \
  
      --disable-everything \
  
      --enable-demuxer=mov \
  
      --enable-demuxer=h264 \
  
      --disable-ffplay \
  
      --enable-protocol=file \
  
      --enable-avformat \
  
      --enable-avcodec \
  
      --enable-decoder=rawvideo \
  
      --enable-decoder=mjpeg \
  
      --enable-decoder=h263 \
  
      --enable-decoder=mpeg4 \
  
      --enable-decoder=h264 \
  
      --enable-parser=h264 \
  
      --disable-network \
  
      --enable-zlib \
  
      --disable-avfilter \
  
      --disable-avdevice \
  
      $ADDITIONAL_CONFIGURE_FLAG
  
  
  
  make clean
  
  make  -j4 install
  
  $PREBUILT/bin/arm-linux-androideabi-ar d libavcodec/libavcodec.a inverse.o
  
  $PREBUILT/bin/arm-linux-androideabi-ld -rpath-link=$PLATFORM/usr/lib -L$PLATFORM/usr/lib  -soname libffmpeg.so -shared -nostdlib  -z,noexecstack -Bsymbolic --whole-archive --no-undefined -o $PREFIX/libffmpeg.so libavcodec/libavcodec.a libavformat/libavformat.a libavutil/libavutil.a libswscale/libswscale.a -lc -lm -lz -ldl -llog  --warn-once  --dynamic-linker=/system/bin/linker $PREBUILT/lib/gcc/arm-linux-androideabi/4.4.3/libgcc.a
  
  }
  
  
  
  #arm v6
  
  #CPU=armv6
  
  #OPTIMIZE_CFLAGS="-marm -march=$CPU"
  
  #PREFIX=./android/$CPU 
  
  #ADDITIONAL_CONFIGURE_FLAG=
  
  #build_one
  
  
  
  #arm v7vfpv3
  
  CPU=armv7-a
  
  OPTIMIZE_CFLAGS="-mfloat-abi=softfp -mfpu=vfpv3-d16 -marm -march=$CPU "
  
  PREFIX=./android/$CPU
  
  ADDITIONAL_CONFIGURE_FLAG=
  
  build_one
  
  
  
  #arm v7vfp
  
  #CPU=armv7-a
  
  #OPTIMIZE_CFLAGS="-mfloat-abi=softfp -mfpu=vfp -marm -march=$CPU "
  
  #PREFIX=./android/$CPU-vfp
  
  #ADDITIONAL_CONFIGURE_FLAG=
  
  #build_one
  
  
  
  #arm v7n
  
  #CPU=armv7-a
  
  #OPTIMIZE_CFLAGS="-mfloat-abi=softfp -mfpu=neon -marm -march=$CPU -mtune=cortex-a8"
  
  #PREFIX=./android/$CPU 
  
  #ADDITIONAL_CONFIGURE_FLAG=--enable-neon
  
  #build_one
  
  
  
  #arm v6+vfp
  
  #CPU=armv6
  
  #OPTIMIZE_CFLAGS="-DCMP_HAVE_VFP -mfloat-abi=softfp -mfpu=vfp -marm -march=$CPU"
  
  #PREFIX=./android/${CPU}_vfp 
  
  #ADDITIONAL_CONFIGURE_FLAG=
  
  #build_one

  I then followed steps 4-6 of this post Does anyone find this useful ? - Compiling FFMPEG on Windows with Cywin and NDK r5 which consists of

  4 - Open the file 'configure' in the root of the FFMPEG directory in a text editor.
  
  
  
  5 - Comment out lines 2073, 2074 and 2075.
  
  
  
  6 - Below 2075, add the following line:
  
  
  
  TMPDIR=c:/cygwin/tmp

  When I ran the script in cgywin I got this result :

      install prefix            ./android/armv7-a
  
  source path               .
  
  C compiler                C:/Users/jrblain/Development/adt-bundle-windows-x86_64-20130514/android-ndk-r9/toolchains/arm-linux-androideabi-4.6/prebuilt/windows-x86_64/bin/arm-linux-androideabi-gcc
  
  ARCH                      arm (armv7-a)
  
  big-endian                no
  
  runtime cpu detection     yes
  
  ARMv5TE enabled           yes
  
  ARMv6 enabled             yes
  
  ARMv6T2 enabled           yes
  
  VFP enabled               yes
  
  NEON enabled              yes
  
  THUMB enabled             no
  
  debug symbols             yes
  
  strip symbols             yes
  
  optimize for size         no
  
  optimizations             yes
  
  static                    yes
  
  shared                    no
  
  postprocessing support    no
  
  new filter support        no
  
  network support           no
  
  threading support         pthreads
  
  safe bitstream reader     yes
  
  SDL support               no
  
  opencl enabled            no
  
  texi2html enabled         no
  
  perl enabled              no
  
  pod2man enabled           no
  
  makeinfo enabled          no
  
  
  
  External libraries:
  
  zlib
  
  
  
