Recherche avancée

Sur d’autres sites (7065)

• FFMPEG Streaming Issue - "Connection Failed : I/O Error"

  25 avril 2023, par 1080Jake

  For a fun project I wanted to see if I could create an SRT stream from an active SDI input (1080i59.94) on a BMD Decklink Quad card. Whenever I try to execute my syntax, I get the following prompt "Connection to srt ://127.0.0.1:1234 failed : I/O error"
Is there anyway to use a debug mode and get more details about what is causing this ? I am very new to FFMPEG and obviously clueless. This is the syntax I am trying to execute -

  


  C:\Users\01>ffmpeg -f decklink -i "DeckLink Quad (8)" -c:v libx265 -preset ultrafast -b:v 5000k -f mpegts srt://127.0.0.1:1234


  


  Full printout here -

  


  C:\Users\01>ffmpeg -f decklink -i "DeckLink Quad (8)" -c:v libx265 -preset ultrafast -b:v 5000k -bufsize 3000k -f mpegts srt://127.0.0.1:1234
ffmpeg version n6.0-ffmpeg-windows-build-helpers Copyright (c) 2000-2023 the FFmpeg developers
  built with gcc 10.2.0 (GCC)
  configuration: --pkg-config=pkg-config --pkg-config-flags=--static --extra-version=ffmpeg-windows-build-helpers --enable-version3 --disable-debug --disable-w32threads --arch=x86_64 --target-os=mingw32 --cross-prefix=/home/runner/work/ffmpeg-stable-autobuild/ffmpeg-stable-autobuild/sandbox/cross_compilers/mingw-w64-x86_64/bin/x86_64-w64-mingw32- --enable-libcaca --enable-gray --enable-libtesseract --enable-fontconfig --enable-gmp --enable-libass --enable-libbluray --enable-libbs2b --enable-libflite --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libilbc --enable-libmodplug --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopus --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libtheora --enable-libtwolame --enable-libvo-amrwbenc --enable-libvorbis --enable-libwebp --enable-libzimg --enable-libzvbi --enable-libmysofa --enable-libopenjpeg --enable-libopenh264 --enable-libvmaf --enable-libsrt --enable-libxml2 --enable-opengl --enable-libdav1d --enable-cuda-llvm --enable-gnutls --enable-libsvtav1 --enable-libvpx --enable-libaom --enable-nvenc --enable-nvdec --extra-libs=-lharfbuzz --extra-libs=-lm --extra-libs=-lshlwapi --extra-libs=-lmpg123 --extra-libs=-lpthread --extra-cflags=-DLIBTWOLAME_STATIC --extra-cflags=-DMODPLUG_STATIC --extra-cflags=-DCACA_STATIC --enable-amf --enable-libmfx --enable-gpl --enable-frei0r --enable-librubberband --enable-libvidstab --enable-libx264 --enable-libx265 --enable-avisynth --enable-libaribb24 --enable-libxvid --enable-libdavs2 --enable-libxavs2 --enable-libxavs --extra-cflags='-mtune=generic' --extra-cflags=-O3 --enable-static --disable-shared --prefix=/home/runner/work/ffmpeg-stable-autobuild/ffmpeg-stable-autobuild/sandbox/cross_compilers/mingw-w64-x86_64/x86_64-w64-mingw32 --enable-nonfree --enable-libfdk-aac --enable-decklink
  libavutil      58.  2.100 / 58.  2.100
  libavcodec     60.  3.100 / 60.  3.100
  libavformat    60.  3.100 / 60.  3.100
  libavdevice    60.  1.100 / 60.  1.100
  libavfilter     9.  3.100 /  9.  3.100
  libswscale      7.  1.100 /  7.  1.100
  libswresample   4. 10.100 /  4. 10.100
  libpostproc    57.  1.100 / 57.  1.100
[decklink @ 000002ad2785a6c0] Autodetected the input mode
[decklink @ 000002ad2785a6c0] Found Decklink mode 1920 x 1080 with rate 29.97(i)
Guessed Channel Layout for Input Stream #0.0 : stereo
Input #0, decklink, from 'DeckLink Quad (8)':
  Duration: N/A, start: 0.000000, bitrate: 995869 kb/s
  Stream #0:0: Audio: pcm_s16le, 48000 Hz, 2 channels, s16, 1536 kb/s
  Stream #0:1: Video: rawvideo (UYVY / 0x59565955), uyvy422(top first), 1920x1080, 994333 kb/s, 29.97 tbr, 1000k tbn
[srt @ 000002ad2a870dc0] Connection to srt://127.0.0.1:1234 failed: I/O error
srt://127.0.0.1:1234: I/O error


  


  Instead of using an SDI input from my BMD card, I also tried to use a local mp4 file on my PC but I get the same prompt. Note - I am running FFMPEG on a Windows 10 PC.