  Enabled decoders:
  
  h263                    mjpeg                   rawvideo
  
  h264                    mpeg4
  
  
  
  Enabled encoders:
  
  
  
  Enabled hwaccels:
  
  
  
  Enabled parsers:
  
  h263                    h264                    mpeg4video
  
  
  
  Enabled demuxers:
  
  h264                    mov
  
  
  
  Enabled muxers:
  
  
  
  Enabled protocols:
  
  file
  
  
  
  Enabled filters:
  
  
  
  Enabled bsfs:
  
  
  
  Enabled indevs:
  
  
  
  Enabled outdevs:
  
  
  
  License: LGPL version 2.1 or later
  
  Creating config.mak, config.h, and doc/config.texi...
  
  libavutil/avconfig.h is unchanged
  
  
  
  WARNING: C:/Users/jrblain/Development/adt-bundle-windows-x86_64-20130514/android-ndk-r9/toolchains/arm-linux-androideabi-4.6/prebuilt/windows-x86_64/bin/arm-linux-androideabi-pkg-config not found, library detection may fail.
  
  library.mak:105: *** missing separator.  Stop.
  
  library.mak:105: *** missing separator.  Stop.
  
  C:\Users\jrblain\Development\adt-bundle-windows-x86_64-20130514\android-ndk-r9\toolchains\arm-linux-androideabi-4.6\prebuilt\windows-x86_64\bin\arm-linux-androideabi-ld.exe: ,noexecstack: unknown -z option
  
  C:\Users\jrblain\Development\adt-bundle-windows-x86_64-20130514\android-ndk-r9\toolchains\arm-linux-androideabi-4.6\prebuilt\windows-x86_64\bin\arm-linux-androideabi-ld.exe: use the --help option for usage information

  After this script runs I get some new files within my ffmpeg folder. They are .config, config(header), config.mak , config.fate. The android folder is never created like it is supposed to. I’m also not sure where the library.mak error is coming from considering that it came with ffmpeg download.

  I’m not sure where this i’m going wrong in all of this. I feel like the fact that I’m using windows will make this build process different.

• R "only" substitute of the av package to split and convert an mp4 into multiple mp3 [closed]

  9 février 2024, par Bakaburg

  I am developing an R package that requires splitting an mp4 file into multiple segments and converting these segments into mp3 format. Currently, I use the av package for this task. However, av depends on the external ffmpeg tool, necessitating separate installation. This dependency complicates the setup for non-expert users of my package.

  


  I am seeking an alternative approach that either uses only R or incorporates a low-level solution directly within the package, eliminating the need for external tool installations. The goal is to streamline the user experience by minimizing setup complexity.

  


  Does anyone know of such a solution or approach that can substitute the functionality provided by av without external dependencies ?

  


• FFMPEG PNG sequence into mkv cause "inflate returned error -3" every 600-800 frames [closed]

  30 novembre 2023, par sergey9295

  I am new to ffmpeg. I try to use it for creating videos from png sequences. I have uncompressed pngs. All of them rgb24 format.

  


  But during encoding process I get inflate errors. I compared PNG and video frame by frame. And video have approximately 1 dupe frame every 600-800 frames instead of the ones that should be on that places. I tried another codecs, tried to clear png's EXIF(it made things even worse), made sure that memory was enough. Doesn't matter.

  


  The worst part is that this errors are pretty random. I encode one sequence 3 times and get 3 different sets of error-causing frames.

  


  FFMPEG was downloaded from official site.

  