  


• Discord bot stops playing music at a certain iteration

  3 mai 2023, par denisnumb

  I'm using the following code to play music in a discord voice channel :

  


  import discord
import asyncio
from yt_dlp import YoutubeDL

YDL_OPTIONS = {
    'format': 'bestaudio/best', 
}

FFMPEG_OPTIONS = {
    'before_options': '-reconnect 1 -reconnect_streamed 1 -reconnect_delay_max 5', 
    'options': '-vn'
}

bot = discord.Client(intents=discord.Intents.all())

async def get_source_url(url: str) -> str:
    with YoutubeDL(YDL_OPTIONS) as ydl:
        return ydl.extract_info(url, download=False).get('url')

@bot.slash_command(name='play')
async def __play(ctx, url: str) -> None:
    source = await get_source_url(url)
    vc = await ctx.author.voice.channel.connect()
    vc.play(discord.FFmpegPCMAudio(source=source, **FFMPEG_OPTIONS))

    while vc.is_playing() or vc.is_paused():
        await asyncio.sleep(1)

    await vc.disconnect()

bot.run('TOKEN')


  


  The principle of operation is as follows :

  


  


  1. The /play command handler receives a url argument, in the form of a link to a live stream from YouTube : https://youtu.be/jfKfPfyJRdk (or any other video)

     


  


  2. The link is passed to the get_source_url function, which, using the yt-dlp library, returns a direct link to the sound from the video

     


  


  3. The direct link is passed via discord.FFmpegPCMAudio to the ffmpeg program, which then returns audio bytes for transmission to the discord voice channel via the vc.play method

     


  


  


  ---

  


  Problem :

  


  Bot is hosted on the virtual hosting server aeza, OS - Ubuntu Server 22.04. I installed the ffmpeg version 4.4.2 with the command sudo apt install ffmpeg.

  


  On the first day everything worked fine, but the next day the bot began to steadily stop playing music at the same moment in different videos (this moment is different for each video). Restarting the bot or server did not help.

  


  Only reinstalling the operating system helps, but also only for one day.

  


  Specific problem :

  


  I checked the execution of every single line of the discord.VoiceClient.play method, including all methods called internally. It turned out that the bot hangs every time on the same iteration of the cycle of receiving and sending bytes. Namely, on the first line of the discord.FFmpegPCMAudio.read method, that is does not receive data from ffmpeg and waits indefinitely.

  


  ---

  


  Source of the problem :

  


  The problem is not with a specific ffmpeg :

  


  

  • I also installed ffmpeg on another version 5.1.2 and the problem was repeated on it.

  


  


  The problem is not Ubuntu Server :

  


  

  • I changed OS Ubuntu Server to Debian 11 and it's the same there

  


  


  The problem is not in Linux :

  


  

  • When I put the same OS on my virtual machine, everything worked fine with any version of ffmpeg.

  


  


  ---

  


  So the problem is on the hosting side ? I asked those. support to change the server itself and the location of the location. Changed from Sweden to Germany - the same result.

  


  If the data does not come from ffmpeg, then you need to find out what is wrong in the program itself. When calling, I pass the -loglevel debug argument, which shows the most detailed report on the program's operation - all debugging information is displayed, but there are no errors on the "hung" iteration.

  


  What could be the problem ?

  


  ---

  


  UPD 03.05.2023 : I reinstalled OS Ubuntu Server again and the bot works now. But obviously not for long. Maybe I need to clear some cache ?

  


• AVCodec h264_v4l2m2m hardware decoding unable to find device

  26 juillet 2023, par nathansizemore

  Using a custom compiled FFmpeg :

  


   $ ./ffmpeg -codecs | grep h264
ffmpeg version n6.0 Copyright (c) 2000-2023 the FFmpeg developers
  built with gcc 7 (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04)
  configuration: --arch=aarch64 --enable-cross-compile --target-os=linux --cross-prefix=aarch64-linux-gnu- --prefix=/builds/dronesense/rust/ffmpeg-build/ffmpeg/out --pkgconfigdir= --pkg-config=pkg-config --extra-libs='-ldl -lpthread' --enable-libvpx --enable-libx264 --enable-libx265 --enable-decklink --enable-gpl --enable-nonfree --enable-shared --disable-static
  libavutil      58.  2.100 / 58.  2.100
  libavcodec     60.  3.100 / 60.  3.100
  libavformat    60.  3.100 / 60.  3.100
  libavdevice    60.  1.100 / 60.  1.100
  libavfilter     9.  3.100 /  9.  3.100
  libswscale      7.  1.100 /  7.  1.100
  libswresample   4. 10.100 /  4. 10.100
  libpostproc    57.  1.100 / 57.  1.100
 DEV.LS h264                 H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10 (decoders: h264 h264_v4l2m2m ) (encoders: libx264 libx264rgb h264_v4l2m2m )