  PS C:\Users\sergey9295\Desktop\Upscaler\bin> ./ffmpeg -framerate 24000/1001 -i 24o/frame%04d.png -c:v libx264 -qp 0 -r 24000/1001 -pix_fmt yuv420p BC108K.mkv
ffmpeg version N-112872-g67ce690bc6-20231128 Copyright (c) 2000-2023 the FFmpeg developers
  built with gcc 13.2.0 (crosstool-NG 1.25.0.232_c175b21)
  configuration: --prefix=/ffbuild/prefix --pkg-config-flags=--static --pkg-config=pkg-config --cross-prefix=x86_64-w64-mingw32- --arch=x86_64 --target-os=mingw32 --enable-gpl --enable-version3 --disable-debug --disable-w32threads --enable-pthreads --enable-iconv --enable-libxml2 --enable-zlib --enable-libfreetype --enable-libfribidi --enable-gmp --enable-lzma --enable-fontconfig --enable-libharfbuzz --enable-libvorbis --enable-opencl --disable-libpulse --enable-libvmaf --disable-libxcb --disable-xlib --enable-amf --enable-libaom --enable-libaribb24 --enable-avisynth --enable-chromaprint --enable-libdav1d --enable-libdavs2 --disable-libfdk-aac --enable-ffnvcodec --enable-cuda-llvm --enable-frei0r --enable-libgme --enable-libkvazaar --enable-libaribcaption --enable-libass --enable-libbluray --enable-libjxl --enable-libmp3lame --enable-libopus --enable-librist --enable-libssh --enable-libtheora --enable-libvpx --enable-libwebp --enable-lv2 --enable-libvpl --enable-openal --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenh264 --enable-libopenjpeg --enable-libopenmpt --enable-librav1e --enable-librubberband --enable-schannel --enable-sdl2 --enable-libsoxr --enable-libsrt --enable-libsvtav1 --enable-libtwolame --enable-libuavs3d --disable-libdrm --enable-vaapi --enable-libvidstab --enable-vulkan --enable-libshaderc --enable-libplacebo --enable-libx264 --enable-libx265 --enable-libxavs2 --enable-libxvid --enable-libzimg --enable-libzvbi --extra-cflags=-DLIBTWOLAME_STATIC --extra-cxxflags= --extra-ldflags=-pthread --extra-ldexeflags= --extra-libs=-lgomp --extra-version=20231128
  libavutil      58. 32.100 / 58. 32.100
  libavcodec     60. 35.100 / 60. 35.100
  libavformat    60. 18.100 / 60. 18.100
  libavdevice    60.  4.100 / 60.  4.100
  libavfilter     9. 13.100 /  9. 13.100
  libswscale      7.  6.100 /  7.  6.100
  libswresample   4. 13.100 /  4. 13.100
  libpostproc    57.  4.100 / 57.  4.100
Input #0, image2, from '24o/frame%04d.png':
  Duration: 00:01:32.09, start: 0.000000, bitrate: N/A
  Stream #0:0: Video: png, rgb24(pc, gbr/bt709/iec61966-2-1), 7680x4320, 23.98 fps, 23.98 tbr, 23.98 tbn
Stream mapping:
  Stream #0:0 -> #0:0 (png (native) -> h264 (libx264))
Press [q] to stop, [?] for help
[libx264 @ 00000231363c6280] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 BMI2 AVX2
[libx264 @ 00000231363c6280] profile High 4:4:4 Predictive, level 6.0, 4:2:0, 8-bit
[libx264 @ 00000231363c6280] 64 - core 164 - H.264/MPEG-4 AVC codec - Copyleft 2003-2023 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=0 mixed_ref=1 me_range=16 chroma_me=1 trellis=0 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=0 chroma_qp_offset=0 threads=18 lookahead_threads=3 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=0 weightp=2 keyint=250 keyint_min=23 scenecut=40 intra_refresh=0 rc=cqp mbtree=0 qp=0
Output #0, matroska, to 'BC108K.mkv':
  Metadata:
    encoder         : Lavf60.18.100
  Stream #0:0: Video: h264 (H264 / 0x34363248), yuv420p(tv, unknown/bt709/iec61966-2-1, progressive), 7680x4320, q=2-31, 23.98 fps, 1k tbn
    Metadata:
      encoder         : Lavc60.35.100 libx264
    Side data:
      cpb: bitrate max/min/avg: 0/0/0 buffer size: 0 vbv_delay: N/A
[png @ 00000231363c8880] inflate returned error -301:02.72 bitrate=698356.0kbits/s speed=0.171x
[vist#0:0/png @ 00000231363c16c0] Error submitting packet to decoder: Generic error in an external library
[png @ 00000231363c8880] inflate returned error -301:15.24 bitrate=679969.1kbits/s dup=1 drop=0 speed=0.172x
[vist#0:0/png @ 00000231363c16c0] Error submitting packet to decoder: Generic error in an external library3x
[png @ 00000231363f32c0] inflate returned error -301:16.65 bitrate=694583.2kbits/s dup=2 drop=0 speed=0.171x
[vist#0:0/png @ 00000231363c16c0] Error submitting packet to decoder: Generic error in an external library1x
[png @ 000002313646a100] inflate returned error -301:20.78 bitrate=742902.6kbits/s dup=3 drop=0 speed=0.167x
[vist#0:0/png @ 00000231363c16c0] Error submitting packet to decoder: Generic error in an external library6x
[png @ 000002313646ea00] inflate returned error -301:26.92 bitrate=839679.5kbits/s dup=4 drop=0 speed=0.159x
[vist#0:0/png @ 00000231363c16c0] Error submitting packet to decoder: Generic error in an external library8x
[png @ 00000231363cc740] inflate returned error -301:29.38 bitrate=874703.4kbits/s dup=5 drop=0 speed=0.156x
[vist#0:0/png @ 00000231363c16c0] Error submitting packet to decoder: Generic error in an external library6x
[out#0/matroska @ 00000231363a7200] video:9827779kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 0.000442%
frame= 2208 fps=3.8 q=-1.0 Lsize= 9827822kB time=00:01:32.05 bitrate=874625.3kbits/s dup=6 drop=0 speed=0.158x


  


  IMO the problem is zlib from libpng. But I don't have skills to recompile it with libspng that doesn't require zlib. Maybe there is a ffmpeg version without this error ?