  


  /dev/video32 seems to have H.264 decoding support :

  


  $ v4l2-ctl --list-formats-out -d /dev/video32
ioctl: VIDIOC_ENUM_FMT
    Index       : 0
    Type        : Video Output Multiplanar
    Pixel Format: 'MPG2' (compressed)
    Name        : MPEG-2 ES

    Index       : 1
    Type        : Video Output Multiplanar
    Pixel Format: 'H264' (compressed)
    Name        : H.264

    Index       : 2
    Type        : Video Output Multiplanar
    Pixel Format: 'HEVC' (compressed)
    Name        : HEVC

    Index       : 3
    Type        : Video Output Multiplanar
    Pixel Format: 'VP80' (compressed)
    Name        : VP8

    Index       : 4
    Type        : Video Output Multiplanar
    Pixel Format: 'VP90' (compressed)
    Name        : VP9


  


  I've tried two approaches (Rust with bindgen) :

  


  Approach 1 :

  


  fn init_decoder() -> Arc<contextwrapper> {&#xA;    let name = CString::new("h264_v4l2m2m").unwrap();&#xA;    let codec = unsafe { ffmpeg::avcodec_find_decoder_by_name(name.as_ptr()) };&#xA;    if codec.is_null() {&#xA;        error!("finding codec");&#xA;        process::exit(1);&#xA;    }&#xA;&#xA;    let ctx = unsafe { ffmpeg::avcodec_alloc_context3(codec) };&#xA;    if ctx.is_null() {&#xA;        error!("creating context");&#xA;        process::exit(1);&#xA;    }&#xA;&#xA;    let r = unsafe { ffmpeg::avcodec_open2(ctx, codec, ptr::null_mut()) };&#xA;    if r &lt; 0 {&#xA;        error!("opening codec: {r}");&#xA;        process::exit(1);&#xA;    }&#xA;&#xA;    Arc::new(ContextWrapper(ctx))&#xA;}&#xA;</contextwrapper>

  


  Results in :

  


  [h264_v4l2m2m @ 0x7f1c001600] Could not find a valid device
[h264_v4l2m2m @ 0x7f1c001600] can't configure decoder
[ERROR] [decoder] [webrtc::codec] opening codec: -1


  


  Approach 2

  


  fn init_decoder() -> Arc<contextwrapper> {&#xA;    let name = CString::new("h264_v4l2m2m").unwrap();&#xA;    let codec = unsafe { ffmpeg::avcodec_find_decoder_by_name(name.as_ptr()) };&#xA;    if codec.is_null() {&#xA;        error!("finding codec");&#xA;        process::exit(1);&#xA;    }&#xA;&#xA;    let mut i = 0;&#xA;    let mut hw_pix_fmt: AVPixelFormat = unsafe { mem::zeroed() };&#xA;    loop {&#xA;        let config = unsafe { ffmpeg::avcodec_get_hw_config(codec, i) };&#xA;        if config.is_null() {&#xA;            error!("decoder not supported");&#xA;            process::exit(1);&#xA;        }&#xA;&#xA;        unsafe {&#xA;            info!("device type: {:?}", (*config).device_type);&#xA;            if ((*config).methods &amp; ffmpeg::AV_CODEC_HW_CONFIG_METHOD_HW_DEVICE_CTX as i32) > 0 {&#xA;                hw_pix_fmt = (*config).pix_fmt;&#xA;                break;&#xA;            }&#xA;        }&#xA;    }&#xA;&#xA;    info!("pixel format: {:?}", hw_pix_fmt);&#xA;&#xA;    let ctx = unsafe { ffmpeg::avcodec_alloc_context3(codec) };&#xA;    if ctx.is_null() {&#xA;        error!("creating context");&#xA;        process::exit(1);&#xA;    }&#xA;&#xA;    let r = unsafe { ffmpeg::avcodec_open2(ctx, codec, ptr::null_mut()) };&#xA;    if r &lt; 0 {&#xA;        error!("opening codec: {r}");&#xA;        process::exit(1);&#xA;    }&#xA;&#xA;    Arc::new(ContextWrapper(ctx))&#xA;}&#xA;&#xA;</contextwrapper>

  


  Results in :
error!("decoder not supported");

  


  I feel like there is a major step missing because looking at FFmpeg's Hardware Decode Example there are looking for a device type, to which v4l2 is not a part of the enum, so I do not what functions to call to get it setup.

  


  What is the proper way to setup an AVCodec decoder with H.264 hardware acceleration for v4l2m2m ?